arXiv subjects

Amadeu Griol

Publications and source records attributed to Amadeu Griol.

18 recordsLinked to original sources

arXiv2026

Boosting Sensing Performance through Near-Field Engineering in Low-Q Metasurfaces

Dielectric metasurfaces have introduced a new paradigm for substance detection by exploiting their resonant properties to enhance light-matter interaction. This enhancement can be used for sensing either through refractive index changes or through absorption-based mechanisms. Most works focus on high-quality factor resonators, aiming to increase field confinement in the vicinity of the resonant structure to improve sensitivity. In this work, we explore an alternative approach based on low-quality factor, fully dielectric metasurfaces, with engineered modes to enhance near-field concentration. We investigate different topologies that, despite their low-quality factors, achieve sensitivity and detection performance beyond what is typically reported for low-Q structures in the literature. This improvement is enabled by near-field engineering of the evanescent modes, allowing us to control the spatial distribution of the electromagnetic field and maximize its overlap with the analyte. Our results show that careful mode engineering provides a powerful strategy to boost sensing performance without relying on ultra-high-Q resonances.

physics.optics↗

arXiv2025

Nonvolatile reconfigurable polarization rotator at datacom wavelengths based on a Sb2Se3/Si waveguide

Silicon photonics has become a key platform for photonic integrated circuits (PICs) due to its high refractive index and compatibility with complementary metal-oxide-semiconductor manufacturing. However, the inherent birefringence in silicon waveguides requires efficient polarization management. Here, we report a reconfigurable polarization rotator (PR) using a Sb2Se3/Si waveguide operating at datacom wavelengths (1310 nm), providing nonvolatile switching with zero static power consumption. The polarization conversion relies on the interference of hybrid electric-magnetic (EH) modes, which can be reconfigured by changing the Sb2Se3 state between amorphous and crystalline. Our experimental device exhibits a polarization conversion efficiency (PCE) and a polarization extinction ratio (PER) as high as -0.08 dB and 17.65 dB, respectively, in a compact footprint of just 21$μ$m length. Therefore, the proposed reconfigurable PR offers a compact and energy-efficient solution for polarization management in silicon photonics, with potential applications in data communication networks and emerging applications benefiting from polarization information encodings, such as optical neural networks and quantum computing.

physics.optics↗

arXiv2024

Polarization-Insensitive Integration of Nanoparticle-on-a-Slit Cavities with Dielectric Waveguides for On-chip Surface Enhanced Raman Spectroscopy

Amongst the available plasmonic nanostructures, nanoparticle-on-a-mirror (NPoM) cavities - consisting of metal nanoparticles separated from a metal mirror by a molecular-size monolayer - provide the ultimate light confinement in gaps even below 1 nm. A variation of the NPoM cavity is the nanoparticle-on-a-slit (NPoS) configuration, where the nanoparticle is placed on a functionalized narrow slit created on a metal plate so that there are two nanometric-scale gaps for plasmonic localization. Interestingly, the NPoS cavity can also perform as a dual dipole antenna to localize both infrared and visible light, which is useful in molecular optomechanics. For many applications, it is desirable to integrate such cavities on a chip and provide access to (and collection from) the hot spots via photonic integrated waveguides. In this work, we propose, design, and experimentally demonstrate the efficient integration of NPoS plasmonic cavities with dielectric waveguides on a silicon-based chip. To this end, we use silicon-nitride slot waveguides and show that both the fundamental TE and TM modes can be used to drive the cavity, making our device polarization-independent. We demonstrate our concept by performing surface-enhanced Raman spectroscopy of BPT molecules on a chip fabricated by standard silicon fabrication tools mixed with the deterministic positioning of gold nanospheres on the gap of a plasmonic dipole antenna.

physics.optics↗

arXiv2024

Cascaded injection locking of optomechanical crystal oscillators

Optomechanical oscillators stand out as high-performance and versatile candidates for serving as reference clocks in sequential photonic integrated circuits. Indeed, they have the unique capability of simultaneously generating mechanical tones and optical signal modulations at frequencies determined by their geometrical design. In this context, the concept of synchronization introduces a powerful means to precisely coordinate the dynamics of multiple oscillators in a controlled manner, thus increasing efficiency and preventing errors in signal processing photonic systems or communication interfaces. In this work, we demonstrate the cascaded injection locking of a pair of silicon-based optomechanical crystal cavities to an external reference signal that subtly modulates the laser driving one of the oscillators. Both cavities interact solely through a weak mechanical link, making the extension of this synchronization mechanism to an increased number of optomechanical oscillators within a common chip more feasible than relying solely on optical interactions. Thus, the combination of the obtained results, supported by a numerical model, with remote optical injection locking schemes discussed in the literature, lays the groundwork for the distribution of reference signals within large networks of processing elements in future phonon-photon hybrid circuits.

physics.optics↗

arXiv2024

Optomechanical cavities based on epitaxial GaP on nominally (001)-oriented Si

Gallium phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 $^o$C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5 %, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities show optical quality factors between 10$^3$ and 10$^4$, and localized mechanical resonances at frequencies around 3.1 GHz. Both optical and mechanical resonances are close to those previously reported on crystalline GaP structures. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.

physics.optics↗

arXiv2023

Master-Slave synchronization of silicon optomechanical nanobeam oscillators by external feedback

The remote synchronization of oscillators is essential for improving the performance, efficiency, and reliability of various systems and technologies, ranging from everyday telecommunications to cutting-edge scientific research and emerging technologies. In this work, we unequivocally demonstrate a master-slave type of synchronization between two self-sustained optomechanical crystal oscillators that interact solely through an external optical feedback stage. Several pieces of experimental evidence rule out the possibility of resonant forcing, and, in contrast to previous works, indicate that synchronization is achieved in the regime of natural dynamics suppression. Our experimental results are in agreement with the predictions of a numerical model describing the specific mechanical lasing dynamics of each oscillator and the unidirectional interaction between them. The outcomes of our study pave the way toward the synchronization of clock signals corresponding to far-placed processing elements in a future synchronous photonic integrated circuit.

physics.optics↗

arXiv2022

Engineering multiple GHz mechanical modes in optomechanical crystal cavities

Optomechanical crystal cavities (OMCCs) are fundamental nanostructures for a wide range of phenomena and applications. Usually, optomechanical interaction in such OMCCs is limited to a single optical mode and a unique mechanical mode. In this sense, eliminating the single mode constraint - for instance, by adding more mechanical modes - should enable more complex physical phenomena, giving rise to a context of multimode optomechanical interaction. However, a general method to produce in a controlled way multiple mechanical modes with large coupling rates in OMCCs is still missing. In this work, we present a route to confine multiple GHz mechanical modes coupled to the same optical field with similar optomechanical coupling rates - up to 600 kHz - by OMCC engineering. In essence, we increase the number of unit cells (consisting of a silicon nanobrick perforated by a circular holes with corrugations at its both sides) in the adiabatic transition between the cavity center and the mirror region. Remarkably, the mechanical modes in our cavities are located within a full phononic bandgap, which is a key requirement to achieve ultra high mechanical Q factors at cryogenic temperatures. The multimode bevavior in a full phononic bandgap and the easiness of realization using standard silicon nanotechnology make our OMCCs highly appealing for applications in the classical and quantum realms.

physics.optics↗

arXiv2022

Experimental observation of higher-order anapoles in individual silicon disks under in-plane illumination

Anapole states - characterized by a strong suppression of far-field scattering - naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we go a step further and report on the observation of higher-order (magnetic and second-order electric) anapole states in individual silicon disks under in-plane illumination. To do so, we increase the disk dimensions (radius and thickness) so that such anapoles occur at telecom wavelengths. Experiments show dips in the far-field scattering perpendicular to the disk plane at the expected wavelengths and the selected polarizations, which we interpret as a signature of high-order anapoles. Some differences between normal and in-plane excitation are discussed, in particular the non-cancellation of the sum of the Cartesian electric and toroidal moments for in-plane incidence. Our results pave the way towards the use of different anapole states in photonic integrated circuits, either on silicon or other high-index dielectric materials.

physics.optics↗

arXiv2022

Testing optomechanical microwave oscillators for SATCOM application

The realization of photonic microwave oscillators using optomechanical cavities has recently become a reality. By pumping the cavity with a blue-detuned laser, the so-called phonon lasing regime - in which a mechanical resonance is amplified beyond losses - can be reached and the input signal gets modulated by highly-coherent tones at integer multiples of the mechanical resonance. \textcolor{Red}{Implementing optomechanical cavities on released films with high index of refraction can lead to optical modes at telecom wavelengths and mechanical resonances in the GHz scale, resulting in highly-stable signals in the microwave domain upon photodetection}. Owing to the extreme compactness of such cavities, application in satellite communications (SATCOM) seems highly appropriate, but no experiments have been reported so far. In this paper, an optomechanical microwave oscillator (OMO) built on a micron-scale silicon optomechanical crystal cavity is characterized and tested in a real SATCOM testbed. Using a blue-detuned laser, the OMO is driven into a phonon lasing state where multiple harmonics are generated, reaching tones up to 20 GHz. Under this regime, its practical applicability, remarkably addressing its performance as a photonic local oscillator, has been validated. The results, in addition with the advantages of extreme compactness and silicon-technology compatibility, make OMOs very promising candidates to build \textcolor{Red}{ultra-low} weight photonics-based microwave oscillators for SATCOM applications.

physics.app-ph↗

arXiv2021

Photonic Frequency Conversion of OFDM Microwave Signals in a Wavelength-Scale Optomechanical Cavity

Optomechanical (OM) cavities enable coupling of near-infrared light and GHz-frequency acoustic waves in wavelength-scale volumes. When driven in the phonon lasing regime, an OM cavity can perform simultaneously as a nonlinear mixer and a local oscillator -- at integer multiples of the mechanical resonance frequency -- in the optical domain. In this work, we use this property to demonstrate all-optical frequency down- and up-conversion of MHz-bandwidth orthogonal frequency division multiplexed signals compliant with the IEEE 802.16e WiMAX wireless standard at microwave frequencies. To this end, we employ a silicon OM crystal cavity (OMCC), supporting a breathing-like mechanical resonance at $f_m\approx$ 3.9 GHz and having a foot-print $\approx$ 10 $μ$m$^{2}$, which yields frequency conversion efficiencies better than -17 dB in both down- and up-conversion processes at mW-scale driving power. This work paves the way towards the application of OMCCs in low-power all-photonic processing of digitally-modulated microwave signals in miniaturized silicon photonics chips.

physics.optics↗

arXiv2021

Thermal properties of nanocrystalline silicon nanobeams

Controlling thermal energy transfer at the nanoscale has become critically important in many applications and thermal properties since it often limits device performance. In this work, we study the effects on thermal conductivity arising from the nanoscale structure of free-standing nanocrystalline silicon films and the increasing surface-to-volume ratio when fabricated into suspended optomechanical nanobeams. We characterize thermal transport in structures with different grain sizes and elucidate the relative impact of grain size and geometrical dimensions on thermal conductivity. We use a micro-time-domain thermoreflectance method to study the impact of the grain size distribution, from 10 to 400 nm, on the thermal conductivity in free-standing nanocrystalline silicon films considering surface phonon and grain boundary scattering. We find a drastic reduction in the thermal conductivity, down to values of 10 W.m^{-1}.K^{-1} and below, which is just a fraction of the conductivity of single crystalline silicon. Decreasing the grain size further decreases the thermal conductivity. We also observe that this effect is smaller in OM nanostructures than in membranes due to the competition of surface scattering in decreasing thermal conductivity. Finally, we introduce a novel versatile contactless characterization technique that can be adapted to any structure supporting a thermally shifted optical resonance and use it to evaluate the thermal conductivity. This method can be used with optical resonances exhibiting different mode profiles and the data is shown to agrees quantitatively with the thermoreflectance measurements. This work opens the way to a more generalized thermal characterization of optomechanical cavities and to create hot-spots with engineered shapes at desired position in the structures as a means to study thermal transport in coupled photon-phonon structures.

physics.app-ph↗

arXiv2020

Injection locking in an optomechanical coherent phonon source

Spontaneous locking of the phase of a coherent phonon source to an external reference is demonstrated in an optomechanical oscillator based on a self-triggered free-carrier/temperature limit cycle. Synchronization is observed when the pump laser driving the mechanical oscillator to a self-sustained state is modulated by a radiofrequency tone. We employ a pump-probe phonon detection scheme based on an independent optical cavity to observe only the mechanical oscillator dynamics. The lock range of the oscillation frequency, i.e., the Arnold tongue, is experimentally determined over a range of external reference strengths, evidencing the possibility to tune the oscillator frequency for a range up to 350 kHz. The stability of the coherent phonon source is evaluated via its phase noise, with a maximum achieved suppression of 44 dBc/Hz at 1kHz offset for a 100 MHz mechanical resonator. Introducing a weak modulation in the excitation laser reveals as a further knob to trigger, control and stabilise the dynamical solutions of self-pulsing based optomechanical oscillators, thus enhancing their potential as acoustic wave sources in a single layer silicon platform.

physics.optics↗

arXiv2020

Properties of Nanocrystalline Silicon Probed by Optomechanics

Nanocrystalline materials exhibit properties that can differ substantially from those of their single crystal counterparts. As such, they provide ways to enhance and optimise their functionality for devices and applications. Here we report on the optical, mechanical and thermal properties of nanocrystalline silicon probed by means of optomechanical nanobeams to extract information of the dynamics of optical absorption, mechanical losses, heat generation and dissipation. The optomechanical nanobeams are fabricated using nanocrystalline films prepared by annealing amorphous silicon layers at different temperatures. The resulting crystallite sizes and the stress in the films can be controlled by the annealing temperature and time and, consequently, the properties of the films can be tuned relatively freely, as demonstrated here by means of electron microscopy and Raman scattering. We show that the nanocrystallite size and the volume fraction of the grain boundaries play a key role in the dissipation rates through non-linear optical and thermal processes. Promising optical (13000) and mechanical (1700) quality factors were found in the optomechanical cavity realised in the nanocrystalline Si resulting from annealing at 950 C. The enhanced absorption and recombination rates via the intra-gap states and the reduced thermal conductivity boost the potential to exploit these non-linear effects in applications, including NEMS, phonon lasing and chaos-based devices.

physics.app-ph↗

arXiv2019

Microwave generation and frequency comb in a silicon optomechanical cavity with a full phononic bandgap

Cavity optomechanics has become a powerful tool to manipulate mechanical motion via optical fields. When driving an optomechanical cavity with blue-detuned laser the mechanical motion is amplified, ultimately resulting in phonon lasing. In this work, we show that a silicon optomechanical crystal cavity can be used as an optoelectronic oscillator when driven to the phonon lasing condition. To this end, we use an optomechanical cavity designed to have a breathing-like mechanical mode vibrating at $Ω_{m}/2π=$3.897 GHz in a full phononic bandgap. Our measurements show that the first harmonic displays a phase noise of -100 dBc/Hz at 100 kHz, which is a considerable value for a free running oscillator. Stronger blue-detuned driving leads eventually to the formation of an optomechanical frequency comb, with lines spaced by the mechanical frequency. We also measure the phase noise for higher-order harmonics and show that, unlike in Brillouin oscillators, the noise is increased as corresponding to classical harmonic mixing. Finally, we present real-time measurements of the comb waveform and show that it can be adjusted to a theoretical model recently presented. Our results suggest that silicon optomechanical cavities could be relevant elements in microwave photonics and optical RF processing, in particular in disciplines requiring low-weight, compactness and fiber interconnection.

physics.optics↗

arXiv2016

Experimental measurement of plasmonic nanostructures embedded in silicon waveguide gaps

In this work, we report numerical simulations and experiments of the optical response of a gold nanostrip embedded in a silicon strip waveguide gap at telecom wavelengths. We show that the spectral features observed in transmission and reflection when the metallic nanostructure is inserted in the gap are extremely different to those observed in free-space excitation. First, we find that interference between the guided field and the electric dipolar resonance of the metallic nanostructure results in high-contrast (> 10) spectral features showing an asymmetric Fano spectral profile. Secondly, we reveal a crossing in the transmission and reflection responses close to the nanostructure resonance wavelength as a key feature of our system. This approach, which can be realized using standard semiconductor nanofabrication tools, could lead to fully exploit the extreme properties of subwavelength metallic nanostructures in an on-chip configuration, with special relevance in fields such as biosensing or optical switching.

physics.optics↗

arXiv2015

Universal method for the synthesis of arbitrary polarization states radiated by a nanoantenna

Optical nanoantennas efficiently convert confined optical energy into free-space radiation. The polarization of the emitted radiation depends mainly on nanoantenna shape, so it becomes extremely difficult to manipulate it unless the nanostructure is physically altered. Here we demonstrate a simple way to synthetize the polarization of the radiation emitted by a single nanoantenna so that every point on the Poincaré sphere becomes attainable. The nanoantenna consists of a single scatterer created on a dielectric waveguide and fed from its both sides so that the polarization of the emitted optical radiation is controlled by the amplitude and phase of the feeding signals. Our nanoantenna is created on a silicon chip using standard top-down nanofabrication tools, but the method is universal and can be applied to other materials, wavelengths and technologies. This work will open the way towards the synthesis and control of arbitrary polarization states in nano-optics.

physics.optics↗

arXiv2014

A self-stabilized coherent phonon source driven by optical forces

Optical forces can set tiny objects into states of coherent mechanical oscillation, also known as mechanical or phonon lasing. We present a novel pumping mechanism in an opto-mechanical photonic crystal that realizes mechanical lasing with relaxed requirements for the optical-mechanical modes and their inter-coupling. It derives from a spontaneously triggered thermal/free carrier self-pulsing and the anharmonic modulation of the radiation pressure force that comes as a consequence. Moreover, the feedback of the mechanics on the self-pulsing frequency-entrains both oscillators, creating a self-stabilized indecomposable system. A manifold of frequency-entrained regions with two different mechanical modes (at 54 and 122 MHz) are observed as a result of the wide tuneability of the natural frequency of the self-pulsing. The system operates at ambient conditions of pressure and temperature in a silicon compatible platform, which enables its exploitation in sensing, intra-chip metrology or time-keeping applications.

physics.optics↗

arXiv2013

Sorting polarized photons with a single scatterer

Intuitively, light impinging on a spatially symmetric object will be scattered symmetrically. This intuition can fail at the nanoscale if the polarization of the incoming light is properly tailored. In fact, it has been demonstrated that near-field interference can result in the unidirectional excitation of plasmonic modes using circularly polarized light. Here we show that linearly-polarized photons impinging on a single spatially-symmetric scatterer created in a silicon waveguide are guided into a certain direction of the waveguide depending exclusively on their polarization angle. Reciprocity implies that the scatterer can also act as a two-input dielectric nanoantenna radiating two different linear polarizations. Our work broadens the scope of near-field interference beyond plasmonics, with applications in polarization (de)multiplexing, unidirectional coupling, directional switching, radiation polarization control, and polarization-encoded quantum information processing in photonic integrated circuits.

physics.optics↗