arXiv subjects

Alexandre Camsonne

Publications and source records attributed to Alexandre Camsonne.

11 recordsLinked to original sources

arXiv2026

Readout and PID using AIML for SoLID High Background Cherenkov Detectors

We present the development of readout electronics and artificial-intelligence-based particle-identification methods for the SoLID Cherenkov detectors at Jefferson Lab. To operate in the high-rate, high-background SoLID environment, we designed a MAROC sum readout system for multianode photomultiplier tubes that provides simultaneous pixel, quadrant-sum, and total-sum signals. Bench studies show that the system can sustain rates at or above those expected for SoLID while maintaining acceptable pedestal behavior and signal linearity. Using realistic Geant4 simulations for the heavy-gas Cherenkov detector, we then investigate $\pi/K$ separation with beam-related background. A simple photoelectron-counting cut is insufficient under these conditions, whereas multilayer perceptron models trained on PMT, quad, and pixel readout data perform substantially better. The quad and pixel readout schemes achieve pion and kaon efficiencies above 90\% and clearly outperform PMT-only readout. These results demonstrate that the combination of high-rate MAROC sum electronics and AIML-based pattern recognition provides a practical path toward robust SoLID Cherenkov PID.

physics.ins-det↗

arXiv2026

Electron Beam Profiling via Rydberg Electromagnetically Induced Transparency in Rubidium Vapor with Crossed Laser beams

We present an all-optical detection approach to determine the position and spatial profile of an electron beam based on quantum properties of alkali metal atoms. To measure the electric field, produced by an electron beam, we excite thermal rubidium atoms to a highly excited Rydberg state via a two-photon ladder transition and detect Stark shifts of Rydberg states by monitoring frequencies of the corresponding electromagnetically induced transparency (EIT) transmission peaks. We addressed several technical challenges in this approach. First, we use crossed laser beams to obtain spatial information about the electron beam position and geometry. Second, by pulsing the electron beam and using phase-sensitive optical detection, we separate the true electron beam electric signature from the parasitic electric fields due to photoelectric charges on the windows. Finally, we use a principle component analysis to further improve signal quality. We test this method to detect the current and to reconstruct a 2D profile of a 20 keV electron beam with currents ranging from 25 - 100 uA. While this technique provides less spatial resolution than fluorescence-based measurements, thanks to their speed and limited optical access requirements it can be useful for real-time non-invasive diagnostics of charged particle beams at accelerator facilities.

physics.atom-ph↗

arXiv2025

A Beamdump Facility at Jefferson Lab

This White Paper is exploring the potential of intense secondary muon, neutrino, and (hypothetical) light dark matter beams produced in interactions of high-intensity electron beams with beam dumps. Light dark matter searches with the approved Beam Dump eXperiment (BDX) are driving the realization of a new underground vault at Jefferson Lab that could be extended to a Beamdump Facility with minimal additional installations. The paper summarizes contributions and discussions from the International Workshop on Secondary Beams at Jefferson Lab (BDX & Beyond). Several possible muon physics applications and neutrino detector technologies for Jefferson Lab are highlighted. The potential of a secondary neutron beam will be addressed in a future edition.

physics.acc-ph↗

arXiv2025

Electron beam characterization via fluorescence imaging of Rydberg states in atomic vapor

We demonstrate an all-optical, minimally invasive method for electron beam (e-beam) characterization using Rydberg electrometry. The e-beam passes through a dilute Rb vapor prepared in a quantum superposition of ground and Rydberg states that reduces resonant absorption in a narrow spectral region. Imaging the modifications of Rb fluorescence due to shifts in the Rydberg state from the e-beam electric field allows us to reconstruct e-beam width, centroid position, and current. We experimentally demonstrate this technique using a 20 keV e-beam in the range of currents down to 20 $\mu$A, and discuss technical challenges produced by environmental electric potentials in the detection chamber. Overall, we demonstrate the promising potential of such an approach as a minimally invasive diagnostic for charged particle beams.

physics.atom-ph↗

arXiv2024

Electron Beam Characterization via Quantum Coherent Optical Magnetometry

We present a quantum optics-based detection method for determining the position and current of an electron beam. As electrons pass through a dilute vapor of rubidium atoms, their magnetic field perturb the atomic spin's quantum state and causes polarization rotation of a laser resonant with an optical transition of the atoms. By measuring the polarization rotation angle across the laser beam, we recreate a 2D projection of the magnetic field and use it to determine the e-beam position, size and total current. We tested this method for an e-beam with currents ranging from 30 to 110 {\mu}A. Our approach is insensitive to electron kinetic energy, and we confirmed that experimentally between 10 to 20 keV. This technique offers a unique platform for non-invasive characterization of charged particle beams used in accelerators for particle and nuclear physics research.

quant-ph↗

arXiv2024

Nuclear Dependence of Beam Normal Single Spin Asymmetry in Elastic Scattering from Nuclei

We propose to measure the beam normal single spin asymmetry in elastic scattering of transversely polarized electron from target nuclei with 12 $\leq Z \leq$ 90 at Q$^2$ = 0.0092 GeV$^2$ to study its nuclear dependence. While the theoretical calculations based on two-photon exchange suggest no nuclear dependence at this kinematics, the results of 208Pb from Jefferson Lab show a striking disagreement from both theoretical predictions and light nuclei measurements. The proposed measurements will provide new data for intermediate to heavy nuclei where no data exists for $Z \geq$ 20 in the kinematics of previous high-energy experiments. It will allow one to investigate the missing contributions that are not accounted in the current theoretical models.

nucl-ex↗

arXiv2022

The Solenoidal Large Intensity Device (SoLID) for JLab 12 GeV

The Solenoidal Large Intensity Device (SoLID) is a new experimental apparatus planned for Hall A at the Thomas Jefferson National Accelerator Facility (JLab). SoLID will combine large angular and momentum acceptance with the capability to handle very high data rates at high luminosity. With a slate of approved high-impact physics experiments, SoLID will push JLab to a new limit at the QCD intensity frontier that will exploit the full potential of its 12 GeV electron beam. In this paper, we present an overview of the rich physics program that can be realized with SoLID, which encompasses the tomography of the nucleon in 3-D momentum space from Semi-Inclusive Deep Inelastic Scattering (SIDIS), expanding the phase space in the search for new physics and novel hadronic effects in parity-violating DIS (PVDIS), a precision measurement of $J/\psi$ production at threshold that probes the gluon field and its contribution to the proton mass, tomography of the nucleon in combined coordinate and momentum space with deep exclusive reactions, and more. To meet the challenging requirements, the design of SoLID described here takes full advantage of recent progress in detector, data acquisition and computing technologies. In addition, we outline potential experiments beyond the currently approved program and discuss the physics that could be explored should upgrades of CEBAF become a reality in the future.

nucl-ex↗

arXiv2020

Performance of photosensors in a high-rate environment for gas Cherenkov detectors

The solenoidal large intensity device (SoLID) at Jefferson Lab will push the boundaries of luminosity for a large-acceptance detector, which necessitates the use of a light-gas threshold Cherenkov counter for online event selection. Due to the high luminosity, the single-photon background rate in this counter can exceed 160 kHz/cm$^2$ at the photosensors. Therefore, it is essential to validate the high-rate limits of the planned photosensors and readout electronics in order to mitigate the risk of failure. We report on the design and an early set of studies carried out using a small telescopic Cherenkov device in a high-rate environment up to 60 kHz/cm$^2$, in Hall C at Jefferson Lab. Commercially available multi-anode photomultipliers (MaPMT) and low-cost large-area picosecond photodetectors (LAPPD) were tested using the JLab FADC250 modules for readout. The test beam results show that the MaPMT array and the internal stripline LAPPD can detect and identify single-electron and pair-production events in high-rate environments. Due to its higher quantum efficiency, the MaPMT array provided a better separation between the single-electron and the pair-production events compared to the internal stripline LAPPD. A GEANT4 simulation confirms the experimental performance of our telescopic device.

physics.ins-det↗

arXiv2015

Beam Position Reconstruction for the g2p Experiment in Hall A at Jefferson Lab

Beam-line equipment was upgraded for experiment E08-027 (g2p) in Hall A at Jefferson Lab. Two beam position monitors (BPMs) were necessary to measure the beam position and angle at the target. A new BPM receiver was designed and built to handle the low beam currents (50-100 nA) used for this experiment. Two new super-harps were installed for calibrating the BPMs. In addition to the existing fast raster system, a slow raster system was installed. Before and during the experiment, these new devices were tested and debugged, and their performance was also evaluated. In order to achieve the required accuracy (1-2 mm in position and 1-2 mrad in angle at the target location), the data of the BPMs and harps were carefully analyzed, as well as reconstructing the beam position and angle event by event at the target location. The calculated beam position will be used in the data analysis to accurately determine the kinematics for each event.

physics.ins-det↗

arXiv2013

Exclusive Neutral Pion Electroproduction in the Deeply Virtual Regime

We present measurements of the ep->ep pi^0 cross section extracted at two values of four-momentum transfer Q^2=1.9 GeV^2 and Q^2=2.3 GeV^2 at Jefferson Lab Hall A. The kinematic range allows to study the evolution of the extracted hadronic tensor as a function of Q^2 and W. Results will be confronted with Regge inspired calculations and GPD predictions. An intepretation of our data within the framework of semi-inclusive deep inelastic scattering has also been attempted.

nucl-ex↗

arXiv2010

NaI (Tl) Calorimeter Calibration and Simulation for Coulomb Sum Rule Experiment in Hall-A at Jefferson Lab

A precision measurment of inclusive electron scattering cross sections was carried out at Jefferson Lab in the quasi-elastic region for ${^4}$He, ${^{12}}$C, ${^{56}}$Fe and ${^{208}}$Pb targets. Longitudinal ($R_{L}$) and transverse ($R_{T}$) response functions of nucleon were extracted in the momentum transfer range 0.55 GeV/c$\le$$|q|$$\le$1.0 GeV/c. To achieve the above goal, a NaI (Tl) calorimeter was used to distinguish good electrons from background including pions and low energy electrons rescattered from walls of the spectrometer magnets. Due to a large set of kinematics and changes in HV settings, a number of calibrations were performed for the NaI (Tl) detector. Corrections for a few blocks of NaI (Tl) with bad or no signal were applied. The resolution of NaI (Tl) detector after calibration reached $\frac{δE}{\sqrt{E}} \approx 3\%$ at E=1 GeV. The performance of NaI (Tl) detector was compared with a simulation.

nucl-ex↗