arXiv subjects

Alexis Duchesne

Publications and source records attributed to Alexis Duchesne.

10 recordsLinked to original sources

arXiv2025

Orbiting, colliding and merging droplets on a soap film: toward gravitational analogues

Modern telescopes provide breathtaking images of nebulae, clouds and galaxies shaped by gravity-driven interactions between complex bodies. While such structures are prevalent on an astrophysical scale, they are rarely observed at the human scale. In this letter, we report the observations of the complex orbits, collision, and coalescence of droplets on a soap film, forming structures such as bridges and spiral arms, reminiscent of their astrophysical counterparts. These dynamics emerge from attractive forces caused by gravito-capillary-driven distortions of the supporting soap film. Long orbits and intricate coalescence mechanisms are enabled by the small dissipation in the soap film and the fluidic nature of the droplets and supporting film, respectively. The existence of stable droplets within the soap film featuring a universal radius, as well as the attractive potentials, are explained through a careful comparison of experimental data with models computing the distortions of the supporting soap film. This work opens perspectives to

physics.flu-dyn↗

arXiv2024

Vertical impact of a water jet on a hot plate from a growing drop to spray formation

In this article, we experimentally investigate the impact of a submillimetric water jet on a horizontal surface heated well above the "static" Leidenfrost temperature of water. We observe the transition from a regime where a single drop grows at the impingement point to a regime of spray formation. The main control parameter appears to be the jet Weber number ($\We$). The first regime persists until $\We \lesssim 30$ whereas the spray formation occurs for $\We \gtrsim 40$. Surprisingly, we found no influence of the hot plate's temperature on the reported phenomena. We particularly focus on the second regime, where the liquid jet spreads on the plate, forming a liquid sheet that eventually lifts off and breaks into droplets. We characterized this regime by the radius $r_c$ of the liquid sheet when it is still in contact with the plate and the angle of ejection $\theta$ of the droplets. We further examine the ejected droplets by characterizing their speed and sizes. Simple models are proposed to predict the dependencies and order of magnitudes of $r_c$ and $\theta$. We also aim to predict the critical Weber number at which the transition between the two regimes occurs. Our models show reasonable agreement with our experimental data. Finally, we compare the energy transferred from the jet to the droplets with results reported in the literature for impacts on unheated surfaces, finding a difference of nearly a factor 2.

physics.flu-dyn↗

arXiv2022

Bubbles and liquid films resisting drainage, evaporation and nuclei-induced bursting

Soap bubbles are by essence fragile and ephemeral. Depending on their composition and environment, bubble bursting can be triggered by gravity-induced drainage and/or the evaporation of the liquid and/or the presence of nuclei. They can also shrink due to the diffusion of the inner gas in the outside atmosphere induced by Laplace overpressure. In this paper, we design bubbles made of a composite liquid film able to neutralize all these effects and keep their integrity for more than one year in a standard atmosphere. The unique properties of this composite film are rationalized with a nonlinear model and used to design complex objects.

cond-mat.soft↗

arXiv2021

Circular hydraulic jumps: where does surface tension matter?

Recently, an unusual scaling law has been observed in circular hydraulic jumps and has been attributed to a supposed missing term in the local energy balance of the flow [\cite{bhagat_2018}]. In this paper, we show that - though the experimental observation is valuable and interesting - this interpretation is presumably not the good one. When transposed to the case of a axial sheet formed by two impinging liquid jets, the assumed principle leads in fact to a velocity distribution in contradiction with the present knowledge for this kind of flows. We show here how to correct this approach by keeping consistency with surface tension thermodynamics: for Savart-Taylor sheets, when adequately corrected, we recover the well known $1/r$ liquid thickness with a constant and uniform velocity dictated by Bernoulli's principle. In the case of circular hydraulic jumps, we propose here a simple approach based on Watson description of the flow in the central region [\cite{Watson_JFM}]], combined with appropriate boundary conditions on the formed circular front. Depending on the specific condition, we find in turn the new scaling by \cite{bhagat_2018} and the more conventional scaling law found long ago by \cite{Bohr_1993}. We clarify here a few situations in which one should hold rather than the other, hoping to reconcile Bhagat et al. observations with the present knowledge of circular hydraulic jump modeling. However, the question of a possible critical Froude number imposed at the jump exit and dictating logarithmic corrections to scaling remains an opened and unsolved question.

physics.flu-dyn↗

arXiv2020

The motion of long levitating drops in tubes in an anti-Bretherton configuration

In his seminal paper, Bretherton [J. Fluid Mech., 10:166 (1961)] studied the motion of long bubbles in capillary tubes, a situation encountered in many two-phase flow systems. Here, we unveil experimentally and numerically the negative configuration, wherein a long liquid drop formed by the rupture of a liquid plug is stably transported in a capillary tube and surrounded by a flow-induced air cushion. After a careful theoretical and numerical analysis of the drop formation process, we show that the shape of the drop and lubricating air film is reminiscent of Bretherthon's calculation and can be inferred from an adapted analytical theory. This work opens tremendous perspectives for drop fast transport in microfluidic systems without walls contamination and friction.

physics.flu-dyn↗

arXiv2019

Surface tension and the origin of the circular hydraulic jump in a thin liquid film

It was recently claimed by Bhagat et al. (J. Fluid Mech. vol. 851 (2018), R5) that the scientific literature on the circular hydraulic jump in a thin liquid film is flawed by improper treatment and severe underestimation of the influence of surface tension. Bhagat {\em et al.} use an energy equation with a new surface energy term that is introduced without reference, and they conclude that the location of the hydraulic jump is determined by surface tension alone. We show that this approach is incorrect and derive a corrected energy equation. Proper treatment of surface tension in thin film flows is of general interest beyond hydraulic jumps, and we show that the effect of surface tension is fully contained in the Laplace pressure due to the curvature of the surface. Following the same approach as Bhagat et al., i.e., keeping only the first derivative of the surface velocity, the influence of surface tension is, for thin films, much smaller than claimed by them. We further describe the influence of viscosity in thin film flows, and we conclude by discussing the distinction between time-dependent and stationary hydraulic jumps.

physics.flu-dyn↗

arXiv2017

Walks of bubbles on a hot wire in a liquid bath

When a horizontal resistive wire is heated up to the boiling point in a subcooled liquid bath, some vapor bubbles nucleate on its surface. Traditional nucleate boiling theory predicts that bubbles generated from active nucleate sites, grow up and depart from the heating surface due to buoyancy and inertia. However, we observed here a different behavior: the bubbles slide along the heated wire. In this situation, unexpected regimes are observed; from the simple sliding motion to bubble clustering. We noticed that bubbles could rapidly change their moving direction and may also interact. Finally, we propose an interpretation for both the attraction between the bubbles and the wire and for the motion of the bubbles on the wire in term of Marangoni effects.

physics.flu-dyn↗

arXiv2016

Leidenfrost drops on a heated liquid pool

We show that a volatile liquid drop placed at the surface of a non-volatile liquid pool warmer than the boiling point of the drop can experience a Leidenfrost effect even for vanishingly small superheats. Such an observation points to the importance of the substrate roughness, negligible in the case considered here, in determining the threshold Leidenfrost temperature. A theoretical model based on the one proposed by Sobac et al. [Phys. Rev. E 90, 053011 (2014)] is developed in order to rationalize the experimental data. The shapes of the drop and of the substrate are analyzed. The model notably provides scalings for the vapor film thickness. For small drops, these scalings appear to be identical to the case of a Leidenfrost drop on a solid substrate. For large drops, in contrast, they are different and no evidence of chimney formation has been observed either experimentally or theoretically in the range of drop sizes considered in this study. Concerning the evaporation dynamics, the radius is shown to decrease linearly with time whatever the drop size, which differs from the case of a Leidenfrost drop on a solid substrate. For high superheats, the characteristic lifetime of the drops versus the superheat follows a scaling law that is derived from the model but, at low superheats, it deviates from this scaling by rather saturating.

physics.flu-dyn↗

arXiv2014

Constant Froude number in a circular hydraulic jump and its implication on the jump radius selection

The properties of a standard hydraulic jump depend critically on a Froude number Fr defined as the ratio of the flow velocity to the gravity waves speed. In the case of a horizontal circular jump, the question of the Froude number is not well documented. Our experiments show that Fr measured just after the jump is locked on a constant value that does not depend on flow rate Q, kinematic viscosity ν and surface tension γ. Combining this result to a lubrication description of the outer flow yields, under appropriate conditions, a new and simple law ruling the jump radius RJ : $R_J (ln (\frac{R_\infty}{R_J}))^{3/8} \sim Q^{5/8}ν^{-3/8}$, in excellent agreement with our experimental data. This unexpected RJ result asks an unsolved question to all available models.

physics.flu-dyn↗

arXiv2013

Orbits and reversals of a drop rolling inside a horizontal circular hydraulic jump

We explore the complex dynamics of a non-coalescing drop of moderate size inside a circular hydraulic jump of the same liquid formed on a horizontal disk. In this situation the drop is moving along the jump and one observes two different motions: a periodic one (it orbitates at constant speed) and an irregular one involving reversals of the orbital motion. Modeling the drop as a rigid sphere exchanging friction with liquid across a thin film of air, we recover the orbital motion and the internal rotation of the drop. This internal rotation is experimentally observed.

physics.flu-dyn↗