arXiv subjects

Alva Kosasih

Publications and source records attributed to Alva Kosasih.

At least 19 recordsLinked to original sources

arXiv2026

Learning Energy-Efficient Modular Arrays under Hardware Non-linearities

This paper investigates the joint optimization of power allocation and antenna activation in sparse extremely large aperture array systems operating under power amplifier non-linearities. We first derive an analytical expression for the achievable spectral efficiency (SE) of point-to-point MIMO channels affected by non-linear distortions using the Bussgang decomposition. To address the combinatorial and non-convex nature of the energy-efficiency (EE) maximization problem, we employ an unsupervised deep neural network (DNN) that learns the non-linear mapping between the channel state information and the optimal EE operating point. The DNN jointly predicts distortion-aware power allocation, total transmit power scaling, and modular sub-array activation based on singular-value and geometric channel features. Numerical results demonstrate that the proposed DNN-based arrays achieve significant EE gains over the conventional sparse arrays.

eess.SP↗

arXiv2026

Performance Evaluation of Movable Antenna Arrays in Wideband Multi-User MIMO Systems

Future wireless networks are expected to support increasingly high data rates and user densities, motivating advanced multi-antenna architectures capable of adapting to dynamic propagation environments. Movable antenna (MA) arrays have recently emerged as an extension of massive MIMO, enabling physical repositioning of antenna elements to better exploit spatial diversity and mitigate inter-user interference. While prior studies report promising gains under idealized assumptions, their performance under realistic wideband multi-user operation remains insufficiently understood. This paper presents a comprehensive evaluation of MA-enabled systems in practical uplink and downlink scenarios. A wideband OFDM system model is developed, and novel closed-form sum-rate expressions are derived for both uplink and downlink under linear and nonlinear processing. Hardware impairments are incorporated via an EVM-based model, from which a distortion-aware UL/DL duality is established and the resulting high-SNR sum rate ceiling is analytically characterized. In addition, the interactions between antenna position optimization, receiver processing, and user loading are examined, and performance is evaluated under both time-division duplexing (TDD) and frequency-division duplexing (FDD). The results show that movable antennas can provide noticeable gains in low-impairment regimes with strong multi-user interference, but these benefits are highly scenario-dependent and diminish under hardware-impairment-limited conditions or in rich-scattering environments. These findings highlight the importance of carefully assessing deployment conditions when considering antenna mobility as an alternative to conventional fixed array configurations.

eess.SP↗

arXiv2026

Quantized Precoding for Maximizing Sum Rate in MU-MIMO Systems with Constrained Fronthaul

This paper studies a downlink multi-user multiple-input multiple-output (MU-MIMO) system, where the precoding matrix is computed at a baseband unit (BBU) and then transmitted to the remote antenna array over a limited-capacity digital fronthaul. The limited bit resolution of the fronthaul introduces quantization effects that are explicitly modeled. We propose a novel sum rate maximization framework that directly incorporates the quantizer's constraints into the precoding design. The resulting maximization problem, a non-convex mixed-integer program, is addressed using a new iterative algorithm inspired by the weighted minimum mean square error (WMMSE) methodology. The precoding optimization subproblem is reformulated as an integer least-squares problem and solved using a novel sphere decoding (SD) algorithm. Additionally, a low-complexity expectation propagation (EP)-based method is introduced to enable the practical implementation of quantized precoding in MU-massive MIMO (MU-mMIMO) systems. Furthermore, numerical evaluations demonstrate that the proposed precoding schemes outperform conventional approaches that optimize infinite-resolution precoding followed by element-wise quantization. We also propose a heuristic quantization-aware precoding method with comparable complexity to the baseline but superior performance. In particular, the EP-based approach offers near-optimal performance with substantial complexity reduction, making it well-suited for real-time MU-mMIMO applications.

eess.SP↗

arXiv2026

Maximum A Posteriori Probability Channel Tracking with an Intelligent Transmitting Surface

This paper considers an intelligent transmitting surface (ITS) integrated into a base station and develops a low-overhead maximum a posteriori (MAP) probability channel tracking method for the dominant line-of-sight link between the ITS and the user equipment. We cast the per-block channel as a three-parameter model consisting of the channel amplitude, channel phase, and angle-of-arrival at the ITS. We exploit temporal correlation by updating the priors using the estimates from the previous block. Using only two pilots per coherence block alongside a targeted beam alignment strategy, the proposed method achieves precise channel tracking and attains spectral efficiency close to that achievable under perfect channel knowledge.

eess.SP↗

arXiv2026

From Antenna Abundance to Antenna Intelligence in 6G Gigantic MIMO Systems

Current cellular systems achieve high spectral efficiency through Massive MIMO, which leverages an abundance of antennas to create favorable propagation conditions for multiuser spatial multiplexing. Looking towards future networks, the extrapolation of this paradigm leads to systems with many hundreds of antennas per base station, raising concerns regarding hardware complexity, cost, and power consumption. This article suggests more intelligent array designs that reduce the need for excessive antenna numbers. We revisit classical uniform array design principles and explain how their uniform spatial sampling leads to unnecessary redundancies in practical deployment scenarios. By exploiting non-uniform sparse arrays with site-specific antenna placements -- based on either pre-optimized irregular arrays or real-time movable antennas -- we demonstrate how superior multiuser MIMO performance can be achieved with far fewer antennas. These principles are inspired by previous works on wireless localization. We explain and demonstrate numerically how these concepts can be adapted for communications to improve the average sum rate and similar metrics. The results suggest a paradigm shift for future antenna array design, where antenna intelligence replaces sheer antenna count. This opens new opportunities for efficient, adaptable, and sustainable Gigantic MIMO systems.

cs.IT↗

arXiv2025

Near-Field Beamfocusing, Localization, and Channel Estimation with Modular Linear Arrays

This paper investigates how near-field beamfocusing can be achieved using a modular linear array (MLA), composed of multiple widely spaced uniform linear arrays (ULAs). The MLA architecture extends the aperture length of a standard ULA without adding additional antennas, thereby enabling near-field beamfocusing without increasing processing complexity. Unlike conventional far-field beamforming, near-field beamfocusing enables simultaneous data transmission to multiple users at different distances in the same angular interval, offering significant multiplexing gains. We present a detailed mathematical analysis of the beamwidth and beamdepth achievable with the MLA and show that by appropriately selecting the number of antennas in each constituent ULA, ideal near-field beamfocusing can be realized. In addition, we propose a computationally efficient localization method that fuses estimates from each ULA, enabling efficient parametric channel estimation. Simulation results confirm the accuracy of the analytical expressions and that MLAs achieve near-field beamfocusing with a limited number of antennas, making them a promising solution for next-generation wireless systems.

eess.SP↗

arXiv2025

Optimizing Movable Antennas in Wideband Multi-User MIMO With Hardware Impairments

Movable antennas represent an emerging field in telecommunication research and a potential approach to achieving higher data rates in multiple-input multiple-output (MIMO) communications when the total number of antennas is limited. Most solutions and analyses to date have been limited to \emph{narrowband} setups. This work complements the prior studies by quantifying the benefit of using movable antennas in \emph{wideband} MIMO communication systems. First, we derive a novel uplink wideband system model that also accounts for distortion from transceiver hardware impairments. We then formulate and solve an optimization task to maximize the average sum rate by adjusting the antenna positions using particle swarm optimization. Finally, the performance with movable antennas is compared with fixed uniform arrays and the derived theoretical upper bound. The numerical study concludes that the data rate improvement from movable antennas over other arrays heavily depends on the level of hardware impairments, the richness of the multi-path environments, and the number of subcarriers. The present study provides vital insights into the most suitable use cases for movable antennas in future wideband systems.

cs.IT↗

arXiv2025

Spatial Frequencies and Degrees of Freedom: Their Roles in Near-Field Communications

As wireless technology begins to utilize physically larger arrays and/or higher frequencies, the transmitter and receiver will reside in each other's radiative near field. This fact gives rise to unusual propagation phenomena such as spherical wavefronts and beamfocusing, creating the impression that new spatial dimensions -- called degrees-of-freedom (DoF) -- can be exploited in the near field. However, this is a fallacy because the theoretically maximum DoF are already achievable in the far field. This paper sheds light on these issues by providing a tutorial on spatial frequencies, which are the fundamental components of wireless channels, and by explaining their role in characterizing the DoF in the near and far fields. In particular, we demonstrate how a single propagation path utilizes one spatial frequency in the far field and an interval of spatial frequencies in the near field. We explain how the array geometry determines the number of distinguishable spatial frequency bins and, thereby, the spatial DoF. We also describe how to model near-field multipath channels and their spatial correlation matrices. Finally, we discuss the research challenges and future directions in this field.

eess.SP↗

arXiv2025

Limited-Resolution Hybrid Analog-Digital Precoding Design Using MIMO Detection Methods

While fully-digital precoding achieves superior performance in massive MIMO systems, it comes with significant drawbacks in terms of computational complexity and power consumption, particularly when operating at millimeter-wave (mmWave) frequencies and beyond. Hybrid analog-digital architectures address this by reducing radio frequency (RF) chains while maintaining performance in sparse multipath environments. However, most hybrid precoder designs assume ideal, infinite-resolution analog phase shifters, which cannot be implemented in real systems. Another practical constraint is the limited fronthaul capacity between the baseband processor and array, implying that each entry of the digital precoder must be picked from a finite set of quantization labels. This paper proposes novel designs for the limited-resolution analog and digital precoders by exploiting two well-known MIMO symbol detection algorithms, namely sphere decoding (SD) and expectation propagation (EP). Unlike prior works that rely on heuristic or sub-optimal designs for the low-resolution hybrid precoder, the proposed transformative MIMO detection-inspired designs are able to achieve optimal and near-optimal solutions. The main objective is to minimize the Euclidean distance between the optimal fully-digital precoder and the hybrid precoder to minimize the degradation caused by the finite resolution of the analog and digital precoders. Taking an alternating optimization approach, we first apply the SD method to find the precoders in each iteration optimally. Then, we apply the lower-complexity EP method which finds a near-optimal solution at a reduced computational cost. The effectiveness of the proposed designs is validated through extensive numerical simulations, which demonstrate that both SD-based and EP-based hybrid precoding schemes significantly outperform widely-used sub-optimal approaches.

eess.SP↗

arXiv2025

Nonlinear Distortion Radiated from Large Arrays and Active Reconfigurable Intelligent Surfaces

Extremely large aperture arrays (ELAAs) and reconfigurable intelligent surfaces (RISs) are candidate enablers to realize connectivity goals for the sixth-generation (6G) wireless networks. For instance, ELAAs can provide orders-of-magnitude higher area throughput compared to what massive multiple-input multiple-output (MIMO) can deliver through spatial multiplexing, while RISs can improve the propagation conditions over wireless channels but a passively reflecting RIS must be large to be effective. Active RIS with amplifiers can deal with this issue. In this paper, we analyze the distortion generated by nonlinear amplifiers in both ELAAs and active RIS. We derive analytical expressions for the angular directions and depth of nonlinear distortion in both near-field and far-field channels. These insights are then used in a distortion-aware scheduling scheme that predicts the beamforming directions of the distortion and strategically allocates users in frequency to minimize its impact. Numerical results validate our theoretical analysis and compare distortion-aware and distortion-unaware scheduling methods, highlighting the benefits of accounting for nonlinearities. We conclude that nonlinearities can both create in-band and out-of-band distortion that is beamformed in entirely new directions and distances from the transmitter.

eess.SP↗

arXiv2025

Pre-Optimized Irregular Arrays versus Moveable Antennas in Multi-User MIMO Systems

Massive multiple-input multiple-output (MIMO) systems exploit the spatial diversity achieved with an array of many antennas to perform spatial multiplexing of many users. Similar performance can be achieved using fewer antennas if movable antenna (MA) elements are used instead. MA-enabled arrays can dynamically change the antenna locations, mechanically or electrically, to achieve maximum spatial diversity for the current propagation conditions. However, optimizing the antenna locations for each channel realization is computationally excessive, requires channel knowledge for all conceivable locations, and requires rapid antenna movements, thus making real-time implementation cumbersome. To overcome these challenges, we propose a pre-optimized irregular array (PIA) concept, where the antenna locations at the base station are optimized a priori for a given coverage area. The objective is to maximize the average sum rate and we take a particle swarm optimization approach to solve it. Simulation results show that PIA achieves performance comparable to MA-enabled arrays while outperforming traditional uniform arrays. Hence, PIA offers a fixed yet efficient array deployment approach without the complexities associated with MA-enabled arrays.

eess.SP↗

arXiv2025

A Novel Hybrid Precoder With Low-Resolution Phase Shifters and Fronthaul Capacity Limitation

In massive MIMO systems, fully digital precoding offers high performance but has significant implementation complexity and energy consumption, particularly at millimeter frequencies and beyond. Hybrid analog-digital architectures provide a practical alternative by reducing the number of radio frequency (RF) chains while retaining performance in spatially sparse multipath scenarios. However, most hybrid precoder designs assume ideal, infinite-resolution analog phase shifters, which are impractical in real-world scenarios. Another practical constraint is the limited fronthaul capacity between the baseband processor and array, implying that each entry of the digital precoder must be picked from a finite set of quantization labels. To minimize the sum rate degradation caused by quantized analog and digital precoders, we propose novel designs inspired by the sphere decoding (SD) algorithm. We demonstrate numerically that our proposed designs outperform traditional methods, ensuring minimal sum rate loss in hybrid precoding systems with low-resolution phase shifters and limited fronthaul capacity.

eess.SP↗

arXiv2024

Parametric Channel Estimation for RIS-Assisted Wideband Systems

A reconfigurable intelligent surface (RIS) alters the reflection of incoming signals based on the phase-shift configuration assigned to its elements. This feature can be used to improve the signal strength for user equipments (UEs), expand coverage, and enhance spectral efficiency in wideband communication systems. Having accurate channel state information (CSI) is indispensable to realize the full potential of RIS-aided wideband systems. Unfortunately, CSI is challenging to acquire due to the passive nature of the RIS elements, which cannot perform transmit/receive signal processing. Recently, a parametric maximum likelihood (ML) channel estimator has been developed and demonstrated excellent estimation accuracy. However, this estimator is designed for narrowband systems with no non-line-of-sight (NLOS) paths. In this paper, we develop a novel parametric ML channel estimator for RIS-assisted wideband systems, which can handle line-of-sight (LOS) paths in the base station (BS)-RIS and RIS-UE links as well as NLOS paths between the UE, BS, and RIS. We leverage the reduced subspace representation induced by the array geometry to suppress noise in unused dimensions, enabling accurate estimation of the NLOS paths. Our proposed algorithm demonstrates superior estimation performance for the BS-UE and RIS-UE channels, outperforming the existing ML channel estimator.

eess.SP↗

arXiv2024

Achieving Beamfocusing via Two Separated Uniform Linear Arrays

This paper investigates coordinated beamforming using a modular linear array (MLA), composed of a pair of physically separated uniform linear arrays (ULAs), treated as sub-arrays. We focus on how such setups can give rise to near-field effects in 6G networks without requiring many antennas. Unlike conventional far-field beamforming, near-field beamforming enables simultaneous data service to multiple users at different distances in the same angular direction, offering significant multiplexing gains. We present a detailed analysis, including analytical expressions of the beamwidth and beamdepth for the MLA. Our findings reveal that using the MLA approach, we can remove approximately 36% of the antennas in the ULA while achieving the same level of beamfocusing.

eess.SP↗

arXiv2024

Optimal Dual-Polarized Planar Arrays for Massive Capacity Over Point-to-Point MIMO Channels

Future wireless networks must provide ever higher data rates. The available bandwidth increases roughly linearly as we increase the carrier frequency, but the range shrinks drastically. This paper explores if we can instead reach massive capacities using spatial multiplexing over multiple-input multiple-output (MIMO) channels. In line-of-sight (LOS) scenarios, therank of the MIMO channel matrix depends on the polarization and antenna arrangement. We optimize the rank and condition number by identifying the optimal antenna spacing in dual-polarized planar antenna arrays with imperfect isolation. The result is sparely spaced antenna arrays that exploit radiative near-field properties. We further optimize the array geometry for minimum aperture length and aperture area, which leads to different configurations. Moreover, we prove analytically that for fixed-sized arrays, the MIMO rank grows quadratically with the carrier frequency in LOS scenarios, if the antennas are appropriately designed. Hence, MIMO technology contributes more to the capacity growth than the bandwidth. The numerical results show that massive data rates, far beyond 1 Tbps, can be reached both over fixed point-to-point links. It is also possible for a large base station to serve a practically-sized mobile device.

eess.SP↗

arXiv2024

Graph Neural Network-based End-to-End Learning for Multi-User MIMO Systems

End-to-end (E2E) learning has recently been proposed to jointly design the modulator and symbol detector by using deep neural networks (DNNs). However, existing schemes lack sufficient capability to cancel multi-user interference (MUI) in uplink multi-user multiple-input multiple-output (MU-MIMO) systems. In this paper, we propose a graph neural network (GNN)-based E2E learning scheme that employs a GNN-based modulator to generate learned constellation points, and a GNN-based detector to cancel MUI. They are jointly optimized to minimize the symbol error rate (SER) performance loss. Simulation results demonstrate that the proposed E2E outperforms existing schemes with a predefined modulator. Specifically, it achieves an approximate 2 dB gain in a high MUI environment and surpasses even the maximum-likelihood (ML) detector in a low MUI condition.

eess.SP↗

arXiv2024

Spatial Correlation Modeling and RS-LS Estimation of Near-Field Channels with Uniform Planar Arrays

Extremely large aperture arrays (ELAAs) can offer massive spatial multiplexing gains in the radiative near-field region in beyond 5G systems. While near-field channel modeling for uniform linear arrays has been extensively explored in the literature, uniform planar arrays-despite their advantageous form factor-have been somewhat neglected due to their more complex nature. Spatial correlation is crucial for non-line-of-sight channel modeling. Unlike far-field scenarios, the spatial correlation properties of near-field channels have not been thoroughly investigated. In this paper, we start from the fundamentals and develop a near-field spatial correlation model for arbitrary spatial scattering functions. Furthermore, we derive the lower dimensional subspace where the channel vectors can exist. It is based on prior knowledge of the three-dimensional coverage region where scattering clusters exists and we derive a tractable one-dimensional integral expression. This subspace is subsequently employed in a reduced-subspace least squares (RS-LS) estimation method for near-field channels, thereby enhancing performance over the traditional least squares estimator without the need for having full spatial correlation matrix knowledge.

eess.SP↗

arXiv2024

An Efficient Modified MUSIC Algorithm for RIS-Assisted Near-Field Localization

In this paper, we consider a single-anchor localization system assisted by a reconfigurable intelligent surface (RIS), where the objective is to localize multiple user equipments (UEs) placed in the radiative near-field region of the RIS by estimating their azimuth angle-of-arrival (AoA), elevation AoA, and distance to the surface. The three-dimensional (3D) locations can be accurately estimated via the conventional MUltiple SIgnal Classification (MUSIC) algorithm, albeit at the expense of tremendous complexity due to the 3D grid search. In this paper, capitalizing on the symmetric structure of the RIS, we propose a novel modified MUSIC algorithm that can efficiently decouple the AoA and distance estimation problems and drastically reduce the complexity compared to the standard 3D MUSIC algorithm. Additionally, we introduce a spatial smoothing method by partitioning the RIS into overlapping sub-RISs to address the rank-deficiency issue in the signal covariance matrix. We corroborate the effectiveness of the proposed algorithm via numerical simulations and show that it can achieve the same performance as 3D MUSIC but with much lower complexity.

eess.SP↗