Searcharxiv⌕ Search

arXiv subjects

Ali A. Esswie

Publications and source records attributed to Ali A. Esswie.

13 recordsLinked to original sources

Evolution of 3GPP Standards Towards True Extended Reality (XR) Support in 6G Networks

Extended reality (XR) is a key innovation of 5G-advanced and beyond networks. The diverse XR use-cases, including virtual reality, augmented reality, and mixed reality, transform the way humans interact with surrounding environments. Thus, XR technology enables true immersive experiences of novel services spanning, e.g., e-commerce, healthcare, and education, respectively. However, the efficient support of XR services over existing and future cellular systems is highly challenging and requires multiple radio design improvements, due to the unique XR traffic and performance characteristics. Thus, this article surveys the state-of-art 3GPP standardization activities (release-18) for integrating the XR service class into the 5G-advanced specifications, highlighting the major XR performance challenges. Furthermore, the paper introduces valuable insights and research directions for supporting true XR services over the next-generation 6G networks, where multiple novel radio design mindsets and protocol enhancements are proposed and evaluated using extensive system level simulations, including solutions for application-native dynamic performance reporting, traffic-dependent control channel design, collaborative device aggregation for XR capacity boosting and offload, respectively.

eess.SP↗

Power Saving Techniques in 3GPP 5G New Radio: A Comprehensive Latency and Reliability Analysis

Energy efficiency is critical for future sustainable cellular systems. Power saving optimization has been a key part of the fifth generation (5G) new radio specifications. For 5Gadvanced and future 6G, with the anticipation of a trillion internet of things (IoTs) devices with non-rechargeable or low-density batteries, device power efficiency is rather essential. There are numerous contributions from industry and academia which present the potential power saving gains of the various 5G power saving techniques; however, there is a lack of art on the performance cost paid to achieve such power saving gains. Therefore, this paper presents a comprehensive evaluation of the radio latency and reliability cost, which is lost due to a certain 5G new radio power saving feature. A thorough review of the state of-the-art 5G power saving techniques is introduced. Extensive system level simulations are performed to evaluate the latency and reliability cost of the considered power saving features. The paper offers valuable recommendations for supporting power efficient latency-critical traffic for beyond 5G-advanced systems.

eess.SP↗

Capacity Cost of Fulfilling the URLLC Performance in Industrial 5G New Radio Deployments

The development of the 5G new radio specifications has been derived by the the deterministic low latency use cases such as the ultra-reliable and low-latency communications (URLLC). A URLLC application requires a stringent radio latency and reliability performance, e.g., one-way radio latency of 1 ms with 99.999% success probability. Furthermore, there is a concurrent progressive demand for broadband capacity cellular applications, e.g., enhanced mobile broadband (eMBB) use-cases. The coexistence among the URLLC and eMBB service classes over a single radio spectrum is a challenging task since achieving the tight URLLC radio targets typically results in a capacity loss. Hence, it is vital for telecom operators to understand the capacity cost of fulling the various URLLC requirements in order to sufficiently plan the corresponding pricing models. Hence, in this work, a comprehensive analysis of the system capacity loss is presented to achieve the various requirements of the different URLLC use-cases. An extensive set of realistic system level simulations is performed and introduced where valuable insights and system design recommendations on the URLLC-eMBB quality of service coexistence are presented.

eess.SP↗

Analysis of Outage Latency and Throughput Performance in Industrial Factory 5G TDD Deployments

The fifth generation (5G) new radio supports a diversity of network deployments. The industrial factory (InF) wireless automation use cases are emerging and drawing an increasing attention of the 5G new radio standardization groups. Therefore, in this paper, we propose a service-aware time division duplexing (TDD) frame selection framework for multi-traffic deployments. We evaluate the performance of the InF network deployments with the state-of-the-art 3GPP modeling assumptions. In particular, we consider the dynamic TDD mode along with optimized uplink power control settings. Multi-traffic coexistence scenarios are also incorporated such that quality of service (QoS) aware dynamic user scheduling and TDD link selection are introduced. Extensive system level simulations are performed in order to evaluate the performance of the proposed solutions, where the proposed QoS-aware scheme shows 68% URLLC outage latency reduction compared to the QoS-unaware solutions. Finally, the paper offers insightful conclusions and design recommendations on the TDD radio frame selection, uplink power control settings and the best QoS-coexistence practices, in order to achieve a decent URLLC outage latency performance in the state-of-the-art InF deployments.

cs.NI↗

Semi-Static Radio Frame Configuration for URLLC Deployments in 5G Macro TDD Networks

Dynamic time division duplexing (TDD) is one of the major novelties of the 5G new radio standard. It notably improves the network resource utilization with sporadic directional packet arrivals. Although, the feasibility of the ultra-reliable and low-latency communications (URLLC) within such deployments is critically challenged, mainly due to the cross-link interference (CLI). In this work, we propose a semi-static and computationally-efficient TDD radio frame adaptation algorithm for 5G macro deployments. Particularly, we first identify the quasi-static variance of the cross-cell traffic buffering performance, with various CLI co-existence conditions. Accordingly, a common radio frame pattern is dynamically estimated based on the filtered multi-cell traffic statistics. Our system-level simulation results show that the proposed solution achieves a highly improved URLLC outage performance, i.e., offering 40% reduction gain of the achievable URLLC outage latency compared to perfect static-TDD, and approaching the optimal interference-free flexible-TDD case; though, with a significantly lower control overhead size.

eess.SP↗

Cross-Link Interference Suppression By Orthogonal Projector For 5G Dynamic TDD URLLC Systems

Dynamic time division duplexing (TDD) is envisioned as a vital transmission technology of the 5G new radio, due to its reciprocal propagation characteristics. However, the potential cross-link interference (CLI) imposes a fundamental limitation against the feasibility of the ultra-reliable and low latency communications (URLLC) in dynamic-TDD systems. In this work, we propose a near-optimal and complexity-efficient CLI suppression scheme using orthogonal spatial projection, while the signaling overhead is limited to B-bit, over the back-haul links. Compared to the state-of-the-art dynamic-TDD studies, proposed solution offers a significant improvement of the URLLC outage latency, e.g., -199% reduction, while boosting the achievable capacity per the URLLC packet by +156%.

eess.SP↗

On the Ultra-Reliable and Low-Latency Communications in Flexible TDD/FDD 5G Networks

The ultra-reliable and low-latency communication (URLLC) is the key driver of the current 5G new radio standardization. URLLC encompasses sporadic and small-payload transmissions that should be delivered within extremely tight radio latency and reliability bounds, i.e., a radio latency of 1 ms with 99.999% success probability. However, such URLLC targets are further challenging in the 5G dynamic time division duplexing (TDD) systems, due to the switching between the uplink and downlink transmission opportunities and the additional inter-cell cross-link interference (CLI). This paper presents a system level analysis of the URLLC outage performance within the 5G new radio flexible TDD systems. Specifically, we study the feasibility of the URLLC outage targets compared to the case with the 5G frequency division duplexing (FDD), and with numerous 5G design variants. The presented results therefore offer valuable observations on the URLLC outage performance in such deployments, and hence, introducing the state-of-the-art flexible-FDD technology.

eess.SP↗

Quasi-Dynamic Frame Coordination For Ultra- Reliability and Low-Latency in 5G TDD Systems

The fifth generation (5G) mobile technology features the ultra-reliable and low-latency communications (URLLC) as a major service class. URLLC applications demand a tight radio latency with extreme link reliability. In 5G dynamic time division duplexing (TDD) systems, URLLC requirements become further challenging to achieve due to the severe and fast-varying cross link interference (CLI) and the switching time of the radio frame configurations (RFCs). In this work, we propose a quasi-dynamic inter-cell frame coordination algorithm using hybrid frame design and a cyclic-offset-based RFC code-book. The proposed solution adaptively updates the RFCs in time such that both the average CLI and the user-centric radio latency are minimized. Compared to state-of-the-art dynamic TDD studies, the proposed scheme shows a significant improvement in the URLLC outage latency, i.e., 92% reduction gain, while boosting the cell-edge capacity by 189% and with a greatly reduced coordination overhead space, limited to B-bit.

eess.SP↗

Inter-Cell Radio Frame Coordination Scheme Based on Sliding Codebook for 5G TDD Systems

The fifth generation (5G) of the wireless communication networks supports wide diversity of service classes, leading to a highly dynamic uplink (UL) and downlink (DL) traffic asymmetry. Thus, dynamic time division duplexing (TDD) technology has become of a significant importance, due to its radio frame flexibility. However, fully dynamic TDD systems suffer from potentially severe inter-cell cross link interference (CLI). In this paper, we propose a novel inter-cell radio frame coordination (RFC) scheme based on sliding codebook for fully dynamic TDD 5G networks. Proposed coordination scheme simultaneously addresses two optimization objectives of minimizing the average CLI while reliably maximizing the achievable DL/UL capacity, by virtually extending the RFC degrees of freedom through a sliding phase-offset RFC codebook design. Compared to the state-of-the-art TDD studies, the proposed scheme shows significantly improved ergodic capacity, i.e., at least 40% gain under both the TCP and UDP protocols, and with much less signaling overhead, limited to B-bit. The paper offers valuable insights about how to most efficiently pre-mitigate potential CLI in Macro TDD systems.

eess.SP↗

Directional Spatial Channel Estimation For Massive FD-MIMO in Next Generation 5G Networks

Full-dimensional (FD) channel state information at transmitter (CSIT) has always been a major limitation of the spectral efficiency of cellular multi-input multi-output (MIMO) networks. This letter proposes an FD-directional spatial channel estimation algorithm for frequency division duplex massive FD-MIMO systems. The proposed algorithm uses the statistical spatial correlation between the uplink (UL) and downlink (DL) channels of each user equipment. It spatially decomposes the UL channel into azimuthal and elevation dimensions to estimate the array principal receive responses. An FD spatial rotation matrix is constructed to estimate the corresponding transmit responses of the DL channel, in terms of the frequency band gap between the UL and DL channels. The proposed algorithm shows significantly promising performance, approaching the ideal perfect-CSIT case without UL feedback overhead.

cs.IT↗

Multi-User Preemptive Scheduling for Critical Low Latency Communications in 5G Networks

5G new radio is envisioned to support three major service classes: enhanced mobile broadband (eMBB), ultra-reliable low-latency communications (URLLC), and massive machine type communications. Emerging URLLC services require up to one millisecond of communication latency with 99.999% success probability. Though, there is a fundamental trade-off between system spectral efficiency (SE) and achievable latency. This calls for novel scheduling protocols which cross-optimize system performance on user-centric; instead of network-centric basis. In this paper, we develop a joint multi-user preemptive scheduling strategy to simultaneously cross-optimize system SE and URLLC latency. At each scheduling opportunity, available URLLC traffic is always given higher priority. When sporadic URLLC traffic appears during a transmission time interval (TTI), proposed scheduler seeks for fitting the URLLC-eMBB traffic in a multi-user transmission. If the available spatial degrees of freedom are limited within a TTI, the URLLC traffic instantly overwrites part of the ongoing eMBB transmissions to satisfy the URLLC latency requirements, at the expense of minimal eMBB throughput loss. Extensive dynamic system level simulations show that proposed scheduler provides significant performance gain in terms of eMBB SE and URLLC latency.

eess.SP↗

Null Space Based Preemptive Scheduling For Joint URLLC and eMBB Traffic in 5G Networks

In this paper, we propose a null-space-based preemptive scheduling framework for cross-objective optimization to always guarantee robust URLLC performance, while extracting the maximum possible eMBB capacity. The proposed scheduler perpetually grants incoming URLLC traffic a higher priority for instant scheduling. In case that radio resources are not immediately schedulable, proposed scheduler forcibly enforces an artificial spatial user separation, for the URLLC traffic to get instantly scheduled over shared resources with ongoing eMBB transmissions. A pre-defined reference spatial subspace is constructed for which scheduler instantly picks the active eMBB user whose precoder is the closest possible. Then, it projects the eMBB precoder on-the-go onto the reference subspace, in order for its paired URLLC user to orient its decoder matrix into one possible null space of the reference subspace. Hence, a robust decoding ability is always preserved at the URLLC user, while cross-maximizing the ergodic capacity. Compared to the state-of-the-art proposals from industry and academia, proposed scheduler shows extreme URLLC latency robustness with significantly improved overall spectral efficiency. Analytical analysis and extensive system level simulations are presented to support paper conclusions.

eess.SP↗

Intra-Cluster Autonomous Coverage Optimization For Dense LTE-A Networks

Self Organizing Networks (SONs) are considered as vital deployments towards upcoming dense cellular networks. From a mobile carrier point of view, continuous coverage optimization is critical for better user perceptions. The majority of SON contributions introduce novel algorithms that optimize specific performance metrics. However, they require extensive processing delays and advanced knowledge of network statistics that may not be available. In this work, a progressive Autonomous Coverage Optimization (ACO) method combined with adaptive cell dimensioning is proposed. The proposed method emphasizes the fact that the effective cell coverage is a variant on actual user distributions. ACO algorithm builds a generic Space-Time virtual coverage map per cell to detect coverage holes in addition to limited or extended coverage conditions. Progressive levels of optimization are followed to timely resolve coverage issues with maintaining optimization stability. Proposed ACO is verified under both simulations and practical deployment in a pilot cluster for a worldwide mobile carrier. Key Performance Indicators show that proposed ACO method significantly enhances system coverage and performance.

cs.NI↗