arXiv subjects

Alexey Vinel

Publications and source records attributed to Alexey Vinel.

At least 19 recordsLinked to original sources

arXiv2026

Integrating Traffic Noise Emission Modelling into Variable Speed Limit Control

Road traffic noise remains a major environmental challenge, yet most speed management strategies are static and do not respond to short-term variations in traffic noise emissions. Although variable speed limit (VSL) systems are widely deployed for safety and congestion mitigation, traffic noise is rarely treated as an explicit operational control objective. This paper proposes a noise-aware VSL framework that integrates aggregated traffic-state estimation with a simplified CNOSSOS-EU-based emission indicator. A stage-based controller with time-varying reference thresholds dynamically adjusts discrete speed-limit levels in response to estimated emission conditions. The framework is evaluated using microscopic traffic simulation calibrated with empirical motorway data and replicated across multiple stochastic realisations. Over a 24-hour evaluation period, the adaptive strategy reduces the receiver-based equivalent sound level by 2.9 dB(A) relative to unrestricted traffic conditions, while maintaining an average vehicle speed approximately 11.3 km/h higher than a permanently imposed low-speed regime. Period-wise analysis shows that speed reductions are activated selectively when emission levels approach calibrated targets, rather than enforcing a constant intermediate limit. Traffic stability indicators reveal moderate increases in speed variability compared with unrestricted operation, but substantially lower braking intensity than under uniform low-speed enforcement. These results demonstrate the feasibility of integrating environmental performance indicators into operational speed control, providing a practical complement to conventional infrastructure-based noise mitigation measures.

cs.RO↗

arXiv2026

Towards Collaborative Joint Perception and Prediction: Framework, Baseline Evaluation, and Deployment Perspectives

Connected Autonomous Vehicles (CAVs) increasingly exploit Vehicle-to-Everything (V2X) communication to exchange multi-source sensor information, enabling advanced Collaborative Perception (CP) capabilities. Extending beyond these capabilities, this work focuses on Collaborative Joint Perception and Prediction (Co-P&P), a paradigm that unifies CP with motion prediction to mitigate two persistent challenges: the accumulation of perception errors and visual occlusions. We present a conceptual framework for Collaborative Joint Perception and Prediction (Co-P&P) that improves motion prediction of surrounding road users, thereby enhancing situational awareness in complex and dynamic traffic environments. Building upon our preliminary study, this extended version compares the performance of different fusion strategies and establishes baseline performance for a modular design of perception and prediction. Experimental results show that prediction-level fusion leads to a decline in overall system performance compared to detection-level or tracking-level fusion. We further implement a minimal end-to-end Co-P&P prototype that couples collaborative point-cloud sharing via the RENO neural codec with joint detection-forecasting via FutureDet, showing that collaboration improves forecasting accuracy while neural compression preserves this benefit at roughly 34x lower communication bandwidth.

cs.CV↗

arXiv2026

Scalable Intention Sharing for ETSI VAMs

Efficient maneuver coordination in dense V2X environments requires accurate short-term prediction while maintaining low communication and computational overhead. Current European Telecommunications Standards Institute (ETSI)-compliant approaches rely on intention detection and trajectory vector transmission, which scale poorly with neighborhood size and prediction horizon. This paper revisits maneuver coordination from an intention sharing perspective and investigates geometric encodings that enable scalable communication. First, we analyze three ETSI-compliant encodings, trajectory vectors, N-polygons, and uncertainty ellipses, through complexity analysis and simulation-based CPU measurements. Results show that uncertainty ellipses reduce computational complexity by an order of magnitude compared with trajectory vectors while maintaining a constant message size. Building on this, an Extended Kalman Filter is used to generate short-horizon predictions, which are encoded as uncertainty ellipses to represent the intended maneuver. The prediction pipeline is evaluated using real-world GNSS trajectories collected from cyclist maneuvers on a controlled test track, demonstrating that the approach achieves reliable multisecond prediction horizons while maintaining scalability for dense V2X environments.

cs.NI↗

arXiv2026

Cooperative Robotics Reinforced by Collective Perception for Traffic Moderation

Collisions at non-line-of-sight (NLOS) intersections remain a major safety concern because drivers have limited visibility of approaching traffic. V2X based warnings can reduce these risks, yet many vehicles are not equipped with V2X and drivers may ignore in vehicle alerts. Collective perception (CP) can compensate for low V2X penetration by extending the awareness of connected vehicles, but it cannot influence unconnected vehicles. To fill this gap, our work introduces a complementary concept that adds a cooperative humanoid robot as an active traffic moderator capable of physically stopping a vehicle that attempts to merge into an unseen traffic stream. The system operates on two parallel perception pathways. A dual camera infrastructure unit detects the position, speed and motion of approaching vehicles and transmits this information to the robot as a collective perception message (CPM). The robot also receives cooperative awareness messages (CAM) from connected vehicles through its onboard V2X unit and can act as a relay for decentralized environmental notification messages (DENM) when safety events originate elsewhere along the road. A fusion module combines these streams to maintain a robust real time view of the main road. A Zone of Danger (ZoD) is defined and used to predict whether an approaching vehicle creates a collision risk for a merging road user. When such a risk is detected, the robot issues a human-like STOP gesture and blocks the merging path until the hazard disappears. The full system was deployed at the Future Mobility Park (FMP) in Rotterdam. Experiments show that the combined vision and V2X perception allows the robot to detect approaching vehicles early, predict hazards reliably and prevent unsafe merges in real world NLOS conditions.

cs.RO↗

arXiv2026

TriBand-BEV: Real-Time LiDAR-Only 3D Pedestrian Detection via Height-Aware BEV and High-Resolution Feature Fusion

Safe autonomous agents and mobile robots need fast real time 3D perception, especially for vulnerable road users (VRUs) such as pedestrians. We introduce a new bird's eye view (BEV) encoding, which maps the full 3D LiDAR point cloud into a light-weight 2D BEV tensor with three height bands. We explicitly reformulate 3D detection as a 2D detection problem and then reconstruct 3D boxes from the BEV outputs. A single network detects cars, pedestrians, and cyclists in one pass. The backbone uses area attention at deep stages, a hierarchical bidirectional neck over P1 to P4 fuses context and detail, and the head predicts oriented boxes with distribution focal learning for side offsets and a rotated IoU loss. Training applies a small vertical re bin and a mild reflectance jitter in channel space to resist memorization. We use an interquartile range (IQR) filter to remove noisy and outlier LiDAR points during 3D reconstruction. On KITTI dataset, TriBand-BEV attains 58.7/52.6/47.2 pedestrian BEV AP(%) for easy, moderate, and hard at 49 FPS on a single consumer GPU, surpassing Complex-YOLO, with gains of +12.6%, +7.5%, and +3.1%. Qualitative scenes show stable detection under occlusion. The pipeline is compact and ready for real time robotic deployment. Our source code is publicly available on GitHub.

cs.CV↗

arXiv2026

Multi-Robot Coordination in V2X Environments

This paper presents a Vehicle-to-Everything (V2X) communication framework that enables decentralized cooperation among social robots operating in complex urban traffic environments. Building on ETSI Cooperative Awareness and Maneuver Coordination services, the framework introduces two robot-centric facility-layer services: the Robot Awareness Service (RAS) and the Robot Maneuver Coordination Service (RMCS), realized through the Robot Awareness Message (RAM) and the Robot Maneuver Coordination Message (RMCM), respectively. RAS enables role-aware, task-oriented robot awareness while integrating externally detected Vulnerable Road Users (VRUs), including non-V2X pedestrians, into cooperative awareness. RMCS supports event-driven, low-latency coordination of robot maneuvers under explicitly established roles, without centralized infrastructure or prior pairing. A real-world proof of concept demonstrates deterministic multi-robot coordination between a humanoid robot and a quadrupedal robot assisting a pedestrian during a road-crossing scenario, governed by a formally specified finite-state coordination model. Complementary simulations evaluate robot-mediated VRU clustering in mixed V2X environments, showing that RAS-based clustering integrates non-V2X VRUs in safety-critical areas while reducing redundant transmissions from V2X-enabled VRUs, thereby lowering channel load. Together, the proposed services provide a scalable and standards-aligned foundation for integrating cooperative robots into future Connected, Cooperative, and Automated Mobility ecosystems.

cs.RO↗

arXiv2026

Performance Evaluation of V2X Communication Using Large-Scale Traffic Data

Vehicular communication (V2X) technologies are widely regarded as a cornerstone for cooperative and automated driving, yet their large-scale real-world deployment remains limited. As a result, understanding V2X performance under realistic, full-scale traffic conditions continues to be relevant. Most existing performance evaluations rely on synthetic traffic scenarios generated by simulators, which, while useful, may not fully capture the features of real-world traffic. In this paper, we present a large-scale, data-driven evaluation of V2X communication performance using real-world traffic datasets. Vehicle trajectories derived from the Highway Drone (HighD) and Intersection Drone (InD) datasets are converted into simulation-ready formats and coupled with a standardized V2X networking stack to enable message-level performance analysis for entire traffic populations comprising over hundred thousands vehicles across multiple locations. We evaluate key V2X performance indicators, including inter-generation gap, inter-packet gap, packet delivery ratio, and channel busy ratio, across both highway and urban intersection environments. Our results show that cooperative awareness services remain feasible at scale under realistic traffic conditions. In addition, the findings highlight how traffic density, mobility patterns, and communication range influence V2X performance and how synthetic traffic assumptions may overestimate channel congestion.

cs.NI↗

arXiv2026

Li-ViP3D++: Query-Gated Deformable Camera-LiDAR Fusion for End-to-End Perception and Trajectory Prediction

End-to-end perception and trajectory prediction from raw sensor data is one of the key capabilities for autonomous driving. Modular pipelines restrict information flow and can amplify upstream errors. Recent query-based, fully differentiable perception-and-prediction (PnP) models mitigate these issues, yet the complementarity of cameras and LiDAR in the query-space has not been sufficiently explored. Models often rely on fusion schemes that introduce heuristic alignment and discrete selection steps which prevent full utilization of available information and can introduce unwanted bias. We propose Li-ViP3D++, a query-based multimodal PnP framework that introduces Query-Gated Deformable Fusion (QGDF) to integrate multi-view RGB and LiDAR in query space. QGDF (i) aggregates image evidence via masked attention across cameras and feature levels, (ii) extracts LiDAR context through fully differentiable BEV sampling with learned per-query offsets, and (iii) applies query-conditioned gating to adaptively weight visual and geometric cues per agent. The resulting architecture jointly optimizes detection, tracking, and multi-hypothesis trajectory forecasting in a single end-to-end model. On nuScenes, Li-ViP3D++ improves end-to-end behavior and detection quality, achieving higher EPA (0.335) and mAP (0.502) while substantially reducing false positives (FP ratio 0.147), and it is faster than the prior Li-ViP3D variant (139.82 ms vs. 145.91 ms). These results indicate that query-space, fully differentiable camera-LiDAR fusion can increase robustness of end-to-end PnP without sacrificing deployability.

cs.CV↗

arXiv2025

ROBOPOL: Social Robotics Meets Vehicular Communications for Cooperative Automated Driving

On the way toward full autonomy, sharing roads between automated and autonomous vehicles in so-called mixed traffic is unavoidable. Moreover, even if all vehicles on the road were autonomous, pedestrians would still cross streets. We propose social robots as moderators between autonomous vehicles and vulnerable road users. This paper presents a first proof-of-concept integration of a social robot advising pedestrians in crossing scenarios involving a cooperative automated vehicle. We also discuss key enablers required for designing "robot policeman" in a generic use case of cooperative intersection management. Our work provides a vision of the role of social robotics in future Cooperative Intelligent Transport Systems.

cs.RO↗

arXiv2025

VALISENS: A Validated Innovative Multi-Sensor System for Cooperative Automated Driving

Reliable perception remains a key challenge for Connected Automated Vehicles (CAVs) in complex real-world environments, where varying lighting conditions and adverse weather degrade sensing performance. While existing multi-sensor solutions improve local robustness, they remain constrained by limited sensing range, line-of-sight occlusions, and sensor failures on individual vehicles. This paper introduces VALISENS, a validated cooperative perception system that extends multi-sensor fusion beyond a single vehicle through Vehicle-to-Everything (V2X)-enabled collaboration between Connected Automated Vehicles (CAVs) and intelligent infrastructure. VALISENS integrates onboard and roadside LiDARs, radars, RGB cameras, and thermal cameras within a unified multi-agent perception framework. Thermal cameras enhances the detection of Vulnerable Road Users (VRUs) under challenging lighting conditions, while roadside sensors reduce occlusions and expand the effective perception range. In addition, an integrated sensor monitoring module continuously assesses sensor health and detects anomalies before system degradation occurs. The proposed system is implemented and evaluated in a dedicated real-world testbed. Experimental results show that VALISENS improves pedestrian situational awareness by up to 18% compared with vehicle-only sensing, while the sensor monitoring module achieves over 97% accuracy, demonstrating its effectiveness and its potential to support future Cooperative Intelligent Transport Systems (C-ITS) applications.

cs.RO↗

arXiv2025

Systematic Literature Review on Vehicular Collaborative Perception -- A Computer Vision Perspective

The effectiveness of autonomous vehicles relies on reliable perception capabilities. Despite significant advancements in artificial intelligence and sensor fusion technologies, current single-vehicle perception systems continue to encounter limitations, notably visual occlusions and limited long-range detection capabilities. Collaborative Perception (CP), enabled by Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) communication, has emerged as a promising solution to mitigate these issues and enhance the reliability of autonomous systems. Beyond advancements in communication, the computer vision community is increasingly focusing on improving vehicular perception through collaborative approaches. However, a systematic literature review that thoroughly examines existing work and reduces subjective bias is still lacking. Such a systematic approach helps identify research gaps, recognize common trends across studies, and inform future research directions. In response, this study follows the PRISMA 2020 guidelines and includes 106 peer-reviewed articles. These publications are analyzed based on modalities, collaboration schemes, and key perception tasks. Through a comparative analysis, this review illustrates how different methods address practical issues such as pose errors, temporal latency, communication constraints, domain shifts, heterogeneity, and adversarial attacks. Furthermore, it critically examines evaluation methodologies, highlighting a misalignment between current metrics and CP's fundamental objectives. By delving into all relevant topics in-depth, this review offers valuable insights into challenges, opportunities, and risks, serving as a reference for advancing research in vehicular collaborative perception.

cs.CV↗

arXiv2025

Magic in Human-Robot Interaction (HRI)

"Magic" is referred to here and there in the robotics literature, from "magical moments" afforded by a mobile bubble machine, to "spells" intended to entertain and motivate children--but what exactly could this concept mean for designers? Here, we present (1) some theoretical discussion on how magic could inform interaction designs based on reviewing the literature, followed by (2) a practical description of using such ideas to develop a simplified prototype, which received an award in an international robot magic competition. Although this topic can be considered unusual and some negative connotations exist (e.g., unrealistic thinking can be referred to as magical), our results seem to suggest that magic, in the experiential, supernatural, and illusory senses of the term, could be useful to consider in various robot design contexts, also for artifacts like home assistants and autonomous vehicles--thus, inviting further discussion and exploration.

cs.RO↗

arXiv2025

Non-Negotiated Implicit ETSI VAM Clustering

Including Vulnerable Road User (VRU) in Cooperative Intelligent Transport Systems (C-ITS) framework aims to increase road safety. However, this approach implies a massive increase of network nodes and thus is vulnerable to medium capacity issues, e.g., contention, congestion, resource scheduling. Implementing cluster schemes -- to reduce the number of nodes but represent the same number of VRUs -- is a direct way to address the issue. One of them is suggested by European Telecommunications Standards Institute (ETSI) and consists of nodes (connected pedestrians and cyclists) sending vicarious messages to enable a leader node to cover for a cluster of VRUs. However, the proposed scheme includes negotiation to establish a cluster, and in-cluster communication to maintain it, requiring extra messages of variable sizes and thus does not fully resolve the original medium capacity issues. Furthermore, these exchanges assume network reliability (i.e. a lossless channel and low latency to meet time constraints). We propose a method for VRU Awareness Message (VAM) clustering where 1) all cluster operations are performed without negotiation, 2) cluster leaders do not require sending additional messages or meet deadlines, and 3) assumes a lossy communication channel and offers a mechanism for cluster resilience. Our results show the feasibility of the concept by halving message generations compared to individual messages while keeping the awareness levels (i.e., that VRUs are accounted for).

cs.NI↗

arXiv2025

The Components of Collaborative Joint Perception and Prediction -- A Conceptual Framework

Connected Autonomous Vehicles (CAVs) benefit from Vehicle-to-Everything (V2X) communication, which enables the exchange of sensor data to achieve Collaborative Perception (CP). To reduce cumulative errors in perception modules and mitigate the visual occlusion, this paper introduces a new task, Collaborative Joint Perception and Prediction (Co-P&P), and provides a conceptual framework for its implementation to improve motion prediction of surrounding objects, thereby enhancing vehicle awareness in complex traffic scenarios. The framework consists of two decoupled core modules, Collaborative Scene Completion (CSC) and Joint Perception and Prediction (P&P) module, which simplify practical deployment and enhance scalability. Additionally, we outline the challenges in Co-P&P and discuss future directions for this research area.

cs.CV↗

arXiv2023

Protection of Vulnerable Road Users using Hybrid Vehicular Networks

The use of reactive detection technologies such as passive and active sensors for avoiding car accidents involving pedestrians and other Vulnerable Road Users (VRU) is one of the cornerstones of Cooperative, Connected, and Automated Mobility (CCAM). However, CCAM systems are not yet present in all roads at all times. The use of currently available technologies that are embedded in smartphones, such as location services and Internet access, are enablers for the early detection of VRUs. This paper presents the proof-of-concept of a system that provides vehicles with enough information about the presence of VRUs by using public cellular networks, an MQTT broker, and IEEE 802.11p-enabled hardware (a roadside unit and an on-board unit). The system was tested in an urban environment and in a test track, where its feasibility was evaluated. Results were satisfactory, proving the system is reliable enough to alert of the sudden appearance of a VRU in time for the driver to react.

cs.NI↗

arXiv2023

Towards Cooperative VRUs: Optimal Positioning Sampling for Pedestrian Awareness Messages

Road safety is the main motivation for Cooperative Intelligent Transport Systems (C-ITS) in general, and vehicular communications (V2X) technology in particular. The V2X-based Vulnerable Road User (VRU) protection is an approach that relies on the persistent broadcasting of "beacon" awareness messages by a VRU mobile device. To this end the European Telecommunications Standards Institute (ETSI) has specified the Vulnerable Road User Awareness Message (VAM) as well as the overall ITS-G5 protocol stack enabling a variety of the V2X applications. This article studies how often pedestrians (a type of VRU) should check their position to issue a VAM. To that end, we characterize the rate at which pedestrians generate VAMs leveraging a recognized mobility model, and formulate an optimization problem to minimize the time elapsed between VAMs. We propose an algorithm to solve the problem in 802.11p and assess its accuracy through numerical and simulation campaigns. Results evidence the accuracy of our VAM rate characterization, and evidence that we decrease ETSI positioning sampling rate by more than 30%. On top, our solution decreases the time between VAMs, and increases the packet delivery ratio. In other words, our approach increases the pedestrians safety while reducing the battery consumption of mobile devices.

cs.NI↗

arXiv2021

"Robot Steganography"?: Opportunities and Challenges

Robots are being designed to communicate with people in various public and domestic venues in a helpful, discreet way. Here, we use a speculative approach to shine light on a new concept of robot steganography (RS), that a robot could seek to help vulnerable populations by discreetly warning of potential threats. We first identify some potentially useful scenarios for RS related to safety and security -- concerns that are estimated to cost the world trillions of dollars each year -- with a focus on two kinds of robots, an autonomous vehicle (AV) and a socially assistive humanoid robot (SAR). Next, we propose that existing, powerful, computer-based steganography (CS) approaches can be adopted with little effort in new contexts (SARs), while also pointing out potential benefits of human-like steganography (HS): although less efficient and robust than CS, HS represents a currently-unused form of RS that could also be used to avoid requiring computers or detection by more technically advanced adversaries. This analysis also introduces some unique challenges of RS that arise from message generation, indirect perception, and effects of perspective. For this, we explore some related theoretical and practical concerns for selecting carrier signals and generating messages, also making available some code and a video demo. Finally, we report on checking the current feasibility of the RS concept via a simplified user study, confirming that messages can be hidden in a robot's behaviors. The immediate implication is that RS could help to improve people's lives and mitigate some costly problems -- suggesting the usefulness of further discussion, ideation, and consideration by designers.

cs.RO↗

arXiv2013

Evaluating IEEE 802.15.4 for Cyber-Physical Systems

With rapid advancements in sensing, networking, and computing technologies, recent years have witnessed the emergence of cyber-physical systems (CPS) in a broad range of application domains. CPS is a new class of engineered systems that features the integration of computation, communications, and control. In contrast to general-purpose computing systems, many cyber-physical applications are safety-cricial. These applications impose considerable requirements on quality of service (QoS) of the employed networking infrastruture. Since IEEE 802.15.4 has been widely considered as a suitable protocol for CPS over wireless sensor and actuator networks, it is of vital importance to evaluate its performance extensively. Serving for this purpose, this paper will analyze the performance of IEEE 802.15.4 standard operating in different modes respectively. Extensive simulations have been conducted to examine how network QoS will be impacted by some critical parameters. The results are presented and analyzed, which provide some useful insights for network parameter configuration and optimization for CPS design.

cs.NI↗