SearcharxivSearch

arXiv subjects

Alexandros Pitilakis

Publications and source records attributed to Alexandros Pitilakis.

At least 19 recordsLinked to original sources

RF-Fencing: A Novel RIS-Based Service for Proactive Covert Communications

Programmable wireless environments (PWEs), empowered by reconfigurable intelligent surfaces (RISes), have emerged as a transformative paradigm for next-generation networks, enabling deterministic control over electromagnetic (EM) propagation to enhance both performance and security. In this work, we introduce RF-Fencing, a novel RIS-enabled PWE service that enforces spatially selective control over wireless transmissions, simultaneously suppressing unwanted signal exposure while sustaining robust connectivity for legitimate users. To realize this vision, we develop SHIELD, a lightweight and scalable algorithm that orchestrates multiple RIS units by multiplexing precompiled codebook entries with real-time, low-complexity optimization. Through extensive evaluations across diverse frequencies, RIS configurations, and deployment scenarios, SHIELD demonstrates both far-field directional control and near-field quiet-zone creation, thereby enhancing network security. Our findings reveal that SHIELD effectively balances proactive covert communication with service delivery by dynamically managing multiple signal suppression and delivery areas, while enabling the realization of EM quiet zones with minimal impact on surrounding regions, ultimately establishing RF-Fencing as a practical RIS-based foundation for privacy-preserving and adaptive wireless environments in future 6G networks.

eess.SP

Analysis and Design of a Reconfigurable Metasurface based on Chalcogenide Phase-Change Material for Operation in the Near and Mid Infrared

We analyze, design and assess the performance of a reflective reconfigurable metasurface (MS) architecture for optical wireless communications. The device is based on the Ge-Sb-Te (GST225) phase-change material (PCM) alloy, thermally toggled between highly distinct amorphous and crystalline phase-states. We employ simple conductive MS patterns to tune its resonance frequency, while allowing the unit cell response to be analytically predicted using transmission line theory and equivalent circuits. The GST material dispersion is computed in its two extreme phase-states using a Drude/Tauc-Lorentz model (DTLM), whose parameters are fitted to state-of-the-art experimental data; the dispersion in intermediate partially crystallized phase-states is computed using the Lorentz-Lorenz formula. Our results, corroborated by full-wave simulations, demonstrate the potential of PCM materials for the implementation of continuously reconfigurable holographic metasurfaces operating in the infrared bands.

physics.optics

Equivalent Circuit Modeling of a Lumped-element Loaded Metasurface under Arbitrary Incidence and Polarization

In this work we develop a simple equivalent circuit model (ECM) that predicts the spectral response of a lumped-element loaded single patterned layer reflective metasurface. The proposed ECM maintains accuracy across varying design parameters including dual-polarization, arbitrary obliquity and azimuthal rotation of incidence plane, as well as physical dimensions of the lumped elements. Our approach is built incrementally, starting from an elementary unit cell which is extended to a 2-by-2 arrangement that allows for multifunctionality and reconfigurability in both polarizations, independently. These capabilities facilitate the design of tunable holographic metasurfaces which can implement reconfigurable intelligent surfaces (RIS) for advanced wireless communication systems. We evaluate the limitations and accuracy of the proposed ECM with full-wave simulations (FWS), which evidence robustness up to 45 degrees and thus highlight its aptitude as a rapid design tool or a guide for FWS-based optimization.

physics.optics

Dynamic Programmable Wireless Environment with UAV-mounted Static Metasurfaces

Reconfigurable intelligent surfaces (RISs) are artificial planar structures able to offer a unique way of manipulating propagated wireless signals. Commonly composed of a number of reconfigurable passive cell components and basic electronic circuits, RISs can almost freely perform a set of wave modification functionalities, in order to realize programmable wireless environments (PWEs). However, a more energy-efficient way to realize a PWE is through dynamically relocating static metasurfaces that perform a unique functionality. In this paper, we employ a UAV swarm to dynamically deploy a set of lowcost passive metasurfaces that are able to perform only one electromagnetic functionality, but with the benefit of requiring no power. Specifically, the UAV-mounted static metasurfaces are carefully positioned across the sky to create cascaded channels for improved user service and security hardening. The performance evaluation results, based on

cs.ET

Multi-Wideband Terahertz Communications via Tunable Graphene-based Metasurfaces in 6G Networks

The next generation of wireless networks is expected to tap into the terahertz (0.1--10 THz) band to satisfy the extreme latency and bandwidth density requirements of future applications. However, the development of systems in this band is challenging as THz waves confront severe spreading and penetration losses, as well as molecular absorption, which leads to strong line-of-sight requirements through highly directive antennas. Recently, reconfigurable intelligent surfaces (RISs) have been proposed to address issues derived from non-line-of-sight propagation, among other impairments, by redirecting the incident wave toward the receiver and implementing virtual-line-of-sight communications. However, the benefits provided by a RIS may be lost if the network operates at multiple bands. In this position paper, the suitability of the RIS paradigm in indoor THz scenarios for 6G is assessed grounded on the analysis of a tunable graphene-based RIS that can operate in multiple wideband transparency windows. A possible implementation of such a RIS is provided and numerically evaluated at 0.65/0.85/1.05 THz separately, demonstrating that beam steering and other relevant functionalities are realizable with excellent performance. Finally, the challenges associated with the design and fabrication of multi-wideband graphene-based RISs are discussed, paving the way to the concurrent control of multiple THz bands in the context of 6G networks.

physics.app-ph

Graphene optical nonlinearity: From the third-order to the non-perturbative electrodynamic regime

A non-perturbative model for graphene optical nonlinearity is developed for the study of ultrafast pulse propagation along a monolayer, as in the case of graphene-comprising nanophotonic integrated waveguides. This graphene `hot electron' model (GHEM) builds upon earlier work, based on the Fermi-Dirac framework for 2D semiconductors, which was aimed mainly at steady-state absorptive response of a monolayer under free-space laser-beam illumination. Our extension adapts the GHEM to in-plane light-matter interaction along graphene monolayers under intense ps-pulse excitation that leads to the carrier-density saturation regime. We first provide a quantitative overview of the `classic' perturbative third-order nonlinear response and then study the static and transient response of graphene as a function of the GHEM parameters, with focus on the monolayer quality and voltage-tunability. These results are compared to phenomenological models for saturable absorption and nonlinear refraction, showing good agreement with recent experimental works. In conclusion, the GHEM unifies the experimentally observed absorptive and refractive optical nonlinearities in a single multi-parametric framework therefore enabling the evaluation of the voltage-tunable light-matter interaction in structures such as diffraction-limited nanophotonic waveguides. This formalism can be readily employed to THz frequencies, adapted to multi-channel (e.g. pump-probe) nonlinear effects, or developed to include carrier and lattice-temperature diffusion to extend its validity threshold.

physics.optics

Asymmetric Si-slot Coupler with Nonreciprocal Response Based on Graphene Saturable Absorption

We present the study of a proof-of-concept integrated device that can be used as a nonlinear broadband isolator. The device is based on the asymmetric loading of a highly-confining silicon-slot photonic coupler with graphene layers, whose ultrafast and low-threshold saturable absorption can be exploited for nonreciprocal transmission between the cross-ports of the coupler. The structure is essentially a non-Hermitian system, whose exceptional points are briefly discussed. The nonlinear device is modeled with a coupled Schrodinger equation system whose validity is checked by full-vector finite element-based beam-propagation method simulations in CW. The numerically computed performance reveals a nonreciprocal intensity range (NRIR) in the vicinity of 100 mW peak power with a bandwidth spanning tens of nanometers, from CW down to ps-long pulses. Finally, the combination of saturable absorption and self-phase modulation (Kerr effect) in graphene is studied, indicating the existence of two NRIR with opposite directionality.

physics.optics

Breaking Reciprocity in a non-Hermitian Photonic Coupler with Saturable Absorption

We study the breaking of reciprocity in non-Hermitian coupled photonic waveguides by the simultaneous action of the nonlinear effect of saturable absorption, and the presence of exceptional points. The nonlinear response of such a system is studied in depth, giving physical insight into the operational principles and fundamental limitations, while producing analytical and semi-analytical results for the transmission and nonreciprocal intensity range. We numerically validate the theoretical results and assess important performance metrics for the nonreciprocal operation of such a device. This novel class of passive non-resonant devices can offer on-chip broadband nonreciprocal operation, making them potentially very important for high-speed applications.

physics.optics

A multi-functional reconfigurable metasurface: Electromagnetic design accounting for fabrication aspects

In this paper we present the theoretical considerations and the design evolution of a proof-of-concept reconfigurable metasurface, primarily used as a tunable microwave absorber, but also as a wavefront manipulation and polarization conversion device in reflection. We outline the design evolution and all considerations taken into account, from the selection of patch shape, unit cell size, and substrate, to the topology of the structure that realizes the desired tunability. The presented design conforms to fabrication restrictions and is co-designed to work with an integrated circuit chip for providing tunable complex loads to the metasurface, using a commercially available semiconductor process. The proposed structure can perform multiple tunable functionalities by appropriately biasing the integrated circuit: Perfect absorption for a wide range of incidence angles of both linear polarization states, accommodating a spectral range in the vicinity of 5 GHz, with potential also for wavefront control, exemplified via anomalous reflection and polarization conversion. The end vision is for such a design to be scalable and deployable as a practical HyperSurface, i.e., an intelligent multi-functional metasurface capable of concurrent reconfigurable functionalities: absorption, beam steering, polarization conversion, wavefront shaping, holography, and sensing.

physics.app-ph

Scalability Analysis of Programmable Metasurfaces for Beam Steering

Programmable metasurfaces have garnered significant attention as they confer unprecedented control over the electromagnetic response of any surface. Such feature has given rise to novel design paradigms such as Software-Defined Metamaterials (SDM) and Reconfigurable Intelligent Surfaces (RIS) with multiple groundbreaking applications. However, the development of programmable metasurfaces tailored to the particularities of a potentially broad application pool becomes a daunting task because the design space becomes remarkably large. This paper aims to ease the design process by proposing a methodology that, through a semi-analytical model of the metasurface response, allows to derive performance scaling trends as functions of a representative set of design variables. Although the methodology is amenable to any electromagnetic functionality, this paper explores its use for the case of beam steering at 26 GHz for 5G applications. Conventional beam steering metrics are evaluated as functions of the unit cell size, number of unit cell states, and metasurface size for different incidence and reflection angles. It is shown that metasurfaces 5$λ\times$5$λ$ or larger with unit cells of $λ/3$ and four unit cell states ensure good performance overall. Further, it is demonstrated that performance degrades significantly for angles larger than $θ> 60^o$ and that, to combat this, extra effort is needed in the development of the unit cell. These performance trends, when combined with power and cost models, will pave the way to optimal metasurface dimensioning.

physics.app-ph

Exploration of Intercell Wireless Millimeter-Wave Communication in the Landscape of Intelligent Metasurfaces

Software-defined metasurfaces are electromagnetically ultra-thin, artificial components that can provide engineered and externally controllable functionalities. The control over these functionalities is enabled by the metasurface tunability, which is implemented by embedded electronic circuits that modify locally the surface resistance and reactance. Integrating controllers within the metasurface cells, able to intercommunicate and adaptively reconfigure it, thus imparting a desired electromagnetic operation, opens the path towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing, programmable computing, and actuation facilities. In this work we take a crucial step towards bringing the AI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercell communication capabilities in a software-defined HyperSurface designed for operation is the microwave regime. We examine three different wireless communication channels within the landscape of the reflective metasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside a dedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each case we examine the physical implementation of the mm-wave transponder nodes, we quantify communication channel metrics, and we identify complexity vs. performance trade-offs.

physics.app-ph

The Software-Defined Metasurfaces Concept and Electromagnetic Aspects

We present the concept and electromagnetic aspects of HyperSurFaces (HSFs), artificial, ultrathin structures with software controlled electromagnetic properties. The HSFs key unit is the metasurface, a plane with designed subwavelength features whose electromagnetic response can be tuned via voltage-controlled continuously-tunable electrical elements that provide local control of the surface impedance and advanced functionalities, such as tunable perfect absorption or wavefront manipulation. A nanonetwork of controllers enables software defined HSFs control related to the emerging Internet of Things paradigm.

physics.app-ph

3D Channel Modeling and Characterization for Hypersurface Empowered Indoor Environment at 60 GHz Millimeter-Wave Band

This paper proposes a three-dimensional (3D) communication channel model for an indoor environment considering the effect of the Hypersurface. The Hypersurface is a software controlled intelligent metasurface, which can be used to manipulate electromagnetic waves, as for example for non-specular reflection and full absorption. Thus it can control the impinging rays from a transmitter towards a receiver location in both LOS and NLOS paths, e.g. to combat distance and improve wireless connectivity. We focus on the 60 GHz mmWave frequency band due to its increasing significance in 5G/6G networks and evaluate the effect of Hypersurface in an indoor environment in terms of attenuation coefficients related to the Hypersurface reflection and absorption functionalities, using CST simulation, a 3D electromagnetic simulator of high frequency components. To highlight the benefits of Hypersurface coated walls versus plain walls, we use the derived Hypersurface 3D channel model and a custom 3D ray-tracing simulator for plain walls considering a typical indoor scenario for different Tx-Rx location and separation distances.

eess.SP

Joint Compressed Sensing and Manipulation of Wireless Emissions with Intelligent Surfaces

Programmable, intelligent surfaces can manipulate electromagnetic waves impinging upon them, producing arbitrarily shaped reflection, refraction and diffraction, to the benefit of wireless users. Moreover, in their recent form of HyperSurfaces, they have acquired inter-networking capabilities, enabling the Internet of Material Properties with immense potential in wireless communications. However, as with any system with inputs and outputs, accurate sensing of the impinging wave attributes is imperative for programming HyperSurfaces to obtain a required response. Related solutions include field nano-sensors embedded within HyperSurfaces to perform minute measurements over the area of the HyperSurface, as well as external sensing systems. The present work proposes a sensing system that can operate without such additional hardware. The novel scheme programs the HyperSurface to perform compressed sensing of the impinging wave via simple one-antenna power measurements. The HyperSurface can jointly be programmed for both wave sensing and wave manipulation duties at the same time. Evaluation via simulations validates the concept and highlight its promising potential.

cs.ET

Intelligent Metasurfaces with Continuously Tunable Local Surface Impedance for Multiple Reconfigurable Functions

Electromagnetic metasurfaces can be characterized as intelligent if they are able to perform multiple tunable functions, with the desired response being controlled by a computer influencing the individual electromagnetic properties of each metasurface inclusion. In this paper, we present an example of an intelligent metasurface which operates in the reflection mode in the microwave frequency range. We numerically show that without changing the main body of the metasurface we can achieve tunable perfect absorption and tunable anomalous reflection. The tunability features can be implemented using mixed-signal integrated circuits (ICs), which can independently vary both the resistance and reactance, offering complete local control over the complex surface impedance. The ICs are embedded in the unit cells by connecting two metal patches over a thin grounded substrate and the reflection property of the intelligent metasurface can be readily controlled by a computer. Our intelligent metasurface can have significant influence on future space-time modulated metasurfaces and a multitude of applications, such as beam steering, energy harvesting, and communications.

physics.app-ph

Electromagnetic Aspects of Practical Approaches to Realization of Intelligent Metasurfaces

We thoroughly investigate the electromagnetic response of intelligent functional metasurfaces. We study two distinct designs operating at different frequency regimes, namely, a switch-fabric-based design for GHz frequencies and a graphene-based approach for THz band, and discuss the respective practical design considerations. The performance for tunable perfect absorption applications is assessed in both cases.

physics.app-ph

Tunable Perfect Anomalous Reflection in Metasurfaces with Capacitive Lumped Elements

We demonstrate tunable perfect anomalous reflection with metasurfaces incorporating lumped elements. The tunable capacitance of each element provides continuous control over the local surface reactance, allowing for controlling the evanescent field distribution and efficiently tilting the reflected wavefront away from the specular direction. The performance of the metasurface is evaluated for both TE and TM polarization and for reflection to the first and second diffraction order.

physics.app-ph

Software-Defined Metasurface Paradigm: Concept, Challenges, Prospects

HyperSurfaces (HSFs) are devices whose electromagnetic (EM) behavior is software-driven, i.e., it can be defined programmatically. The key components of this emerging technology are the metasurfaces, artificial layered materials whose EM properties depend on their internal subwavelength structuring. HSFs merge metasurfaces with a network of miniaturized custom electronic controllers, the nanonetwork, in an integrated scalable hardware platform. The nanonetwork receives external programmatic commands expressing the desired end-functionality and appropriately alters the metasurface configuration thus yielding the respective EM behavior for the HSF. In this work, we will present all the components of the HSF paradigm, as well as highlight the underlying challenges and future prospects.

physics.app-ph