Searcharxiv⌕ Search

arXiv subjects

Ali Cagatay Cirik

Publications and source records attributed to Ali Cagatay Cirik.

3 recordsLinked to original sources

Quantization-Aided Secrecy: FD C-RAN Communications with Untrusted Radios

In this work, we study a full-duplex (FD) cloud radio access network (C-RAN) from the aspects of infrastructure sharing and information secrecy, where the central unit utilizes FD remote radio units (RU)s belonging to the same operator, i.e., the trusted RUs, as well as the RUs belonging to other operators or private owners, i.e., the untrusted RUs. Furthermore, the communication takes place in the presence of untrusted external receivers, i.e., eavesdropper nodes. The communicated uplink (UL) and downlink (DL) waveforms are quantized in order to comply with the limited capacity of the fronthaul links. In order to provide information secrecy, we propose a novel utilization of the quantization noise shaping in the DL, such that it is simultaneously used to comply with the limited capacity of the fronthaul links, as well as to degrade decoding capability of the individual eavesdropper and the untrusted RUs for both the UL and DL communications. In this regard, expressions describing the achievable secrecy rates are obtained. An optimization problem for jointly designing the DL and UL quantization and precoding strategies are then formulated, with the purpose of maximizing the overall system weighted sum secrecy rate. Due to the intractability of the formulated problem, an iterative solution is proposed, following the successive inner approximation and semi-definite relaxation frameworks, with convergence to a stationary point. Numerical evaluations indicate a promising gain of the proposed approaches for providing information secrecy against the untrusted infrastructure nodes and/or external eavesdroppers in the context of FD C-RAN communications.

cs.IT↗

Hardware Impairments Aware Transceiver Design for Bidirectional Full-Duplex MIMO OFDM Systems

In this paper we address the linear precoding and decoding design problem for a bidirectional orthogonal frequencydivision multiplexing (OFDM) communication system, between two multiple-input multiple-output (MIMO) full-duplex (FD) nodes. The effects of hardware distortion as well as the channel state information error are taken into account. In the first step, we transform the available time-domain characterization of the hardware distortions for FD MIMO transceivers to the frequency domain, via a linear Fourier transformation. As a result, the explicit impact of hardware inaccuracies on the residual selfinterference (RSI) and inter-carrier leakage (ICL) is formulated in relation to the intended transmit/received signals. Afterwards, linear precoding and decoding designs are proposed to enhance the system performance following the minimum-mean-squarederror (MMSE) and sum rate maximization strategies, assuming the availability of perfect or erroneous CSI. The proposed designs are based on the application of alternating optimization over the system parameters, leading to a necessary convergence. Numerical results indicate that the application of a distortionaware design is essential for a system with a high hardware distortion, or for a system with a low thermal noise variance.

cs.IT↗

Hardware Impairments Aware Transceiver Design for Full-Duplex Amplify-and-Forward MIMO Relaying

In this work we study the behavior of a full-duplex (FD) and amplify-and-forward (AF) relay with multiple antennas, where hardware impairments of the FD relay transceiver is taken into account. Due to the inter-dependency of the transmit relay power on each antenna and the residual self-interference in an FD-AF relay, we observe a distortion loop that degrades the system performance when the relay dynamic range is not high. In this regard, we analyze the relay function in presence of the hardware inaccuracies and an optimization problem is formulated to maximize the signal to distortion-plus-noise ratio (SDNR), under relay and source transmit power constraints. Due to the problem complexity, we propose a gradient-projection-based (GP) algorithm to obtain an optimal solution. Moreover, a nonalternating sub-optimal solution is proposed by assuming a rank-1 relay amplification matrix, and separating the design of the relay process into multiple stages (MuStR1). The proposed MuStR1 method is then enhanced by introducing an alternating update over the optimization variables, denoted as AltMuStR1 algorithm. It is observed that compared to GP, (Alt)MuStR1 algorithms significantly reduce the required computational complexity at the expense of a slight performance degradation. Finally, the proposed methods are evaluated under various system conditions, and compared with the methods available in the current literature. In particular, it is observed that as the hardware impairments increase, or for a system with a high transmit power, the impact of applying a distortion-aware design is significant.

cs.IT↗