arXiv subjects

Alexandre Aubry

Publications and source records attributed to Alexandre Aubry.

At least 37 records · Page 2Linked to original sources

arXiv2022

Ultrasound Matrix Imaging-Part I: The focused reflection matrix, the F-factor and the role of multiple scattering

This is the first article in a series of two dealing with a matrix approach for aberration quantification and correction in ultrasound imaging. Advanced synthetic beamforming relies on a double focusing operation at transmission and reception on each point of the medium. Ultrasound matrix imaging (UMI) consists in decoupling the location of these transmitted and received focal spots. The response between those virtual transducers form the so-called focused reflection matrix that actually contains much more information than a confocal ultrasound image. In this paper, a time-frequency analysis of this matrix is performed, which highlights the single and multiple scattering contributions as well as the impact of aberrations in the monochromatic and broadband regimes. Interestingly, this analysis enables the measurement of the incoherent input-output point spread function at any pixel of this image. A fitting process enables the quantification of the single scattering, multiple scattering and noise components in the image. From the single scattering contribution, a focusing criterion is defined, and its evolution used to quantify the amount of aberration throughout the ultrasound image. In contrast to the state-of-the-art coherence factor, this new indicator is robust to multiple scattering and electronic noise, thereby providing a contrasted map of the focusing quality at a much better transverse resolution. After a validation of the proof-of-concept based on time-domain simulations, UMI is applied to the in-vivo study of a human calf. Beyond this specific example, UMI opens a new route for speed-of-sound and scattering quantification in ultrasound imaging.

physics.app-ph↗

arXiv2022

Distribution of seismic scatterers in the San Jacinto Fault Zone, southeast of Anza, California, based on passive matrix imaging

Fault zones are associated with multi-scale heterogeneities of rock properties. Large scale variations may be imaged with conventional seismic reflection methods that detect offsets in geological units, and tomographic techniques that provide average seismic velocities in resolved volumes. However, characterizing elementary localized inhomogeneities of fault zones, such as cracks and fractures, constitutes a challenge for conventional techniques. Resolving these small-scale heterogeneities can provide detailed information for structural and mechanical models of fault zones. Recently, the reflection matrix approach utilizing body wave reflections in ambient noise cross-correlations was extended with the introduction of aberration corrections to handle the actual lateral velocity variations in the fault zone [Touma et al., Geophys. J. Int. 226, 780-794, 2021]. Here this method is applied further to analyze the distribution of scatterers in the first few kilometers of the crust in the San Jacinto Fault Zone at the Sage Brush Flat (SGB) site, southeast of Anza, California. The matrix approach allows us to image not only specular reflectors but also to resolve the presence, location and intensity of scatterers of seismic waves starting with a simple homogeneous background velocity model of the medium. The derived three-dimensional image of the fault zone resolves lateral variations of scattering properties in the region within and around the surface fault traces, as well as differences between the Northwest (NW) and the Southeast (SE) parts of the study area. A localized intense damage zone at depth is observed in the SE section, suggesting that a geometrical complexity of the fault zone at depth induces ongoing generation of rock damage.

physics.geo-ph↗

arXiv2022

Weight of single and recurrent scattering in the reflection matrix of complex media

In a heterogeneous medium, the wavefield can be decomposed as an infinite series known as the Born expansion. Each term of the Born expansion corresponds to a scattering order, it is thus theoretically possible to discriminate single and multiple scattering field components. Experimentally, what is actually measured is the total field in which all scattering orders interfere. Conventional imaging methods usually rely on the assumption that the multiple scattering contribution can be disregarded. In a back-scattering configuration, this assumption is valid for small depths, and begins to fail for depths larger than the scattering mean-free path $\ell_s$. It is therefore a key issue to estimate the relative amount of single and multiple scattering in experimental data. To this end, a single scattering estimator $\hatρ$ computed from the reflection matrix has been introduced in order to assess the weight of single scattering in the backscattered wavefield. In this article, the meaning of this estimator is investigated and a particular attention is given to recurrent scattering. In a diffraction-limited experiment, a multiple scattering sequence is said to be recurrent if the first and last scattering events occur in the same resolution cell. Recurrent scattering is shown to be responsible for correlations between single scattering and higher scattering orders of the Born expansion, inducing a bias to the estimator $\hatρ$ that should rather be termed confocal scattering ratio. Interestingly, a more robust estimator is built by projecting the reflection matrix in a focused basis. The argument is sustained by numerical simulations as well as ultrasonic data obtained around 1.5~MHz in a model medium made of nylon rods immersed in water. From a more general perspective, this work raises fundamental questions about the impact of recurrent scattering on wave imaging.

physics.app-ph↗

arXiv2022

Cloaking, Trapping and Superlensing of Lamb Waves with Negative Refraction

We report on experimental and numerical implementations of devices based on the negative refraction of elastic guided waves, the so-called Lamb waves. Consisting in plates of varying thickness, these devices rely on the concept of complementary media, where a particular layout of negative index media can cloak an object with its anti-object or trap waves around a negative corner. The diffraction cancellation operated by negative refraction is investigated by means of laser ultrasound experiments. However, unlike original theoretical predictions, these intriguing wave phenomena remain, nevertheless, limited to the propagating component of the wave-field. To go beyond the diffraction limit, negative refraction is combined with the concept of metalens, a device converting the evanescent components of an object into propagating waves. The transport of an evanescent wave-field is then possible from an object plane to a far-field imaging plane. Twenty years after Pendry's initial proposal, this work thus paves the way towards an elastic superlens.

physics.class-ph↗

arXiv2022

Crossover from renormalized to conventional diffusion near the 3D Anderson localization transition for light

We report on anomalous light transport in the strong scattering regime. Using low-coherence interferometry, we measure the reflection matrix of titanium dioxide powders, revealing crucial features of strong optical scattering which can not be observed with transmission measurements: (i) a subdiffusive regime of transport at early times of flight that is a direct consequence of predominant recurrent scattering loops, and (ii) a crossover to a conventional, but extremely slow, diffusive regime at long times. These observations support previous predictions that near-field coupling between scatterers prohibits Anderson localization of light in three-dimensional disordered media.

cond-mat.dis-nn↗

arXiv2021

Roadmap on Wavefront Shaping and deep imaging in complex media

The last decade has seen the development of a wide set of tools, such as wavefront shaping, computational or fundamental methods, that allow to understand and control light propagation in a complex medium, such as biological tissues or multimode fibers. A vibrant and diverse community is now working on this field, that has revolutionized the prospect of diffraction-limited imaging at depth in tissues. This roadmap highlights several key aspects of this fast developing field, and some of the challenges and opportunities ahead.

physics.optics↗

arXiv2021

Freeze-dried microfluidic monodisperse microbubbles as a new generation of ultrasound contrast agents

In the paper, we succeeded to freeze-dry monodisperse microbubbles without degrading their size and acoustic properties. We used microfluidic technology to generate highly monodisperse (coefficient of variation, CV<5%) microbubbles and optimized their formulation along with a cryoprotectant. By using a specific technique of retrieval of the bubble, we showed that freeze-drying the microbubbles does not alter their size distribution. To compare the fundamental resonance properties of the bubbles, we performed backscattered acoustic characterization measurements. Our experimental results revealed that the freeze-drying process conserved the acoustic properties of the bubbles. The maximum backscattering power amplitude of fresh and freeze-dried monodisperse PVA bubbles was around ten eight times higher than that of SonoVue at a similar concentration in vitro. By solving the question of storage and transportation of monodisperse bubbles, our work facilitates their penetration in the domain of UCAs, for performing new tasks and developing novel non-invasive measurements, such as pressure, unaccessible to the existing commercialized bubbles.

physics.med-ph↗

arXiv2021

Manifestation of aberrations in full-field optical coherence tomography

We report on a theoretical model for image formation in full-field optical coherence tomography (FFOCT). Because the spatial incoherence of the illumination acts as a virtual confocal pinhole in FFOCT, its imaging performance is equivalent to a scanning time-gated coherent confocal microscope. In agreement with optical experiments enabling a precise control of aberrations, FFOCT is shown to have nearly twice the resolution of standard imaging at moderate aberration level. Beyond a rigorous study on the sensitivity of FFOCT with respect to aberrations, this theoretical model paves the way towards an optimized design of adaptive optics and \rev{computational tools} for high-resolution and deep imaging of biological tissues.

physics.optics↗

arXiv2021

A Distortion Matrix Framework for High-Resolution Passive Seismic 3-D Imaging: Application to the San Jacinto Fault Zone, California

Reflection seismic imaging usually suffers from a loss of resolution and contrast because of the fluctuations of the wave velocities in the Earth's crust. In the literature, phase distortion issues are generally circumvented by means of a background wave velocity model. However, it requires a prior tomography of the wave velocity distribution in the medium, which is often not possible, especially in depth. In this paper, a matrix approach of seismic imaging is developed to retrieve a three-dimensional image of the subsoil, despite a rough knowledge of the background wave velocity. To do so, passive noise cross-correlations between geophones of a seismic array are investigated under a matrix formalism. More precisely, the detrimental effect of wave velocity fluctuations on imaging is overcome by introducing a novel mathematical object: The distortion matrix. This operator essentially connects any virtual source inside the medium with the distortion that a wavefront, emitted from that point, experiences due to heterogeneities. A time reversal analysis of the distortion matrix enables the estimation of the transmission matrix that links each real geophone at the surface and each virtual geophone in depth. Phase distortions can then be compensated for any point of the underground. Applied to seismic data recorded along the Clark branch of the San Jacinto fault zone, the present method is shown to provide an image of the fault until a depth of 4 km with a transverse resolution of 80 m. Strikingly, this resolution is almost one eighth below the diffraction limit imposed by the geophone array aperture. The heterogeneities of the subsoil play the role of a scattering lens and of a transverse wave guide which increase drastically the array aperture.

physics.geo-ph↗

arXiv2020

Distortion matrix concept for deep optical imaging in scattering media

In optical imaging, light propagation is affected by the inhomogeneities of the medium. Sample-induced aberrations and multiple scattering can strongly degrade the image resolution and contrast. Based on a dynamic correction of the incident and/or reflected wave-fronts, adaptive optics has been employed to compensate for those aberrations. However, it only applies to spatially-invariant aberrations or to thin aberrating layers. Here, we propose a global and non-invasive approach based on the distortion matrix concept. This matrix basically connects any focusing point of the image with the distorted part of its wave-front in reflection. A singular value decomposition of the distortion matrix allows to correct for high-order aberrations and forward multiple scattering over multiple isoplanatic modes. Proof-of-concept experiments are performed through biological tissues including a turbid cornea. We demonstrate a Strehl ratio enhancement up to 2500 and recover a diffraction-limited resolution until a depth of ten scattering mean free paths.

physics.optics↗

arXiv2020

Distortion matrix approach for ultrasound imaging of random scattering media

Focusing waves inside inhomogeneous media is a fundamental problem for imaging. Spatial variations of wave velocity can strongly distort propagating wavefronts and degrade image quality. Adaptive focusing can compensate for such aberration, but is only effective over a restricted field of view. Here, we introduce a full-field approach to wave imaging based on the concept of the distortion matrix. This operator essentially connects any focal point inside the medium with the distortion that a wavefront, emitted from that point, experiences due to heterogeneities. A time-reversal analysis of the distortion matrix enables the estimation of the transmission matrix that links each sensor and image voxel. Phase aberrations can then be unscrambled for any point, providing a full-field image of the medium with diffraction-limited resolution. Importantly, this process is particularly efficient in random scattering media, where traditional approaches such as adaptive focusing fail. Here, we first present an experimental proof-of-concept on a tissue mimicking phantom, and then apply the method to in vivo imaging of human soft tissues. While introduced here in the context of acoustics, this approach can also be extended to optical microscopy, radar or seismic imaging.

eess.IV↗

arXiv2020

Reflection matrix approach for quantitative imaging of scattering media

We present a physically intuitive matrix approach for wave imaging and characterization in scattering media. The experimental proof-of-concept is performed with ultrasonic waves, but this approach can be applied to any field of wave physics for which multi-element technology is available. The concept is that focused beamforming enables the synthesis, in transmit and receive, of an array of virtual transducers which map the entire medium to be imaged. The inter-element responses of this virtual array form a focused reflection matrix from which spatial maps of various characteristics of the propagating wave can be retrieved. Here we demonstrate: (i) a local focusing criterion that enables the image quality and the wave velocity to be evaluated everywhere inside the medium, including in random speckle, and (ii) an highly resolved spatial mapping of the prevalence of multiple scattering, which constitutes a new and unique contrast for ultrasonic imaging. The approach is demonstrated for a controllable phantom system, and for in vivo imaging of the human abdomen. More generally, this matrix approach opens an original and powerful route for quantitative imaging in wave physics.

physics.app-ph↗

arXiv2019

Negative reflection of elastic guided waves in chaotic and random scattering media

The propagation of waves in complex media can be harnessed either by taming the incident wave-field impinging on the medium or by forcing waves along desired paths through its careful design. These two alternative strategies have given rise to fascinating concepts such as time reversal or negative refraction. Here, we show how these two processes are intimately linked through the negative reflection phenomenon. A negative reflecting mirror converts a wave of positive phase velocity into its negative counterpart and vice versa. In this article, we experimentally demonstrate this phenomenon with elastic waves in a 2D billiard and in a disordered plate by means of laser interferometry. Despite the complexity of such configurations, the negatively reflected wave field focuses back towards the initial source location, thereby mimicking a phase conjugation operation while being a fully passive process. The super-focusing capability of negative reflection is also highlighted in a monochromatic regime. The negative reflection phenomenon is not restricted to guided elastic waves since it can occur in zero-gap systems such as photonic crystals, chiral metamaterials or graphene. Negative reflection can thus become a tool of choice for the control of waves in all fields of wave physics.

cond-mat.mtrl-sci↗

arXiv2019

Matrix Approach of Seismic Imaging: Application to the Erebus Volcano, Antarctica

Multiple scattering of seismic waves is often seen as a nightmare for conventional migration techniques that generally rely on a ballistic or a single scattering assumption. In heterogeneous areas such as volcanoes, the multiple scattering contribution limits the imaging-depth to one scattering mean free path, the mean distance between two successive scattering events for body waves. In this Letter, we propose a matrix approach of passive seismic imaging that pushes back this fundamental limit by making an efficient use of scattered body waves drowned into a noisy seismic coda. As a proof-of-concept, the case of the Erebus volcano in Antarctica is considered. The Green's functions between a set of geophones placed on top of the volcano are first retrieved by the cross-correlation of coda waves induced by multiple icequakes. This set of impulse responses forms a reflection matrix. By combining a matrix discrimination of singly-scattered waves with iterative time reversal, we are able to push back the multiple scattering limit beyond 10 scattering mean free paths. The matrix approach reveals the internal structure of the Erebus volcano: A chimney-shaped structure at shallow depths, a magma reservoir at 2500 m and several cavities at sea level and below it. The matrix approach paves the way towards a greatly improved monitoring of volcanic structures at depth. Beyond this specific case, the matrix approach of seismic imaging can generally be applied to all scales and areas where multiple scattering events undergone by body waves prevent in-depth imaging of the Earth's crust.

physics.geo-ph↗

arXiv2018

Negative refraction of Lamb modes: A theoretical study

This paper provides a theoretical investigation of negative refraction and focusing of elastic guided waves in a free-standing plate with a step-like thickness change. Under certain conditions, a positive phase velocity (forward) Lamb mode can be converted into a negative phase velocity (backward) mode at such interface, giving rise to negative refraction. A semi-analytical model is developed in order to study the influence of various parameters such as the material Poisson's coefficient, the step-like thickness, the frequency and the incidence angle. To this end, all the Lamb and shear horizontal propagating modes, but also a large number of their inhomogeneous and evanescent counterpart,s are taken into account. The boundary conditions applied to the stress-displacement fields at the thickness step yields an equation system. Its inversion provides the transmission and reflection coefficients between each mode at the interface. The step-like thickness and Poisson's ratio are shown to be key parameters to optimize the negative refraction process. In terms of material, Duralumin is found to be optimal as it leads to a nearly perfect conversion between forward and backward modes over broad frequency and angular ranges. An excellent focusing ability is thus predicted for a flat lens made of two symmetric thickness steps. Theoretical results are confirmed by a numerical FDTD simulation and experimental measurements made on an optimized Duralumin flat lens by means of laser interferometry. This theoretical study paves the way towards the optimization of elastic devices based on negative refraction, in particular for cloaking or super-focusing purposes.

physics.class-ph↗

arXiv2017

Multiple scattering limit in optical microscopy

Optical microscopy offers a unique insight of biological structures with a sub-micrometer resolution and a minimum invasiveness. However, the inhomogeneities of the specimen itself can induce multiple scattering of light and optical aberrations which limit the observation to depths close to the surface. To predict quantitatively the penetration depth in microscopy, we theoretically derive the single-to-multiple scattering ratio in reflection. From this key quantity, the multiple scattering limit is deduced for various microscopic imaging techniques such as confocal microscopy, optical coherence tomography and related methods.

physics.optics↗

arXiv2016

Smart optical coherence tomography for ultra-deep imaging through highly scattering media

Multiple scattering of waves in disordered media is a nightmare whether it be for detection or imaging purposes. The best approach so far to get rid of multiple scattering is optical coherence tomography. It basically combines confocal microscopy and coherence time-gating to discriminate ballistic photons from a predominant multiple scattering background. Nevertheless, the imaging depth range remains limited to 1 mm at best in human soft tissues. Here we propose a matrix approach of optical imaging to push back this fundamental limit. By combining a matrix discrimination of ballistic waves and iterative time-reversal, we show both theoretically and experimentally an extension of the imaging-depth limit by at least a factor two compared to optical coherence tomography. In particular, the reported experiment demonstrates imaging through a strongly scattering layer from which only one reflected photon over 1000 billion is ballistic. This approach opens a new route towards ultra-deep tissue imaging.

physics.optics↗

arXiv2016

Spatio-Temporal Imaging of Light Transport in Highly Scattering Media under White Light Illumination

Imaging the propagation of light in time and space is crucial in optics, notably for the study of complex media. We here demonstrate the passive measurement of time-dependent Green's functions between every point at the surface of a strongly scattering medium by means of low coherence interferometry. The experimental access to this Green's matrix is essential since it contains all the information about the complex trajectories of light within the medium. In particular, the spatio-temporal spreading of the diffusive halo and the coherent backscattering effect can be locally investigated in the vicinity of each point acting as a virtual source. On the one hand, this approach allows a quantitative imaging of the diffusion constant in the scattering medium with a spatial resolution of the order of a few transport mean free paths. On the other hand, our approach is able to reveal and quantify the anisotropy of light diffusion, which can be of great interest for optical characterization purposes. This study opens important perspectives both in optical diffuse tomography with potential applications to biomedical imaging and in fundamental physics for the experimental investigation of Anderson localization.

physics.optics↗