Searcharxiv⌕ Search

arXiv subjects

Ali Luo

Publications and source records attributed to Ali Luo.

At least 55 records · Page 3Linked to original sources

Phase II of the LAMOST-Kepler/K2 survey. I. Time series of medium-resolution spectroscopic observations

Phase \RNum{2} of the LAMOST-{\sl Kepler/K}2 survey (LK-MRS), initiated in 2018, aims at collecting medium-resolution spectra ($R\sim7,500$; hereafter MRS) for more than $50,000$ stars with multiple visits ($\sim60$ epochs) over a period of 5 years (2018 September to 2023 June). We selected 20 footprints distributed across the {\sl Kepler} field and six {\sl K}2 campaigns, with each plate containing a number of stars ranging from $\sim2,000$ to $\sim 3,000$. During the first year of observations, the LK-MRS has already collected $\sim280,000$ and $\sim369,000$ high-quality spectra in the blue and red wavelength range, respectively. The atmospheric parameters and radial velocities for $\sim259,000$ spectra of $21,053$ targets were successfully calculated by the LASP pipeline. The internal uncertainties for the effective temperature, surface gravity, metallicity, and radial velocity are found to be $100$\,K, $0.15$\,dex, $0.09$\,dex, and $1.00$\,km\,s$^{-1}$, respectively. We found $14,997$, $20,091$, and $1,514$ stars in common with the targets from the LAMOST low-resolution survey (LRS), GAIA and APOGEE, respectively, corresponding to a fraction of $\sim70\%$, $\sim95\%$ and $\sim7.2\%$. In general, the parameters derived from LK-MRS spectra are consistent with those obtained from the LRS and APOGEE spectra, but the scatter increases as the surface gravity decreases when comparing with the measurements from APOGEE. A large discrepancy is found with the GAIA values of the effective temperature. The comparisons of radial velocities of LK-MRS to GAIA and LK-MRS to APOGEE nearly follow an Gaussian distribution with a mean $μ\sim1.10$ and $0.73$\,km\,s$^{-1}$, respectively.

astro-ph.SR↗

The galaxy luminosity function in the LAMOST Complete Spectroscopic Survey of Pointing Area at the Southern Galactic Cap

We present optical luminosity functions (LFs) of galaxies in the $^{0.1}g$, $^{0.1}r$, and $^{0.1}i$ bands, calculated using data in $\sim 40$ $deg^{2}$ sky area of LAMOST Complete Spectroscopic Survey of Pointing Area (LaCoSSPAr) in Southern Galactic Cap. Redshifts for galaxies brighter $r = 18.1$ were obtained mainly with LAMOST. In each band, LFs derived using both parametric and non-parametric maximum likelihood methods agree well with each other. In the $^{0.1}r$ band, our fitting parameters of the Schechter function are $ϕ_{*}=(1.65\pm0.36)\times10^{-2}h^{3}Mpc^{-3}$, $M_{*}=-20.69\pm0.06$ mag, and $α=-1.12\pm0.08$, in agreements with previous studies. Separate LFs are also derived for emission line galaxies and absorption line galaxies, respectively. The LFs of absorption line galaxies show a dip at $^{0.1}r \sim 18.5$ and can be well fitted by a double-Gaussian function, suggesting a bi-modality in passive galaxies.

astro-ph.GA↗

Radial velocity measurements from LAMOST medium-resolution spectroscopic observations: A pointing towards the Kepler field

Radial velocity is one of key measurements in understanding the fundamental properties of stars, stellar clusters and the Galaxy. A plate of stars in the Kepler field were observed in May of 2018 with the medium-resolution spectrographs of LAMOST, aiming to test the performance of this new system which is the upgraded equipment of LAMOST after the first five-year regular survey.We present our analysis on the radial velocity measurements (RVs) derived from these data. The results show that slight and significant systematic errors exist among the RVs obtained from the spectra collected by different spectrographs and exposures, respectively. After correcting the systematic errors with different techniques, the precision of RVs reaches ~1.3, ~1.0, ~0.5 and ~0.3 km/s at S/Nr = 10, 20, 50, and 100, respectively. Comparing with the RVs of the standard stars of the APOGEE survey, our RVs are calibrated with a zero-point shift of ~7 km/s. The results indicate that the LAMOST medium-resolution spectroscopic system may provide RVs in a reasonable accuracy and precision for the selected targets.

astro-ph.SR↗

LAMOST observations in the Kepler field. II. Database of the low-resolution spectra from the five-year regular survey

The LAMOST-Kepler (LK-) project was initiated to use the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) to make spectroscopic follow-up observations for the targets in the field of the Kepler mission. The Kepler field is divided into 14 subfields that are adapted to the LAMOST circular field with a diameter of 5 degrees. During the regular survey phase of LAMOST, the LK-project took data from 2012 June to 2017 June and covered all the 14 subfields at least twice. In particular, we describe in this paper the second Data Release of the LK-project, including all spectra acquired through 2015 May to 2017 June together with the first round observations of the LK-project from 2012 June to 2014 September. The LK-project now counts 227 870 spectra of 156 390 stars, among which we have derived atmospheric parameters (log g, T eff and [Fe/H]) and heliocentric radial velocity (RV) for 173 971 spectra of 126 172 stars. These parameters were obtained with the most recent version of the LAMOST Stellar Parameter Pipeline v 2.9.7. Nearly one half, namely 76 283 targets, are observed both by LAMOST and Kepler telescopes. These spectra, establishing a large spectroscopy library, will be useful for the entire astronomical community, particularly for planetary science and stellar variability on Kepler targets.

astro-ph.SR↗

LEMONY--a Library of Empirical Medium-resolution spectra by Observations with the NAOC Xinglong 2.16\,m and YNAO Gaomeigu 2.4\,m telescopes

This study expands the coverage and improves the homogeneity of the distribution of MILES template stars in the parameter space, as well as extends the wavelength coverage of the template spectra to the far red beyond the Ca\,{\sc{ii}} triplet. To achieve this we have carried out a major observational campaign using the OMR long-slit spectrograph mounted on the NAOC 2.16\,m telescope and the YFOSC long-slit spectrograph mounted on the YNAO 2.4\,m telescope. The original sample is based on the MILES library, supplemented by 918 stars selected from PASTEL database. In total, 822 OMR and 1,324 YFOSC spectra, covering respectively the wavelength ranges $λλ$3800--5180 and $λλ$5150--9000, have been collected and reduced. The spectra have a mean resolution FWHM (full-width at half-maximum) of $\sim 3.3$\,Å and are wavelength- and flux-calibrated to an accuracy of $\sim 20$\,km\,s$^{-1}$ and $\sim 5$\,per\,cent, respectively. The spectra are further corrected for systematic errors in the wavelength calibration to an accuracy of $\sim 4$\,km\,s$^{-1}$ by cross-correlating with the theoretical spectra. Almost all the spectra have an average signal to noise ratio (SNR) better than 100 per pixel. Combined with the MILES spectra, there are now 1,731, 1,542, 1,324 and 1,273 stars with spectra covering respectively $λλ$3800--5180, $λλ$3800--7500, $λλ$5150--9000 and $λλ$3800--9000. This paper describes our template star selection, the observation and data reduction, and presents the reduced spectra collected hitherto.

astro-ph.SR↗

LAMOST telescope reveals that Neptunian cousins of hot Jupiters are mostly single offspring of stars that are rich in heavy elements

We discover a population of short-period, Neptune-size planets sharing key similarities with hot Jupiters: both populations are preferentially hosted by metal-rich stars, and both are preferentially found in Kepler systems with single transiting planets. We use accurate LAMOST DR4 stellar parameters for main-sequence stars to study the distributions of short-period 1d < P < 10d Kepler planets as a function of host star metallicity. The radius distribution of planets around metal-rich stars is more "puffed up" as compared to that around metal-poor hosts. In two period-radius regimes, planets preferentially reside around metal-rich stars, while there are hardly any planets around metal-poor stars. One is the well-known hot Jupiters, and the other is a population of Neptune-size planets (2 R_Earth <~ R_p <~ 6 R_Earth), dubbed as "Hoptunes". Also like hot Jupiters, Hoptunes occur more frequently in systems with single transiting planets though the fraction of Hoptunes occurring in multiples is larger than that of hot Jupiters. About 1% of solar-type stars host "Hoptunes", and the frequencies of Hoptunes and hot Jupiters increase with consistent trends as a function of [Fe/H]. In the planet radius distribution, hot Jupiters and Hoptunes are separated by a "valley" at approximately Saturn size (in the range of 6 R_Earth <~ R_p <~ 10 R_Earth), and this "hot-Saturn valley" represents approximately an order-of-magnitude decrease in planet frequency compared to hot Jupiters and Hoptunes. The empirical "kinship" between Hoptunes and hot Jupiters suggests likely common processes (migration and/or formation) responsible for their existence.

astro-ph.EP↗

LAMOST Spectroscopic Survey of the Galactic Anticentre (LSS-GAC): the second release of value-added catalogues

We present the second release of value-added catalogues of the LAMOST Spectroscopic Survey of the Galactic Anticentre (LSS-GAC DR2). The catalogues present values of radial velocity $V_{\rm r}$, atmospheric parameters --- effective temperature $T_{\rm eff}$, surface gravity log$g$, metallicity [Fe/H], $α$-element to iron (metal) abundance ratio [$α$/Fe] ([$α$/M]), elemental abundances [C/H] and [N/H], and absolute magnitudes ${\rm M}_V$ and ${\rm M}_{K_{\rm s}}$ deduced from 1.8 million spectra of 1.4 million unique stars targeted by the LSS-GAC since September 2011 until June 2014. The catalogues also give values of interstellar reddening, distance and orbital parameters determined with a variety of techniques, as well as proper motions and multi-band photometry from the far-UV to the mid-IR collected from the literature and various surveys. Accuracies of radial velocities reach 5kms$^{-1}$ for late-type stars, and those of distance estimates range between 10 -- 30 per cent, depending on the spectral signal-to-noise ratios. Precisions of [Fe/H], [C/H] and [N/H] estimates reach 0.1dex, and those of [$α$/Fe] and [$α$/M] reach 0.05dex. The large number of stars, the contiguous sky coverage, the simple yet non-trivial target selection function and the robust estimates of stellar radial velocities and atmospheric parameters, distances and elemental abundances, make the catalogues a valuable data set to study the structure and evolution of the Galaxy, especially the solar-neighbourhood and the outer disk.

astro-ph.GA↗

Estimating stellar atmospheric parameters, absolute magnitudes and elemental abundances from the LAMOST spectra with Kernel-based Principal Component Analysis

Accurate determination of stellar atmospheric parameters and elemental abundances is crucial for Galactic archeology via large-scale spectroscopic surveys. In this paper, we estimate stellar atmospheric parameters -- effective temperature T_{\rm eff}, surface gravity log g and metallicity [Fe/H], absolute magnitudes M_V and M_{Ks}, α-element to metal (and iron) abundance ratio [α/M] (and [α/Fe]), as well as carbon and nitrogen abundances [C/H] and [N/H] from the LAMOST spectra with amultivariate regressionmethod based on kernel-based principal component analysis, using stars in common with other surveys (Hipparcos, Kepler, APOGEE) as training data sets. Both internal and external examinations indicate that given a spectral signal-to-noise ratio (SNR) better than 50, our method is capable of delivering stellar parameters with a precision of ~100K for Teff, ~0.1 dex for log g, 0.3 -- 0.4mag for M_V and M_{Ks}, 0.1 dex for [Fe/H], [C/H] and [N/H], and better than 0.05 dex for [α/M] ([α/Fe]). The results are satisfactory even for a spectral SNR of 20. The work presents first determinations of [C/H] and [N/H] abundances from a vast data set of LAMOST, and, to our knowledge, the first reported implementation of absolute magnitude estimation directly based on the observed spectra. The derived stellar parameters for millions of stars from the LAMOST surveys will be publicly available in the form of value-added catalogues.

astro-ph.SR↗

Exoplanet Orbital Eccentricities Derived From LAMOST-Kepler Analysis

The nearly circular (mean eccentricity ~0.06) and coplanar (mean mutual inclination ~3 deg) orbits of the Solar System planets motivated Kant and Laplace to put forth the hypothesis that planets are formed in disks, which has developed into the widely accepted theory of planet formation. Surprisingly, the first several hundred extrasolar planets (mostly Jovian) discovered using the Radial Velocity (RV) technique are commonly on eccentric orbits ( ~ 0.3). This raises a fundamental question: Are the Solar System and its formation special? The Kepler mission has found thousands of transiting planets dominated by sub-Neptunes, but most of their orbital eccentricities remain unknown. By using the precise spectroscopic host star parameters from the LAMOST observations, we measure the eccentricity distributions for a large (698) and homogeneous Kepler planet sample with transit duration statistics. Nearly half of the planets are in systems with single transiting planets (singles), while the other half are multiple-transiting planets (multiples). We find an eccentricity dichotomy: on average, Kepler singles are on eccentric orbits with ~0.3, while the multiples are on nearly circular ( = 0.04^{+0.03}_{-0.04}) and coplanar ( = 1.4^{+0.8}_{-1.1} deg) orbits similar to the Solar System planets. Our results are consistent with previous studies of smaller samples and individual systems. We also show that Kepler multiples and solar system objects follow a common relation ~(1-2)x between mean eccentricities and mutual inclinations. The prevalence of circular orbits and the common relation may imply that the solar system is not so atypical in the galaxy after all.

astro-ph.EP↗

LAMOST observations in the Kepler field. Analysis of the stellar parameters measured with the LASP based on the low-resolution spectra

All of the 14 subfields of the Kepler field have been observed at least once with the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST, Xinglong Observatory, China) during the 2012-2014 observation seasons. There are 88,628 reduced spectra with SNR$_g$ (signal-to-noise ratio in g band) $\geq$ 6 after the first round (2012-2014) of observations for the LAMOST-Kepler project (LK-project). By adopting the upgraded version of the LAMOST Stellar Parameter pipeline (LASP), we have determined the atmospheric parameters ($T_{\rm eff}$ , $\log g$, and $\rm [Fe/H]$) and heliocentric radial velocity $v_{\rm rad}$ for 51,406 stars with 61,226 spectra. Compared with atmospheric parameters derived from both high-resolution spectroscopy and asteroseismology method for common stars in Huber et al. (2014), an external calibration of LASP atmospheric parameters was made, leading to the determination of external errors for the giants and dwarfs, respectively. Multiple spectroscopic observations for the same objects of the LK-project were used to estimate the internal uncertainties of the atmospheric parameters as a function of SNR$_g$ with the unbiased estimation method. The LASP atmospheric parameters were calibrated based on both the external and internal uncertainties for the giants and dwarfs, respectively. A general statistical analysis of the stellar parameters leads to discovery of 106 candidate metal-poor stars, 9 candidate very metal-poor stars, and 18 candidate high-velocity stars. Fitting formulae were obtained segmentally for both the calibrated atmospheric parameters of the LK-project and the KIC parameters with the common stars. The calibrated atmospheric parameters and radial velocities of the LK-project will be useful for studying stars in the Kepler field.

astro-ph.SR↗

Carbon stars from LAMOST DR2 data

In this work, we present the new catalog of carbon stars from the LAMOST DR2 catalog. In total, 894 carbon stars are identified from multiple line indices measured from the stellar spectra. Combining the CN bands in the red end with \ctwo\ and other lines, we are able to identify the carbon stars. Moreover, we also classify the carbon stars into spectral sub-types of \ch, \CR, and \cn. These sub-types approximately show distinct features in the multi-dimensional line indices, implying that in the future we can use them to identify carbon stars from larger spectroscopic datasets. Meanwhile, from the line indices space, while the \cn\ stars are clearly separated from the others, we find no clear separation between \CR\ and \ch\ sub-types. The \CR\ and \ch\ stars seem to smoothly transition from one to another. This may hint that the \CR\ and \ch\ stars may not be different in their origins but look different in their spectra because of different metallicity. Due to the relatively low spectral resolution and lower signal-to-noise ratio, the ratio of $^{12}$C/$^{13}$C is not measured and thus the \cj\ stars are not identified.

astro-ph.SR↗

Calibration of LAMOST Stellar Surface Gravities Using the Kepler Asteroseismic Data

Asteroseismology is a powerful tool to precisely determine the evolutionary status and fundamental properties of stars. With the unprecedented precision and nearly continuous photometric data acquired by the NASA Kepler mission, parameters of more than 10$^4$ stars have been determined nearly consistently. However, most studies still use photometric effective temperatures (Teff) and metallicities ([Fe/H]) as inputs, which are not sufficiently accurate as suggested by previous studies. We adopted the spectroscopic Teff and [Fe/H] values based on the LAMOST low-resolution spectra (R~1,800), and combined them with the global oscillation parameters to derive the physical parameters of a large sample of stars. Clear trends were found between Δlogg(LAMOST - seismic) and spectroscopic Teff as well as logg, which may result in an overestimation of up to 0.5 dex for the logg of giants in the LAMOST catalog. We established empirical calibration relations for the logg values of dwarfs and giants. These results can be used for determining the precise distances to these stars based on their spectroscopic parameters.

astro-ph.SR↗

A systematic search for the spectra with features of crystalline silicates in the Spitzer IRS Enhanced Products

The crystalline silicates features are mainly reflected in infrared bands. The Spitzer Infrared Spectrograph (IRS) collected numerous spectra of various objects and provided a big database to investigate crystalline silicates in a wide range of astronomical environments. We apply the manifold ranking algorithm to perform a systematic search for the spectra with crystalline silicates features in the Spitzer IRS Enhanced Products available. In total, 868 spectra of 790 sources are found to show the features of crystalline silicate. These objects are cross-matched with the SIMBAD database as well as with the Large Sky Area Multi-Object Fibre Spectroscopic Telescope (LAMOST)/DR2. The average spectrum of young stellar objects show a variety of features dominated either by forsterite or enstatite or neither, while the average spectrum of evolved objects consistently present dominant features of forsterite in AGB, OH/IR, post-AGB and planetary nebulae. They are identified optically as early-type stars, evolved stars, galaxies and so on. In addition, the strength of spectral features in typical silicate complexes is calculated. The results are available through CDS for the astronomical community to further study crystalline silicate.

astro-ph.GA↗

An Efficient Method for Rare Spectra Retrieval in Astronomical Databases

One of important aims of astronomical data mining is to systematically search for specific rare objects in a massive spectral dataset, given a small fraction of identified samples with the same type. Most existing methods are mainly based on binary classification, which usually suffer from uncompleteness when the known samples are too few. While, rank-based methods would provide good solutions for such case. After investigating several algorithms, a method combining bipartite ranking model with bootstrap aggregating techniques was developed in this paper. The method was applied in searching for carbon stars in the spectral data of Sloan Digital Sky Survey (SDSS) DR10, and compared with several other popular methods used in data mining. Experimental results validate that the proposed method is not only the most effective but also less time consuming among these competitors automatically searching for rare spectra in a large but unlabelled dataset.128

astro-ph.GA↗

A sample of galaxy pairs identified from the LAMOST spectral survey and the Sloan Digital Sky Survey

A small fraction($<10\%$) of SDSS main sample galaxies(MGs) have not been targeted with spectroscopy due to the the fiber collision effect. These galaxies have been compiled into the input catalog of the LAMOST extra-galactic survey and named as the complementary galaxy sample. In this paper, we introduce the project and the status of the spectroscopies of the complementary galaxies in the first two years of the LAMOST spectral survey(till Sep. of 2014). Moreover, we present a sample of 1,102 galaxy pairs identified from the LAMOST complementary galaxies and SDSS MGs, which are defined as that the two members have a projected distance smaller than 100 kpc and the recessional velocity difference smaller than 500 $\rm kms^{-1}$. Compared with the SDSS only selected galaxy pairs, the LAMOST-SDSS pairs take the advantages of not being biased toward large separations and therefor play as a useful supplement to the statistical studies of galaxy interaction and galaxy merging.

astro-ph.GA↗

Validation of LAMOST Stellar Parameters with the PASTEL Catalog

Recently the Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) published its first data release (DR1), which is ranked as the largest stellar spectra dataset in the world so far. We combine the PASTEL catalog and SIMBAD radial velocities as a testing standard to validate the DR1 stellar parameters (effective temperature $T_{\mathrm{eff}}$, surface gravity $\log g$, metallicity $\mathrm{[Fe/H]}$ and radial velocity $V_{\mathrm{r}}$). Through cross-identification of the DR1 catalogs and the PASTEL catalog, we obtain a preliminary sample of 422 stars. After removal of stellar parameter measurements from problematic spectra and applying effective temperature constraints to the sample, we compare the stellar parameters from DR1 with those from PASTEL and SIMBAD to prove that the DR1 results are reliable in restricted $T_{\mathrm{eff}}$ ranges. We derive standard deviations of 110 K, 0.19 dex, 0.11 dex and 4.91 $\mathrm{km\,s^{-1}}$ , for $T_{\mathrm{eff}}$, $\log g$, $[\mathrm{Fe/H}]$ when $T_{\mathrm{eff}}<8000\,\mathrm{K}$, and for $V_{\mathrm{r}}$ when $T_{\mathrm{eff}}<10000\,\mathrm{K}$, respectively. Systematic errors are negligible except for that of $V_{\mathrm{r}}$. Besides, metallicities in DR1 are systematically higher than those in PASTEL, in the range of PASTEL $[\mathrm{Fe/H}]<-1.5$.

astro-ph.SR↗

A Sample of E+A Galaxy Candidates in LAMOST Data Released 2

A sample of 70 E+A galaxies are selected from 37, 206 galaxies in the second data release (DR2) of Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST) according to the criteria for E+A galaxies defined by Goto, and each of these objects is further visually identified. In this sample, most objects are low redshift E+A galaxies with z < 0.25, and locate in the high latitude sky area with magnitude among 14 to 18 mag in g, r and i bands. A stellar population analysis for the whole sample indicates that the E+A galaxies are characterized by both young and old stellar populations (SPs), and the metal-rich SPs have relatively higher contributions than the metal-poor ones. Additionally, a morphological classification for these objects is performed based on the images taken from the Sloan Digital Sky Survey (SDSS).

astro-ph.GA↗

SDSS/SEGUE Spectral Feature Analysis For Stellar Atmospheric Parameter Estimation

Large-scale and deep sky survey missions are rapidly collecting a large amount of stellar spectra, which necessitate the estimation of atmospheric parameters directly from spectra and makes it feasible to statistically investigate latent principles in a large dataset. We present a technique for estimating parameters $T_{eff}$, log$~g$ and [Fe/H] from stellar spectra. With this technique, we first extract features from stellar spectra using the LASSO algorithm; then, the parameters are estimated from the extracted features using the SVR. On a subsample of 20~000 stellar spectra from SDSS with reference parameters provided by SDSS/SEGUE Pipeline SSPP, estimation consistency are 0.007458 dex for log$~T_{eff}$ (101.609921 K for $T_{eff}$), 0.189557 dex for log$~g$ and 0.182060 for [Fe/H], where the consistency is evaluated by mean absolute error. Prominent characteristics of the proposed scheme are sparseness, locality, and physical interpretability. In this work, every spectrum consists of 3821 fluxes, and 10, 19, and 14 typical wavelength positions are detected respectively for estimating $T_{eff}$, log$~g$ and [Fe/H]. It is shown that the positions are related to typical lines of stellar spectra. This characteristic is important in investigating physical indications from analysis results. Then, stellar spectra can be described by the individual fluxes on the detected positions (PD) or local integration of fluxes near them (LI). The abovementioned consistency is the result based on features described by LI. If features are described by PD, consistency are 0.009092 dex for log$~T_{eff}$ (124.545075 K for $T_{eff}$), 0.198928 dex for log$~g$, and 0.206814 dex for [Fe/H].

astro-ph.SR↗