arXiv subjects

Alexander Pilz

Publications and source records attributed to Alexander Pilz.

31 records · Page 2Linked to original sources

arXiv2017

Induced Ramsey-type results and binary predicates for point sets

Let $k$ and $p$ be positive integers and let $Q$ be a finite point set in general position in the plane. We say that $Q$ is $(k,p)$-Ramsey if there is a finite point set $P$ such that for every $k$-coloring $c$ of $\binom{P}{p}$ there is a subset $Q'$ of $P$ such that $Q'$ and $Q$ have the same order type and $\binom{Q'}{p}$ is monochromatic in $c$. Nešetřil and Valtr proved that for every $k \in \mathbb{N}$, all point sets are $(k,1)$-Ramsey. They also proved that for every $k \ge 2$ and $p \ge 2$, there are point sets that are not $(k,p)$-Ramsey. As our main result, we introduce a new family of $(k,2)$-Ramsey point sets, extending a result of Nešetřil and Valtr. We then use this new result to show that for every $k$ there is a point set $P$ such that no function $Γ$ that maps ordered pairs of distinct points from $P$ to a set of size $k$ can satisfy the following "local consistency" property: if $Γ$ attains the same values on two ordered triples of points from $P$, then these triples have the same orientation. Intuitively, this implies that there cannot be such a function that is defined locally and determines the orientation of point triples.

math.CO↗

arXiv2017

Geodesic Order Types

The geodesic between two points $a$ and $b$ in the interior of a simple polygon~$P$ is the shortest polygonal path inside $P$ that connects $a$ to $b$. It is thus the natural generalization of straight line segments on unconstrained point sets to polygonal environments. In this paper we use this extension to generalize the concept of the order type of a set of points in the Euclidean plane to geodesic order types. In particular, we show that, for any set $S$ of points and an ordered subset $\mathcal{B} \subseteq S$ of at least four points, one can always construct a polygon $P$ such that the points of $\mathcal{B}$ define the geodesic hull of~$S$ w.r.t.~$P$, in the specified order. Moreover, we show that an abstract order type derived from the dual of the Pappus arrangement can be realized as a geodesic order type.

cs.CG↗

arXiv2017

Packing Plane Spanning Trees and Paths in Complete Geometric Graphs

We consider the following question: How many edge-disjoint plane spanning trees are contained in a complete geometric graph $GK_n$ on any set $S$ of $n$ points in general position in the plane? We show that this number is in $Ω(\sqrt{n})$. Further, we consider variants of this problem by bounding the diameter and the degree of the trees (in particular considering spanning paths).

cs.CG↗

arXiv2016

An Optimal Algorithm for Reconstructing Point Set Order Types from Radial Orderings

Let $P$ be a set of $n$ labeled points in the plane. The radial system of $P$ describes, for each $p\in P$, the order in which a ray that rotates around $p$ encounters the points in $P \setminus \{p\}$. This notion is related to the order type of $P$, which describes the orientation (clockwise or counterclockwise) of every ordered triple in $P$. Given only the order type, the radial system is uniquely determined and can easily be obtained. The converse, however, is not true. Indeed, let $R$ be the radial system of $P$, and let $T(R)$ be the set of all order types with radial system $R$ (we define $T(R) = \emptyset$ for the case that $R$ is not a valid radial system). Aichholzer et al. (Reconstructing Point Set Order Types from Radial Orderings, in ISAAC 2014) show that $T(R)$ may contain up to $n-1$ order types. They also provide polynomial-time algorithms to compute $T(R)$ when only $R$ is given. We describe a new algorithm for finding $T(R)$. The algorithm constructs the convex hulls of all possible point sets with the radial system $R$. After that, orientation queries on point triples can be answered in constant time. A representation of this set of convex hulls can be found in $O(n)$ queries to the radial system, using $O(n)$ additional processing time. This is optimal. Our results also generalize to abstract order types.

cs.CG↗

arXiv2015

The Dual Diameter of Triangulations

Let $\Poly$ be a simple polygon with $n$ vertices. The \emph{dual graph} $\triang^*$ of a triangulation~$\triang$ of~$\Poly$ is the graph whose vertices correspond to the bounded faces of $\triang$ and whose edges connect those faces of~$\triang$ that share an edge. We consider triangulations of~$\Poly$ that minimize or maximize the diameter of their dual graph. We show that both triangulations can be constructed in $O(n^3\log n)$ time using dynamic programming. If $\Poly$ is convex, we show that any minimizing triangulation has dual diameter exactly $2\cdot\lceil\log_2(n/3)\rceil$ or $2\cdot\lceil\log_2(n/3)\rceil -1$, depending on~$n$. Trivially, in this case any maximizing triangulation has dual diameter $n-2$. Furthermore, we investigate the relationship between the dual diameter and the number of \emph{ears} (triangles with exactly two edges incident to the boundary of $\Poly$) in a triangulation. For convex $\Poly$, we show that there is always a triangulation that simultaneously minimizes the dual diameter and maximizes the number of ears. In contrast, we give examples of general simple polygons where every triangulation that maximizes the number of ears has dual diameter that is quadratic in the minimum possible value. We also consider the case of point sets in general position in the plane. We show that for any such set of $n$ points there are triangulations with dual diameter in~$O(\log n)$ and in~$Ω(\sqrt n)$.

cs.CG↗

arXiv2015

Flip Distance Between Triangulations of a Planar Point Set is APX-Hard

In this work we consider triangulations of point sets in the Euclidean plane, i.e., maximal straight-line crossing-free graphs on a finite set of points. Given a triangulation of a point set, an edge flip is the operation of removing one edge and adding another one, such that the resulting graph is again a triangulation. Flips are a major way of locally transforming triangular meshes. We show that, given a point set $S$ in the Euclidean plane and two triangulations $T_1$ and $T_2$ of $S$, it is an APX-hard problem to minimize the number of edge flips to transform $T_1$ to $T_2$.

cs.CG↗

arXiv2015

Ham-Sandwich Cuts for Abstract Order Types

The linear-time ham-sandwich cut algorithm of Lo, Matoušek, and Steiger for bi-chromatic finite point sets in the plane works by appropriately selecting crossings of the lines in the dual line arrangement with a set of well-chosen vertical lines. We consider the setting where we are not given the coordinates of the point set, but only the orientation of each point triple (the order type) and give a deterministic linear-time algorithm for the mentioned sub-algorithm. This yields a linear-time ham-sandwich cut algorithm even in our restricted setting. We also show that our methods are applicable to abstract order types.

cs.CG↗

arXiv2014

Flips in combinatorial pointed pseudo-triangulations with face degree at most four

In this paper we consider the flip operation for combinatorial pointed pseudo-triangulations where faces have size 3 or 4, so-called combinatorial 4-PPTs. We show that every combinatorial 4-PPT is stretchable to a geometric pseudo-triangulation, which in general is not the case if faces may have size larger than 4. Moreover, we prove that the flip graph of combinatorial 4-PPTs is connected and has diameter $O(n^2)$, even in the case of labeled vertices with fixed outer face. For this case we provide an $Ω(n\log n)$ lower bound.

math.CO↗

arXiv2014

New results on stabbing segments with a polygon

We consider a natural variation of the concept of stabbing a segment by a simple polygon: a segment is stabbed by a simple polygon $\mathcal{P}$ if at least one of its two endpoints is contained in $\mathcal{P}$. A segment set $S$ is stabbed by $\mathcal{P}$ if every segment of $S$ is stabbed by $\mathcal{P}$. We show that if $S$ is a set of pairwise disjoint segments, the problem of computing the minimum perimeter polygon stabbing $S$ can be solved in polynomial time. We also prove that for general segments the problem is NP-hard. Further, an adaptation of our polynomial-time algorithm solves an open problem posed by Löffler and van Kreveld [Algorithmica 56(2), 236--269 (2010)] about finding a maximum perimeter convex hull for a set of imprecise points modeled as line segments.

cs.CC↗

arXiv2014

Monotone Simultaneous Embedding of Directed Paths

We study monotone simultaneous embeddings of upward planar digraphs, which are simultaneous embeddings where the drawing of each digraph is upward planar, and the directions of the upwardness of different graphs can differ. We first consider the special case where each digraph is a directed path. In contrast to the known result that any two directed paths admit a monotone simultaneous embedding, there exist examples of three paths that do not admit such an embedding for any possible choice of directions of monotonicity. We prove that if a monotone simultaneous embedding of three paths exists then it also exists for any possible choice of directions of monotonicity. We provide a polynomial-time algorithm that, given three paths, decides whether a monotone simultaneous embedding exists and, in the case of existence, also constructs such an embedding. On the other hand, we show that already for three paths, any monotone simultaneous embedding might need a grid of exponential (w.r.t. the number of vertices) size. For more than three paths, we present a polynomial-time algorithm that, given any number of paths and predefined directions of monotonicity, decides whether the paths admit a monotone simultaneous embedding with respect to the given directions, including the construction of a solution if it exists. Further, we show several implications of our results on monotone simultaneous embeddings of general upward planar digraphs. Finally, we discuss complexity issues related to our problems.

cs.CG↗

arXiv2013

Linear transformation distance for bichromatic matchings

Let $P=B\cup R$ be a set of $2n$ points in general position, where $B$ is a set of $n$ blue points and $R$ a set of $n$ red points. A \emph{$BR$-matching} is a plane geometric perfect matching on $P$ such that each edge has one red endpoint and one blue endpoint. Two $BR$-matchings are compatible if their union is also plane. The \emph{transformation graph of $BR$-matchings} contains one node for each $BR$-matching and an edge joining two such nodes if and only if the corresponding two $BR$-matchings are compatible. In SoCG 2013 it has been shown by Aloupis, Barba, Langerman, and Souvaine that this transformation graph is always connected, but its diameter remained an open question. In this paper we provide an alternative proof for the connectivity of the transformation graph and prove an upper bound of $2n$ for its diameter, which is asymptotically tight.

cs.CG↗

arXiv2013

Geodesic-Preserving Polygon Simplification

Polygons are a paramount data structure in computational geometry. While the complexity of many algorithms on simple polygons or polygons with holes depends on the size of the input polygon, the intrinsic complexity of the problems these algorithms solve is often related to the reflex vertices of the polygon. In this paper, we give an easy-to-describe linear-time method to replace an input polygon $\mathcal{P}$ by a polygon $\mathcal{P}'$ such that (1) $\mathcal{P}'$ contains $\mathcal{P}$, (2) $\mathcal{P}'$ has its reflex vertices at the same positions as $\mathcal{P}$, and (3) the number of vertices of $\mathcal{P}'$ is linear in the number of reflex vertices. Since the solutions of numerous problems on polygons (including shortest paths, geodesic hulls, separating point sets, and Voronoi diagrams) are equivalent for both $\mathcal{P}$ and $\mathcal{P}'$, our algorithm can be used as a preprocessing step for several algorithms and makes their running time dependent on the number of reflex vertices rather than on the size of $\mathcal{P}$.

cs.CG↗

arXiv2013

Empty triangles in good drawings of the complete graph

A good drawing of a simple graph is a drawing on the sphere or, equivalently, in the plane in which vertices are drawn as distinct points, edges are drawn as Jordan arcs connecting their end vertices, and any pair of edges intersects at most once. In any good drawing, the edges of three pairwise connected vertices form a Jordan curve which we call a triangle. We say that a triangle is empty if one of the two connected components it induces does not contain any of the remaining vertices of the drawing of the graph. We show that the number of empty triangles in any good drawing of the complete graph $K_n$ with $n$ vertices is at least $n$.

cs.CG↗