arXiv subjects

Alexander Pelka

Publications and source records attributed to Alexander Pelka.

16 recordsLinked to original sources

arXiv2026

Direct High-Magnetic-Field Coupling to Stripe Order in a Cuprate Superconductor

Superconductivity in cuprates emerges out of a complex normal state that hosts density waves, pseudogap physics, and strange metal properties. Here, we access this normal state by synchronizing free-electron laser x-rays with high-magnetic-field pulses up to 44 T. We observe a linear increase in charge order amplitude and correlation length that persists far above the vortex melting transition. This behavior is incompatible with standard phase competition between charge order and superconductivity. By means of conventional hard x-ray diffraction and magnetostriction, we show that applied fields also enhance monoclinic lattice distortions. However, this magnetoelastic response is weaker and an epiphenomenon of the stripe order enhancement. Combined with recent observations of field-linear spin freezing, our results point to a direct coupling between magnetic field and the spin component of stripe order in the high-field normal state -- a mechanism independent of superconductivity suppression that has so far remained hidden from scattering probes.

cond-mat.str-el↗

arXiv2026

XFEL Imaging Techniques for High Energy Density and Inertial Fusion Energy Research at HED-HiBEF

The imaging platform developed at the High Energy Density - Helmholtz International Beamline for Extreme Fields (HED-HiBEF) instrument at the European XFEL and its applications to high energy density and fusion related research are presented. The platform combines the XFEL beam with the high-intensity short-pulse laser ReLaX and the high-energy nanosecond-pulse laser DiPOLE-100X. The spatial resolution is better than 500 nm and the temporal resolution of the order of 50 fs. We show examples of blast waves and converging cylindrical shocks in aluminium, resonant absorption measurements of specific charged states in copper with ReLaX and planar shocks in polystyrene material generated by DiPOLE-100X. We also discuss the possibilities introduced by combining this imaging platform with a kJ-class laser.

physics.plasm-ph↗

arXiv2025

Microscopy X-ray Imaging enriched with Small Angle X-ray Scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25-micrometer copper wires with 45-fs, 0.9-J, 800-nm pulses at 3.5e19 W/cm2 while probing with 8.2-keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with about 200-nm resolution, while SAXS quantifies their nanometer-scale sharpness through the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after roughly 18 ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of about 25 km/s and a lateral width of several tens of micrometers, demonstrating for the first time the direct observation of shock formation and decay at solid density with few-nanometer precision. This integrated XRM-SAXS method establishes a quantitative, multiscale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

physics.plasm-ph↗

arXiv2025

Probing laser-driven surface and subsurface dynamics via grazing-incidence XFEL scattering and diffraction

We demonstrate a grazing-incidence x-ray platform that simultaneously records time-resolved grazing-incidence small-angle x-ray scattering (GISAXS) and grazing-incidence x-ray diffraction (GID) from a femtosecond laser-irradiated gold film above the melting threshold, with picosecond resolution at an x-ray free-electron laser (XFEL). By tuning the x-ray incidence angle, the probe depth is set to tens of nanometers, enabling depth-selective sensitivity to near-surface dynamics. GISAXS resolves ultrafast changes in surface nanomorphology (correlation length, roughness), while GID quantifies subsurface lattice compression, grain orientation, melting, and recrystallization. The approach overcomes photon-flux limitations of synchrotron grazing-incidence geometries and provides stringent, time-resolved benchmarks for complex theoretical models of ultrafast laser-matter interaction and warm dense matter. Looking ahead, the same depth-selective methodology is well suited to inertial confinement fusion (ICF): it can visualize buried-interface perturbations and interfacial thermal resistance on micron to sub-micron scales that affect instability seeding and burn propagation.

physics.optics↗

arXiv2025

A Momentum-Resolved X-ray Thomson Scattering Benchmark of Electronic-Response Models in Warm Dense Aluminium

The robust diagnosis of conditions generated in warm dense matter (WDM) experiments remains a persistent challenge. Here we describe the measurement of shock-compressed aluminium at 50 GPa with angle-resolved femtosecond x-ray Thomson scattering (XRTS) over a wide range of scattering wavevectors at the European XFEL. The measured plasmon dispersion and line shape show that the de facto standard approach for analysing XRTS spectra, based on uniform-electron-gas models, systematically overestimates the resonance energy by up to 8 eV. We present an ab initio approach that agrees within the experimental uncertainty and demonstrates that accounting for shock-induced disorder is critical for interpreting shock-compressed systems, providing evidence that ab initio treatments are required for reliable XRTS inference in warm dense aluminium.

physics.plasm-ph↗

arXiv2025

Probing ultrafast heating and ionization dynamics in solid density plasmas with time-resolved resonant X-ray absorption and emission

Heating and ionization are among the most fundamental processes in relativistic laser--solid interactions; however, their spatiotemporal evolution remains challenging to capture experimentally. Here we present detailed diagnosis of high-intensity laser interactions with wire targets, leveraging the extreme spectral brightness of an X-ray free-electron laser in sub-picosecond time-resolved resonant X-ray emission spectroscopy and absorption imaging. Experimental results are compared with comprehensive simulations using atomic collisional--radiative models, particle-in-cell, and magnetohydrodynamics codes to elucidate the underlying physics. These multi-scale simulations reveal extreme sensitivity of basic plasma parameters with widely used models, such as temperature and ionization depth, which are able to be constrained by incorporating a detailed accounting of laser spatial profiles, pre-plasma conditions, and collisional processes. These results provide new insights into heating and ionization dynamics in the high-energy-density regime relevant to inertial fusion energy research, both as an experimental platform for accessing theoretically challenging conditions and as a benchmark for improving models of high-power laser--plasma interactions.

physics.plasm-ph↗

arXiv2025

Demonstration of full-scale spatio-temporal diagnostics of solid-density plasmas driven by an ultra-short relativistic laser pulse using an X-ray free-electron laser

Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance to the applications of laser plasma-based particle accelerators, creation of high energy-density matter, understanding of planetary science and laser-driven fusion energy. However, experimental efforts in this regime have been limited by the accessibility of over-critical density and spatio-temporal resolution of conventional diagnostics. Over the last decade, the advent of femtosecond brilliant hard X-ray free electron lasers (XFELs) is opening new horizons to break these limitations. Here, for the first time we present full-scale spatio-temporal measurements of solid-density plasma dynamics, including preplasma generation with tens of nanometer-scale length driven by the leading edge of a relativistic laser pulse, ultrafast heating and ionization at the main pulse arrival, laser-driven blast shock waves and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction. These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics such as small-angle X-ray scattering (SAXS), resonant X-ray emission spectroscopy (RXES), and propagation-based X-ray phase-contrast imaging (XPCI) simultaneously at the European XFEL-HED beamline station.

physics.plasm-ph↗

arXiv2025

High-Quality Ultra-Fast Total Scattering and Pair Distribution Function Data using an X-ray Free Electron Laser

High-quality total scattering data, a key tool for understanding atomic-scale structure in disordered materials, require stable instrumentation and access to high momentum transfers. This is now routine at dedicated synchrotron instrumentation using high-energy X-ray beams, but it is very challenging to measure a total scattering dataset in less than a few microseconds. This limits their effectiveness for capturing structural changes that occur at the much faster timescales of atomic motion. Current X-ray free-electron lasers (XFELs) provide femtosecond-pulsed X-ray beams with maximum energies of approximately 24 keV, giving the potential to measure total scattering and the attendant pair distribution functions (PDFs) on femtosecond timescales. Here, we show that this potential has been realised using the HED scientific instrument at the European XFEL and present normalised total scattering data for 0.35 \r{A}-1 < Q < 16.6 \r{A}-1 and their PDFs from a broad spectrum of materials, including crystalline, nanocrystalline and amorphous solids, liquids, and clusters in solution. We analyse the data using a variety of methods, including Rietveld refinement, small-box PDF refinement, joint reciprocal-real space refinement, cluster refinement, and Debye scattering analysis. The resolution function of the setup is also characterised. We conclusively show that high-quality data can be obtained from a single approximately 30 fs XFEL pulse. Our efforts not only significantly increase the existing maximum reported Q-range for an S(Q) measured at an XFEL but also mean that XFELs are now a viable X-ray source for the broad community of people using reciprocal space total scattering and PDF methods in their research.

cond-mat.mtrl-sci↗

arXiv2024

Effects of Mosaic Crystal Instrument Functions on X-ray Thomson Scattering Diagnostics

Mosaic crystals, with their high integrated reflectivities, are widely-employed in spectrometers used to diagnose high energy density systems. X-ray Thomson scattering (XRTS) has emerged as a powerful diagnostic tool of these systems, providing in principle direct access to important properties such as the temperature via detailed balance. However, the measured XRTS spectrum is broadened by the spectrometer instrument function (IF), and without careful consideration of the IF one risks misdiagnosing system conditions. Here, we consider in detail the IF of 40 $\mu$m and 100 $\mu$m mosaic HAPG crystals, and how the broadening varies across the spectrometer in an energy range of 6.7-8.6 keV. Notably, we find a strong asymmetry in the shape of the IF towards higher energies. As an example, we consider the effect of the asymmetry in the IF on the temperature inferred via XRTS for simulated 80 eV CH plasmas, and find that the temperature can be overestimated if an approximate symmetric IF is used. We therefore expect a detailed consideration of the full IF will have an important impact on system properties inferred via XRTS in both forward modelling and model-free approaches.

physics.plasm-ph↗

arXiv2024

(Sub-)picosecond surface correlations of femtosecond laser excited Al-coated multilayers observed by grazing-incidence x-ray scattering

Femtosecond high-intensity laser pulses at intensities surpassing $10^{14} \,\text{W}/\text{cm}^2$ can generate a diverse range of functional surface nanostructures. Achieving precise control over the production of these functional structures necessitates a thorough understanding of the surface morphology dynamics with nanometer-scale spatial resolution and picosecond-scale temporal resolution. In this study, we show that individual XFEL pulses can elucidate structural changes on surfaces induced by laser-generated plasmas, employing grazing-incidence small-angle x-ray scattering (GISAXS). Using aluminum-coated multilayer samples we can differentiate between ultrafast surface morphology dynamics and subsequent subsurface density dynamics, achieving nanometer-depth sensitivity and subpicosecond temporal resolution. The observed subsurface density dynamics serve to validate advanced simulation models depicting matter under extreme conditions. Our findings promise to unveil novel avenues for laser material nanoprocessing and high-energy-density science.

physics.plasm-ph↗

arXiv2024

X-ray induced grain boundary formation and grain rotation in Bi2Se3

Optimizing grain boundary characteristics in polycrystalline materials can improve their properties. Many processing methods have been developed for grain boundary manipulation, including the use of intense radiation in certain applications. In this work, we used X-ray free electron laser pulses to irradiate single-crystalline bismuth selenide (Bi2Se3) and observed grain boundary formation and subsequent grain rotation in response to the X-ray radiation. Our observations with simultaneous transmission X-ray microscopy and X-ray diffraction demonstrate how intense X- ray radiation can rapidly change size and texture of grains.

cond-mat.mtrl-sci↗

arXiv2024

Cylindrical compression of thin wires by irradiation with a Joule-class short pulse laser

Equation of state measurements at Jovian or stellar conditions are currently conducted by dynamic shock compression driven by multi-kilojoule multi-beam nanosecond-duration lasers. These experiments require precise design of the target and specific tailoring of the spatial and temporal laser profiles to reach the highest pressures. At the same time, the studies are limited by the low repetition rate of the lasers. Here, we show that by the irradiation of a thin wire with single beam Joule-class short-pulse laser, a converging cylindrical shock is generated compressing the wire material to conditions relevant for the above applications. The shockwave was observed using Phase Contrast Imaging employing a hard X-ray Free Electron Laser with unprecedented temporal and spatial sensitivity. The data collected for Cu wires is in agreement with hydrodynamic simulations of an ablative shock launched by a highly-impulsive and transient resistive heating of the wire surface. The subsequent cylindrical shockwave travels towards the wire axis and is predicted to reach a compression factor of 9 and pressures above 800 Mbar. Simulations for astrophysical relevant materials underline the potential of this compression technique as a new tool for high energy density studies at high repetition rates.

physics.plasm-ph↗

arXiv2023

Visualizing Plasmons and Ultrafast Kinetic Instabilities in Laser-Driven Solids using X-ray Scattering

Ultra-intense lasers that ionize and accelerate electrons in solids to near the speed of light can lead to kinetic instabilities that alter the laser absorption and subsequent electron transport, isochoric heating, and ion acceleration. These instabilities can be difficult to characterize, but a novel approach using X-ray scattering at keV energies allows for their visualization with femtosecond temporal resolution on the few nanometer mesoscale. Our experiments on laser-driven flat silicon membranes show the development of structure with a dominant scale of $~60\unit{nm}$ in the plane of the laser axis and laser polarization, and $~95\unit{nm}$ in the vertical direction with a growth rate faster than $0.1/\mathrm{fs}$. Combining the XFEL experiments with simulations provides a complete picture of the structural evolution of ultra-fast laser-induced instability development, indicating the excitation of surface plasmons and the growth of a new type of filamentation instability. These findings provide new insight into the ultra-fast instability processes in solids under extreme conditions at the nanometer level with important implications for inertial confinement fusion and laboratory astrophysics.

physics.plasm-ph↗

arXiv2023

Probing the dynamics of solid density micro-wire targets after ultra-intense laser irradiation using a free-electron laser

In this paper, we present an experiment that explores the plasma dynamics of a 7 micron diameter carbon wire after being irradiated with a near-relativistic-intensity short pulse laser. Using an X-ray Free Electron Laser pulse to measure the small angle X-ray scattering signal, we observe that the scattering surface is bent and prone to instability over tens of picoseconds. The dynamics of this process are consistent with the presence of a sharp, propagating shock front inside the wire, moving at a speed close to the hole boring velocity.

physics.plasm-ph↗

arXiv2020

Probing ultrafast laser plasma processes inside solids with resonant small-angle X-ray scattering

Extreme states of matter exist throughout the universe e.g. inside planetary cores, stars or astrophysical jets. Such conditions are generated in the laboratory in the interaction of powerful lasers with solids, and their evolution can be probed with femtosecond precision using ultra-short X-ray pulses to study laboratory astrophysics, laser-fusion research or compact particle acceleration. X-ray scattering (SAXS) patterns and their asymmetries occurring at X-ray energies of atomic bound-bound transitions contain information on the volumetric nanoscopic distribution of density, ionization and temperature. Buried heavy ion structures in high intensity laser irradiated solids expand on the nanometer scale following heat diffusion, and are heated to more than 2 million Kelvin. These experiments demonstrate resonant SAXS with the aim to better characterize dynamic processes in extreme laboratory plasmas.

physics.plasm-ph↗

arXiv2018

Observation of ultrafast solid-density plasma dynamics using femtosecond X-ray pulses from a free-electron laser

The complex physics of the interaction between short pulse high intensity lasers and solids is so far hardly accessible by experiments. As a result of missing experimental capabilities to probe the complex electron dynamics and competing instabilities, this impedes the development of compact laser-based next generation secondary radiation sources, e.g. for tumor therapy [Bulanov2002,ledingham2007], laboratory-astrophysics [Remington1999,Bulanov2015], and fusion [Tabak2014]. At present, the fundamental plasma dynamics that occur at the nanometer and femtosecond scales during the laser-solid interaction can only be elucidated by simulations. Here we show experimentally that small angle X-ray scattering of femtosecond X-ray free-electron laser pulses facilitates new capabilities for direct in-situ characterization of intense short-pulse laser plasma interaction at solid density that allows simultaneous nanometer spatial and femtosecond temporal resolution, directly verifying numerical simulations of the electron density dynamics during the short pulse high intensity laser irradiation of a solid density target. For laser-driven grating targets, we measure the solid density plasma expansion and observe the generation of a transient grating structure in front of the pre-inscribed grating, due to plasma expansion, which is an hitherto unknown effect. We expect that our results will pave the way for novel time-resolved studies, guiding the development of future laser-driven particle and photon sources from solid targets.

physics.plasm-ph↗