Searcharxiv⌕ Search

arXiv subjects

Alexei Ashikhmin

Publications and source records attributed to Alexei Ashikhmin.

At least 19 recordsLinked to original sources
arXiv2026

Robust Multi-Stream Massive MIMO Satellite Systems Based on Statistical CSI

This paper investigates multi-stream downlink precoding for massive multiple-input multiple-output low-Earthorbit satellite (SAT) communication systems. We adopt a delay and Doppler precompensation approach to achieve coherent transmission. Under this setting, we formulate a signal transmission model that incorporates the near-independent properties of inter-SAT interference and compensation errors. We then demonstrate that moving beyond single-stream transmission requires both multi-SAT cooperation and multi-antenna UTs. Based on this configuration and the established signal transmission model, we derive the first- and second-order statistical channel characteristics and utilize them to design locally optimal precoding algorithms for both total power constraint (TPC) and per-antenna power constraint (PAPC) conditions, which rely only on statistical channel state information (sCSI). In particular, the designed PAPC algorithm achieves linear complexity with respect to the number of antennas on the cooperative SATs. To reduce the computational complexity of the locally optimal precoder under TPC, we propose a low-complexity and robust precoding scheme optimized for both minimum mean squared error and sum-rate maximization objectives. Using majorization theory, we also provide a rigorous theoretical analysis of the optimal precoding structure under TPC. Moreover, the Lanczos algorithm is adopted to further reduce the complexity of the proposed robust designs. Simulation results show that when each SAT is equipped with a sufficiently large number of antennas, the proposed sCSI-based designs achieve performance comparable to that of instantaneous CSI-based designs.

eess.SP↗
arXiv2026

Quantum-Channel Matrix Optimization for Holevo Bound Enhancement

Quantum communication holds the potential to revolutionize information transmission by enabling secure data exchange that exceeds the limits of classical systems. One of the key performance metrics in quantum information theory, namely the Holevo bound, quantifies the amount of classical information that can be transmitted reliably over a quantum channel. However, computing and optimizing the Holevo bound remains a challenging task due to its dependence on both the quantum input ensemble and the quantum channel. In order to maximize the Holevo bound, we propose a unified projected gradient ascent algorithm to optimize the quantum channel given a fixed input ensemble. We provide a detailed complexity analysis for the proposed algorithm. Simulation results demonstrate that the proposed quantum channel optimization yields higher Holevo bounds than input ensemble optimization.

quant-ph↗
arXiv2025

Transversal Toffoli-gate in Hybrid-code System

We study the transversality of the Toffoli gate in a hybrid-code system that employs two quantum error correction codes with special structure. We find that a system using a triorthogonal code with its paired code supports a fully transversal implementation of the Toffoli gate. Through circuit-level analysis, we prove the transversality of the Toffoli operation in this system. Based on this hybrid-code framework, we propose a Toffoli state distillation protocol that does not rely on pre-distilled $\mathbf{T}$-gate magic states. In our approach, the Toffoli state is directly distilled layer by layer within the hybrid-code system using only transversal operations. Numerical simulations demonstrate that our method uses approximately 50\% fewer qubit resources than previously reported protocols.

quant-ph↗
arXiv2025

Low Overhead Universal Quantum Computation with Triorthogonal Codes

We study the use of triorthogonal codes for universal fault-tolerant quantum computation and propose two methods to circumvent the Eastin-Knill theorem, which prohibits any single quantum error-correcting code from supporting both universality and a transversal gate set. We show that our methods reduce the resource overhead compared with existing fault-tolerant protocols. We develop a simple fault-tolerant implementation of the logical Hadamard gate for triorthogonal codes by exploiting the fact that they have transversal controlled-Z (CZ) gates, resulting in a circuit with reduced overhead. We also introduce a procedure for generating a symmetric Calderbank-Shor-Steane code paired with a triorthogonal code, which allows CNOT and CZ gate transversality across the pair of codes. In addition, we present logical state teleportation circuits that transfer encoded states between the two codes, allowing all logical operations to be performed transversally. Our methods can be integrated into the Steane error correction framework without incurring additional resource cost. Finally, using the 15-qubit code as an example, we demonstrate that our protocols significantly reduce the gate overhead compared with other existing methods. These results highlight the potential of combining distinct code structures to achieve low-overhead, universal fault-tolerant quantum computation.

quant-ph↗
arXiv2024

No Analog Combiner TTD-based Hybrid Precoding for Multi-User Sub-THz Communications

We address the design and optimization of real-world-suitable hybrid precoders for multi-user wideband sub-terahertz (sub-THz) communications. We note that the conventional fully connected true-time delay (TTD)-based architecture is impractical because there is no room for the required large number of analog signal combiners in the circuit board. Additionally, analog signal combiners incur significant signal power loss. These limitations are often overlooked in sub-THz research. To overcome these issues, we study a non-overlapping subarray architecture that eliminates the need for analog combiners. We extend the conventional single-user assumption by formulating an optimization problem to maximize the minimum data rate for simultaneously served users. This complex optimization problem is divided into two sub-problems. The first sub-problem aims to ensure a fair subarray allocation for all users and is solved via a continuous domain relaxation technique. The second sub-problem deals with practical TTD device constraints on range and resolution to maximize the subarray gain and is resolved by shifting to the phase domain. Our simulation results highlight significant performance gain for our real-world-ready TTD-based hybrid precoders.

eess.SP↗
arXiv2024

On Transversality Across Two Distinct Quantum Error Correction Codes For Quantum Repeaters

In this paper, we investigate the transversality of pairs of CSS codes and their use in the second generation of quantum repeaters (QR)s. We show that different stations of quantum link can experience different errors. Considering this fact, we suggest to use different CSS codes in different stations. We also suggest to use $[[n, k]]$ codes with $k > 1$ as they are more efficient then codes with $k = 1$. We establish sufficient and necessary conditions for a pair of CSS codes to be non-local CNOT-transversal. We show that in contrast to the well known CNOT transversality which states that two CSS codes should be the same, less restrictive constraints are needed. Next, we establish sufficient and necessary conditions for a code pair to be CZ-transversal.

quant-ph↗
arXiv2023

Rateless Coded Blockchain for Dynamic IoT Networks

A key constraint that limits the implementation of blockchain in Internet of Things (IoT) is its large storage requirement resulting from the fact that each blockchain node has to store the entire blockchain. This increases the burden on blockchain nodes, and increases the communication overhead for new nodes joining the network since they have to copy the entire blockchain. In order to reduce storage requirements without compromising on system security and integrity, coded blockchains, based on error correcting codes with fixed rates and lengths, have been recently proposed. This approach, however, does not fit well with dynamic IoT networks in which nodes actively leave and join. In such dynamic blockchains, the existing coded blockchain approaches lead to high communication overheads for new joining nodes and may have high decoding failure probability. This paper proposes a rateless coded blockchain with coding parameters adjusted to network conditions. Our goals are to minimize both the storage requirement at each blockchain node and the communication overhead for each new joining node, subject to a target decoding failure probability. We evaluate the proposed scheme in the context of real-world Bitcoin blockchain and show that both storage and communication overhead are reduced by 99.6\% with a maximum $10^{-12}$ decoding failure probability.

cs.DC↗
arXiv2023

Smart Hybrid Beamforming and Pilot Assignment for 6G Cell-Free Massive MIMO

This paper investigates Cell-Free massive MIMO networks, where each access point (AP) is equipped with a hybrid transceiver, reducing the complexity and cost compared to a fully digital transceiver. Asymptotic approximations for the spectral efficiency are derived for uplink and downlink. Capitalizing on these expressions, a max-min problem is formulated to optimize the (i) analog beamformer at the APs and (ii) pilot assignment. Simulations show that the optimization of these variables substantially increases the network performance.

cs.IT↗
arXiv2021

Cell-Free Massive MIMO with Low-Complexity Hybrid Beamforming

Cell-Free Massive Multiple-input Multiple-output (mMIMO) consists of many access points (APs) in a coverage area that jointly serve the users. These systems can significantly reduce the interference among the users compared to conventional MIMO networks and so enable higher data rates and a larger coverage area. However, Cell-Free mMIMO systems face multiple practical challenges such as the high complexity and power consumption of the APs' analog front-ends. Motivated by prior works, we address these issues by considering a low complexity hybrid beamforming framework at the APs in which each AP has a limited number of RF-chains to reduce power consumption, and the analog combiner is designed only using the large-scale statistics of the channel to reduce the system's complexity. We provide closed-form expressions for the signal to interference and noise ratio (SINR) of both uplink and downlink data transmission with accurate random matrix approximations. Also, based on the existing literature, we provide a power optimization algorithm that maximizes the minimum SINR of the users for uplink scenario. Through several simulations, we investigate the accuracy of the derived random matrix approximations, trade-off between the 95% outage data rate and the number of RF-chains, and the impact of power optimization. We observe that the derived approximations accurately follow the exact simulations and that in uplink scenario while using MMSE combiner, power optimization does not improve the performance much.

cs.IT↗
arXiv2021

Two-Stage Channel Estimation Approach for Cell-Free IoT With Massive Random Access

We investigate the activity detection and channel estimation issues for cell-free Internet of Things (IoT) networks with massive random access. In each time slot, only partial devices are active and communicate with neighboring access points (APs) using non-orthogonal random pilot sequences. Different from the centralized processing in cellular networks, the activity detection and channel estimation in cell-free IoT is more challenging due to the distributed and user-centric architecture. We propose a two-stage approach to detect the random activities of devices and estimate their channel states. In the first stage, the activity of each device is jointly detected by its adjacent APs based on the vector approximate message passing (Vector AMP) algorithm. In the second stage, each AP re-estimates the channel using the linear minimum mean square error (LMMSE) method based on the detected activities to improve the channel estimation accuracy. We derive closed-form expressions for the activity detection error probability and the mean-squared channel estimation errors for a typical device. Finally, we analyze the performance of the entire cell-free IoT network in terms of coverage probability. Simulation results validate the derived closed-form expressions and show that the cell-free IoT significantly outperforms the collocated massive MIMO and small-cell schemes in terms of coverage probability.

cs.IT↗
arXiv2021

Multi-point Coordination in Massive MIMO Systems with Sectorized Antennas

Non-cooperative cellular massive MIMO, combined with power control, is known to lead to significant improvements in per-user throughput compared with conventional LTE technology. In this paper, we investigate further refinements to massive MIMO, first, in the form of three-fold sectorization, and second, coordinated multi-point operation (with and without sectorization), in which the three base stations cooperate in the joint service of their users. For these scenarios, we analyze the downlink performance for both maximum-ratio and zero-forcing precoding and derive closed-form lower-bound expressions on the achievable rate of the users. These expressions are then used to formulate power optimization problems with two throughput fairness criteria: i) network-wide max-min fairness, and ii) per-cell max-min fairness. Furthermore, we provide centralized and decentralized power control strategies to optimize the transmit powers in the network. We demonstrate that employing sectorized antenna elements mitigates the detrimental effects of pilot contamination by rejecting a portion of interfering pilots in the spatial domain during channel estimation phase. Simulation results with practical sectorized antennas reveal that sectorization and multi-point coordination combined with sectorization lead to more than 1.7x and 2.6x improvements in the 95%-likely per-user throughput, respectively.

cs.IT↗
arXiv2021

Can Massive MIMO Support URLLC?

We investigate the feasibility of using Massive MIMO to support URLLC in both coherence interval based and 3GPP compliant pilot settings. We consider grant-free uplink transmission with MMSE receiver and adopt 3GPP channel models. In the coherence interval based pilot setting, by extensive system level simulations, we find that using a Massive MIMO base station with 128 antennas and MMSE receiver, URLLC requirements can be achieved in Urban Macro (UMa) Non-Line of Sight (NLoS) with orthogonal pilots and Neyman-Pearson detector. However, in the 3GPP compliant pilot setting, even by using the covariance matrix of Physical Resource Block (PRB) subcarriers for active UE detection and channel estimation as well as open-loop power control, we find that URLLC requirements are still challenging to achieve due to the insufficient pilot length and pilot symbol location regulations in a PRB.

cs.IT↗
arXiv2021

Unequal Error Protection Achieves Threshold Gains on BEC and BSC via Higher Fidelity Messages

Because of their capacity-approaching performance, graph-based codes have a wide range of applications, including communications and storage. In these codes, unequal error protection (UEP) can offer performance gains with limited rate loss. Recent empirical results in magnetic recording (MR) systems show that extra protection for the parity bits of a low-density parity-check (LDPC) code via constrained coding results in significant density gains. In particular, when UEP is applied via more reliable parity bits, higher fidelity messages of parity bits are spread to all bits by message passing algorithm, enabling performance gains. Threshold analysis is a tool to measure the effectiveness of a graph-based code or coding scheme. In this paper, we provide a theoretical analysis of this UEP idea using extrinsic information transfer (EXIT) charts in the binary erasure channel (BEC) and the binary symmetric channel (BSC). We use EXIT functions to investigate the effect of change in mutual information of parity bits on the overall coding scheme. We propose a setup in which parity bits of a repeat-accumulate (RA) LDPC code have lower erasure or crossover probabilities than input information bits. We derive the a-priori and extrinsic mutual information functions for check nodes and variable nodes of the code. After applying our UEP setup to the information functions, we formulate a linear programming problem to find the optimal degree distribution that maximizes the code rate under the decoding convergence constraint. Results show that UEP via higher fidelity parity bits achieves up to about $17\%$ and $28\%$ threshold gains on BEC and BSC, respectively.

cs.IT↗
arXiv2020

Optimally Supporting IoT with Cell-Free Massive MIMO

We study internet of things (IoT) systems supported by cell-free (CF) massive MIMO (mMIMO) with optimal linear channel estimation. For the uplink, we consider optimal linear MIMO receiver and obtain an uplink SINR approximation involving only large-scale fading coefficients using random matrix (RM) theory. Using this approximation we design several max-min power control algorithms that incorporate power and rate weighting coefficients to achieve a target rate with high energy efficiency. For the downlink, we consider maximum ratio (MR) beamforming. Instead of solving a complex quasi-concave problem for downlink power control, we employ a neural network (NN) technique to obtain comparable power control with around 30 times reduction in computation time. For large networks we proposed a different NN based power control algorithm. This algorithm is sub-optimal, but its big advantage is that it is scalable.

cs.IT↗
arXiv2020

A Scalable and Energy Efficient IoT System Supported by Cell-Free Massive MIMO

An IoT (Internet of things) system supports a massive number of IoT devices wirelessly. We show how to use Cell-Free Massive MIMO (multiple-input and multiple-output) to provide a scalable and energy efficient IoT system. We employ optimal linear estimation with random pilots to acquire CSI (channel state information) for MIMO precoding and decoding. In the uplink, we employ optimal linear decoder and utilize RM (random matrix) theory to obtain two accurate SINR (signal-to-interference plus noise ratio) approximations involving only large-scale fading coefficients. We derive several max-min type power control algorithms based on both exact SINR expression and RM approximations. Next, we consider the power control problem for downlink (DL) transmission. To avoid solving a time-consuming quasi-concave problem that requires repeat tests for the feasibility of a SOCP (second-order cone programming) problem, we develop a neural network (NN) aided power control algorithm that results in 30 times reduction in computation time. This power control algorithm leads to scalable Cell-Free Massive MIMO networks in which the amount of computations conducted by each AP does not depend on the number of network APs. Both UL and DL power control algorithms allow visibly improve the system spectral efficiency (SE) and, more importantly, lead to multi-fold improvements in Energy Efficiency (EE), which is crucial for IoT networks.

eess.SY↗
arXiv2020

Cell-Free Massive MIMO with Nonorthogonal Pilots for Internet of Things

We consider Internet of Things (IoT) organized on the principles of cell-free massive MIMO. Since the number of things is very large, orthogonal pilots cannot be assigned to all of them even if the things are stationary. This results in an unavoidable pilot contamination problem, worsened by the fact that, for IoT, since the things are operating at very low transmit power. To mitigate this problem and achieve a high throughput, we use cell-free systems with optimal linear minimum mean squared error (LMMSE) channel estimation, while traditionally simple suboptimal estimators have been used in such systems. We further derive the analytical uplink and downlink signal-to-interference-plus-noise ratio (SINR) expressions for this scenario, which depends only on large scale fading coefficients. This allows us to design new power control algorithms that require only infrequent transmit power adaptation. Simulation results show a 40% improvement in uplink and downlink throughputs and 95% in energy efficiency over existing cell-free wireless systems and at least a three-fold uplink improvement over known IoT systems based on small-cell systems.

eess.SP↗
arXiv2020

Long-term scheduling and power control for wirelessly powered cell-free IoT

We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harvested energy and the achievable rates that are independent of random pilots. Then, using these expressions, we formulate a long-term scheduling and power control problem to maximize the minimum time average achievable rate among all sensors, while maintaining the battery state of each sensor higher than a predefined minimum level. Using Lyapunov optimization, the transmission mode, the active sensor set, and the power control coefficients for each time slot are jointly determined. Finally, simulation results validate the accuracy of our derived closed-form expressions and reveal that the minimum time average achievable rate is boosted significantly by the proposed scheme compare with the simple greedy transmission scheme.

eess.SP↗