arXiv subjects

Alexandre Blais

Publications and source records attributed to Alexandre Blais.

At least 37 records · Page 2Linked to original sources

arXiv2024

Toolbox for nonreciprocal dispersive models in circuit QED

We provide a systematic method for constructing effective dispersive Lindblad master equations to describe weakly anharmonic superconducting circuits coupled by a generic dissipationless nonreciprocal linear system, with effective coupling parameters and decay rates written in terms of the immittance parameters characterizing the coupler. This article extends the foundational work of Solgun et al. (2019) for linear reciprocal couplers described by an impedance response. Notably, we expand the existing toolbox to incorporate nonreciprocal elements, account for direct stray coupling between immittance ports, circumvent potential singularities, and include collective dissipative effects that arise from interactions with external common environments. We illustrate the use of our results with a circuit of weakly anharmonic Josephson junctions coupled to a multiport nonreciprocal environment and a dissipative port. The results obtained here can be used for the design of complex superconducting quantum processors with nontrivial routing of quantum information, as well as analog quantum simulators of condensed matter systems.

quant-ph↗

arXiv2024

Deterministic generation of a 20-qubit two-dimensional photonic cluster state

Multidimensional cluster states are a key resource for robust quantum communication, measurement-based quantum computing and quantum metrology. Here, we present a device capable of emitting large-scale entangled microwave photonic states in a two dimensional ladder structure. The device consists of a pair of coupled superconducting transmon qubits which are each tuneably coupled to a common output waveguide. This architecture permits entanglement between each transmon and a deterministically emitted photonic qubit. By interleaving two-qubit gates with controlled photon emission, we generate 2 x n grids of time- and frequency-multiplexed cluster states of itinerant microwave photons. We measure a signature of localizable entanglement across up to 20 photonic qubits. We expect the device architecture to be capable of generating a wide range of other tensor network states such as tree graph states, repeater states or the ground state of the toric code, and to be readily scalable to generate larger and higher dimensional states.

quant-ph↗

arXiv2024

Low-depth Clifford circuits approximately solve MaxCut

We introduce a quantum-inspired approximation algorithm for MaxCut based on low-depth Clifford circuits. We start by showing that the solution unitaries found by the adaptive quantum approximation optimization algorithm (ADAPT-QAOA) for the MaxCut problem on weighted fully connected graphs are (almost) Clifford circuits. Motivated by this observation, we devise an approximation algorithm for MaxCut, \emph{ADAPT-Clifford}, that searches through the Clifford manifold by combining a minimal set of generating elements of the Clifford group. Our algorithm finds an approximate solution of MaxCut on an $N$-vertex graph by building a depth $O(N)$ Clifford circuit. The algorithm has runtime complexity $O(N^2)$ and $O(N^3)$ for sparse and dense graphs, respectively, and space complexity $O(N^2)$, with improved solution quality achieved at the expense of more demanding runtimes. We implement ADAPT-Clifford and characterize its performance on graphs with positive and signed weights. The case of signed weights is illustrated with the paradigmatic Sherrington-Kirkpatrick model, for which our algorithm finds solutions with ground-state mean energy density corresponding to $\sim94\%$ of the Parisi value in the thermodynamic limit. The case of positive weights is investigated by comparing the cut found by ADAPT-Clifford with the cut found with the Goemans-Williamson (GW) algorithm. For both sparse and dense instances we provide copious evidence that, up to hundreds of nodes, ADAPT-Clifford finds cuts of lower energy than GW.

quant-ph↗

arXiv2023

Qubit readouts enabled by qubit cloaking

Time-dependent drives play a crucial role in quantum computing efforts with circuit quantum electrodynamics. They enable single-qubit control, entangling logical operations, as well as qubit readout. However, their presence can lead to deleterious effects such as large ac-Stark shifts and unwanted qubit transitions ultimately reflected into reduced control or readout fidelities. Qubit cloaking was introduced in Lledó, Dassonneville, et al. [C. Lledó, R. Dassonneville, A. Moulinas et al., Nat. Commun. \textbf{14}, 6313 (2023)] to temporarily decouple the qubit from the coherent photon population of a driven cavity, allowing for the application of arbitrary displacements to the cavity field while avoiding the deleterious effects on the qubit. For qubit readout, cloaking permits to prearm the cavity with an, in principle, arbitrarily large number of photons, in anticipation to the qubit-state-dependent evolution of the cavity field, allowing for improved readout strategies. Here we take a closer look at two of them. First, arm-and-release readout, introduced together with qubit cloaking, where after arming the cavity the cloaking mechanism is released and the cavity field evolves under the application of a constant drive amplitude. Second, an arm-and-longitudinal readout scheme, where the cavity drive amplitude is slowly modulated after the release. We show that the two schemes complement each other, offering an improvement over the standard dispersive readout for any values of the dispersive interaction and cavity decay rate, as well as any target measurement integration time. Our results provide a recommendation for improving qubit readout without changes to the standard circuit QED architecture.

quant-ph↗

arXiv2023

Cloaking a qubit in a cavity

Cavity quantum electrodynamics (QED) uses a cavity to engineer the mode structure of the vacuum electromagnetic field such as to enhance the interaction between light and matter. Exploiting these ideas in solid-state systems has lead to circuit QED which has emerged as a valuable tool to explore the rich physics of quantum optics and as a platform for quantum computation. Here we introduce a simple approach to further engineer the light-matter interaction in a driven cavity by controllably decoupling a qubit from the cavity's photon population, effectively cloaking the qubit from the cavity. This is realized by driving the qubit with an external tone tailored to destructively interfere with the cavity field, leaving the qubit to interact with a cavity which appears to be in the vacuum state. Our experiment demonstrates how qubit cloaking can be exploited to cancel ac-Stark shift and measurement-induced dephasing, and to accelerate qubit readout.

quant-ph↗

arXiv2023

Fast Flux-Activated Leakage Reduction for Superconducting Quantum Circuits

Quantum computers will require quantum error correction to reach the low error rates necessary for solving problems that surpass the capabilities of conventional computers. One of the dominant errors limiting the performance of quantum error correction codes across multiple technology platforms is leakage out of the computational subspace arising from the multi-level structure of qubit implementations. Here, we present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. This operation removes leakage down to our measurement accuracy of $7\cdot 10^{-4}$ in approximately $50\, \mathrm{ns}$ with a low error of $2.5(1)\cdot 10^{-3}$ on the computational subspace, thereby reaching durations and fidelities comparable to those of single-qubit gates. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion to close to what can be achieved using leakage-rejection methods which do not scale. Our approach does neither require additional control electronics nor on-chip components and is applicable to both auxiliary and data qubits. These benefits make our method particularly attractive for mitigating leakage in large-scale quantum error correction circuits, a crucial requirement for the practical implementation of fault-tolerant quantum computation.

quant-ph↗

arXiv2023

Enhancing Dispersive Readout of Superconducting Qubits Through Dynamic Control of the Dispersive Shift: Experiment and Theory

The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from mid-circuit, real-time, measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and perhaps most importantly, quantum error correction. A prominent and widely-used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only $0.25\,\%$ in 100 ns integration time. Maintaining low readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout mode linewidth, which we quantify by considering the hybridization of the readout-resonator and its dedicated Purcell-filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity, fast, mid-circuit measurements.

quant-ph↗

arXiv2023

Cat-qubit-inspired gate on cos($2θ$) qubits

For $\cos(2θ)$ qubits based on voltage-controlled semiconductor nanowire Josephson junctions we introduce a single-qubit $Z$ gate inspired by the noise-bias preserving gate of the Kerr-cat qubit. This scheme relies on a $π$ rotation in phase space via a beamsplitter-like transformation between a qubit and ancilla qubit. The rotation is implemented by adiabatically changing the potential energies of the two qubits such as to preserve a double-well potential at all times. This gate constrains the dynamics in the subspace of a $\cos(2θ)$ qubit at all times, therefore yielding high-fidelity operation while preserving the qubit's coherence. We introduce a circuit to realize this gate and support our findings with numerical simulations.

quant-ph↗

arXiv2023

Engineering, control and longitudinal readout of Floquet qubits

Properties of time-periodic Hamiltonians can be exploited to increase the dephasing time of qubits and to design protected one and two-qubit gates. Recently, Huang et al. [Phys. Rev. Applied 15, 034065 (2021)] have shown that time-dependent Floquet states offer a manifold of working points with dynamical protection larger than the few usual static sweet spots. Here, we use the framework of many-mode Floquet theory to describe approaches to robustly control Floquet qubits in the presence of multiple drive tones. Following the same approach, we introduce a longitudinal readout protocol to measure the Floquet qubit without the need of first adiabatically mapping back the Floquet states to the static qubit states, which results in a significant speedup in the measurement time of the Floquet qubit. The analytical approach developed here can be applied to any Hamiltonian involving a small number of distinct drive tones, typically the study of standard parametric gates for qubits outside of the rotating-wave approximation.

quant-ph↗

arXiv2022

Reminiscence of classical chaos in driven transmons

Transmon qubits are ubiquitously used in superconducting quantum information processor architectures. Strong drives are required to realize fast, high-fidelity, gates and measurements, including parametrically activated processes. Here, we show that even off-resonant drives, in regimes routinely used in experiments, can cause strong modifications to the structure of the transmon spectrum rendering a large part of it chaotic. Accounting for the full nonlinear dynamics of the transmon in a Floquet-Markov formalism, we find that these chaotic states, often neglected through the hypothesis that the anharmonicity is weak, strongly impact the lifetime of the transmon's computational states. In particular, we observe that chaos-assisted quantum phase slips greatly enhance band dispersions. In the presence of a measurement resonator, we find that approaching chaotic behavior correlates with strong transmon-resonator hybridization, and an average resonator response centered on the bare resonator frequency. These results lead to a photon number threshold characterizing the appearance of chaos-induced quantum demolition effects during strong-drive operations such as dispersive qubit readout. The phenomena described here are expected to be present in all circuits based on low-impedance Josephson-junctions.

quant-ph↗

arXiv2022

Nonreciprocal devices based on voltage-tunable junctions

We propose to couple the flux degree of freedom of one mode with the charge degree of freedom of a second mode in a hybrid superconducting-semiconducting architecture. Nonreciprocity can arise in this architecture in the presence of external static magnetic fields alone. We leverage this property to engineer a passive on-chip gyrator, the fundamental two-port nonreciprocal device which can be used to build other nonreciprocal devices such as circulators. We analytically and numerically investigate how the nonlinearity of the interaction, circuit disorder and parasitic couplings affect the scattering response of the gyrator.

quant-ph↗

arXiv2022

Extensible circuit-QED architecture via amplitude- and frequency-variable microwaves

We introduce a circuit-QED architecture combining fixed-frequency qubits and microwave-driven couplers. In the appropriate frame, the drive parameters appear as tunable knobs enabling selective two-qubit coupling and coherent-error suppression. We moreover introduce a set of controlled-phase gates based on drive-amplitude and drive-frequency modulation. We develop a theoretical framework based on Floquet theory to model microwave-activated interactions with time-dependent drive parameters, which we also use for pulse shaping. We perform numerical simulations of the gate fidelity for realistic circuit parameters, and discuss the impact of drive-induced decoherence. We estimate average gate fidelities beyond $99.9\%$ for all-microwave controlled-phase operations with gate times in the range $50-120\,\mathrm{ns}$. These two-qubit gates can operate over a large drive-frequency bandwidth and in a broad range of circuit parameters, thereby improving extensibility. We address the frequency allocation problem for this architecture using perturbation theory, demonstrating that qubit, coupler and drive frequencies can be chosen such that undesired static and driven interactions remain bounded in a multi-qubit device. Our numerical methods are useful for describing the time-evolution of driven systems in the adiabatic limit, and are applicable to a wide variety of circuit-QED setups.

quant-ph↗

arXiv2022

Dynamics of Transmon Ionization

Qubit measurement and control in circuit QED rely on microwave drives, with higher drive amplitudes ideally leading to faster processes. However, degradation in qubit coherence time and readout fidelity has been observed even under moderate drive amplitudes corresponding to few photons populating the measurement resonator. Here, we numerically explore the dynamics of a driven transmon-resonator system under strong and nearly resonant measurement drives, and find clear signatures of transmon ionization where the qubit escapes out of its cosine potential. Using a semiclassical model, we interpret this ionization as resulting from resonances occurring at specific resonator photon populations. We find that the photon populations at which these spurious transitions occur are strongly parameter dependent and that they can occur at low resonator photon population, something which may explain the experimentally observed degradation in measurement fidelity.

quant-ph↗

arXiv2021

Realizing Repeated Quantum Error Correction in a Distance-Three Surface Code

Quantum computers hold the promise of solving computational problems which are intractable using conventional methods. For fault-tolerant operation quantum computers must correct errors occurring due to unavoidable decoherence and limited control accuracy. Here, we demonstrate quantum error correction using the surface code, which is known for its exceptionally high tolerance to errors. Using 17 physical qubits in a superconducting circuit we encode quantum information in a distance-three logical qubit building up on recent distance-two error detection experiments. In an error correction cycle taking only $1.1\,μ$s, we demonstrate the preservation of four cardinal states of the logical qubit. Repeatedly executing the cycle, we measure and decode both bit- and phase-flip error syndromes using a minimum-weight perfect-matching algorithm in an error-model-free approach and apply corrections in postprocessing. We find a low error probability of $3\,\%$ per cycle when rejecting experimental runs in which leakage is detected. The measured characteristics of our device agree well with a numerical model. Our demonstration of repeated, fast and high-performance quantum error correction cycles, together with recent advances in ion traps, support our understanding that fault-tolerant quantum computation will be practically realizable.

quant-ph↗

arXiv2021

Building a Quantum Engineering Undergraduate Program

The rapidly growing quantum information science and engineering (QISE) industry will require both quantum-aware and quantum-proficient engineers at the bachelor's level. We provide a roadmap for building a quantum engineering education program to satisfy this need. For quantum-aware engineers, we describe how to design a first quantum engineering course accessible to all STEM students. For the education and training of quantum-proficient engineers, we detail both a quantum engineering minor accessible to all STEM majors, and a quantum track directly integrated into individual engineering majors. We propose that such programs typically require only three or four newly developed courses that complement existing engineering and science classes available on most larger campuses. We describe a conceptual quantum information science course for implementation at any post-secondary institution, including community colleges and military schools. QISE presents extraordinary opportunities to work towards rectifying issues of inclusivity and equity that continue to be pervasive within engineering. We present a plan to do so and describe how quantum engineering education presents an excellent set of education research opportunities. Finally, we outline a hands-on training plan on quantum hardware, a key component of any quantum engineering program, with a variety of technologies including optics, atoms and ions, cryogenic and solid-state technologies, nanofabrication, and control and readout electronics. Our recommendations provide a flexible framework that can be tailored for academic institutions ranging from teaching and undergraduate-focused two- and four-year colleges to research-intensive universities.

physics.ed-ph↗

arXiv2021

Superconducting coupler with exponentially large on-off ratio

Tunable two-qubit couplers offer an avenue to mitigate errors in multiqubit superconducting quantum processors. However, most couplers operate in a narrow frequency band and target specific couplings, such as the spurious $ZZ$ interaction. We introduce a superconducting coupler that alleviates these limitations by suppressing all two-qubit interactions with an exponentially large on-off ratio and without the need for fine-tuning. Our approach is based on a bus mode supplemented by an ancillary nonlinear resonator mode. Driving the ancillary mode leads to a coupler-state-dependent field displacement in the resonator which, in turn, results in an exponential suppression of real and virtual two-qubit interactions with respect to the drive power. A superconducting circuit implementation supporting the proposed mechanism is presented.

quant-ph↗

arXiv2021

Accurate methods for the analysis of strong-drive effects in parametric gates

The ability to perform fast, high-fidelity entangling gates is an important requirement for a viable quantum processor. In practice, achieving fast gates often comes with the penalty of strong-drive effects that are not captured by the rotating-wave approximation. These effects can be analyzed in simulations of the gate protocol, but those are computationally costly and often hide the physics at play. Here, we show how to efficiently extract gate parameters by directly solving a Floquet eigenproblem using exact numerics and a perturbative analytical approach. As an example application of this toolkit, we study the space of parametric gates generated between two fixed-frequency transmon qubits connected by a parametrically driven coupler. Our analytical treatment, based on time-dependent Schrieffer-Wolff perturbation theory, yields closed-form expressions for gate frequencies and spurious interactions, and is valid for strong drives. From these calculations, we identify optimal regimes of operation for different types of gates including $i$SWAP, controlled-Z, and CNOT. These analytical results are supplemented by numerical Floquet computations from which we directly extract drive-dependent gate parameters. This approach has a considerable computational advantage over full simulations of time evolutions. More generally, our combined analytical and numerical strategy allows us to characterize two-qubit gates involving parametrically driven interactions, and can be applied to gate optimization and cross-talk mitigation such as the cancellation of unwanted ZZ interactions in multi-qubit architectures.

quant-ph↗

arXiv2021

Quantum-tailored machine-learning characterization of a superconducting qubit

Machine learning (ML) is a promising approach for performing challenging quantum-information tasks such as device characterization, calibration and control. ML models can train directly on the data produced by a quantum device while remaining agnostic to the quantum nature of the learning task. However, these generic models lack physical interpretability and usually require large datasets in order to learn accurately. Here we incorporate features of quantum mechanics in the design of our ML approach to characterize the dynamics of a quantum device and learn device parameters. This physics-inspired approach outperforms physics-agnostic recurrent neural networks trained on numerically generated and experimental data obtained from continuous weak measurement of a driven superconducting transmon qubit. This demonstration shows how leveraging domain knowledge improves the accuracy and efficiency of this characterization task, thus laying the groundwork for more scalable characterization techniques.

quant-ph↗