arXiv subjects

Alexey V. Ustinov

Publications and source records attributed to Alexey V. Ustinov.

At least 19 recordsLinked to original sources

arXiv2026

Stacked Josephson junctions for quantum circuit applications

Low-loss inductors are essential components in various superconducting circuits, such as qubits or digital electronics. In this study, we investigate highly compact inductors formed by vertical stacking of Josephson junctions. Our implementation employs multiple layers of aluminum separated by tunnel barriers. Individual stacks are connected by suspended superconducting bridges, which are free of additional dielectric materials and therefore should not contribute significantly to losses. We present implementation details, fabrication results, and device characterization measurements.

cond-mat.supr-con↗

arXiv2026

Low-loss Material for Infrared Protection of Cryogenic Quantum Applications

The fragile quantum states of low-temperature quantum applications require protection from infrared radiation caused by higher-temperature stages or other sources. We propose a material system that can efficiently block radiation up to the optical range while transmitting photons at low gigahertz frequencies. It is based on the effect that incident photons are strongly scattered when their wavelength is comparable to the size of particles embedded in a weakly absorbing medium (Mie-scattering). The goal of this work is to tailor the absorption and transmission spectrum of an non-magnetic epoxy resin containing sapphire spheres by simulating its dependence on the size distribution. Additionally, we fabricate several material compositions, characterize them, as well as other materials, at optical, infrared, and gigahertz frequencies. In the infrared region (stop band) the attenuation of the Mie-scattering optimized material is high and comparable to that of other commonly used filter materials. At gigahertz frequencies (pass-band), the prototype filter exhibits a high transmission at millikelvin temperatures, with an insertion loss of less than $0.4\,$dB below $10\,$GHz.

cond-mat.supr-con↗

arXiv2026

Mapping the positions of Two-Level-Systems on the surface of a superconducting transmon qubit

The coherence of superconducting quantum computers is severely limited by material defects that create parasitic two-level-systems (TLS). Progress is complicated by lacking understanding how TLS are created and in which parts of a qubit circuit they are most detrimental. Here, we present a method to determine the individual positions of TLS at the surface of a transmon qubit. We employ a set of on-chip gate electrodes near the qubit to generate local DC electric fields that are used to tune the TLS' resonance frequencies. The TLS position is inferred from the strengths at which TLS couple to different electrodes and comparing them to electric field simulations. We found that the majority of detectable surface-TLS was residing on the leads of the qubit's Josephson junction, despite the dominant contribution of its coplanar capacitor to electric field energy and surface area. This indicates that the TLS density is significantly enhanced near shadow-evaporated electrodes fabricated by lift-off techniques. Our method is useful to identify critical circuit regions where TLS contribute most to decoherence, and can guide improvements in qubit design and fabrication methods.

quant-ph↗

arXiv2025

Benchmarking the quality of multiplexed qubit readout beyond assignment fidelity

The accurate measurement of quantum two-level objects (qubits) is crucial for developing quantum computers. Over the last decade, the measure of choice for benchmarking readout routines for superconducting qubits has been assignment fidelity. However, this method only focuses on the preparation of computational basis states and therefore does not provide a complete characterization of the readout. Here, we expand the focus to the use of detector tomography to fully characterize multiqubit readout of superconducting transmon qubits. The impact of different readout parameters on the rate of information extraction is studied using quantum state reconstruction infidelity as a proxy. The results are then compared with assignment fidelities, showing good agreement for separable two-qubit states. We therefore propose the rate of infidelity convergence as a validation tool for assignment fidelity and a more comprehensive benchmark for single- and multiqubit readout optimization. To make the best use of experimental resources, we investigate the most efficient distribution of a limited shot budget between detector tomography and state reconstruction within the context of single- and two-qubit experiments. To address the growing interest in three-qubit gates and test scalability of the validation tool, we perform three-qubit quantum state tomography that goes beyond conventional readout-error-mitigation methods and find a factor of 30 reduction in quantum infidelity. Our results demonstrate that qubit readout correlations are not induced by a significantly reduced state distinguishability. Consequently, correlation coefficients can serve as a valuable tool in qubit readout optimization.

quant-ph↗

arXiv2025

Gradiometric, Fully Tunable C-Shunted Flux Qubits

Fully tunable flux qubits offer in-situ and independent controls of their energy potential asymmetry and tunnel barrier, making them versatile tools for quantum computation and the study of decoherence sources. However, only short coherence times have been demonstrated so far with this type of qubit. Here, we present a capacitively shunted flux qubit featuring improved relaxation times up to T1 = 25 $μ$s and a frequency tunability range of $\sim$ 20 GHz at the flux-insensitive sweet spot. As a model application, we demonstrate detection of two-level tunneling defects in a frequency range spanning one octave.

quant-ph↗

arXiv2025

Investigation of Parasitic Two-Level Systems in Merged-Element Transmon Qubits

In conventional transmon qubits, decoherence is dominated by a large number of parasitic two-level systems (TLS) residing at the edges of its large area coplanar shunt capacitor and junction leads. Avoiding these defects by improvements in design, fabrication and materials proved to be a significant challenge that so far led to limited progress. The merged-element transmon qubit (''mergemon''), a recently proposed paradigm shift in transmon design, attempts to address these issues by engineering the Josephson junction to act as its own shunt capacitor. With its energy mostly confined within the junctions, efforts required to improve qubit coherence can be concentrated on the junction barrier, a potentially easier to control interface compared to exposed circuit areas. Incorporating an additional aluminium deposition and oxidation into the in-situ bandaged Niemeyer-Dolan technique, we were able to fabricate flux-tunable mergemon qubits achieving mean $T_{1}$ relaxation times of up to $130μs$ ($Q \approx 3.3 \times 10^{6}$). TLS spectroscopy under applied strain and electric fields, together with systematic design variations, revealed that even for mergemon qubits - despite their significantly reduced footprint and increased junction barrier volume - careful design considerations are still essential to avoid coherence limitations due to surface loss.

cond-mat.supr-con↗

arXiv2025

Mitigation of correlated readout errors without randomized measurements

Quantum simulation, the study of strongly correlated quantum matter using synthetic quantum systems, has been the most successful application of quantum computers to date. It often requires determining observables with high precision, for example when studying critical phenomena near quantum phase transitions. Thus, readout errors must be carefully characterized and mitigated in data postprocessing, using scalable and noise-model agnostic protocols. We present a readout error-mitigation protocol that uses only single-qubit Pauli measurements and avoids experimentally challenging randomized measurements. The proposed approach captures a very broad class of correlated noise models and is scalable to large qubit systems. It is based on a complete and efficient characterization of few-qubit correlated positive operator-valued measures, using overlapping detector tomography. To assess the effectiveness of the protocol, observables are extracted from simulations involving up to 100 qubits employing readout errors obtained from experiments with superconducting qubits.

quant-ph↗

arXiv2025

Dielectric waveguide setup tested with a superconducting millimeter-wave Fabry-Pérot interferometer at milli-Kelvin temperatures

We propose and test a cryogenic setup comprising dielectric waveguides for mm-wave frequencies in the range of 75-110 GHz and temperatures down to 10 mK. The targeted applications are quantum technologies at millimeter-wave frequencies, which require measurements at low photon numbers and noise. We show that the high density polyethylene waveguides combine a frequency independent low photon loss with a very low heat conductance. Black high density polyethylene shows a higher attenuation, which is useful to block thermal photons in a cryogenic environment. The dielectric waveguides are thermally anchored and attenuated at several stages of the cryostat. They are individually protected by additional metallic shields to suppress mutual cross-talk and external interference. With this setup, multiple superconducting resonances of a Fabry-Pérot cavity were measured at 10 mK. We find quality factors up to 15 million in the single photon limit for resonances above 100 GHz. These results show no evident influence of atomic two-level systems in the cavity.

physics.app-ph↗

arXiv2024

Readout error mitigated quantum state tomography tested on superconducting qubits

Quantum technologies rely heavily on accurate control and reliable readout of quantum systems. Current experiments are limited by numerous sources of noise that can only be partially captured by simple analytical models and additional characterization of the noise sources is required. We test the ability of readout error mitigation to correct realistic noise found in systems composed of quantum two-level objects (qubits). To probe the limit of such methods, we designed a beyond-classical readout error mitigation protocol based on quantum state tomography (QST), which estimates the density matrix of a quantum system, and quantum detector tomography (QDT), which characterizes the measurement procedure. By treating readout error mitigation in the context of state tomography the method becomes largely readout mode-, architecture-, noise source-, and quantum state-independent. We implement this method on a superconducting qubit and evaluate the increase in reconstruction fidelity for QST. We characterize the performance of the method by varying important noise sources, such as suboptimal readout signal amplification, insufficient resonator photon population, off-resonant qubit drive, and effectively shortened $T_1$ and $T_2$ decay times. As a result, we identified noise sources for which readout error mitigation worked well, and observed decreases in readout infidelity by a factor of up to 30.

quant-ph↗

arXiv2024

Two-level system hyperpolarization using a quantum Szilard engine

The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Implementing a quantum Szilard engine with an active feedback control loop allows us to decide whether the qubit heats or cools its TLS environment. The TLSs can be cooled down resulting in a four times lower qubit population, or they can be heated to manifest themselves as a negative temperature environment corresponding to a qubit population of $\sim 80\,\%$. We show that the TLSs and the qubit are each other's dominant loss mechanism and that the qubit relaxation is independent of the TLS populations. Understanding and mitigating TLS environments is therefore not only crucial to improve qubit lifetimes but also to avoid non-Markovian qubit dynamics.

quant-ph↗

arXiv2023

Observation of giant two-level systems in a granular superconductor

Disordered thin films are a common choice of material for superconducting, high impedance circuits used in quantum information or particle detector physics. A wide selection of materials with different levels of granularity are available, but, despite low microwave losses being reported for some, the high degree of disorder always implies the presence of intrinsic defects. Prominently, quantum circuits are prone to interact with two-level systems (TLS), typically originating from solid state defects in the dielectric parts of the circuit, like surface oxides or tunneling barriers. We present an experimental investigation of TLS in granular aluminum thin films under applied mechanical strain and electric fields. The analysis reveals a class of strongly coupled TLS having electric dipole moments up to 30 eA, an order of magnitude larger than dipole moments commonly reported for solid state defects. Notably, these large dipole moments appear more often in films with a higher resistivity. Our observations shed new light on granular superconductors and may have implications for their usage as a quantum circuit material.

cond-mat.supr-con↗

arXiv2023

Non-degenerate parametric amplifiers based on dispersion engineered Josephson junction arrays

Determining the state of a qubit on a timescale much shorter than its relaxation time is an essential requirement for quantum information processing. With the aid of a new type of non-degenerate parametric amplifier, we demonstrate the continuous detection of quantum jumps of a transmon qubit with 90% fidelity in state discrimination. Entirely fabricated with standard two-step optical lithography techniques, this type of parametric amplifier consists of a dispersion engineered Josephson junction (JJ) array. By using long arrays, containing $10^3$ JJs, we can obtain amplification at multiple eigenmodes with frequencies below $10~\mathrm{GHz}$, which is the typical range for qubit readout. Moreover, by introducing a moderate flux tunability of each mode, employing superconducting quantum interference device (SQUID) junctions, a single amplifier device could potentially cover the entire frequency band between 1 and $10~\mathrm{GHz}$.

quant-ph↗

arXiv2023

Implementation of a transmon qubit using superconducting granular aluminum

The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for strongly driven quantum circuits, topological superconductivity, and hybrid systems. Having said that, can the grAl non-linearity be sufficient to build a qubit? Here we show that a small grAl volume ($10 \times 200 \times 500 \,\mathrm{nm^3}$) shunted by a thin film aluminum capacitor results in a microwave oscillator with anharmonicity $α$ two orders of magnitude larger than its spectral linewidth $Γ_{01}$, effectively forming a transmon qubit. With increasing drive power, we observe several multi-photon transitions starting from the ground state, from which we extract $α= 2 π\times 4.48\,\mathrm{MHz}$. Resonance fluorescence measurements of the $|0> \rightarrow |1>$ transition yield an intrinsic qubit linewidth $γ= 2 π\times 10\,\mathrm{kHz}$, corresponding to a lifetime of $16\,\mathrm{μs}$. This linewidth remains below $2 π\times 150\,\mathrm{kHz}$ for in-plane magnetic fields up to $\sim70\,\mathrm{mT}$.

quant-ph↗

arXiv2023

Enhancing the Coherence of Superconducting Quantum Bits with Electric Fields

In the endeavour to make quantum computers a reality, integrated superconducting circuits have become a promising architecture. A major challenge of this approach is decoherence originating from spurious atomic tunneling defects at the interfaces of qubit electrodes, which may resonantly absorb energy from the qubit's oscillating electric field and reduce the qubit's energy relaxation time $T_1$. Here, we show that qubit coherence can be improved by tuning dominating defects away from the qubit resonance using an applied DC-electric field. We demonstrate a method that optimizes the applied field bias and enhances the 30-minute averaged qubit $T_1$ time by 23\%. We also discuss how local gate electrodes can be implemented in superconducting quantum processors to enable simultaneous in-situ coherence optimization of individual qubits.

quant-ph↗

arXiv2023

Random telegraph fluctuations in granular microwave resonators

Microwave circuit electrodynamics of disordered superconductors is a very active research topic spawning a wide range of experiments and applications. For compact superconducting circuit elements, the transition to an insulating state poses a limit to the maximum attainable kinetic inductance. It is therefore vital to study the fundamental noise properties of thin films close to this transition, particularly in situations where a good coherence and temporal stability is required. In this paper, we present measurements on superconducting granular aluminum microwave resonators with high normal state resistances, where the influence of the superconductor to insulator phase transition is visible. We trace fluctuations of the fundamental resonance frequency and observe, in addition to a 1/f noise pattern, a distinct excess noise, reminiscent of a random telegraph signal. The excess noise shows a strong dependency on the resistivity of the films as well as the sample temperature, but not on the applied microwave power.

cond-mat.supr-con↗

arXiv2022

Quantum emulation of the transient dynamics in the multistate Landau-Zener model

Quantum simulation is one of the most promising near term applications of quantum computing. Especially, systems with a large Hilbert space are hard to solve for classical computers and thus ideal targets for a simulation with quantum hardware. In this work, we study experimentally the transient dynamics in the multistate Landau-Zener model as a function of the Landau-Zener velocity. The underlying Hamiltonian is emulated by superconducting quantum circuit, where a tunable transmon qubit is coupled to a bosonic mode ensemble comprising four lumped element microwave resonators. We investigate the model for different initial states: Due to our circuit design, we are not limited to merely exciting the qubit, but can also pump the harmonic modes via a dedicated drive line. Here, the nature of the transient dynamics depends on the average photon number in the excited resonator. The greater effective coupling strength between qubit and higher Fock states results in a quasi-adiabatic transition, where coherent quantum oscillations are suppressed without the introduction of additional loss channels. Our experiments pave the way for more complex simulations with qubits coupled to an engineered bosonic mode spectrum.

quant-ph↗

arXiv2022

Probing defect densities at the edges and inside Josephson junctions of superconducting qubits

Tunneling defects in disordered materials form spurious two-level systems which are a major source of decoherence for micro-fabricated quantum devices. For superconducting qubits, defects in tunnel barriers of submicrometer-sized Josephson junctions couple strongest to the qubit, which necessitates optimization of the junction fabrication to mitigate defect formation. Here, we investigate whether defects appear predominantly at the edges or deep within the amorphous tunnel barrier of a junction. For this, we compare defect densities in differently shaped Al/AlO$_x$/Al Josephson junctions that are part of a Transmon qubit. We observe that the number of detectable junction-defects is proportional to the junction area, and does not significantly scale with the junction's circumference, which proposes that defects are evenly distributed inside the tunnel barrier. Moreover, we find very similar defect densities in thermally grown tunnel barriers that were formed either directly after the base electrode was deposited, or in a separate deposition step after removal of native oxide by Argon ion milling.

quant-ph↗

arXiv2022

Slowing down light in a qubit metamaterial

The rapid progress in quantum information processing leads to a rising demand for devices to control the propagation of electromagnetic wave pulses and to ultimately realize a universal and efficient quantum memory. While in recent years significant progress has been made to realize slow light and quantum memories with atoms at optical frequencies, superconducting circuits in the microwave domain still lack such devices. Here, we demonstrate slowing down electromagnetic waves in a superconducting metamaterial composed of eight qubits coupled to a common waveguide, forming a waveguide quantum electrodynamics system. We analyze two complementary approaches, one relying on dressed states of the Autler-Townes splitting, and the other based on a tailored dispersion profile using the qubits tunability. Our time-resolved experiments show reduced group velocities of down to a factor of about 1500 smaller than in vacuum. Depending on the method used, the speed of light can be controlled with an additional microwave tone or an effective qubit detuning. Our findings demonstrate high flexibility of superconducting circuits to realize custom band structures and open the door to microwave dispersion engineering in the quantum regime.

quant-ph↗