arXiv subjects

Ali Hajimiri

Publications and source records attributed to Ali Hajimiri.

14 recordsLinked to original sources

arXiv2026

Generation of entanglement statistics with a large-scale integrated photonic-electronic circuit

Continuous-variable quantum processors scale with the modes they can transform, and each transformation adds loss. We demonstrate optoelectronic quantum information processing, moving the mixing into radio-frequency electronics after homodyne detection. Squeezed vacuum falls on a large-scale integrated photonic-electronic circuit, a 32-channel coherent receiver array whose radio-frequency network mixes the analog photocurrents. A local-oscillator ramp reconstructs the two-mode covariance at the aperture, which is physical, and its partial transpose has smallest symplectic eigenvalue 0.99270, three standard deviations below the separability bound. Mode transformation becomes a circuit function whose scale follows integrated electronics. With electro-optic transducers in place of the photodiodes, the same receiver would transfer optical modes into superconducting circuits and back, toward a photonic-electronic quantum computer spanning the optical and microwave bands.

quant-ph↗

arXiv2026

Quantum coherent transceivers toward Holevo-limited communications

The Holevo limit bounds the channel capacity of a communication channel in which information is encoded in quantum states in a Hilbert space at the transmitter and decoded using quantum measurements at the receiver. Saturating the Holevo limit requires quantum-limited transceivers that either generate quantum states of light or employ quantum-limited measurements. Here, we demonstrate an integrated photonic-electronic quantum-limited coherent receiver (QRX) achieving 14.0 dB shot noise clearance (SNC), 520 $\mu$W knee power, 2.57 GHz 3-dB bandwidth, 3.50 GHz shot-noise-limited bandwidth, and 90.2 dB common-mode rejection ratio ($\mathrm{CMRR}$). We scale this design to a 32-channel QRX array with median 26.6 dB $\mathrm{SNC}$, and automatic $\mathrm{CMRR}$ correction yielding a median 76.8 dB $\mathrm{CMRR}$ at minimum. Using the integrated QRX and fiber-optic transmitter, we measure $0.15\pm0.01$ dB of squeezing below the shot noise limit, limited by off-chip losses. We propose a squeezed light communication scheme that can surpass the Shannon limit, with a path toward the Holevo limit.

quant-ph↗

arXiv2025

Electrical Impedance Tomography with an Integrated Picoliter-Volume Subtractive Microfluidic Chamber in 65 nm CMOS

Electrical impedance tomography with fully integrated microfluidics and electronics is presented for the first time in a CMOS chip. Chambers and electrodes are fabricated in the interconnect layers of a 65 nm CMOS chip through post-processing, enabling picoliter-volumes to be processed and imaged. Tomography maps are reconstructed by reading out voltages from a 16-element electrode array and processing the data off-chip, and sources of variation in reconstruction are discussed. The EIT system presented in this work serves as a proof-of-concept towards using CMOS as a platform for co-integrated microfluidics and electronics.

physics.ins-det↗

arXiv2024

Free-space quantum information platform on a chip

Emerging technologies that employ quantum physics offer fundamental enhancements in information processing tasks, including sensing, communications, and computing. Here, we introduce the quantum phased array, which generalizes the operating principles of phased arrays and wavefront engineering to quantum fields, and report the first quantum phased array technology demonstration. An integrated photonic-electronic system is used to manipulate free-space quantum information to establish reconfigurable wireless quantum links in a standalone, compact form factor. Such a robust, scalable, and integrated quantum platform can enable broad deployment of quantum technologies with high connectivity, potentially expanding their use cases to real-world applications. We report the first, to our knowledge, free-space-to-chip interface for quantum links, enabled by 32 metamaterial antennas with more than 500,000 sub-wavelength engineered nanophotonic elements over a 550 x 550 $\mathrm{μm}^2$ physical aperture. We implement a 32-channel array of quantum coherent receivers with 30.3 dB shot noise clearance and 90.2 dB common-mode rejection ratio that downconverts the quantum optical information via homodyne detection and processes it coherently in the radio-frequency domain. With our platform, we demonstrate 32-pixel imaging of squeezed light for quantum sensing, reconfigurable free-space links for quantum communications, and proof-of-concept entanglement generation for measurement-based quantum computing. This approach offers targeted, real-time, dynamically-adjustable free-space capabilities to integrated quantum systems that can enable wireless quantum technologies.

quant-ph↗

arXiv2024

Wireless Power Transfer in Space using Flexible, Lightweight, Coherent Arrays

Space solar power (SSP), envisioned for decades as a solution for continuous, stable, and dynamically dispatchable clean energy, has seen tremendous interest and a number of experimental demonstrations in the last few years. A practical implementation has been elusive to date, owing to the high launch costs associated with heavy, rigid photovoltaic (PV) and wireless power transfer (WPT) arrays. Lightweight and flexible solutions for WPT have been demonstrated terrestrially but, to date, have not been deployed and tested in space. In this paper, we present an experimental space demonstration of a lightweight, flexible WPT array powered by custom radio frequency integrated circuits (RFICs). The transmit arrays, receive arrays, and the rest of the system were operated and tested for eight months in Low Earth Orbit (LEO). Results from these experiments, including pointing of the array's beam to Earth and its detection by a ground station, are presented and discussed in detail. Observations and results from this mission uncover existing strengths and weaknesses that inform future steps toward realizing SSP.

physics.app-ph↗

arXiv2023

Popup Arrays for Large Space-Borne Apertures

Large apertures in space are critical for high-power and high-bandwidth applications spanning wireless power transfer (WPT) and communication, however progress on this front is stunted by the geometric limitations of rocket flight. Here, we present a light and flexible 10GHz array, which is composed of dipole antennas co-cured to a glass-fiber composite. The arrays are designed to dynamically conform to new shapes and to be flexible enough to fold completely flat, coil, and pop back up upon deployment. The design was chosen to be amenable to scalable, automated manufacturing - a requirement for the massive production necessary for large apertures. Moreover, the arrays passed the standard gamut of required space-qualification testing: the antennas can survive mechanical stress, extreme temperatures, high-frequency temperature cycling, and prolonged stowage in the flattened configuration. The elements exhibit excellent electromagnetic performance - with a return ratio better than -10dB over a bandwidth of 1.5GHz and a single lobe half-power beam width of greater than $110^\circ$ suitable for broad range beamforming and with excellent manufacturing consistency. Moreover, its mechanical durability vis-a-vis extreme temperatures and protracted stowage lends itself to demanding space applications. This lightweight and scalable array is equipped to serve a host of new space-based radio-frequency technologies and applications which leverage large, stowable and durable array apertures.

physics.app-ph↗

arXiv2023

Flexible Phased Array Sheets: A Techno-Economic Analysis

Phased arrays have enabled advances in communications, sensing, imaging, and wireless power transfer. In all these applications, large apertures enable higher power, higher data rates, higher resolution, and complex functionalities, but are elusive owing to a correspondingly large cost, mass, and physical size. Flexible phased arrays (FPAs) show potential in breaking this trade-off. Their thinness and extremely low mass allow FPAs to be folded, rolled, or otherwise compressed into smaller sizes, thus enabling new regimes of transport and entirely new applications currently not possible. Though a number laboratory prototypes of FPAs have been constructed, the economics of large-scale FPA production has yet to be explored. This paper presents a model FPA architecture and a cost model for producing it at large-scale. The estimate of the per-unit-area cost is bounded by a three-tiered approach. The cost model projects a "middle" estimate for FPA production at $89 per square meter. Estimates for aerial mass density and startup cost are also discussed. This cost model demonstrates that an FPA can be produced at an efficient price point and can potentially replace existing solutions for space, communications, and vehicular applications that demand lightweight, portability, and durability in extreme conditions.

physics.app-ph↗

arXiv2022

Large-Scale Crosstalk-Corrected Thermo-Optic Phase Shifter Arrays in Silicon Photonics

We introduce a thermo-optic phase shifter (TOPS) array architecture with independent phase control of each phase shifter for large-scale and high-density photonic integrated circuits with two different control schemes: pulse amplitude modulation (PAM) and pulse width modulation (PWM). We realize a compact spiral TOPS and a 288-element high-density row-column TOPS array with this architecture and drive TOPS with waveforms of both control schemes and of different array sizes. We present a thermal excitation model and a finite difference method-based simulation to simulate large-scale TOPS arrays and compare both schemes experimentally and theoretically. We also analyze the effects of thermal crosstalk in the realized TOPS array and implement a thermal crosstalk correction algorithm with the developed model. The high-density TOPS array architecture and the thermal crosstalk correction algorithm pave the way for high-density TOPS arrays with independent phase control in large-scale photonic integrated circuits interfaced with electronics limited in voltage swing and bandwidth.

physics.optics↗

arXiv2022

A Lightweight Space-based Solar Power Generation and Transmission Satellite

We propose a novel design for a lightweight, high-performance space-based solar power array combined with power beaming capability for operation in geosynchronous orbit and transmission of power to Earth. We use a modular configuration of small, repeatable unit cells, called tiles, that each individually perform power collection, conversion, and transmission. Sunlight is collected via lightweight parabolic concentrators and converted to DC electric power with high efficiency III-V photovoltaics. Several CMOS integrated circuits within each tile generates and controls the phase of multiple independently-controlled microwave sources using the DC power. These sources are coupled to multiple radiating antennas which act as elements of a large phased array to beam the RF power to Earth. The power is sent to Earth at a frequency chosen in the range of 1-10 GHz and collected with ground-based rectennas at a local intensity no larger than ambient sunlight. We achieve significantly reduced mass compared to previous designs by taking advantage of solar concentration, current CMOS integrated circuit technology, and ultralight structural elements. Of note, the resulting satellite has no movable parts once it is fully deployed and all beam steering is done electronically. Our design is safe, scalable, and able to be deployed and tested with progressively larger configurations starting with a single unit cell that could fit on a cube satellite. The design reported on here has an areal mass density of 160 g/m2 and an end-to-end efficiency of 7-14%. We believe this is a significant step forward to the realization of space-based solar power, a concept once of science fiction.

astro-ph.IM↗

arXiv2021

Discretization of Annular-Ring Diffraction Pattern for Large-Scale Photonics Beamforming

A solid-state active beamformer based on the annular-ring diffraction pattern is proposed for an integrated photonic platform. Such a circularly symmetric annular-ring aperture achieves radiating element limited FOV. Furthermore, it is demonstrated that a multi-annular-ring aperture with a fixed linear density of elements maintains the beam efficiency for larger apertures while reducing the beamwidth and side-lobe-level (SLL). A 255-element multi-annular-ring OPA with active beamforming is implemented in a standard photonics process. 510 phase and amplitude modulators enable beamforming and beam steering using this aperture. A row-column drive methodology reduces the required electrical drivers by more than a factor of 5.

physics.optics↗

arXiv2021

Achieving Full Grating-Lobe-Free Field-of-View with Low-Complexity Co-prime Photonic Beamforming Transceivers

Integrated photonic active beamforming can significantly reduce the size and cost of coherent imagers for LiDAR and medical imaging applications. In current architectures, the complexity of photonic and electronic circuitry linearly increases with the desired imaging resolution. We propose a novel photonic transceiver architecture based on co-prime sampling techniques that breaks this trade-off and achieves the full (radiating-element-limited) field-of-view (FOV) for a 2D aperture with a single-frequency laser. Using only order-of-N radiating elements, this architecture achieves beamwidth and side-lobe level (SLL) performance equivalent to a transceiver with order-of-N-squared elements with half-wavelength spacing. Furthermore, we incorporate a pulse amplitude modulation (PAM) row-column drive methodology to reduce the number of required electrical drivers for this architecture from order of N to order of square root of N. A silicon photonics implementation of this architecture using two 64-element apertures, one for transmitting and one for receiving, requires only 34 PAM electrical drivers and achieves a transceiver SLL of -11.3dB with 1026 total resolvable spots, and 0.6 degree beamwidth within a 23x16.3 degree FOV.

eess.SP↗

arXiv2021

IQ Photonic Receiver for Coherent Imaging with a Scalable Aperture

Silicon photonics (SiP) integrated coherent image sensors offer higher sensitivity and improved range-resolution-product compared to direct detection image sensors such as CCD and CMOS devices. Previous generation of SiP coherent imagers suffer from relative optical phase fluctuations between the signal and reference paths, which results in random phase and amplitude fluctuations in the output signal. This limitation negatively impacts the SNR and signal acquisition times. Here we present a coherent imager system that suppresses the optical carrier signal and removes non-idealities from the relative optical path using a photonic in-phase (I) and quadrature (Q) receiver via a $90^\circ$ hybrid detector. Furthermore, we incorporate row-column read-out and row-column addressing schemes to address the electro-optical interconnect density challenge. Our novel row-column read-out architecture for the sensor array requires only $2N$ interconnects for $N^2$ sensors. An $8\times8$ IQ sensor array is presented as a proof-of-concept demonstration with $1.2\times 10^{-5}$ resolution over range accuracy. Free-space FMCW ranging with 250um resolution at 1m distance has been demonstrated using this sensor array.

eess.SP↗

arXiv2018

Three Dimensional Aggregation of Magnetic Particles

Magnetic drug delivery is a promising therapeutic because of magnetic fields' ability to permeate unperturbed in human tissue. One of the long-standing challenges in magnetic drug delivery is the inability to generate 3D aggregation non-invasively within the interior of the body. Earnshaw's theorem, which proves the impossibility of creating an energetic minimum in a curl-free and divergence-free field such as a magnetic field. However, one of the assumptions of Earnshaw's theorem is a static field. Here we show that it is possible to utilize a dynamically changing field and a dissipative force such as the drag, which is generally present, to create a stable aggregation point for magnetic particles. We also introduce a theoretical framework for designing the suitable magnetic fields for controlling a given magnetic particle in a particular fluid. This framework enables accurate determination of the necessary parameters for aggregation across a wide variety of magnetic particles and across multiple biologically-relevant fluids. By coating magnetic particles with desired therapeutic agents or attaching them to cells, a new class of treatment methodologies can be created in therapies such as targeted drug delivery and cell-based therapies. By dynamically changing the aggregation point, agents can also be guided along a particular path in the body. This technique of using dissipative forces to create a stable 3D aggregation point for particles could possibly be extended to a broad range of applications such as microscopic and macroscopic manipulation, robotics, guided self-assembly, magnetic plasma confinement, tissue engineering, and ion traps for quantum computers.

physics.app-ph↗

arXiv2012

Gone with the Wind ON_Mars (GOWON): A Wind-Driven Networked System of Mobile Sensors on Mars

We propose a revolutionary way of studying the sur-face of Mars using a wind-driven network of mobile sensors- Gone with the Wind ON_Mars (GOWON). GOWON is envisioned to be a scalable, 100% self energy-generating and distributed system that allows in-situ mapping of a wide range of phenomena in a much larger portion of the surface of Mars compared to earlier missions. It could radically improve the possibility of finding rare phenomena like bio signatures through random wind-driven search. It could explore difficult terrains that were beyond the reach of previous missions, such as regions with very steep slopes, cluttered surfaces and/or sand dunes; GOWON is envisioned as an on going mission with a long life span. It could achieve any of NASA's scientific objectives on Mars in a cost-effective way, leaving a long lasting sensing and searching infrastructure on Mars. GOWON is a 2012 Step B invitee for NASA Innovative Advanced Concept (NIAC). It addresses the challenge area of the Mars Surface System Capabilities area. We believe the challenge to be near-term, i.e., 2018-2024.

physics.ins-det↗