arXiv subjects

Alireza Shahsafi

Publications and source records attributed to Alireza Shahsafi.

15 recordsLinked to original sources

arXiv2022

Wavelength-by-wavelength temperature-independent thermal radiation utilizing an insulator-metal transition

Both the magnitude and spectrum of the blackbody-radiation distribution change with temperature. Here, we designed the temperature-dependent spectral emissivity of a coating to counteract all the changes in the blackbody-radiation distribution over a certain temperature range, enabled by the nonhysteretic insulator-to-metal phase transition of SmNiO3. At each wavelength within the long-wave infrared atmospheric-transparency window, the thermal radiance of our coating remains nearly constant over a temperature range of at least 20 °C. Our approach can conceal thermal gradients and transient temperature changes from infrared imaging systems, including those that discriminate by wavelength, such as multispectral and hyperspectral cameras.

physics.optics↗

arXiv2021

Planck spectroscopy

All spectrometers rely on some mechanism to achieve spectral selectivity; common examples include gratings, prisms, and interferometers with moving mirrors. We experimentally demonstrated and validated a spectroscopic technique -- here dubbed Planck spectroscopy -- that measures the spectral emissivity of a surface using only a temperature-controlled stage and a detector, without any wavelength-selective optical components. Planck spectroscopy involves the measurement of temperature-dependent thermally emitted power, where the spectral selectivity is realized via the temperature- and wavelength dependence of Planck's law. We experimentally demonstrated and validated Planck spectroscopy in the mid infrared, for wavelengths from 3 to 13 um -- limited primarily by the bandwidth of our detector -- with resolution of approximately 1 um. The minimalistic setup of Planck spectroscopy can be implemented using infrared cameras to achieve low-cost infrared hyperspectral imaging and imaging ellipsometry.

physics.optics↗

arXiv2021

Passive frequency conversion of ultraviolet images into the visible using perovskite nanocrystals

We demonstrate a passive down-conversion imaging system that converts broadband ultraviolet light to narrow-band green light while preserving the directionality of rays, and thus enabling direct down-conversion imaging. At the same time our system has high transparency in the visible, enabling superimposed visible and ultraviolet imaging. The frequency conversion is performed by a subwavelength-thickness transparent downconverter based on highly efficient CsPbBr3 nanocrystals incorporated into the focal plane of a simple telescope or relay-lens geometry. The resulting imaging performance of this down-conversion system approaches the diffraction limit. This demonstration sets the stage for the incorporation of other high-efficiency perovskite nanocrystal materials to enable passive multi-frequency conversion imaging systems.

physics.optics↗

arXiv2020

Hyperspectral interference tomography of nacre

Structural characterization of biologically formed materials is essential for understanding biological phenomena and their environment, and generating new bio-inspired engineering concepts. For example, nacre -- formed by mollusks in the ocean -- encodes local environmental conditions throughout its formation and has exceptional strength due to its nanoscale brick-and-mortar structure. This layered structure, comprising transparent aragonite tablets bonded with an ultra-thin organic polymer, also results in stunning interference colors. Existing methods of structural characterization of nacre rely on some form of cross-sectional analysis, such as scanning electron microscopy or polarization-dependent imaging contrast (PIC) mapping. However, these techniques are destructive and too time- and resource-intensive to analyze large sample areas. Here we present an all-optical, rapid, and non-destructive imaging technique -- hyperspectral interference tomography (HIT) -- to spatially map the structural parameters of nacre and other disordered layered materials. We combined hyperspectral imaging with optical-interference modeling to infer the mean tablet thickness and disordering of nacre layers across entire mollusk shells at various stages of development, observing a previously unknown relationship between the growth of the mollusk and tablet thickness. Our rapid, inexpensive, and nondestructive method can be readily applied to in-field studies.

physics.optics↗

arXiv2020

Ultrathin broadband reflective optical limiter

Optical limiters are nonlinear devices that feature decreasing transmittance with increasing incident optical intensity, and thus can protect sensitive components from high-intensity illumination. The ideal optical limiter reflects rather than absorbs light in its active ("limiting") state, minimizing risk of damage to the limiter itself. Previous efforts to realize reflective limiters were based on embedding nonlinear layers into relatively thick multilayer photonic structures, resulting in substantial fabrication complexity, reduced speed and, in some instances, limited working bandwidth. We overcome these tradeoffs by using the insulator-to-metal transition in vanadium dioxide (VO2) to achieve intensity-dependent modulation of resonant transmission through aperture antennas. Due to the dramatic change of optical properties across the insulator-to-metal transition, low-quality-factor resonators were sufficient to achieve high on-off ratios in device transmittance. As a result, our ultra-thin reflective limiter (thickness ~1/100 of the free-space wavelength) is broadband in terms of operating wavelength (> 2 um at 10 um) and angle of incidence (up to ~50$°$ away from the normal).

physics.optics↗

arXiv2019

Guidelines for measurement of thermal emission

Thermal emission is the radiation of electromagnetic waves from hot objects. The promise of thermal-emission engineering for applications in energy harvesting, radiative cooling, and thermal camouflage has recently led to renewed research interest in this topic. There is a substantial need for accurate and precise measurement of thermal emission in a laboratory setting, which can be challenging in part due to the presence of background emission from the surrounding environment and the measurement instrument itself. This is especially true for measurements of emitters at temperatures close to that of the environment, where the impact of background emission is relatively large. In this paper, we describe, recommend, and demonstrate general procedures for thermal-emission measurements that are applicable to most experimental conditions, including less-common and more-challenging cases that include thermal emitters with temperature-dependent emissivity and emitters that are not in thermal equilibrium.

physics.optics↗

arXiv2019

Wide-angle spectrally selective absorbers and thermal emitters based on inverse opals

Engineered optical absorbers are of substantial interest for applications ranging from stray light reduction to energy conversion. We demonstrate a large-area (centimeter-scale) metamaterial that features near-unity frequency-selective absorption in the mid-infrared wavelength range. The metamaterial comprises a self-assembled porous structure known as an inverse opal, here made of silica. The structure's large volume fraction of voids, together with the vibrational resonances of silica in the mid-infrared spectral range, reduce the metamaterial's refractive index to close to that of air and introduce considerable optical absorption. As a result, the frequency-selective structure efficiently absorbs incident light of both polarizations even at very oblique incidence angles. The absorber remains stable at high temperatures (measured up to ~900 degrees C), enabling its operation as a frequency-selective thermal emitter. The excellent performance of this absorber/emitter and ease of fabrication make it a promising surface coating for passive radiative cooling, laser safety, and other large-area applications.

physics.optics↗

arXiv2019

Temperature-independent thermal radiation

Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO3), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition. The smooth and hysteresis-free nature of this unique insulator-to-metal (IMT) phase transition allows us to engineer the temperature dependence of emissivity to precisely cancel out the intrinsic blackbody profile described by the Stefan-Boltzmann law, for both heating and cooling. Our design results in temperature-independent thermally emitted power within the long-wave atmospheric transparency window (wavelengths of 8 - 14 um), across a broad temperature range of ~30 °C, centered around ~120 °C. The ability to decouple temperature and thermal emission opens a new gateway for controlling the visibility of objects to infrared cameras and, more broadly, new opportunities for quantum materials in controlling heat transfer.

physics.optics↗

arXiv2019

Depth thermography: non-invasive 3D temperature profiling using infrared thermal emission

We introduce a technique based on infrared thermal emission, termed depth thermography, that can remotely measure the temperature distribution beneath the surface of certain objects. Depth thermography utilizes the thermal-emission spectrum in the semitransparent spectral region of the target object to extract its temperature as a function of depth, in contrast with conventional thermography, which uses the spectrally integrated thermally emitted power to measure the surface temperature. Coupled with two-dimensional imaging, e.g., using an infrared hyperspectral camera or scanning a single-pixel spectrometer, this technique can yield volumetric temperature distributions. We carried out a proof-of-concept experiment on an asymmetrically heated fused-silica window, extracting the temperature distribution throughout the sample. Depth thermography may enable noncontact volumetric temperature measurements of microscopic objects such as multilayer electronic devices or macroscopic volumes of liquids and gasses as well as simultaneous all-optical measurements of optical and thermal properties.

physics.optics↗

arXiv2019

Optical properties of thin-film vanadium dioxide from the visible to the far infrared

The insulator-to-metal transition (IMT) in vanadium dioxide (VO2) can enable a variety of optics applications, including switching and modulation, optical limiting, and tuning of optical resonators. Despite the widespread interest in optics, the optical properties of VO2 across its IMT are scattered throughout the literature, and are not available in some wavelength regions. We characterized the complex refractive index of VO2 thin films across the IMT for free-space wavelengths from 300 nm to 30 μm, using broadband spectroscopic ellipsometry, reflection spectroscopy, and the application of effective-medium theory. We studied VO2 thin films of different thickness, on two different substrates (silicon and sapphire), and grown using different synthesis methods (sputtering and sol gel). While there are differences in the optical properties of VO2 synthesized under different conditions, they are relatively minor compared to the change resulting from the IMT, most notably in the ~2 - 11 μm range where the insulating phase of VO2 has relatively low optical loss. We found that the macroscopic optical properties of VO2 are much more robust to sample-to-sample variation compared to the electrical properties, making the refractive-index datasets from this article broadly useful for modeling and design of VO2-based optical and optoelectronic components.

physics.optics↗

arXiv2018

Thermal-emission measurements near room temperature using Fourier-transform infrared spectroscopy

Accurate characterization of thermal emitters can be challenging due to the presence of background thermal emission from components of the experimental setup and the surrounding environment. This is especially true for an emitter operating close to room temperature. Here, we explore characterization of near-room-temperature thermal emitters using Fourier-transform infrared (FTIR) spectroscopy. We find that the thermal background arising from optical components placed between the beam splitter and the detector in an FTIR spectrometer appears as a "negative" contribution to the Fourier-transformed signal, leading to errors in thermal-emission measurements near room temperature. Awareness of this contribution will help properly calibrate low-temperature thermal-emission measurements.

physics.ins-det↗

arXiv2018

Enhancing human color vision by breaking binocular redundancy

To see color, the human visual system combines the response of three types of cone cells in the retina--a compressive process that discards a significant amount of spectral information. Here, we present an approach to enhance human color vision by breaking its inherent binocular redundancy, providing different spectral content to each eye. We fabricated a set of optical filters that "splits" the response of the short-wavelength cone between the two eyes in individuals with typical trichromatic vision, simulating the presence of approximately four distinct cone types ("tetrachromacy"). Such an increase in the number of effective cone types can reduce the prevalence of metamers--pairs of distinct spectra that resolve to the same tristimulus values. This technique may result in an enhancement of spectral perception, with applications ranging from camouflage detection and anti-counterfeiting to new types of artwork and data visualization.

physics.bio-ph↗

arXiv2018

Accelerating vapor condensation with daytime radiative cooling

Vapor condensation plays a crucial role in solar water-purification technologies. Conventional condensers in solar water-purification systems do not provide sufficient cooling power for vapor condensation, limiting the water production rate to $0.4 L m^{-2} hour^{-1}$. On the other hand, radiative dew condensation, a technique used by existing radiative dew condensers, only works at nighttime and is incompatible with solar water-purification technologies. Here, we develop daytime radiative condensers that reflect almost all solar radiation, and can thus create dew water even in direct sunlight. Compared to state-of-art condensers, our daytime radiative condenser doubles the production of purified water over a 24-hour period. The integration of our daytime radiative condenser with solar water-purification systems can increase the water production rate in sunlight from $0.4 L m^{-2} hour^{-1}$ to more than $1 L m^{-2} hour^{-1}$.

physics.app-ph↗

arXiv2018

Impact of corrosion on the emissivity of advanced-reactor structural alloys

Under standard operating conditions, the emissivity of structural alloys used for various components of nuclear reactors may evolve, affecting the heat transfer of the systems. In this study, mid-infrared emissivities of several reactor structural alloys were measured before and after exposure to environments relevant to next-generation reactors. We evaluated nickel-based alloys Haynes 230 and Inconel 617 exposed to helium gas at 1000 $^{\circ}$C, nickel-based Hastelloy N and iron-based 316 stainless steel exposed to molten salts at 750-850 $^{\circ}$C, 316 stainless steel exposed to liquid sodium at 650 $^{\circ}$C, and 316 stainless steel and Haynes 230 exposed to supercritical CO2 at 650 $^{\circ}$C. Emissivity was measured via emissive and reflective techniques using a Fourier transform infrared (FTIR) spectrometer. Large increases in emissivity are observed for alloys exposed to oxidizing environments, while only minor differences were observed in other exposure conditions.

physics.app-ph↗

arXiv2018

Mid-infrared optics using dielectrics with refractive indices below unity

Conventional transparent materials at optical frequencies have refractive index values (n) greater than unity -- most commonly between about 1 and 4. This paper explores optical phenomena made possible by using materials with refractive indices less than unity. We focus primarily on fused silica (SiO2), a polar dielectric with strong phonon resonances in the mid infrared that result in a spectral region in which n < 1 with modest optical loss. Using this ubiquitous easy-to-deposit material, we demonstrate infrared-frequency external reflection, frustrated external reflection, and direct coupling to surface plasmon polaritons from free space. Our work suggests that materials with refractive indices below unity can bring significant new functionality to optical devices.

physics.optics↗