arXiv subjects

Ali Ahmadi Dastjerdi

Publications and source records attributed to Ali Ahmadi Dastjerdi.

8 recordsLinked to original sources

arXiv2021

Frequency Domain Stability Method for Reset Systems

Today, linear PID controllers cannot satisfy requirements of high-precision industry due to the development of technology. According to the literature, reset controllers can overcome this important barrier. However, similar to other non-linear controllers, stability analysis for these controllers is complex and needs parametric models of the systems. Consequently, the applicability of these controllers may diminish in industry. The well-known Hb method is one of the solutions of this significant problem. Nevertheless, assessing the Hb condition in the frequency-domain is complex, particularly for high dimensional plants. Furthermore, it cannot assess UBIBS stability of reset control systems in the case of reseting to non-zero values. In this paper, the aforementioned problems have been solved for the first and second order reset elements and a frequency-domain approach for assessing stability of reset control systems is developed. Finally, some practical examples are presented to demonstrate the effectiveness of the proposed approach to use the frequency response measurement directly to assess the stability.

eess.SY↗

arXiv2020

Closed-Loop Frequency Analysis of Reset Control Systems

This paper introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic references are provided. It is then shown that, under specific conditions, such a steady-state response for periodic inputs is periodic with the same period as the input. Furthermore, a framework to obtain the steady-state response and to define a notion of closed-loop frequency response, including high order harmonics, is presented. Finally, pseudo-sensitivities for reset control systems are defined. These simplify the analysis of this class of systems and allow a direct software implementation of the analysis tool. To show the effectiveness of the proposed analysis method the position control problem for a precision positioning stage is studied. In particular, comparison with the results achieved using methods based on the Describing Function shows that the proposed method achieves superior closed-loop performance.

eess.SY↗

arXiv2020

Tuning of a Class of Reset Elements Using Pseudo-Sensitivities

Currently, the demand for a better alternative to linear PID controllers is increasing due to the rising expectations of the high-tech industry. In literature, it has been shown that Constant in gain Lead in phase (CgLp) compensators, which are a type of reset element, have high potential to improve the performance of systems. Although there are few works which investigate tuning of these compensators, the high order harmonics and steady-state performances have not yet been considered in these methods. Recently, a frequencydomain framework has been developed to analyze closed-loop performances of reset control systems which includes high order harmonics. In this paper, this frequency-domain framework is combined with loop-shaping constraints to provide a reliable frequency-domain tuning method for CgLp compensators. Finally, different performance metrics of a CgLp compensator are compared with those of a PID controller on a precision positioning stage. The results show that the presented tuning method is effective, and the system with the CgLp compensator achieves superior dynamic performance to that of the PID controller.

eess.SY↗

arXiv2020

Band-Passing Nonlinearity in Reset Elements

This paper addresses nonlinearity in reset elements and their effects. Reset elements are known for having less phase lag compared to their linear counterparts; however, they are nonlinear elements and produce higher-order harmonics. This paper investigates the higher-order harmonics for reset elements with one resetting state and proposes an architecture and a method of design which allows for band-passing the nonlinearity and its effects, namely, higher-order harmonics and phase advantage. The nonlinearity of reset elements is not entirely useful for all frequencies, e.g., they are useful for reducing phase lag at cross-over frequency region; however, higher-order harmonics can compromise tracking and disturbance rejection performance at lower frequencies. Using proposed "phase shaping" method, one can selectively suppress nonlinearity of a single-state reset element in a desired range of frequencies and allow the nonlinearity to provide its phase benefit in a different desired range of frequencies. This can be especially useful for the reset elements in the framework of "Constant in gain, Lead in phase" (CgLp) filter, which is a newly introduced nonlinear filter, bound to circumvent the well-known linear control limitation -- the waterbed effect.

eess.SY↗

arXiv2020

The optimal sequence for reset controllers

PID controllers cannot satisfy the high performance requirements since they are restricted by the water-bed effect. Thus, the need for a better alternative to linear PID controllers increases due to the rising demands of the high-tech industry. This has led many researchers to explore nonlinear controllers like reset control. Although reset controllers have been widely used to overcome the limitations of linear controllers in literature, the performance of the system varies depending on the relative sequence of controller linear and nonlinear parts. In this paper, the optimal sequence is found using high order sinusoidal input describing functions (HOSIDF). By arranging controller parts according to this strategy, better performance in the sense of precision and control input is achieved. The performance of the proposed sequence is validated on a precision positioning setup. The experimental results demonstrate that the optimal sequence found in theory outperforms other sequences.

eess.SY↗

arXiv2020

Tuning of CgLp based reset controllers: Application in precision positioning systems

This paper presents the tuning of a reset-based element called "Constant in gain and Lead in phase" (CgLp) in order to achieve desired precision performance in tracking and steady state. CgLp has been recently introduced to overcome the inherent linear control limitation - the waterbed effect. The analysis of reset controllers including ones based on CgLp is mainly carried out in the frequency domain using describing function with the assumption that the relatively large magnitude of the first harmonic provides a good approximation. While this is true for several cases, the existence of higher-order harmonics in the output of these elements complicates their analysis and tuning in the control design process for high precision motion applications, where they cannot be neglected. While some numerical observation-based approaches have been considered in literature for the tuning of CgLp elements, a systematic approach based on the analysis of higher-order harmonics is found to be lacking. This paper analyzes the CgLp behaviour from the perspective of first as well as higher-order harmonics and presents simple relations between the tuning parameters and the gain-phase behaviour of all the harmonics, which can be used for better tuning of these elements. The presented relations are used for tuning a controller for a high-precision positioning stage and results used for validation.

eess.SY↗

arXiv2020

A Frequency-Domain Stability Method for Reset Systems

Nowadays, the demand for an alternative to linear PID controllers has increased because of the rising expectations of the high-precision industry. The potential of reset controllers to solve this important challenge has been extensively demonstrated in the literature. However, similarly to other non-linear controllers, the stability analysis for these controllers is complex and relies on parametric models of the systems which may hinder the applicability of these controllers in industry. The well-known Hbeta method tries to solve this significant issue. However, assessing the H\b{eta} condition in the frequency-domain is complex, especially for high dimensional plants. In addition, it cannot be used to assess UBIBS stability of reset control systems in the case of reseting to non-zero values. These problems have been solved in this paper for the first order reset elements, and an easy-to-use frequency approach for assessing stability of reset control systems is proposed. The effectiveness of the proposed approach is demonstrated through a practical example.

eess.SY↗

arXiv2020

Benefiting from Linear Behaviour of a Nonlinear Reset-based Element at Certain Frequencies

This paper addresses a phenomenon caused by resetting only one of the two states of a so-called second order "Constant in gain Lead in phase" (CgLp) element. CgLp is a recently introduced reset-based nonlinear element, bound to circumvent the well-known linear control limitation -- the waterbed effect. The ideal behaviour of such a filter in the frequency domain is unity gain while providing a phase lead for a broad range of frequencies, which clearly violates the linear Bode's gain phase relationship. However, CgLp's ideal behaviour is based on a describing function, which is a first order approximation that neglects the effects of higher order harmonics in the output of the filter. Consequently, achieving the ideal behaviour is challenging when higher order harmonics are relatively large. It is shown in this paper that by resetting only one of the two states of a second order CgLp, the nonlinear filter will act as a linear one at a certain frequency, provided that some conditions are met. This phenomenon can be used to the benefit of reducing higher order harmonics of CgLp's output and achieving the ideal behaviour and thus better performance in terms of precision.

eess.SY↗