arXiv subjects

Alexander Venus

Publications and source records attributed to Alexander Venus.

16 recordsLinked to original sources

arXiv2026

AI-enhanced Direct SLAM: A Principled Approach to Unsupervised Learning in Bayesian Inference

In this paper, we propose an artificial intelligence (AI)-enhanced hybrid simultaneous localization and mapping (SLAM) method that performs Bayesian inference directly on raw radio-frequency (RF) signals while learning an environment model in an unsupervised manner. The approach combines a physically interpretable signal model for line-of-sight (LOS) components with an AI model that captures multipath component statistics. Building on this formulation, we develop a particle-based sumproduct algorithm (SPA) on a factor graph that jointly estimates the mobile terminal (MT) state, visibility, multipath parameters, and noise variances, and integrate it into a variational framework that maximizes the evidence lower bound (ELBO) to learn the neural network (NN) parametrization directly from measurements. We further present a highly efficient GPU-based implementation that enables parallel likelihood evaluation across particles and base stations (BSs). Simulation results in multipath environments demonstrate that the proposed method learns the generative, environment-dependent signal model in an unsupervised manner while accurately localizing the MT and effectively exploiting the learned map in obstructed-line-of-sight (OLOS) scenarios.

eess.SP↗

arXiv2025

Simultaneous Source Separation, Synchronization, Localization and Mapping for 6G Systems

Multipath-based simultaneous localization and mapping (MP-SLAM) is a promising approach for future 6G networks to jointly estimate the positions of transmitters and receivers together with the propagation environment. In cooperative MP-SLAM, information collected by multiple mobile-terminals (MTs) is fused to enhance accuracy and robustness. Existing methods, however, typically assume perfectly synchronized base stations (BSs) and orthogonal transmission sequences, rendering inter-BS interference at the MT negligible. In this work, we relax these assumptions and address simultaneous source separation, synchronization, and mapping. A relevant example arises in modern 5G systems, where BSs employ muting patterns to mitigate interference, yet localization performance still degrades. We propose a novel BS-dependent data association and synchronization bias model, integrated into a joint Bayesian framework and inferred via the sum-product algorithm on a factor graph. The impact of joint synchronization and source separation is analyzed under various system configurations. Compared with state-of-the-art cooperative MP-SLAM assuming orthogonal and synchronized BSs, our statistical analysis shows no significant performance degradation. The proposed BS-dependent data association model constitutes a principled approach for classifying features by arbitrary properties that persist over time, such as reflection order or feature type (scatter points versus walls).

eess.SP↗

arXiv2025

Multi-Sensor Fusion for Extended Object Tracking Exploiting Active and Passive Radio Signals

Reliable and robust positioning of radio devices remains a challenging task due to multipath propagation, hardware impairments, and interference from other radio transmitters. A frequently overlooked but critical factor is the agent itself, e.g., the user carrying the device, which potentially obstructs line-of-sight (LOS) links to the base stations (anchors). This paper addresses the problem of accurate positioning in scenarios where LOS links are partially blocked by the agent. The agent is modeled as an extended object (EO) that scatters, attenuates, and blocks radio signals. We propose a Bayesian method that fuses ``active'' measurements (between device and anchors) with ``passive'' multistatic radar-type measurements (between anchors, reflected by the EO). To handle measurement origin uncertainty, we introduce an multi-sensor and multiple-measurement probabilistic data association (PDA) algorithm that jointly fuses all EO-related measurements. Furthermore, we develop an EO model tailored to agents such as human users, accounting for multiple reflections scattered off the body surface, and propose a simplified variant for low-complexity implementation. Evaluation on both synthetic and real radio measurements demonstrates that the proposed algorithm outperforms conventional PDA methods based on point target assumptions, particularly during and after obstructed line-of-sight (OLOS) conditions.

eess.SP↗

arXiv2025

Multi-Sensor Fusion of Active and Passive Measurements for Extended Object Tracking

This paper addresses the challenge of achieving robust and reliable positioning of a radio device carried by an agent, in scenarios where direct line-of-sight (LOS) radio links are obstructed by the agent. We propose a Bayesian estimation algorithm that integrates active measurements between the radio device and anchors with passive measurements in-between anchors reflecting off the agent. A geometry-based scattering measurement model is introduced for multi-sensor structures, and multiple object-related measurements are incorporated to formulate an extended object probabilistic data association (PDA) algorithm, where the agent that blocks, scatters and attenuates radio signals is modeled as an extended object (EO). The proposed approach significantly improves the accuracy during and after obstructed LOS conditions, outperforming the conventional PDA (which is based on the point-target-assumption) and methods relying solely on active measurements.

eess.SP↗

arXiv2025

A Sigma Point-based Low Complexity Algorithm for Multipath-based SLAM in MIMO Systems

Multipath-based simultaneous localization and mapping (MP-SLAM) is a promising approach in wireless networks to jointly obtain position information of transmitters/receivers and information of the propagation environment. MP-SLAM models specular reflections at flat surfaces as virtual anchors (VAs), which are mirror images of base stations. Particle-based methods offer high flexibility and can approximate posterior probability density functions of the mobile agent state and the map feature states, (i.e., VA states) with complex shapes. However, they often require a large number of particles to counteract degeneracy in high-dimensional parameter spaces, leading to high computational complexity. Conversely using an insufficient number of particles leads to reduced estimation accuracy. In this paper, we introduce a low-complexity MP-SLAM algorithm using a sigma point (SP)-based implementation of the sum-product algorithm (SPA). We model the messages of continuous states of the agent and the VAs as Gaussian distributions and approximate nonlinearities via SP-transformations. This approach substantially reduces the computational complexity without decreasing accuracy. Since probabilistic data association yields Gaussian mixtures for the agent and VA states, we use moment matching to combine each mixture into a single Gaussian. Numerical results using synthetic and real data demonstrate that our method achieves significantly reduced computational runtimes compared to particle-based schemes, while exhibiting comparable (or even superior) localization and mapping performance.

eess.SP↗

arXiv2025

A Block-Sparse Bayesian Learning Algorithm with Dictionary Parameter Estimation for Multi-Sensor Data Fusion

We propose an sparse Bayesian learning (SBL)-based method that leverages group sparsity and multiple parameterized dictionaries to detect the relevant dictionary entries and estimate their continuous parameters by combining data from multiple independent sensors. In a MIMO multi-radar setup, we demonstrate its effectiveness in jointly detecting and localizing multiple objects, while also emphasizing its broader applicability to various signal processing tasks. A key benefit of the proposed SBL-based method is its ability to resolve correlated dictionary entries-such as closely spaced objects-resulting in uncorrelated estimates that improve subsequent estimation stages. Through numerical simulations, we show that our method outperforms the newtonized orthogonal matching pursuit (NOMP) algorithm when two objects cross paths using a single radar. Furthermore, we illustrate how fusing measurements from multiple independent radars leads to enhanced detection and localization performance.

eess.SP↗

arXiv2024

Multipath-based SLAM with Cooperation and Map Fusion in MIMO Systems

Multipath-based simultaneous localization and mapping (MP-SLAM) is a promising approach in wireless networks for obtaining position information of transmitters and receivers as well as information on the propagation environment. MP-SLAM models specular reflections of radio frequency (RF) signals at flat surfaces as virtual anchors (VAs), the mirror images of base stations (BSs). Conventional methods for MP-SLAM consider a single mobile terminal (MT) which has to be localized. The availability of additional MTs paves the way for utilizing additional information in the scenario. Specifically enabling MTs to exchange information allows for data fusion over different observations of VAs made by different MTs. Furthermore, cooperative localization becomes possible in addition to multipathbased localization. Utilizing this additional information enables more robust mapping and higher localization accuracy.

eess.SP↗

arXiv2024

MIMO Multipath-based SLAM for Non-Ideal Reflective Surfaces

Multipath-based simultaneous localization and mapping (MP-SLAM) is a well established approach to obtain position information of transmitters and receivers as well as information regarding the propagation environments in future multiple input multiple output (MIMO) communication systems. Conventional methods for MP-SLAM consider specular reflections of the radio signals occurring at smooth, flat surfaces, which are modeled by virtual anchors (VAs) that are mirror images of the physical anchors (PAs), with each VA generating a single multipath component (MPC). However, non-ideal reflective surfaces (such as walls covered by shelves or cupboards) cause dispersion effects that violate the VA model and lead to multiple MPCs that are associated to a single VA. In this paper, we introduce a Bayesian particle-based sum-product algorithm (SPA) for MP-SLAM in MIMO communications systems. Our method considers non-ideal reflective surfaces by jointly estimating the parameters of individual dispersion models for each detected surface in delay and angle domain leveraging multiple-measurement-to-feature data association. We demonstrate that the proposed SLAM method can robustly and jointly estimate the positions and dispersion extents of ideal and non-ideal reflective surfaces using numerical simulation.

eess.SP↗

arXiv2024

Fusion of Active and Passive Measurements for Robust and Scalable Positioning

This paper addresses the challenge of achieving reliable and robust positioning of a mobile agent, such as a radio device carried by a person, in scenarios where direct line-of-sight (LOS) links are obstructed or unavailable. The human body is considered as an extended object that scatters, attenuates and blocks the radio signals. We propose a novel particle-based sum-product algorithm (SPA) that fuses active measurements between the agent and anchors with passive measurements from pairs of anchors reflected off the body. We first formulate radio signal models for both active and passive measurements. Then, a joint tracking algorithm that utilizes both active and passive measurements is developed for the extended object. The algorithm exploits the probabilistic data association (PDA) for multiple object-related measurements. The results demonstrate superior accuracy during and after the obstructed line-of-sight (OLOS) situation, outperforming conventional methods that solely rely on active measurements. The proposed joint estimation approach significantly enhances the localization robustness via radio sensing.

eess.SP↗

arXiv2023

Graph-based Simultaneous Localization and Bias Tracking

We present a factor graph formulation and particle-based sum-product algorithm for robust localization and tracking in multipath-prone environments. The proposed sequential algorithm jointly estimates the mobile agent's position together with a time-varying number of multipath components (MPCs). The MPCs are represented by "delay biases" corresponding to the offset between line-of-sight (LOS) component delay and the respective delays of all detectable MPCs. The delay biases of the MPCs capture the geometric features of the propagation environment with respect to the mobile agent. Therefore, they can provide position-related information contained in the MPCs without explicitly building a map of the environment. We demonstrate that the position-related information enables the algorithm to provide high-accuracy position estimates even in fully obstructed line-of-sight (OLOS) situations. Using simulated and real measurements in different scenarios we demonstrate that the proposed algorithm significantly outperforms state-of-the-art multipath-aided tracking algorithms and show that the performance of our algorithm constantly attains the posterior Cramer-Rao lower bound (P-CRLB). Furthermore, we demonstrate the implicit capability of the proposed method to identify unreliable measurements and, thus, to mitigate lost tracks.

eess.SP↗

arXiv2023

A Neural-enhanced Factor Graph-based Algorithm for Robust Positioning in Obstructed LOS Situations

This paper presents a neural-enhanced probabilistic model and corresponding factor graph-based sum-product algorithm for robust localization and tracking in multipath-prone environments. The introduced hybrid probabilistic model consists of physics-based and data-driven measurement models capturing the information contained in both, the line-of-sight (LOS) component as well as in multipath components (NLOS components). The physics-based and data-driven models are embedded in a joint Bayesian framework allowing to derive from first principles a factor graph-based algorithm that fuses the information of these models. The proposed algorithm uses radio signal measurements from multiple base stations to robustly estimate the mobile agent's position together with all model parameters. It provides high localization accuracy by exploiting the position-related information of the LOS component via the physics-based model and robustness by exploiting the geometric imprint of multipath components independent of the propagation channel via the data-driven model. In a challenging numerical experiment involving obstructed LOS situations to all anchors, we show that the proposed sequential algorithm significantly outperforms state-of-the-art methods and attains the posterior Cramer-Rao lower bound even with training data limited to local regions.

eess.SP↗

arXiv2023

Multipath-based SLAM for Non-Ideal Reflective Surfaces Exploiting Multiple-Measurement Data Association

Multipath-based simultaneous localization and mapping (SLAM) is a promising approach to obtain position information of transmitters and receivers as well as information regarding the propagation environments in future mobile communication systems. Usually, specular reflections of the radio signals occurring at flat surfaces are modeled by virtual anchors (VAs) that are mirror images of the physical anchors (PAs). In existing methods for multipath-based SLAM, each VA is assumed to generate only a single measurement. However, due to imperfections of the measurement equipment such as non-calibrated antennas or model mismatch due to roughness of the reflective surfaces, there are potentially multiple multipath components (MPCs) that are associated to one single VA. In this paper, we introduce a Bayesian particle-based sum-product algorithm (SPA) for multipath-based SLAM that can cope with multiple-measurements being associated to a single VA. Furthermore, we introduce a novel statistical measurement model that is strongly related to the radio signal. It introduces additional dispersion parameters into the likelihood function to capture additional MPCs-related measurements. We demonstrate that the proposed SLAM method can robustly fuse multiple measurements per VA based on numerical simulations.

eess.SP↗

arXiv2022

Data Fusion for Multipath-Based SLAM: Combining Information from Multiple Propagation Paths

Multipath-based simultaneous localization and mapping (SLAM) is an emerging paradigm for accurate indoor localization with limited resources. The goal of multipath-based SLAM is to detect and localize radio reflective surfaces to support the estimation of time-varying positions of mobile agents. Radio reflective surfaces are typically represented by so-called virtual anchors (VAs), which are mirror images of base stations at the actual surfaces. In existing multipath-based SLAM methods, a VA is introduced for each propagation path, even if the goal is to map the reflective surfaces. The fact that not every reflective surface but every propagation path is modeled by a VA, complicates a consistent combination "fusion" of statistical information across multiple paths and base stations and thus limits the accuracy and mapping speed of existing multipath-based SLAM methods. In this paper, we introduce an improved statistical model and estimation method that enables data fusion for multipath-based SLAM by representing each surface by a single master virtual anchor (MVA). We further develop a particle-based sum-product algorithm (SPA) that performs probabilistic data association to compute marginal posterior distributions of MVA and agent positions efficiently. A key aspect of the proposed estimation method based on MVAs is to check the availability of singlebounce and double-bounce propagation paths at a specific agent position by means of ray-launching. The availability check is directly integrated into the statistical model by providing detection probabilities for probabilistic data association. Numerical results based on simulated and real data demonstrate significant improvements in estimation accuracy compared to state-of-theart multipath-based SLAM methods.

eess.SP↗

arXiv2022

A Graph-based Algorithm for Robust Sequential Localization Exploiting Multipath for Obstructed-LOS-Bias Mitigation

This paper presents a factor graph formulation and particle-based sum-product algorithm (SPA) for robust sequential localization in multipath-prone environments. The proposed algorithm jointly performs data association, sequential estimation of a mobile agent position, and adapts all relevant model parameters. We derive a novel non-uniform false alarm (FA) model that captures the delay and amplitude statistics of the multipath radio channel. This model enables the algorithm to indirectly exploit position-related information contained in the multipath components (MPCs) for the estimation of the agent position without using any prior information such as floorplan information or training data. Using simulated and real measurements in different channel conditions, we demonstrate that the algorithm can provide high-accuracy position estimates even in fully obstructed line-of-sight (OLOS) situations and show that the performance of our algorithm constantly attains the posterior Cramer-Rao lower bound (P-CRLB), facilitating the additional information contained in the presented FA model. The algorithm is shown to provide robust estimates in both, dense multipath channels as well as channels showing specular, resolved MPCs, significantly outperforming state-of-the-art radio-based localization methods.

eess.SP↗

arXiv2021

Sequential Detection and Estimation of Multipath Channel Parameters Using Belief Propagation

This paper proposes a belief propagation (BP)-based algorithm for sequential detection and estimation of multipath component (MPC) parameters based on radio signals. Under dynamic channel conditions with moving transmitter/receiver, the number of MPCs, the MPC dispersion parameters, and the number of false alarm contributions are unknown and time-varying. We develop a Bayesian model for sequential detection and estimation of MPC dispersion parameters, and represent it by a factor graph enabling the use of BP for efficient computation of the marginal posterior distributions. At each time step, a snapshot-based parametric channel estimator provides parameter estimates of a set of MPCs which are used as noisy measurements by the proposed BP-based algorithm. It performs joint probabilistic data association, and estimation of the time-varying MPC parameters and the mean number of false alarm measurements, by means of the sum-product algorithm rules. The algorithm also exploits amplitude information enabling the reliable detection of "weak" MPCs with very low component signal-to-noise ratios (SNRs). The performance of the proposed algorithm compares well to state-of-the-art algorithms for high SNR MPCs, but it significantly outperforms them for medium or low SNR MPCs. Results using real radio measurements demonstrate the excellent performance of the proposed algorithm in realistic and challenging scenarios.

cs.IT↗

arXiv2021

A Message Passing based Adaptive PDA Algorithm for Robust Radio-based Localization and Tracking

We present a message passing algorithm for localization and tracking in multipath-prone environments that implicitly considers obstructed line-of-sight situations. The proposed adaptive probabilistic data association algorithm infers the position of a mobile agent using multiple anchors by utilizing delay and amplitude of the multipath components (MPCs) as well as their respective uncertainties. By employing a nonuniform clutter model, we enable the algorithm to facilitate the position information contained in the MPCs to support the estimation of the agent position without exact knowledge about the environment geometry. Our algorithm adapts in an online manner to both, the time-varying signal-to-noise-ratio and line-of-sight (LOS) existence probability of each anchor. In a numerical analysis we show that the algorithm is able to operate reliably in environments characterized by strong multipath propagation, even if a temporary obstruction of all anchors occurs simultaneously.

cs.IT↗