arXiv subjects

Ali Hallal

Publications and source records attributed to Ali Hallal.

17 recordsLinked to original sources

arXiv2021

Mechanism of Spin-Orbit Torques in Platinum Oxide Systems

Spin-Orbit Torque (SOT) Magnetic Random-Access Memories (MRAM) have shown promising results towards the realization of fast, non-volatile memory systems. Oxidation of the heavy-metal (HM) layer of the SOT-MRAM has been proposed as a method to increase its energy efficiency. But the results are widely divergent due to the difficulty in controlling the HM oxidation because of its low enthalpy of formation. Here, we reconcile these differences by performing a gradual oxidation procedure, which allows correlating the chemical structure to the physical properties of the stack. As an HM layer, we chose Pt because of the strong SOT and the low enthalpy of formation of its oxides. We find evidence of an oxide inversion layer at the FM/HM interface: the oxygen is drawn into the FM, while the HM remains metallic near the interface. We further demonstrate that the oxygen migrates in the volume of the FM layer rather than being concentrated at the interface. Consequently, we find that the intrinsic magnitude of the SOT is unchanged compared to the fully metallic structure. The previously reported apparent increase of SOTs is not intrinsic to platinum oxide and instead arises from systemic changes produced by oxidation.

cond-mat.mes-hall↗

arXiv2021

Large-scale epitaxy of two-dimensional van der Waals room-temperature ferromagnet Fe5GeTe2

In recent years, two-dimensional van der Waals materials have emerged as an important platform for the observation of long-range ferromagnetic order in atomically thin layers. Although heterostructures of such materials can be conceived to harness and couple a wide range of magneto-optical and magneto-electrical properties, technologically relevant applications require Curie temperatures at or above room-temperature and the ability to grow films over large areas. Here we demonstrate the large-area growth of single-crystal ultrathin films of stoichiometric Fe5GeTe2 on an insulating substrate using molecular beam epitaxy. Magnetic measurements show the persistence of soft ferromagnetism up to room temperature, with a Curie temperature of 293 K, and a weak out-of-plane magnetocrystalline anisotropy. Surface, chemical, and structural characterizations confirm the layer-by-layer growth, 5:1:2 Fe:Ge:Te stoichiometric elementary composition, and single crystalline character of the films.

cond-mat.mtrl-sci↗

arXiv2021

Rashba-type Dzyaloshinskii-Moriya interaction, perpendicular magnetic anisotropy and skyrmion states at 2D materials/Co interfaces

We report a significant Dzyaloshinskii-Moriya interaction (DMI) and perpendicular magnetic anisotropy (PMA) at interfaces comprising hexagonal boron nitride (h-BN) and Co. By comparing the behavior of these phenomena at graphene/Co and h-BN/Co interfaces, it is found that the DMI in latter increases as a function of Co thickness and beyond three monolayers stabilizes with one order of magnitude larger values compared to those at graphene/Co, where the DMI shows opposite decreasing behavior. At the same time, the PMA for both systems shows similar trends with larger values for graphene/Co and no significant variations for all thickness ranges of Co. Furthermore, using micromagnetic simulations we demonstrate that such significant DMI and PMA values remaining stable over large range of Co thickness give rise to formation of skyrmions with small applied external fields in the range of 200-250 mT up to 100 K temperatures. These findings open up further possibilities towards integrating two-dimensional (2D) materials in spin-orbitronics devices.

cond-mat.mtrl-sci↗

arXiv2021

Spin charge conversion in Rashba split ferromagnetic interfaces

We show here theoretically and experimentally that a Rashba-split electron state inside a ferromagnet can efficiently convert a dynamical spin accumulation into an electrical voltage. The effect is understood to stem from the Rashba splitting but with a symmetry linked to the magnetization direction. It is experimentally measured by spin pumping in a CoFeB/MgO structure where it is found to be as efficient as the inverse spin Hall effect at play when Pt replaces MgO, with the extra advantage of not affecting the damping in the ferromagnet.

cond-mat.mes-hall↗

arXiv2021

Current-driven domain wall dynamics in ferrimagnetic Ni-doped Mn4N films : very large domain wall velocities and reversal of motion direction across the magnetic compensation point

Spin-transfer torque (STT) and spin-orbit torque (SOT) are spintronic phenomena allowing magnetization manipulation using electrical currents. Beyond their fundamental interest, they allow developing new classes of magnetic memories and logic devices, in particular based on domain wall (DW) motion. In this work, we report the study of STT driven DW motion in ferrimagnetic manganese nickel nitride (Mn4-xNixN) films, in which a fine adjustment of the Ni content allows setting the magnetic compensation at room temperature. The reduced magnetization, combined with the large spin polarization of conduction electrons, strongly enhances the STT so that domain wall velocities approaching 3000 m/s can be obtained for Ni compositions close to the compensation point. In addition, a reversal of the domain wall motion direction is observed when the magnetic compensation composition is crossed. This striking feature, related to the change of direction of the spin polarization with respect to that of the net magnetization, is clarified by ab initio band structure calculations.

cond-mat.mtrl-sci↗

arXiv2020

Unveiling temperature dependence mechanisms of perpendicular magnetic anisotropy at Fe/MgO interfaces

The perpendicular magnetic anisotropy (PMA) at magnetic transition metal/oxide interfaces is a key element in building out-of-plane magnetized magnetic tunnel junctions for spin-transfer-torque magnetic random access memory (STT-MRAM). Size downscaling renders magnetic properties more sensitive to thermal effects. Thus, understanding the temperature dependence of the magnetic anisotropy is crucial. In this work, we theoretically address the correlation between temperature dependence of PMA and magnetization in typical Fe/MgO-based structures. In particular, the possible mechanisms behind the experiments reporting deviations from the Callen and Callen scaling power law are analyzed. At ideal interfaces, first-principles calculations reveal (i) small high-order anisotropy constants compared to first order and (ii) enhanced exchange constants. Considering these two intrinsic effects in the atomistic simulations, the temperature-dependence of the total and layer-resolved anisotropy are found to follow the Callen and Callen scaling power law, thus ruling out an intrinsic microscopic mechanism underlying deviations from this law. Besides, two possible extrinsic macroscopic mechanisms are unveiled namely the influence of the dead layer, often present in the storage layer of STT-MRAM cells, and the spatial inhomogeneities of the interfacial magnetic anisotropy. About the first mechanism, we show that the presence of a dead layer tends to reduce the scaling exponents. In the second mechanism, increasing the percentage of inhomogeneity in the interfacial PMA is revealed to decrease the scaling exponent. These results allow us to explain the difference in scaling exponents relating anisotropy and magnetization thermal variations reported in earlier experiments. This is crucial for the understanding of the thermal stability of the storage layer magnetization in STT-MRAM applications.

cond-mat.mtrl-sci↗

arXiv2020

Giant perpendicular magnetic anisotropy enhancement in MgO-based magnetic tunnel junction by using Co/Fe composite layer

Magnetic tunnel junctions with perpendicular anisotropy form the basis of the spin-transfer torque magnetic random-access memory (STT-MRAM), which is non-volatile, fast, dense, and has quasi-infinite write endurance and low power consumption. Based on density functional theory (DFT) calculations, we propose an alternative design of magnetic tunnel junctions comprising Fe(n)Co(m)Fe(n)/MgO storage layers with greatly enhanced perpendicular magnetic anisotropy (PMA) up to several mJ/m2, leveraging the interfacial perpendicular anisotropy of Fe/MgO along with a stress-induced bulk PMA discovered within bcc Co. This giant enhancement dominates the demagnetizing energy when increasing the film thickness. The tunneling magnetoresistance (TMR) estimated from the Julliere model is comparable with that of the pure Fe/MgO case. We discuss the advantages and pitfalls of a real-life fabrication of the structure and propose the Fe(3ML)Co(4ML)Fe(3ML) as a storage layer for MgO-based STT-MRAM cells. The large PMA in strained bcc Co is explained in the framework of Bruno's model by the MgO-imposed strain and consequent changes in the energies of dyz and dz2 minority-spin bands.

cond-mat.mtrl-sci↗

arXiv2020

Very large Dzyaloshinskii-Moriya interaction in two-dimensional Janus manganese dichalcogenides and its application to realize skyrmion states

The Dzyaloshinskii-Moriya interaction (DMI), which only exists in noncentrosymmetric systems, is responsible for the formation of exotic chiral magnetic states. The absence of DMI in most two-dimensional (2D) magnetic materials is due to their intrinsic inversion symmetry. Here, using first-principles calculations, we demonstrate that significant DMI can be obtained in a series of Janus monolayers of manganese dichalcogenides MnXY in which the difference between X and Y on the opposites sides of Mn breaks the inversion symmetry. In particular, the DMI amplitudes of MnSeTe and MnSTe are comparable to those of state-of-the-art ferromagnet/heavy metal (FM/HM) heterostructures. In addition, by performing Monte Carlo simulations, we find that at low temperatures the ground states of the MnSeTe and MnSTe monolayers can transform from ferromagnetic states with worm-like magnetic domains into the skyrmion states by applying external magnetic field. At increasing temperature, the skyrmion states starts fluctuating above 50 K before an evolution to a completely disordered structure at higher temperature. The present results pave the way for new device concepts utilizing chiral magnetic structures in specially designed 2D ferromagnetic materials.

cond-mat.mtrl-sci↗

arXiv2019

Unveiling multiferroic proximity effect in graphene

We demonstrate that electronic and magnetic properties of graphene can be tuned via proximity of multiferroic substrate. Our first-principles calculations performed both with and without spin-orbit coupling clearly show that by contacting graphene with bismuth ferrite BiFeO$_3$ (BFO) film, the spin-dependent electronic structure of graphene is strongly impacted both by the magnetic order and by electric polarization in the underlying BFO. Based on extracted Hamiltonian parameters obtained from the graphene band structure, we propose a concept of six-resistance device based on exploring multiferroic proximity effect giving rise to significant proximity electro- (PER), magneto- (PMR), and multiferroic (PMER) resistance effects. This finding paves a way towards multiferroic control of magnetic properties in two dimensional materials.

cond-mat.mtrl-sci↗

arXiv2019

Graphene-based spinmechatronic valve

Interlayer twist between van der Waals graphene crystals led to the discovery of superconducting and insulating states near the magic angle. In this work, we exploit this mechanical degree of freedom by twisting the graphene middle layer in a trilayer graphene spacer between two metallic lead (Magnetic and nonmagnetic). A large difference in conductance is found depending on the angle of twist between the middle layer graphene and the ones at the interface this difference, called twisting resistance, reach more than 1000% in the non-magnetic Cu case. For the magnetic Ni case, the magneto-resistance decreases and the difference in conductance between twisted and not twisted depends strongly on the relative magnetization configuration. For the parallel configuration, the twisting resistance is about -40%, while for the anti-parallel configuration it can reach up to 130%. Furthermore, we show that the twisting resistance can be enhanced by inserting a thin Cu layer at the interface of Ni/graphene where it reaches a value of 200% and 1600% for parallel and antiparallel configurations, respectively. These finding could pave the way toward the integration of 2D materials on novel spinmechatronics based devices.

physics.app-ph↗

arXiv2019

N\'eel-type skyrmions and their current-induced motion in van der Waals ferromagnet-based heterostructures

Since the discovery of ferromagnetic two-dimensional (2D) van der Waals (vdW) crystals, significant interest on such 2D magnets has emerged, inspired by their appealing properties and integration with other 2D family for unique heterostructures. In known 2D magnets, spin-orbit coupling (SOC) stabilizes perpendicular magnetic anisotropy (PMA). Such a strong SOC could also lift the chiral degeneracy, leading to the formation of topological magnetic textures such as skyrmions through the Dzyaloshinskii-Moriya interaction (DMI). Here, we report the experimental observation of N\'eel-type chiral magnetic skyrmions and their lattice (SkX) formation in a vdW ferromagnet Fe3GeTe2 (FGT). We demonstrate the ability to drive individual skyrmion by short current pulses along a vdW heterostructure, FGT/h-BN, as highly required for any skyrmion-based spintronic device. Using first principle calculations supported by experiments, we unveil the origin of DMI being the interfaces with oxides, which then allows us to engineer vdW heterostructures for desired chiral states. Our finding opens the door to topological spin textures in the 2D vdW magnet and their potential device application.

cond-mat.mtrl-sci↗

arXiv2017

Impact of intergrain spin transfer torques due to huge thermal gradients on the performance of heat assisted magnetic recording

Heat assisted magnetic recording (HAMR) is a new technology which uses temporary near field laser heating of the media during write to increase hard disk drive storage density. By using plasmonic antenna embedded in the write head, extremely high thermal gradient are created in the recording media (up to 10K/nm). State of the art HAMR media consists of grains of FePtX ordered alloys exhibiting high perpendicular anisotropy separated by insulating grain boundaries. Nearby the plasmonic antenna, the difference of temperature between two 8nm wide neighboring grains in the media can reach 80K, representing a gigantic thermal gradient of ~40K/nm across the grain boundary. Such situations with much weaker thermal gradient (~1K/nm, already considered as very large) have already been studied in the field of spincaloritronics. There, it was shown that very large spin transfer torques due to thermal gradients can arise in magnetic tunnel junctions which can even yield magnetization switching. Considering that two neighboring grains separated by an insulating grain boundary in a HAMR media can be viewed as a magnetic tunnel junction and that the thermal gradients in HAMR are one to two orders of magnitude larger than those existing in conventional spincaloritronics, one may expect a major impact from these thermal torques on magnetization switching dynamics and therefore on HAMR recording performances. This paper combines theory, experiments aiming at determining the polarization of tunneling electrons across the media grain boundaries, and micromagnetic simulations of recording process. It is shown that the thermal in-plane torque can have a detrimental impact on the recording performances by favoring antiparallel magnetic alignment between neighboring grains during the media cooling. Implications on media design are discussed in order to limit the impact of these thermal torques.

physics.app-ph↗

arXiv2017

Origin of interfacial perpendicular magnetic anisotropy in MgO/CoFe/metallic capping layer structures

Spin-transfer-torque magnetic random access memory (STT-MRAM) attracts extensive attentions due to its non-volatility, high density and low power consumption. The core device in STT-MRAM is CoFeB/MgO-based magnetic tunnel junction (MTJ), which possesses a high tunnel magnetoresistance ratio as well as a large value of perpendicular magnetic anisotropy (PMA). It has been experimentally proven that a capping layer coating on CoFeB layer is essential to obtain a strong PMA. However, the physical mechanism of such effect remains unclear. In this paper, we investigate the origin of the PMA in MgO/CoFe/metallic capping layer structures by using a first-principles computation scheme. The trend of PMA variation with different capping materials agrees well with experimental results. We find that interfacial PMA in the three-layer structures comes from both the MgO/CoFe and CoFe/capping layer interfaces, which can be analyzed separately. Furthermore, the PMAs in the CoFe/capping layer interfaces are analyzed through resolving the magnetic anisotropy energy by layer and orbital. The variation of PMA with different capping materials is attributed to the different hybridizations of both d and p orbitals via spin-orbital coupling. This work can significantly benefit the research and development of nanoscale STT-MRAM.

cond-mat.mtrl-sci↗

arXiv2016

First principles investigation of magnetocrystalline anisotropy at the L2$_1$ Full Heusler|MgO interfaces and tunnel junctions

Magnetocrystalline anisotropy at Heusler alloy$|$MgO interfaces have been studied using first principles calculations. It is found that Co terminated Co$_{2}$FeAl$|$MgO interfaces show perpendicular magnetic anisotropy up to 1.31 mJ/m$^2$, while those with FeAl termination exhibit in-plane magnetic anisotropy. Atomic layer resolved analysis indicates that the origin of perpendicular magnetic anisotropy in Co$_{2}$FeAl$|$MgO interfaces can be attributed to the out-of-plane orbital contributions of interfacial Co atoms. At the same time, Co$_{2}$MnGe and Co$_{2}$MnSi interfaced with MgO tend to favor in-plane magnetic anisotropy for all terminations.

cond-mat.mtrl-sci↗

arXiv2015

Direct evidence for minority spin gap in the Co2MnSi Heusler alloy

Half Metal Magnets are of great interest in the field of spintronics because of their potential full spin-polarization at the Fermi level and low magnetization damping. The high Curie temperature and predicted 0.7eV minority spin gap make the Heusler alloy Co2MnSi very promising for applications.We investigated the half-metallic magnetic character of this alloy using spin-resolved photoemission, ab initio calculation and ferromagnetic resonance. At the surface of Co2MnSi, a gap in the minority spin channel is observed, leading to 100% spin polarization. However, this gap is 0.3 eV below the Fermi level and a minority spin state is observed at the Fermi level. We show that a minority spin gap at the Fermi energy can nevertheless be recovered either by changing the stoichiometry of the alloy or by covering the surface by Mn, MnSi or MgO. This results in extremely small damping coefficients reaching values as low as 7x 10-4.

cond-mat.mtrl-sci↗

arXiv2015

Anatomy and giant enhancement of the perpendicular magnetic anisotropy of cobalt-graphene heterostructures

We report strongly enhanced perpendicular magnetic anisotropy (PMA) of Co films by graphene coating from both first-principles and experiments. Our calculations show that graphene can dramatically boost the surface anisotropy of Co films up to twice the value of its pristine counterpart and can extend the out-of-plane effective anisotropy up to unprecedented thickness of 25~Å. These findings are supported by our experiments on graphene coating on Co films grown on Ir substrate. Furthermore, we report layer-resolved and orbital-hybridization-resolved anisotropy analysis which help understanding the physical mechanisms of PMA and more practically can help design structures with giant PMA. As an example, we propose super-exchange stabilized Co-graphene heterostructures with a robust out-of-plane constant effective PMA and linearly increasing interfacial anisotropy as a function of film thickness. These findings point towards possibilities to engineer graphene/ferromagnetic metal heterostructures with giant magnetic anisotropy more than 20 times larger compared to conventional multilayers, which constitutes a hallmark for future graphene and traditional spintronic technologies.

cond-mat.mtrl-sci↗

arXiv2015

Band edge noise spectroscopy of a magnetic tunnel junction

We propose a conceptually new way to gather information on the electron bands of buried metal(semiconductor)/insulator interfaces. The bias dependence of low frequency noise in Fe$_{1-x}$V$_{x}$/MgO/Fe (0 $<$ x $<$ 0.25) tunnel junctions show clear anomalies at specific applied voltages, reflecting electron tunneling to the band edges of the magnetic electrodes. The change in magnitude of these noise anomalies with the magnetic state allows evaluating the degree of spin mixing between the spin polarized bands at the ferromagnet/insulator interface. Our results are in qualitative agreement with numerical calculations.

cond-mat.mes-hall↗