arXiv subjects

Alexis Hill

Publications and source records attributed to Alexis Hill.

16 recordsLinked to original sources

arXiv2024

The Science Performance of the Gemini High Resolution Optical Spectrograph

The Gemini High Resolution Optical Spectrograph (GHOST) is a fiber-fed spectrograph system on the Gemini South telescope that provides simultaneous wavelength coverage from 348 - 1061nm, and designed for optimal performance between 363 - 950nm. It can observe up to two objects simultaneously in a 7.5 arcmin diameter field of regard at R = 56,000 or a single object at R = 75,000. The spectral resolution modes are obtained by using integral field units to image slice a 1.2" aperture by a factor of five in width using 19 fibers in the high resolution mode and by a factor of three in width using 7 fibers in the standard resolution mode. GHOST is equipped with hardware to allow for precision radial velocity measurements, expected to approach meters per second precision. Here, we describe the basic design and operational capabilities of GHOST, and proceed to derive and quantify the key aspects of its on-sky performance that are of most relevance to its science users.

astro-ph.IM↗

arXiv2023

GHOST Commissioning Science Results: Identifying a new chemically peculiar star in Reticulum II

The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high resolution spectrograph to be developed for a large aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, along with two stars in the ultra faint dwarf galaxy, Ret II, one of which was previously identified as a candidate member, but did not have a previous detailed chemical abundance analysis. This star (GDR3 0928) is found to be a bona fide member of Ret II, and from a spectral synthesis analysis, it is also revealed to be a CEMP-r star, with significant enhancements in the several light elements (C, N, O, Na, Mg, and Si), in addition to featuring an r-process enhancement like many other Ret II stars. The light-element enhancements in this star resemble the abundance patterns seen in the CEMP-no stars of other ultra faint dwarf galaxies, and are thought to have been produced by an independent source from the r-process. These unusual abundance patterns are thought to be produced by faint supernovae, which may be produced by some of the earliest generations of stars.

astro-ph.GA↗

arXiv2019

The Maunakea Spectroscopic Explorer

The Maunakea Spectroscopic Explorer is a next-generation massively multiplexed spectroscopic facility currently under development in Hawaii. It is completely dedicated to large-scale spectroscopic surveys and will enable transformative science. In this white paper we summarize the science case and describe the current state of the project.

astro-ph.IM↗

arXiv2018

The Maunakea Spectroscopic Explorer Book 2018

(Abridged) This is the Maunakea Spectroscopic Explorer 2018 book. It is intended as a concise reference guide to all aspects of the scientific and technical design of MSE, for the international astronomy and engineering communities, and related agencies. The current version is a status report of MSE's science goals and their practical implementation, following the System Conceptual Design Review, held in January 2018. MSE is a planned 10-m class, wide-field, optical and near-infrared facility, designed to enable transformative science, while filling a critical missing gap in the emerging international network of large-scale astronomical facilities. MSE is completely dedicated to multi-object spectroscopy of samples of between thousands and millions of astrophysical objects. It will lead the world in this arena, due to its unique design capabilities: it will boast a large (11.25 m) aperture and wide (1.52 sq. degree) field of view; it will have the capabilities to observe at a wide range of spectral resolutions, from R2500 to R40,000, with massive multiplexing (4332 spectra per exposure, with all spectral resolutions available at all times), and an on-target observing efficiency of more than 80%. MSE will unveil the composition and dynamics of the faint Universe and is designed to excel at precision studies of faint astrophysical phenomena. It will also provide critical follow-up for multi-wavelength imaging surveys, such as those of the Large Synoptic Survey Telescope, Gaia, Euclid, the Wide Field Infrared Survey Telescope, the Square Kilometre Array, and the Next Generation Very Large Array.

astro-ph.IM↗

arXiv2018

Maunakea Spectroscopic Explorer Advancing from Conceptual Design

The Maunakea Spectroscopic Explorer (MSE) project has completed its Conceptual Design Phase. This paper is a status report of the MSE project regarding its technical and programmatic progress. The technical status includes its conceptual design and system performance, and highlights findings and recommendations from the System and various subsystems design reviews. The programmatic status includes the project organization and management plan for the Preliminary Design Phase. In addition, this paper provides the latest information related to the permitting process for Maunakea construction.

astro-ph.IM↗

arXiv2018

Maunakea Spectroscopic Explorer (MSE) Instrumentation Suite

The Maunakea Spectroscopic Explorer (MSE) is replacement of the existing 3.6-m Canada France Hawaii Telescope into a dedicated wide field highly multiplexed fiber fed spectroscopic facility. MSE is capable of observing over four thousand science targets simultaneously in two resolution modes. The paper describes the unique instrument system capabilities and its components starting from the telescope prime focus and ending at the spectrograph suite. The instrument system components have completed their conceptual designs and they include a Sphinx positioner system, fiber transmission system, low/moderate resolution and high resolution spectrographs and a calibration system. These components will be procured separately and the Project is responsible for their integration and the overall system performance afterward. The paper describes from a system perspective the specific design and interface constraints imposed on the components given the extra interface and integration considerations.

astro-ph.IM↗

arXiv2018

Optimal scheduling and science delivery of spectra for millions of targets in thousands of fields: the operational concept of the Maunakea spectroscopic explorer (MSE)

The Maunakea Spectroscopic Explorer (MSE) will each year obtain millions of spectra in the optical to near-infrared, at low (R~3000) to high (R~40000) spectral resolution by observing >3000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. The architecture of MSE is an assembly of subsystems designed to meet the science requirements and describes what MSE will look like. In this paper we focus on the operations concept of MSE, which describes how to operate a fiber fed, highly multiplexed, dedicated observatory given its architecture and the science requirements. The operations concept details the phases of operations, from selecting proposals within the science community to distributing back millions of spectra to this community. For each phase, the operations concept describes the tools required to support the science community in their analyses and the operations staff in their work. It also highlights the specific needs related to the complexity of MSE with millions of targets to observe, thousands of fibers to position, and different spectral resolution to use. Finally, the operations concept shows how the science requirements on calibration and observing efficiency can be met.

astro-ph.IM↗

arXiv2018

Maximising the sensitivity of next generation multi-object spectroscopy: system budget development and design optimizations for the Maunakea Spectroscopic Explorer

MSE is an 11.25m telescope with a 1.5 sq.deg. field of view. It can simultaneously obtain 3249 spectra at R=3000 from 360-1800nm, and 1083 spectra at R=40000 in the optical. Absolutely critical to the scientific success of MSE is to efficiently access the faint Universe. Here, we describe the adopted systems engineering methodology to ensure MSE meets the challenging sensitivity requirements, and how these requirements are partitioned across three budgets, relating to the throughput, noise and fiber injection efficiency. We then describe how the sensitivity of MSE as a system was estimated at the end of Conceptual Design Phase, and how this information was used to revisit the system design in order to meet the sensitivity requirements while maintaining the overall architectural concept of the Observatory. Finally, we present the anticipated sensitivity performance of MSE and describe the key science that these capabilities will enable.

astro-ph.IM↗

arXiv2018

Maunakea Spectroscopic Explorer (MSE): Implementing systems engineering methodology for the development of a new facility

Maunakea Spectroscopic Explorer will be a 10-m class highly multiplexed survey telescope, including a segmented primary mirror and robotic fiber positioners at the prime focus. MSE will replace the Canada France Hawaii Telescope (CFHT) on the summit of Mauna Kea, Hawaii. The multiplexing includes an array of over four thousand fibres feeding banks of spectrographs several tens of meters away. We present an overview of the requirements flow-down for MSE, from Science Requirements Document to Observatory Requirements Document. We have developed the system performance budgets, along with updating the budget architecture of our evolving project. We have also identified the links between subsystems and system budgets (and subsequently science requirements) and included system budget that are unique to MSE as a fiber-fed facility. All of this has led to a set of Observatory Requirements that is fully consistent with the Science Requirements.

astro-ph.IM↗

arXiv2018

The science calibration challenges of next generation highly multiplexed optical spectroscopy: the case of the Maunakea Spectroscopic Explorer

MSE is an 11.25m telescope with a 1.5 sq.deg. field of view. It can simultaneously obtain 3249 spectra at R=3000 from 360-1800nm, and 1083 spectra at R=40000 in the optical. The large field of view, large number of targets, as well as the use of more than 4000 optical fibres to transport the light from the focal plane to the spectrographs, means that precise and accurate science calibration is difficult but essential to obtaining the science goals. As a large aperture telescope focusing on the faint Universe, precision sky subtraction and spectrophotometry are especially important. Here, we discuss the science calibration requirements, and the adopted calibration strategy, including operational features and hardware, that will enable the successful scientific exploitation of the vast MSE dataset.

astro-ph.IM↗

arXiv2018

Expected observing efficiency of the Maunakea Spectroscopic Explorer (MSE)

The Maunakea Spectroscopic Explorer (MSE) will obtain millions of spectra each year in the optical to near-infrared, at low (R ~ 3,000) to high (R ~ 40,000) spectral resolution by observing >4,000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. One key metric of the success of MSE will be its survey speed, i.e. how many spectra of good signal-to-noise ratio will MSE be able to obtain every night and every year. This is defined at the higher level by the observing efficiency of the observatory and should be at least 80%, as indicated in the Science Requirements. In this paper we present the observing efficiency budget developed for MSE based on historical data at the Canada-France-Hawaii Telescope and other Maunakea Observatories. We describe the typical sequence of events at night to help us compute the observing efficiency and how we envision to optimize it to meet the science requirements.

astro-ph.IM↗

arXiv2018

Modeling and budgeting fiber injection efficiency for the Maunakea spectroscopic explorer (MSE)

The Maunakea Spectroscopic Explorer (MSE) will each year obtain millions of spectra in the optical to near-infrared, at low (R ~ 3,000) to high (R ~ 40,000) spectral resolution by observing >4,000 spectra per pointing via a highly multiplexed fiber-fed system. Key science programs for MSE include black hole reverberation mapping, stellar population analysis of faint galaxies at high redshift, and sub-km/s velocity accuracy for stellar astrophysics. One key metric of the success of MSE will be its survey speed, i.e. how many spectra of good signal-to-noise ratio will MSE be able to obtain every night and every year. The survey speed is directly linked to the allocation efficiency - how many fibers in the focal surface can be allocated to targets - and to the injection efficiency - what fraction of light from a target can enter the fiber at the focal surface. In this paper we focus on the injection efficiency and how to optimize it to increase the signal-to-noise ratio of targets observed in sky dominated conditions. The injection efficiency depends on the size of the fiber and requires highly precise, repeatable and stable positioning of the fiber in the focal surface. We present the allocation budget used for Conceptual Design Review and the modeling that allows to estimate the injection efficiency, which is just one part necessary to meet the science requirements on sensitivities.

astro-ph.IM↗

arXiv2018

MSE FiTS: the ultimate multi-fiber optic transmission system

The Maunakea Spectroscopic Explorer (MSE) is a next-generation observatory, designed to provide highly multiplexed, multi-object spectroscopy over a wide field of view. The observatory will consist of (1) a telescope with an 11.25 m aperture, (2) a 1.5 square-degree science field of view, (3) fibre optic positioning and transmission systems, and (4) a suite of low (R=3000), moderate (R=6000) and high resolution (R=40,000) spectrographs. The Fibre Transmission System (FiTS) consists of 4332 optical fibres, designed to transmit the light from the telescope prime focus to the dedicated spectrographs. The ambitious science goals of MSE require the Fibre Transmission System to deliver performance well beyond the current state of the art for multi-fibre systems, e.g., the sensitivity to observe magnitude 24 objects over a very broad wavelength range (0.37 - 1.8 microns) while achieving relative spectrophotometric accuracy of <3% and radial velocity precision of 20 km/s.

astro-ph.IM↗

arXiv2018

Transforming the Canada France Hawaii Telescope (CFHT) into the Maunakea Spectroscopic Explorer (MSE): A Conceptual Observatory Building and Facilities Design

The Canada France Hawaii Telescope Corporation (CFHT) plans to repurpose its observatory on the summit of Maunakea and operate a new wide field spectroscopic survey telescope, the Maunakea Spectroscopic Explorer (MSE). MSE will upgrade the observatory with a larger 11.25m aperture telescope and equip it with dedicated instrumentation to capitalize on the site, which has some of the best seeing in the northern hemisphere, and offer its user community the ability to do transformative science. The knowledge and experience of the current CFHT staff will contribute greatly to the engineering of this new facility. MSE will reuse the same building and telescope pier as CFHT. However, it will be necessary to upgrade the support pier to accommodate a bigger telescope and replace the current dome since a wider slit opening of 12.5 meters in diameter is needed. Once the project is completed the new facility will be almost indistinguishable on the outside from the current CFHT observatory. MSE will build upon CFHT's pioneering work in remote operations, with no staff at the observatory during the night, and use modern technologies to reduce daytime maintenance work. This paper describes the design approach for redeveloping the CFHT facility for MSE including the infrastructure and equipment considerations required to support and facilitate nighttime observations. The building will be designed so existing equipment and infrastructure can be reused wherever possible while meeting new requirement demands. Past experience and lessons learned will be used to create a modern, optimized, and logical layout of the facility. The purpose of this paper is to provide information to readers involved in the MSE project or organizations involved with the redevelopment of an existing observatory facility for a new mission.

astro-ph.IM↗

arXiv2018

Maunakea Spectroscopic Explorer (MSE) - The Prime Focus Subsystems: Requirements and Interfaces

MSE will be a massively multiplexed survey telescope, including a segmented primary mirror which feeds fibers at the prime focus, including an array of approximately four thousand fibers, positioned precisely to feed banks of spectrographs several tens of meters away. We describe the process of mapping top-level requirements on MSE to technical specifications for subsystems located at the MSE prime focus. This includes the overall top-level requirements based on knowledge of similar systems at other telescopes and how those requirements were converted into specifications so that the subsystems could begin working on their Conceptual Design Phases. We then discuss the verification of the engineering specifications and the compiling of lower-level requirements and specifications into higher level performance budgets (e.g. Image Quality). We also briefly discuss the interface specifications, their effect on the performance of the system and the plan to manage them going forward. We also discuss the opto-mechanical design of the telescope top end assembly and refer readers to more details for instrumentation located at the top end.

astro-ph.IM↗

arXiv2014

NFIRAOS First Facility AO System for the Thirty Meter Telescope

NFIRAOS, the Thirty Meter Telescope's first adaptive optics system is an order 60x60 Multi-Conjugate AO system with two deformable mirrors. Although most observing will use 6 laser guide stars, it also has an NGS-only mode. Uniquely, NFIRAOS is cooled to -30 C to reduce thermal background. NFIRAOS delivers a 2-arcminute beam to three client instruments, and relies on up to three IR WFSs in each instrument. We present recent work including: robust automated acquisition on these IR WFSs; trade-off studies for a common-size of deformable mirror; real-time computing architectures; simplified designs for high-order NGS-mode wavefront sensing; modest upgrade concepts for high-contrast imaging.

astro-ph.IM↗