SearcharxivSearch

arXiv subjects

Alexander Yarovoy

Publications and source records attributed to Alexander Yarovoy.

17 recordsLinked to original sources

Redefining Radar Segmentation: Simultaneous Static-Moving Segmentation and Ego-Motion Estimation using Radar Point Clouds

Conventional radar segmentation research has typically focused on learning category labels for different moving objects. Although fundamental differences between radar and optical sensors lead to differences in the reliability of predicting accurate and consistent category labels, a review of common radar perception tasks in automotive reveals that determining whether an object is moving or static is a prerequisite for most tasks. To fill this gap, this study proposes a neural network based solution that can simultaneously segment static and moving objects from radar point clouds. Furthermore, since the measured radial velocity of static objects is correlated with the motion of the radar, this approach can also estimate the instantaneous 2D velocity of the moving platform or vehicle (ego motion). However, despite performing dual tasks, the proposed method employs very simple yet effective building blocks for feature extraction: multi layer perceptrons (MLPs) and recurrent neural networks (RNNs). In addition to being the first of its kind in the literature, the proposed method also demonstrates the feasibility of extracting the information required for the dual task directly from unprocessed point clouds, without the need for cloud aggregation, Doppler compensation, motion compensation, or any other intermediate signal processing steps. To measure its performance, this study introduces a set of novel evaluation metrics and tests the proposed method using a challenging real world radar dataset, RadarScenes. The results show that the proposed method not only performs well on the dual tasks, but also has broad application potential in other radar perception tasks.

eess.SP

Robust Radar Mounting Angle Estimation in Operational Driving Conditions

The robust estimation of the mounting angle for millimeter-wave automotive radars installed on moving vehicles is investigated. We propose a novel signal processing pipeline that combines radar and inertial measurement unit (IMU) data to achieve accurate and reliable performance in realistic driving scenarios. Unlike previous studies, the method employs neural networks to process sparse and noisy radar measurements, reject detections from moving objects, and estimate radar motion. In addition, a measurement model is introduced to correct IMU bias and scale factor errors. Using vehicle kinematics, the radar mounting angle is then computed from the estimated radar motion and the vehicle's yaw rate. To benchmark performance, the proposed approach is comprehensively compared with two problem formulations and four estimation techniques reported in the literature. Validation is carried out on the challenging RadarScenes dataset, covering over 79 km of real-world driving. Results show that the proposed method achieves state-of-the-art accuracy and robustness, with reliable estimates obtained within approximately 25 seconds of driving. To the best of our knowledge, this is the first study to demonstrate that automotive radar mounting angles can be accurately estimated in complex, real traffic conditions, without requiring controlled environments, dedicated targets, or specially designed driving routes.

eess.SP

Grouped Target Tracking and Seamless People Counting with a 24 GHz MIMO FMCW

The problem of radar-based tracking of groups of people moving together and counting their numbers in indoor environments is considered here. A novel processing pipeline to track groups of people moving together and count their numbers is proposed and validated. The pipeline is specifically designed to deal with frequent changes of direction and stop & go movements typical of indoor activities. The proposed approach combines a tracker with a classifier to count the number of grouped people; this uses both spatial features extracted from range-azimuth maps, and Doppler frequency features extracted with wavelet decomposition. Thus, the pipeline outputs over time both the location and number of people present. The proposed approach is verified with experimental data collected with a 24 GHz Frequency Modulated Continuous Wave (FMCW) radar. It is shown that the proposed method achieves 95.59% accuracy in counting the number of people, and a tracking metric OSPA of 0.338. Furthermore, the performance is analyzed as a function of different relevant variables such as feature combinations and scenarios.

eess.SP

CDMA and Non-Uniform Multiplexing: Dynamic Range in MIMO Radar Waveforms

This paper presents a performance comparison of various MIMO radar multiplexing approaches where the increasing number of transmitters adversely affects the dynamic range of the resultant MIMO system. The investigated multiplexing techniques are code-division multiplexing in phase-coded frequency-modulated continuous wave (FMCW) and phase-modulated continuous wave (PMCW) radar. Additionally, random fast/slow time multiplexing in time and frequency is considered for frequency-modulated continuous wave and orthogonal frequency-division multiplexing (OFDM) radars. The comparative analysis is conducted through simulations, evaluating the scalability with the number of transmitters and addressing other pertinent implementation concerns. The findings provide insights into the trade-offs associated with each approach, aiding in selecting suitable MIMO radar multiplexing strategies for practical applications.

eess.SP

A Deep Automotive Radar Detector using the RaDelft Dataset

The detection of multiple extended targets in complex environments using high-resolution automotive radar is considered. A data-driven approach is proposed where unlabeled synchronized lidar data is used as ground truth to train a neural network with only radar data as input. To this end, the novel, large-scale, real-life, and multi-sensor RaDelft dataset has been recorded using a demonstrator vehicle in different locations in the city of Delft. The dataset, as well as the documentation and example code, is publicly available for those researchers in the field of automotive radar or machine perception. The proposed data-driven detector is able to generate lidar-like point clouds using only radar data from a high-resolution system, which preserves the shape and size of extended targets. The results are compared against conventional CFAR detectors as well as variations of the method to emulate the available approaches in the literature, using the probability of detection, the probability of false alarm, and the Chamfer distance as performance metrics. Moreover, an ablation study was carried out to assess the impact of Doppler and temporal information on detection performance. The proposed method outperforms the different baselines in terms of Chamfer distance, achieving a reduction of 75% against conventional CFAR detectors and 10% against the modified state-of-the-art deep learning-based approaches.

eess.SP

Analysis of Processing Pipelines for Indoor Human Tracking using FMCW radar

In this paper, the problem of formulating effective processing pipelines for indoor human tracking is investigated, with the usage of a Multiple Input Multiple Output (MIMO) Frequency Modulated Continuous Wave (FMCW) radar. Specifically, two processing pipelines starting with detections on the Range-Azimuth (RA) maps and the Range-Doppler (RD) maps are formulated and compared, together with subsequent clustering and tracking algorithms and their relevant parameters. Experimental results are presented to validate and assess both pipelines, using a 24 GHz commercial radar platform with 250 MHz bandwidth and 15 virtual channels. Scenarios where 1 and 2 people move in an indoor environment are considered, and the influence of the number of virtual channels and detectors' parameters is discussed. The characteristics and limitations of both pipelines are presented, with the approach based on detections on RA maps showing in general more robust results.

eess.SP

See Further Than CFAR: a Data-Driven Radar Detector Trained by Lidar

In this paper, we address the limitations of traditional constant false alarm rate (CFAR) target detectors in automotive radars, particularly in complex urban environments with multiple objects that appear as extended targets. We propose a data-driven radar target detector exploiting a highly efficient 2D CNN backbone inspired by the computer vision domain. Our approach is distinguished by a unique cross sensor supervision pipeline, enabling it to learn exclusively from unlabeled synchronized radar and lidar data, thus eliminating the need for costly manual object annotations. Using a novel large-scale, real-life multi-sensor dataset recorded in various driving scenarios, we demonstrate that the proposed detector generates dense, lidar-like point clouds, achieving a lower Chamfer distance to the reference lidar point clouds than CFAR detectors. Overall, it significantly outperforms CFAR baselines detection accuracy.

eess.SP

3D high-resolution imaging algorithm using 1D MIMO array for autonomous driving application

The problem of 3D high-resolution imaging in automotive multiple-input multiple-output (MIMO) side-looking radar using a 1D array is considered. The concept of motion-enhanced snapshots is introduced for generating larger apertures in the azimuth dimension. For the first time, 3D imaging capabilities can be achieved with high angular resolution using a 1D MIMO antenna array, which can alleviate the requirement for large radar systems in autonomous vehicles. The robustness to variations in the vehicle's movement trajectory is also considered and addressed with relevant compensations in the steering vector. The available degrees of freedom as well as the Signal to Noise Ratio (SNR) are shown to increase with the proposed method compared to conventional imaging approaches. The performance of the algorithm has been studied in simulations, and validated with experimental data collected in a realistic driving scenario.

eess.SP

Self-Supervised Learning for Enhancing Angular Resolution in Automotive MIMO Radars

A novel framework to enhance the angular resolution of automotive radars is proposed. An approach to enlarge the antenna aperture using artificial neural networks is developed using a self-supervised learning scheme. Data from a high angular resolution radar, i.e., a radar with a large antenna aperture, is used to train a deep neural network to extrapolate the antenna element's response. Afterward, the trained network is used to enhance the angular resolution of compact, low-cost radars. One million scenarios are simulated in a Monte-Carlo fashion, varying the number of targets, their Radar Cross Section (RCS), and location to evaluate the method's performance. Finally, the method is tested in real automotive data collected outdoors with a commercial radar system. A significant increase in the ability to resolve targets is demonstrated, which can translate to more accurate and faster responses from the planning and decision making system of the vehicle.

eess.SP

Smoothed Phase-Coded FMCW: Waveform Properties and Transceiver Architecture

Smoothed phase-coded frequency modulated continuous waveform (SPC-FMCW), which is aimed to improve the coexistence of multiple radars operating within the same frequency bandwidth, is studied, and the receiving strategy with a low ADC sampling requirement is investigated. The Gaussian filter is applied to obtain smooth waveform phase transitions, and then quadratic phase lag compensation is performed before waveform transmission to enhance decoding. The proposed waveform is examined in different domains, and its waveform properties are analysed theoretically and demonstrated experimentally. Both simulation and experimental results show that the introduced waveform with the investigated processing steps helps combine all advantages of the FMCW waveform, including hardware simplicity and small operational bandwidth of the receiver, with the advantages of phase coding.

eess.SP

Generalized Matrix-Pencil Approach to Estimation of Complex Exponentials with Gapped Data

A generalized matrix-pencil approach is proposed for the estimation of complex exponential components with segmented signal samples, which is very efficient and provides super-resolution estimations. It is applicable to the signals sampled segmentally with the same sampling frequency and direction of arrival (DOA) estimation with distributed arrays within which array elements are placed uniformly with the same inter-element spacing.

eess.SP

Interference Mitigation for FMCW Radar With Sparse and Low-Rank Hankel Matrix Decomposition

In this paper, the interference mitigation for Frequency Modulated Continuous Wave (FMCW) radar system with a dechirping receiver is investigated. After dechirping operation, the scattered signals from targets result in beat signals, i.e., the sum of complex exponentials while the interferences lead to chirp-like short pulses. Taking advantage of these different time and frequency features between the useful signals and the interferences, the interference mitigation is formulated as an optimization problem: a sparse and low-rank decomposition of a Hankel matrix constructed by lifting the measurements. Then, an iterative optimization algorithm is proposed to tackle it by exploiting the Alternating Direction of Multipliers (ADMM) scheme. Compared to the existing methods, the proposed approach does not need to detect the interference and also improves the estimation accuracy of the separated useful signals. Both numerical simulations with point-like targets and experiment results with distributed targets (i.e., raindrops) are presented to demonstrate and verify its performance. The results show that the proposed approach is generally applicable for interference mitigation in both stationary and moving target scenarios.

eess.SP

Architectural considerations in the design of a third-generation superconducting quantum annealing processor

Early generations of superconducting quantum annealing processors have provided a valuable platform for studying the performance of a scalable quantum computing technology. These studies have directly informed our approach to the design of the next-generation processor. Our design priorities for this generation include an increase in per-qubit connectivity, a problem Hamiltonian energy scale similar to previous generations, reduced Hamiltonian specification errors, and an increase in the processor scale that also leaves programming and readout times fixed or reduced. Here we discuss the specific innovations that resulted in a processor architecture that satisfies these design priorities.

quant-ph

A Novel Approach to Vehicle Pose Estimation using Automotive Radar

This paper presents a set of novel scan-matching techniques for vehicle pose estimation using automotive radar measurements. The proposed approach modifies the Normal Distributions Transform (NDT) -- a state-of-the-art scan-matching SLAM technique, widely used in lidar-based localization -- to account for particular aspects of radar environment perception. First, the polar NDT (PNDT) is introduced by solving the NDT problem in the polar coordinate system, natural for radar measurements. A better agreement between the measurement uncertainties and their representation in the scan-matching algorithm is achieved. Second, the extension of PNDT to take into account the Doppler measurements -- Doppler polar NDT (DPNDT) -- is proposed. Third, the SNR of detected targets is added to the optimization procedure to minimize the impact of RCS fluctuation. The improvement over the conventional NDT is demonstrated in numerical simulations and real data processing, showing the ability to decrease the localization error by a factor of 3 to 5, depending on the scenario, with a negligible increase in computational complexity. Finally, a DPNDT extension with the capability to compensate angular bias in array beam-forming is presented. Simulation results and real data processing show the possibility to correct it with the accuracy of $0.1^\circ$ almost in real-time.

eess.SP

Matrix-Pencil Approach-Based Interference Mitigation for FMCW Radar Systems

A novel matrix pencil-based interference mitigation approach for FMCW radars is proposed in this paper. The interference-contaminated segment of the beat signal is firstly cut out and then the signal samples in the cut-out region are reconstructed by modeling the beat signal as a sum of complex exponentials and using the matrix pencil method to estimate their parameters. The efficiency of the proposed approach for the interference with different parameters (i.e. interference duration, signal-to-noise ratio (SNR), and different target scenarios) is investigated by means of numerical simulations. The proposed interference mitigation approach is intensively verified on experimental data. Comparisons of the proposed approach with the zeroing and other beat-frequency interpolation techniques are presented. The results indicate the broad applicability and superiority of the proposed approach, especially in low SNR and long interference duration situations.

eess.SP

Track selection in Multifunction Radars: Nash and correlated equilibria

We consider a track selection problem for multi-target tracking in a multifunction radar network from a game-theoretic perspective. The problem is formulated as a non-cooperative game. The radars are considered to be players in this game with utilities modeled using a proper tracking accuracy criterion and their strategies are the observed targets whose number is known. Initially, for the problem of coordination, the Nash equilibria are characterized and, in order to find equilibria points, a distributed algorithm based on the best-response dynamics is proposed. Afterwards, the analysis is extended to the case of partial target observability and radar connectivity and heterogeneous interests among radars. The solution concept of correlated equilibria is employed and a distributed algorithm based on the regret-matching is proposed. The proposed algorithms are shown to perform well compared to the centralized approach of significantly higher complexity.

cs.GT

Track selection in Multifunction Radars for Multi-target tracking: an Anti-Coordination game

In this paper, a track selection problem for multi-target tracking in a multifunction radar network is studied using the concepts from game theory. The problem is formulated as a non-cooperative game, and specifically as an anti-coordination game, where each player aims to differ from what other players do. The players' utilities are modeled using a proper tracking accuracy criterion and, under different assumptions on the structure of these utilities, the corresponding Nash equilibria are characterized. To find an equilibrium, a distributed algorithm based on the best-response dynamics is proposed. Finally, computer simulations are carried out to verify the effectiveness of the proposed algorithm in a multi-target tracking scenario.

cs.MA