Searcharxiv⌕ Search

arXiv subjects

Alin Albu-Schäffer

Publications and source records attributed to Alin Albu-Schäffer.

At least 19 recordsLinked to original sources

Fast Non-Parametric Heteroscedastic Imitation Learning With Geometric Priors

When learning probabilistic policies from human demonstrations, data-efficient learning and fast adaptations to new scenarios are key requirements. One popular way to achieve intuitive and reliable adaptations is through non-parametric, typically kernel-based, methods. However, existing solutions either fail to account for the geometry of manifolds common in robotics, limiting data efficiency, or, when geometry-aware, provide unreliable uncertainty estimates or require retraining to adapt. We propose a non-parametric approach leveraging geometric priors in scenarios of data scarcity and heteroscedastic uncertainties for probabilistic modeling. We utilize the method to formulate policies based on time or robot state, where non-separable diagonal kernels allow capturing uncertainty relations between degrees of freedom for same-sized in- and outputs. Fast updates, requiring less than 3 ms for a trajectory involving both position and orientation are possible through an optimized formulation. Our approach supports both manifold-valued input and manifold-valued output with large orientation changes. Using task parameterization, adaptation to different object poses is easily possible. We evaluate the approach on a set of toy examples and on real robot manipulation tasks both in autonomous execution and in shared control scenarios.

cs.RO↗

Natural Swing-Up of an Underpowered Double Pendulum

Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6\,\% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.

cs.RO↗

A Unified Framework for Probabilistic Dynamic-, Trajectory- and Vision-based Virtual Fixtures

Probabilistic Virtual Fixtures (VFs) enable the adaptive selection of the most suitable haptic feedback for each phase of a task, based on learned or perceived uncertainty. While keeping the human in the loop remains essential, for instance, to ensure high precision, partial automation of certain task phases is critical for productivity. We present a unified framework for probabilistic VFs that seamlessly switches between manual fixtures, semi-automated fixtures (with the human handling precise tasks), and full autonomy. We introduce a novel probabilistic Dynamical System-based VF for coarse guidance, enabling the robot to autonomously complete certain task phases while keeping the human operator in the loop. For tasks requiring precise guidance, we extend probabilistic position-based trajectory fixtures with automation, allowing for seamless human interaction, geometry-awareness and optimal impedance gains. For manual tasks requiring very precise guidance, we also extend visual servoing fixtures with the same geometry-awareness and impedance behavior. We validate our approach on different robots, including an evaluation with expert users, showcasing operation modes, the ease of programming fixtures and lower interaction forces and favorable usability compared to a baseline.

cs.RO↗

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

cs.RO↗

Learning Geometry-Aware Virtual Fixtures From Sparse Demonstrations

In many teleoperation applications, collecting a large number of demonstrations as required for traditional probabilistic learning from demonstration (LfD) approaches may not be feasible. To still give operators the ability to intuitively create trajectories as Virtual Fixtures (VFs), we propose to leverage a motion prior in the learning process. Particularly, by using Linear Quadratic Tracking (LQT), users are able to define guiding trajectories from the demonstration of just a few via points. To account for orientation guidance, we further reformulate classical LQT on Riemannian manifolds, introducing an additional geometric prior. Through a probabilistic interpretation of the LQT solution, we derive a covariance estimate at each trajectory point which we use to modulate the stiffness of the resulting fixture, resulting in strong guidance around the via points and softer guidance when far away. The covariance information is also used to define a validity region of the fixture, allowing the operator to leave its influence area and conduct unmodeled tasks. We evaluate the proposed Riemannian LQT formulation in a set of toy examples and the full framework on a cutting task requiring high precision in a minimally invasive surgery setting on the da Vinci Research Kit (dVRK).

cs.RO↗

Strict Modes Everywhere - Bringing Order Into Dynamics of Mechanical Systems by a Potential Compatible With the Geodesic Flow

Strict nonlinear normal modes provide very regular families of oscillations within conservative mechanical systems. However, a strict normal mode will generally be an isolated curve within the configuration space of the system. In this letter, we design a potential that will densely fill the configuration space with strict normal modes such that each configuration belongs to one mode and each mode passes through a common point, the equilibrium. As the potential can be realized by (nonlinear) elastic elements it can be used to execute a variety of periodic trajectories very efficiently. Most of the required torques will come from the elastic elements in the system and not from the actuators. We also design a controller stabilizing the system to a desired target mode and a controller performing swing-up and compensating dissipated energy. Finally, we showcase the approach for a two DoF manipulator. The experiments show that the approach performed well for the example system.

cs.RO↗

MOMO: A framework for seamless physical, verbal, and graphical robot skill learning and adaptation

Industrial robot applications require increasingly flexible systems that non-expert users can easily adapt for varying tasks and environments. However, different adaptations benefit from different interaction modalities. We present an interactive framework that enables robot skill adaptation through three complementary modalities: kinesthetic touch for precise spatial corrections, natural language for high-level semantic modifications, and a graphical web interface for visualizing geometric relations and trajectories, inspecting and adjusting parameters, and editing via-points by drag-and-drop. The framework integrates five components: energy-based human-intention detection, a tool-based LLM architecture (where the LLM selects and parameterizes predefined functions rather than generating code) for safe natural language adaptation, Kernelized Movement Primitives (KMPs) for motion encoding, probabilistic Virtual Fixtures for guided demonstration recording, and ergodic control for surface finishing. We demonstrate that this tool-based LLM architecture generalizes skill adaptation from KMPs to ergodic control, enabling voice-commanded surface finishing. Validation on a 7-DoF torque-controlled robot at the Automatica 2025 trade fair demonstrates the practical applicability of our approach in industrial settings.

cs.RO↗

Symmetric Lyapunov Subcenter Manifolds for Periodic Regulation of Mechanical Systems

Multi-body mechanical systems have rich internal dynamics, whose solutions can be exploited as energy-efficient control targets. Yet, solutions non-trivially depend on system parameters, obscuring feasible properties for use as target trajectories. For periodic regulation tasks in robotics applications, we investigate properties of nonlinear oscillations collected in Lyapunov subcenter manifolds (LSMs) of conservative mechanical systems (CMs). Using a time-symmetry of CMs, it is shown that mild non-resonance conditions guarantee that LSMs exclusively consist of oscillations between two points of zero velocity. The existence of a unique generator is proven, which is a connected, 1D manifold that collects these points of zero velocity for a given LSM. Furthermore, it is shown that an additional spatial symmetry provides LSMs with yet stronger properties of Rosenberg manifolds. Here all oscillations pass through a unique equilibrium configuration, which can be favorable for control applications. These theoretical results are numerically confirmed on two mechanical systems: a double pendulum and a 5-link pendulum.

math.DS↗

ErgoSurf: Ergodic Control for the Coverage of Unknown Surfaces

Contact-centric tasks on surfaces, ranging from inspection and cleaning to sanding and polishing, require robots to systematically cover the surface while maintaining stable contact. Ergodic control generates trajectories that spend time at a location proportional to a desired, task-specific spatial distribution, enabling efficient information gathering and coverage. However, traditional ergodic control methods rely on prior knowledge of surface geometry or require a vision sensory input to scan the geometry beforehand, limiting their applicability in real-world scenarios with unknown or dynamic environments. This paper introduces a novel online ergodic control framework that achieves systematic surface coverage while simultaneously reconstructing unknown surface geometry. We employ a Gaussian Process Implicit Surface (GPIS) model that learns global surface geometry from intrinsic tactile sensing during execution. For efficient online planning, we approximate the surface locally using point clouds sampled from tangent planes at observed contact points and iteratively fit them to the Gaussian Process. This approximation simultaneously serves as the sampling domain for both the target and the coverage distributions. We employ a heat-diffusion analogy to compute potential fields that guide ergodic exploration, translating spatial coverage objectives into smooth robot trajectories. We demonstrate our framework through simulation and real-robot experiments, validating simultaneous ergodic coverage and online surface geometry learning with reconstruction errors approaching the ground truth.

cs.RO↗

Passive Variable Impedance For Shared Control

Shared Control methods often use impedance control to track target poses in a robotic manipulator. The guidance behavior of such controllers is shaped by the used stiffness gains, which can be varying over time to achieve an adaptive guiding. When multiple target poses are tracked at the same time with varying importance, the corresponding output wrenches have to be arbitrated with weightings changing over time. In this work, we study the stabilization of both variable stiffness in impedance control as well as the arbitration of different controllers through a scaled addition of their output wrenches, reformulating both into a holistic framework. We identify passivity violations in the closed loop system and provide methods to passivate the system. The resulting approach can be used to stabilize standard impedance controllers, allowing for the development of novel and flexible shared control methods. We do not constrain the design of stiffness matrices or arbitration factors; both can be matrix-valued including off-diagonal elements and change arbitrarily over time. The proposed methods are furthermore validated in simulation as well as in real robot experiments on different systems, proving their effectiveness and showcasing different behaviors which can be utilized depending on the requirements of the shared control approach.

cs.RO↗

CLASP: Language-Driven Robot Skill Selection and Composition using Task-Parameterized Learning

Enabling robots to understand and execute tasks from natural language commands while maintaining data efficiency remains challenging. Foundation models such as vision-language-action (VLA) and vision-language models (VLMs) provide intuitive interaction channels but require extensive data; task-parameterized imitation learning achieves data efficiency but lacks natural language grounding. This work bridges this gap through a modular architecture combining task-parameterized kernelized movement primitives (TP-KMPs) with pretrained VLMs. During learning, skills are acquired from 2 to 5 kinesthetic demonstrations, and the VLM generates skill schemas describing each skill's parameters and preconditions. During execution, the VLM interprets commands to select skills, reason about parameter bindings, and create novel behaviors through covariance-weighted composition. When no skill or composition suffices, the system identifies capability gaps and requests targeted demonstrations, all without fine-tuning. Validation on a 7-DoF manipulator shows success rates of 73.3%-100% in scenarios requiring skill selection, composition, and active learning.

cs.RO↗

Locomotion of an Elastic Snake Robot via Natural Dynamics

Nature suggests that exploiting the elasticities and natural dynamics of robotic systems could increase their locomotion efficiency. Prior work on elastic snake robots supports this hypothesis, but has not fully exploited the nonlinear dynamic behavior of the systems. Recent advances in eigenmanifold theory enable a better characterization of the natural dynamics in complex nonlinear systems. This letter investigates if and how the nonlinear natural dynamics of a kinematic elastic snake robot can be used to design efficient gaits. Two types of gaits based on natural dynamics are presented and compared to a state-of-the-art approach using dynamics simulations. The results reveal that a gait generated by switching between two nonlinear normal modes does not improve the locomotion efficiency of the robot. In contrast, gaits based on non-brake periodic trajectories (non-brake orbits) are perfectly efficient in the energy-conservative case. Further simulations with friction reveal that, in a more realistic scenario, non-brake orbit gaits achieve higher efficiency compared to the baseline gait on the rigid system. Overall, the investigation offers promising insights into the design of gaits based on natural dynamics, fostering further research.

cs.RO↗

IROSA: Interactive Robot Skill Adaptation using Natural Language

Foundation models have demonstrated impressive capabilities across diverse domains, while imitation learning provides principled methods for robot skill adaptation from limited data. Combining these approaches holds significant promise for direct application to robotics, yet this combination has received limited attention, particularly for industrial deployment. We present a novel framework that enables open-vocabulary skill adaptation through a tool-based architecture, maintaining a protective abstraction layer between the language model and robot hardware. Our approach leverages pre-trained LLMs to select and parameterize specific tools for adapting robot skills without requiring fine-tuning or direct model-to-robot interaction. We demonstrate the framework on a 7-DoF torque-controlled robot performing an industrial bearing ring insertion task, showing successful skill adaptation through natural language commands for speed adjustment, trajectory correction, and obstacle avoidance while maintaining safety, transparency, and interpretability.

cs.RO↗

Are Foundation Models the Route to Full-Stack Transfer in Robotics?

In humans and robots alike, transfer learning occurs at different levels of abstraction, from high-level linguistic transfer to low-level transfer of motor skills. In this article, we provide an overview of the impact that foundation models and transformer networks have had on these different levels, bringing robots closer than ever to "full-stack transfer". Considering LLMs, VLMs and VLAs from a robotic transfer learning perspective allows us to highlight recurring concepts for transfer, beyond specific implementations. We also consider the challenges of data collection and transfer benchmarks for robotics in the age of foundation models. Are foundation models the route to full-stack transfer in robotics? Our expectation is that they will certainly stay on this route as a key technology.

cs.RO↗

Discovering Optimal Natural Gaits of Dissipative Systems via Virtual Energy Injection

Legged robots offer several advantages when navigating unstructured environments, but they often fall short of the efficiency achieved by wheeled robots. One promising strategy to improve their energy economy is to leverage their natural (unactuated) dynamics using elastic elements. This work explores that concept by designing energy-optimal control inputs through a unified, multi-stage framework. It starts with a novel energy injection technique to identify passive motion patterns by harnessing the system's natural dynamics. This enables the discovery of passive solutions even in systems with energy dissipation caused by factors such as friction or plastic collisions. Building on these passive solutions, we then employ a continuation approach to derive energy-optimal control inputs for the fully actuated, dissipative robotic system. The method is tested on simulated models to demonstrate its applicability in both single- and multi-legged robotic systems. This analysis provides valuable insights into the design and operation of elastic legged robots, offering pathways to improve their efficiency and adaptability by exploiting the natural system dynamics.

cs.RO↗

Learning-based adaption of robotic friction models

In the Fourth Industrial Revolution, wherein artificial intelligence and the automation of machines occupy a central role, the deployment of robots is indispensable. However, the manufacturing process using robots, especially in collaboration with humans, is highly intricate. In particular, modeling the friction torque in robotic joints is a longstanding problem due to the lack of a good mathematical description. This motivates the usage of data-driven methods in recent works. However, model-based and data-driven models often exhibit limitations in their ability to generalize beyond the specific dynamics they were trained on, as we demonstrate in this paper. To address this challenge, we introduce a novel approach based on residual learning, which aims to adapt an existing friction model to new dynamics using as little data as possible. We validate our approach by training a base neural network on a symmetric friction data set to learn an accurate relation between the velocity and the friction torque. Subsequently, to adapt to more complex asymmetric settings, we train a second network on a small dataset, focusing on predicting the residual of the initial network's output. By combining the output of both networks in a suitable manner, our proposed estimator outperforms the conventional model-based approach, an extended LuGre model, and the base neural network significantly. Furthermore, we evaluate our method on trajectories involving external loads and still observe a substantial improvement, approximately 60-70%, over the conventional approach. Our method does not rely on data with external load during training, eliminating the need for external torque sensors. This demonstrates the generalization capability of our approach, even with a small amount of data--less than a minute--enabling adaptation to diverse scenarios based on prior knowledge about friction in different settings.

cs.RO↗

Interactive incremental learning of generalizable skills with local trajectory modulation

The problem of generalization in learning from demonstration (LfD) has received considerable attention over the years, particularly within the context of movement primitives, where a number of approaches have emerged. Recently, two important approaches have gained recognition. While one leverages via-points to adapt skills locally by modulating demonstrated trajectories, another relies on so-called task-parameterized models that encode movements with respect to different coordinate systems, using a product of probabilities for generalization. While the former are well-suited to precise, local modulations, the latter aim at generalizing over large regions of the workspace and often involve multiple objects. Addressing the quality of generalization by leveraging both approaches simultaneously has received little attention. In this work, we propose an interactive imitation learning framework that simultaneously leverages local and global modulations of trajectory distributions. Building on the kernelized movement primitives (KMP) framework, we introduce novel mechanisms for skill modulation from direct human corrective feedback. Our approach particularly exploits the concept of via-points to incrementally and interactively 1) improve the model accuracy locally, 2) add new objects to the task during execution and 3) extend the skill into regions where demonstrations were not provided. We evaluate our method on a bearing ring-loading task using a torque-controlled, 7-DoF, DLR SARA robot.

cs.LG↗

Software for the SpaceDREAM Robotic Arm

Impedance-controlled robots are widely used on Earth to perform interaction-rich tasks and will be a key enabler for In-Space Servicing, Assembly and Manufacturing (ISAM) activities. This paper introduces the software architecture used on the On-Board Computer (OBC) for the planned SpaceDREAM mission aiming to validate such robotic arm in Lower Earth Orbit (LEO) conducted by the German Aerospace Center (DLR) in cooperation with KINETIK Space GmbH and the Technical University of Munich (TUM). During the mission several free motion as well as contact tasks are to be performed in order to verify proper functionality of the robot in position and impedance control on joint level as well as in cartesian control. The tasks are selected to be representative for subsequent servicing missions e.g. requiring interface docking or precise manipulation. The software on the OBC commands the robot's joints via SpaceWire to perform those mission tasks, reads camera images and data from additional sensors and sends telemetry data through an Ethernet link via the spacecraft down to Earth. It is set up to execute a predefined mission after receiving a start signal from the spacecraft while it should be extendable to receive commands from Earth for later missions. Core design principle was to reuse as much existing software and to stay as close as possible to existing robot software stacks at DLR. This allowed for a quick full operational start of the robot arm compared to a custom development of all robot software, a lower entry barrier for software developers as well as a reuse of existing libraries. While not every line of code can be tested with this design, most of the software has already proven its functionality through daily execution on multiple robot systems.

cs.RO↗