arXiv subjects

Alicia Middleton

Publications and source records attributed to Alicia Middleton.

9 recordsLinked to original sources

arXiv2026

CCAT: The Prime-Cam Instrument for the Fred Young Submillimeter Telescope -- Overview and Status

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST), under construction at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam will deliver over ten times greater mapping speed at submillimeter wavelengths than current facilities for unprecedented broadband and spectroscopic measurements in windows between 1.4 -- 0.3 mm (220 -- 850 GHz). When fully populated, Prime-Cam will field over 100,000 kinetic inductance detectors across seven independently optimized instrument modules. With Prime-Cam, the CCAT Collaboration will address a suite of science goals, from Big Bang cosmology, to galaxy evolution and star formation over cosmic time. Prime-Cam is scheduled for integration in FYST in late 2026, followed by a year of early science observations with the 280 and 350 GHz instrument modules. We discuss the design and in-lab testing of the 1.8-m diameter Prime-Cam receiver and 280 GHz instrument module, and give an update on deployment status and early science plans.

astro-ph.IM↗

arXiv2026

CCAT: Design and Characterization of the 350 GHz Instrument Module

The CCAT Collaboration's Prime-Cam instrument will soon be deployed to the Fred Young Submillimeter Telescope (FYST) in Chile's Atacama Desert. Featuring prominently in Prime-Cam's calibration and early science observations will be the 350 GHz instrument module, a broadband camera that will field more than 10,000 microwave kinetic inductance detectors (KIDs) across three detector arrays. Forecasts show this module will be capable of making the most sensitive to-date measurements of polarized dust emission over a large fraction of the sky at this frequency, enabling new galactic polarization science and improved understanding of cosmological foregrounds. In this work we discuss the design of the 350 GHz instrument module, covering aspects of the optics, readout, and detector arrays. We then report on the results of in-lab testing of the fully-integrated module, achieving stable cryogenic performance with a 100 mK focal plane, high detector yield, and a passband comparable to designed specifications. Upon completion of these tests, this module was shipped to the telescope site in Chile for integration in Prime-Cam.

astro-ph.IM↗

arXiv2025

CCAT: Design, Implementation, and Testing of a System to Read Out over 10,000 280 GHz KIDs using RFSoC Electronics

Over the past decade, kinetic inductance detectors (KIDs) have emerged as a viable superconducting technology for astrophysics at millimeter and submillimeter wavelengths. KIDs spanning 210 - 850 GHz across seven instrument modules will be deployed in the Prime-Cam instrument of CCAT Observatory's Fred Young Submillimeter Telescope at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. The natural frequency-division multiplexed readout of KIDs allows hundreds of detectors to be coupled to a single radio frequency (RF) transmission line, but requires sophisticated warm readout electronics. The FPGA-based Xilinx ZCU111 radio frequency system on chip (RFSoC) offers a promising and flexible solution to the challenge of warm readout. CCAT uses custom packaged RFSoCs to read out KIDs in the Prime-Cam instrument. Each RFSoC can simultaneously read out four RF channels with up to 1,000 detectors spanning a 512 MHz bandwidth per channel using the current firmware. We use five RFSoCs to read out the >10,000 KIDs in the broadband 280 GHz instrument module. Here, we describe and demonstrate the readout hardware, software and pipeline for the RFSoC system. We present a detector position map of the 280 GHz module focal plane and preliminary averaged spectral responses of a small subset of detectors from the TiN and first Al arrays. These measurements demonstrate our ability to simultaneously readout thousands of detectors, validate the end-to-end performance of the readout and optical systems, and represent a critical step toward reading out the ~100,000 KIDs in Prime-Cam in its future full capacity configuration.

astro-ph.IM↗

arXiv2025

The Simons Observatory: Characterization of All DC/RF Routing Wafers for Detector Modules

The Simons Observatory (SO) is a cosmic microwave background experiment with over 67,000 polarization-sensitive transition-edge sensor (TES) detectors currently installed for use in observations and plans to increase the total detector count to ${\sim}$98,000 detectors with the Advanced SO upgrade. The TES arrays are packaged into Universal Focal-Plane Modules (UFMs), which also contain the multiplexing readout circuit. Within a readout module, a DC/RF routing wafer provides a cold interface between the detectors and the readout multiplexing chips. Each routing wafer hosts twelve bias lines, which contain the ${\sim}$400 $μΩ$ shunt resistors that are part of the TES bias circuitry. More than 70 routing wafers have been fabricated and tested both at room temperature and 100 mK before integration into UFMs. The lab measurements for all screened wafers have been compiled to show the distribution of measured average shunt resistance Rsh for each bias line, both across bias lines on a single routing wafer and across all routing wafers. The mean average shunt resistance for all wafers was found to be 396 $μΩ$ with a standard deviation of 16 $μΩ$, or ${\sim}$4%. For each wafer, we note good uniformity of average Rsh between bias lines, with a slight downward trend with increasing distance from the center of the wafer. The fabrication data collected at room temperature shows agreement with the cryogenic measurements of Rsh distribution.

astro-ph.IM↗

arXiv2025

CCAT: Mod-Cam Cryogenic Performance and its Impact on 280 GHz KID Array Noise

The CCAT Observatory's Fred Young Submillimeter Telescope (FYST) is designed to observe submillimeter astronomical signals with high precision, using receivers fielding state-of-the-art kinetic inductance detector (KID) arrays. Mod-Cam, a first-light instrument for FYST, serves as a testbed for instrument module characterization, including detailed evaluation of thermal behavior under operating conditions prior to deploying modules in the larger Prime-Cam instrument. Prime-Cam is a first generation multi-band, wide-field camera for FYST, designed to field up to seven instrument modules and provide unprecedented sensitivity across a broad frequency range. We present results from two key laboratory characterizations: an "optically open" cooldown to validate the overall thermal performance of the cryostat, and a "cold load" cooldown to measure the effect of focal plane temperature stability on detector noise. During the optically open test, we achieved stable base temperatures of 1.5 K on the 1 K stage and 85 mK at the detector stage. In the cold load configuration, we measured a detector focal plane RMS temperature stability of 3.2e-5 K. From this stability measurement, we demonstrate that the equivalent power from focal plane thermal fluctuations is only 0.0040% of a 5pW incident photon power for aluminum detectors and 0.0023% for titanium-nitride detectors, a negligible level for CCAT science goals. This highlights the success of the cryogenic system design and thermal management.

astro-ph.IM↗

arXiv2025

CCAT: Mod-Cam Readout Overview and Flexible Stripline Performance

The CCAT Observatory's primary science instrument, Prime-Cam, is nearing readiness for deployment to the Fred Young Submillimeter Telescope (FYST) in the Atacama Desert in northern Chile. When fully deployed, Prime-Cam will field approximately 100,000 kinetic inductance detectors (KIDs) across seven instrument modules making both broadband and polarimetric measurements. Meanwhile, in-lab characterization of the first CCAT instrument module, a 280 GHz broadband camera fielding over 10,000 KIDs, is currently underway in the testbed instrument Mod-Cam. Both Mod-Cam and Prime-Cam will employ 46 cm long low-thermal-conductivity flexible circuits ("stripline") between 4 K and 300 K to connect large-format arrays of multiplexed KIDs in each instrument module to readout electronics. The 280 GHz camera currently installed in Mod-Cam uses six of these striplines to read out its over 10,000 detectors. We have examined the thermal and electrical performance of the stripline installed in Mod-Cam. We begin by characterizing the OFHC copper in the stripline traces, allowing for the estimation of thermal loading through these flexible circuits in their configurations in both Mod-Cam and Prime-Cam. We then directly measure the thermal conductivity of the stripline, finding it is best described by $kA = 22\pm6~T^{0.84\pm0.09}~\mathrm{\mu~W~m~K^{-1}}$ for temperature ranges of 6 K < T < 20 K and $kA~=~0.6\pm0.3~T^{-0.4\pm0.1}~\mathrm{mW~m~K^{-1}}$ for ranges from 20 K < T < 80 K. Following our thermal characterizations, we report on the transmission and crosstalk properties of the Mod-Cam readout chain, isolating elevated crosstalk to SMP-SMA transition printed circuit boards (PCBs) that interface with the stripline. This finding validates the stripline circuit as a viable high-density cabling option for large-format array readout.

astro-ph.IM↗

arXiv2024

CCAT: LED Mapping and Characterization of the 280 GHz TiN KID Array

Prime-Cam, one of the primary instruments for the Fred Young Submillimeter Telescope (FYST) developed by the CCAT Collaboration, will house up to seven instrument modules, with the first operating at 280 GHz. Each module will include three arrays of superconducting microwave kinetic inductance detectors (KIDs). The first KID array fabricated for the 280 GHz module uses titanium-nitride (TiN) as the superconducting material and has 3,456 individual detectors, while the other two arrays use aluminum. This paper presents the design and laboratory characterization of the 280 GHz TiN array, which is cooled below its critical temperature to ~0.1 K and read out over six RF feedlines. LED mapping, a technique for matching the measured resonant frequency of a detector to its physical position, was performed on the array so that the results can be used to lithographically trim the KID capacitors and increase the yield of the array by reducing frequency collisions. We present the methods and results of LED mapping the 280 GHz TiN KID array before deployment on FYST.

astro-ph.IM↗

arXiv2024

CCAT: Prime-Cam Optics Overview and Status Update

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST). FYST's crossed-Dragone design provides high optical throughput to take advantage of its unique site at 5600 m on Cerro Chajnantor in Chile's Atacama Desert to reach mapping speeds over ten times greater than current and near-term submillimeter experiments. Housing up to seven independent instrument modules in its 1.8-meter diameter cryostat, Prime-Cam will combine broadband polarization-sensitive modules and spectrometer modules designed for observations in several frequency windows between 210 GHz and 850 GHz to study a wide range of astrophysical questions from Big Bang cosmology to the formation of stars and galaxies in the Epoch of Reionization and beyond. In order to cover this range of frequencies and observation modes, each of the modules contains a set of cold reimaging optics that is optimized for the science goals of that module. These optical setups include several filters, three or four anti-reflection-coated silicon lenses, and a Lyot stop to control the field of view and illumination of the primary mirror, satisfy a series of mechanical constraints, and maximize optical performance within each passband. We summarize the design considerations and trade-offs for the optics in these modules and provide a status update on the fabrication of the Prime-Cam receiver and the design of its 1 K and 100 mK thermal BUSs.

astro-ph.IM↗

arXiv2024

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.

astro-ph.IM↗