arXiv subjects

Alexandra B. Artusio-Glimpse

Publications and source records attributed to Alexandra B. Artusio-Glimpse.

25 records · Page 2Linked to original sources

arXiv2022

Modeling Line Broadening and Distortion Due to Spatially Non-Uniform Fields in Rydberg Electrometry

We present a model for calculating broadened Autler-Townes spectra when probing ac electric field magnitudes by use of Rydberg atom electromagnetically-induced transparency. This model approximates the atom vapor as a multi-layered media and uses Beer's law to combine probe beam absorption through many discrete thin segments, replicating the broadening seen in experimental measurements. The methodology can be easily applied to other non-uniform optical parameters when monitoring total spectral transmission or phase delay. Field non-uniformity is present in standing waves of unmatched waveguides and glass vapor cells, which are generally due to source characteristics and environmental reflections. We present broadening and distortion effects caused by various types of electric-field distributions, and compare this model to results obtained from measured atomic spectra.

physics.atom-ph↗

arXiv2022

Rydberg atom-based field sensing enhancement using a split-ring resonator

We investigate the use of a split-ring resonator (SRR) incorporated with an atomic-vapor cell to improve the sensitivity and the minimal detectable electric (E) field of Rydberg atom-based sensors. In this approach, a sub-wavelength SRR is placed around an atomic vapor-cell filled with cesium atoms for E-field measurements at 1.3~GHz. The SRR provides a factor of 100 in the enhancement of the E-field measurement sensitivity. Using electromagnetically induced transparency (EIT) with Aulter-Townes splitting, E-field measurements down to 5~mV/m are demonstrated with the SRR, while in the absence of the SRR, the minimal detectable field is 500~mV/m. We demonstrate that by combining EIT with a heterodyne Rydberg atom-based mixer approach, the SRR allows for the a sensitivity of 5.5~$μ$V/m$\sqrt{\rm Hz}$, which is two-orders of magnitude improvement in sensitivity than when the SRR is not used.

physics.atom-ph↗

arXiv2021

Electromagnetically induced transparency based Rydberg-atom sensor for quantum voltage measurements

We investigate the Stark shift in Rydberg rubidium atoms through electromagnetically induced transparency for the measurement of direct current (dc) and 60~Hz alternating current (ac) voltages. This technique has direct applications to atom-based measurements of dc and ac voltage and the calibration of voltage instrumentation. We present experimental results for different atomic states that allow for dc and ac voltage measurements ranging from 0~V to 12~V. A Rydberg atom-based voltage standard could become an alternative calibration method with more favorable size, weight, power consumption, and cost compared to the more precise Josephson voltage standard. In this study, we also demonstrate how the voltage measurements can be utilized to determine the atomic polarizability for the Rydberg states. The Rydberg atom-based voltage measurement technology would become a complimentary method for dissemination of the voltage scale directly to the end user.

physics.atom-ph↗

arXiv2021

Enhancement of electromagnetically induced transparency based Rydberg-atom electrometry through population repumping

We demonstrate improved sensitivity of Rydberg electrometry based on electromagnetically induced transparency (EIT) with a ground state repumping laser. Though there are many factors that limit the sensitivity of radio frequency field measurements, we show that repumping can enhance the interaction strength while avoiding additional Doppler or power broadening. Through this method, we nearly double the EIT amplitude without an increase in the width of the peak. A similar increase in amplitude without the repumping field is not possible through simple optimization.We also establish that one of the key limits to detection is the photon shot noise of the probe laser. We show an improvement on the sensitivity of the device by a factor of nearly 2 in the presence of the repump field.

physics.atom-ph↗

arXiv2021

Continuous radio frequency electric-field detection through adjacent Rydberg resonance tuning

We demonstrate the use of multiple atomic-level Rydberg-atom schemes for continuous frequency detection of radio frequency (RF) fields. Resonant detection of RF fields by electromagnetically-induced transparency and Autler-Townes (AT) in Rydberg atoms is typically limited to frequencies within the narrow bandwidth of a Rydberg transition. By applying a second field resonant with an adjacent Rydberg transition, far-detuned fields can be detected through a two-photon resonance AT splitting. This two-photon AT splitting method is several orders of magnitude more sensitive than off-resonant detection using the Stark shift. We present the results of various experimental configurations and a theoretical analysis to illustrate the effectiveness of this multiple level scheme. These results show that this approach allows for the detection of frequencies in continuous band between resonances with adjacent Rydberg states.

physics.atom-ph↗

arXiv2021

High amplification laser-pressure optic enables ultra-low uncertainty measurements at kilowatts

We present the first measurements of kilowatt laser power with an uncertainty less than 1 %. These represent progress toward the most accurate measurements of laser power above 1 kW at 1070 nm wavelength and establish a more precise link between force metrology and laser power metrology. Radiation pressure, or photon momentum, is a relatively new method of non-destructively measuring laser power. We demonstrate how a multiple reflection optical system amplifies the pressure of a kilowatt class laser incoherently to improve the signal to noise ratio in a radiation pressure-based measurement. With 14 incoherent reflections of the laser, we measure a total uncertainty of 0.26 % for an input power of 10 kW and 0.46 % for an input power of 1 kW at the 95 % confidence level. These measurements of absolute power are traceable to the SI kilogram and mark a state-of-the-art improvement in measurement precision by a factor of four.

physics.optics↗

arXiv2018

Micromachined force scale for optical power measurement by radiation pressure sensing

We introduce a micromachined force scale for laser power measurement by means of radiation pressure sensing. With this technique, the measured laser light is not absorbed and can be utilized while being measured. We employ silicon micromachining technology to construct a miniature force scale, opening the potential to its use for fast in-line laser process monitoring. Here we describe the mechanical sensing principle and conversion to an electrical signal. We further outline an electrostatic force substitution process for nulling of the radiation pressure force on the sensor mirror. Finally, we look at the performance of a proof-of-concept device in open-loop operation (without the nulling electrostatic force) subjected to a modulated laser at 250 W and find its response time is less than 20 ms with noise floor dominated by electronics at 2.5 W/root(Hz).

physics.ins-det↗