arXiv subjects

Amanda E. Seedhouse

Publications and source records attributed to Amanda E. Seedhouse.

11 recordsLinked to original sources

arXiv2026

Optimal operating temperature for industry-compatible silicon spin quantum computing: colder is not necessarily better

Silicon spin qubits are a leading candidate for large-scale quantum computing owing to their compatibility with semiconductor manufacturing. However, scaling to useful fault-tolerant processors will likely generate thermal loads that exceed the cooling power available at millikelvin temperatures. Raising the operating temperature eases cooling requirements but reduces gate fidelity, increasing the overhead of quantum error correction. Identifying the operating temperature that minimizes total power consumption is therefore a key challenge for commercially viable quantum computers. Here, we use gate set tomography to benchmark two-qubit silicon chips fabricated in both industrial and academic environments over a range of temperatures. Elevated temperatures substantially shorten coherence times and increase gate and state-preparation-and-measurement infidelities. Based on these measurements, we develop a general power model for silicon quantum computers that combines cryogenic cooling requirements with error-correction overheads. We show that a finite optimal operating temperature exists and is strongly influenced by a crossover temperature near 1 K in current devices, above which gate fidelity degrades rapidly. These results connect device-level fidelity limitations to system-level power requirements, providing design guidelines for large-scale silicon quantum computers.

quant-ph↗

arXiv2025

Wavelet correlation noise analysis for qubit operation variable time series

In quantum computing, characterizing the full noise profile of qubits can aid in increasing coherence times and fidelities by developing error-mitigating techniques specific to the noise present. This characterization also supports efforts in advancing device fabrication to remove sources of noise. Qubit properties can be subject to non-trivial correlations in space and time, for example, spin qubits in MOS quantum dots are exposed to noise originating from the complex glassy behavior of two-level fluctuator ensembles. Engineering progress in spin qubit experiments generates large amounts of data, necessitating analysis techniques from fields experienced in managing large data sets. Fields such as astrophysics, finance, and climate science use wavelet-based methods to enhance their data analysis. Here, we propose and demonstrate wavelet-based analysis techniques to decompose signals into frequency and time components, enhancing our understanding of noise sources in qubit systems by identifying features at specific times. We apply the analysis to a state-of-the-art two-qubit experiment in a pair of SiMOS quantum dots with feedback applied to relevant operation variables. The observed correlations serve to identify common microscopic causes of noise, such as two-level fluctuators and hyperfine coupled nuclei, as well as to elucidate pathways for multi-qubit operation with more scalable feedback systems.

quant-ph↗

arXiv2024

Assessment of error variation in high-fidelity two-qubit gates in silicon

Achieving high-fidelity entangling operations between qubits consistently is essential for the performance of multi-qubit systems and is a crucial factor in achieving fault-tolerant quantum processors. Solid-state platforms are particularly exposed to errors due to materials-induced variability between qubits, which leads to performance inconsistencies. Here we study the errors in a spin qubit processor, tying them to their physical origins. We leverage this knowledge to demonstrate consistent and repeatable operation with above 99% fidelity of two-qubit gates in the technologically important silicon metal-oxide-semiconductor (SiMOS) quantum dot platform. We undertake a detailed study of these operations by analysing the physical errors and fidelities in multiple devices through numerous trials and extended periods to ensure that we capture the variation and the most common error types. Physical error sources include the slow nuclear and electrical noise on single qubits and contextual noise. The identification of the noise sources can be used to maintain performance within tolerance as well as inform future device fabrication. Furthermore, we investigate the impact of qubit design, feedback systems, and robust gates on implementing scalable, high-fidelity control strategies. These results are achieved by using three different characterization methods, we measure entangling gate fidelities ranging from 96.8% to 99.8%. Our analysis tools identify the causes of qubit degradation and offer ways understand their physical mechanisms. These results highlight both the capabilities and challenges for the scaling up of silicon spin-based qubits into full-scale quantum processors.

quant-ph↗

arXiv2023

Entangling gates on degenerate spin qubits dressed by a global field

Coherently dressed spins have shown promising results as building blocks for future quantum computers owing to their resilience to environmental noise and their compatibility with global control fields. This mode of operation allows for more amenable qubit architecture requirements and simplifies signal routing on the chip. However, multi-qubit operations, such as qubit addressability and two-qubit gates, are yet to be demonstrated to establish global control in combination with dressed qubits as a viable path to universal quantum computing. Here we demonstrate simultaneous on-resonance driving of degenerate qubits using a global field while retaining addressability for qubits with equal Larmor frequencies. Furthermore, we implement SWAP oscillations during on-resonance driving, constituting the demonstration of driven two-qubit gates. Significantly, our findings highlight the fragility of entangling gates between superposition states and how dressing can increase the noise robustness. These results represent a crucial milestone towards global control operation with dressed qubits. It also opens a door to interesting spin physics on degenerate spins.

cond-mat.mes-hall↗

arXiv2023

Real-time feedback protocols for optimizing fault-tolerant two-qubit gate fidelities in a silicon spin system

Recently, several groups have demonstrated two-qubit gate fidelities in semiconductor spin qubit systems above 99%. Achieving this regime of fault-tolerant compatible high fidelities is nontrivial and requires exquisite stability and precise control over the different qubit parameters over an extended period of time. This can be done by efficiently calibrating qubit control parameters against different sources of micro- and macroscopic noise. Here, we present several single- and two-qubit parameter feedback protocols, optimised for and implemented in state-of-the-art fast FPGA hardware. Furthermore, we use wavelet-based analysis on the collected feedback data to gain insight into the different sources of noise in the system. Scalable feedback is an outstanding challenge and the presented implementation and analysis gives insight into the benefits and drawbacks of qubit parameter feedback, as feedback related overhead increases. This work demonstrates a pathway towards robust qubit parameter feedback and systematic noise analysis, crucial for mitigation strategies towards systematic high-fidelity qubit operation compatible with quantum error correction protocols.

quant-ph↗

arXiv2023

High-fidelity operation and algorithmic initialisation of spin qubits above one kelvin

The encoding of qubits in semiconductor spin carriers has been recognised as a promising approach to a commercial quantum computer that can be lithographically produced and integrated at scale. However, the operation of the large number of qubits required for advantageous quantum applications will produce a thermal load exceeding the available cooling power of cryostats at millikelvin temperatures. As the scale-up accelerates, it becomes imperative to establish fault-tolerant operation above 1 kelvin, where the cooling power is orders of magnitude higher. Here, we tune up and operate spin qubits in silicon above 1 kelvin, with fidelities in the range required for fault-tolerant operation at such temperatures. We design an algorithmic initialisation protocol to prepare a pure two-qubit state even when the thermal energy is substantially above the qubit energies, and incorporate radio-frequency readout to achieve fidelities up to 99.34 per cent for both readout and initialisation. Importantly, we demonstrate a single-qubit Clifford gate fidelity of 99.85 per cent, and a two-qubit gate fidelity of 98.92 per cent. These advances overcome the fundamental limitation that the thermal energy must be well below the qubit energies for high-fidelity operation to be possible, surmounting a major obstacle in the pathway to scalable and fault-tolerant quantum computation.

quant-ph↗

arXiv2023

Improved Single-Shot Qubit Readout Using Twin RF-SET Charge Correlations

High fidelity qubit readout is critical in order to obtain the thresholds needed to implement quantum error correction protocols and achieve fault-tolerant quantum computing. Large-scale silicon qubit devices will have densely-packed arrays of quantum dots with multiple charge sensors that are, on average, farther away from the quantum dots, entailing a reduction in readout fidelities. Here, we present a readout technique that enhances the readout fidelity in a linear SiMOS 4-dot array by amplifying correlations between a pair of single-electron transistors, known as a twin SET. By recording and subsequently correlating the twin SET traces as we modulate the dot detuning across a charge transition, we demonstrate a reduction in the charge readout infidelity by over one order of magnitude compared to traditional readout methods. We also study the spin-to-charge conversion errors introduced by the modulation technique, and conclude that faster modulation frequencies avoid relaxation-induced errors without introducing significant spin flip errors, favouring the use of the technique at short integration times. This method not only allows for faster and higher fidelity qubit measurements, but it also enhances the signal corresponding to charge transitions that take place farther away from the sensors, enabling a way to circumvent the reduction in readout fidelities in large arrays of qubits.

cond-mat.mes-hall↗

arXiv2023

Accessing the Full Capabilities of Filter Functions: A Tool for Detailed Noise and Control Susceptibility Analysis

The filter function formalism from quantum control theory is typically used to determine the noise susceptibility of pulse sequences by looking at the overlap between the filter function of the sequence and the noise power spectral density. Importantly, the square modulus of the filter function is used for this method, hence directional and phase information is lost. In this work, we take advantage of the full filter function including directional and phase information. By decomposing the filter function with phase preservation before taking the modulus, we are able to consider the contributions to $x$-, $y$- and $z$-rotation separately. Continuously driven systems provide noise protection in the form of dynamical decoupling by cancelling low-frequency noise, however, generating control pulses synchronously with an arbitrary driving field is not trivial. Using the decomposed filter function we look at the controllability of a system under arbitrary driving fields, as well as the noise susceptibility, and also relate the filter function to the geometric formalism.

quant-ph↗

arXiv2021

Implementation of the SMART protocol for global qubit control in silicon

Quantum computing based on spins in the solid state allows for densely-packed arrays of quantum bits. While high-fidelity operation of single qubits has been demonstrated with individual control pulses, the operation of large-scale quantum processors requires a shift in paradigm towards global control solutions. Here we report the experimental implementation of a new type of qubit protocol - the SMART (Sinusoidally Modulated, Always Rotating and Tailored) protocol. As with a dressed qubit, we resonantly drive a two-level system with a continuous microwave field, but here we add a tailored modulation to the dressing field to achieve increased robustness to detuning noise and microwave amplitude fluctuations. We implement this new protocol to control a single spin confined in a silicon quantum dot and confirm the optimal modulation conditions predicted from theory. Universal control of a single qubit is demonstrated using modulated Stark shift control via the local gate electrodes. We measure an extended coherence time of $2$ ms and an average Clifford gate fidelity $>99$ $\%$ despite the relatively long qubit gate times ($>15$ $\unicode[serif]{x03BC}$s, $20$ times longer than a conventional square pulse gate), constituting a significant improvement over a conventional spin qubit and a dressed qubit. This work shows that future scalable spin qubit arrays could be operated using global microwave control and local gate addressability, while maintaining robustness to relevant experimental inhomogeneities.

cond-mat.mes-hall↗

arXiv2021

The SMART protocol -- Pulse engineering of a global field for robust and universal quantum computation

Global control strategies for arrays of qubits are a promising pathway to scalable quantum computing. A continuous-wave global field provides decoupling of the qubits from background noise. However, this approach is limited by variability in the parameters of individual qubits in the array. Here we show that by modulating a global field simultaneously applied to the entire array, we are able to encode qubits that are less sensitive to the statistical scatter in qubit resonance frequency and microwave amplitude fluctuations, which are problems expected in a large scale system. We name this approach the SMART (Sinusoidally Modulated, Always Rotating and Tailored) qubit protocol. We show that there exist optimal modulation conditions for qubits in a global field that robustly provide improved coherence times. We discuss in further detail the example of spins in silicon quantum dots, in which universal one- and two-qubit control is achieved electrically by controlling the spin-orbit coupling of individual qubits and the exchange coupling between spins in neighbouring dots. This work provides a high-fidelity qubit operation scheme in a global field, significantly improving the prospects for scalability of spin-based quantum computer architectures.

quant-ph↗

arXiv2021

Quantum Computation Protocol for Dressed Spins in a Global Field

Spin qubits are contenders for scalable quantum computation because of their long coherence times demonstrated in a variety of materials, but individual control by frequency-selective addressing using pulsed spin resonance creates severe technical challenges for scaling up to many qubits. This individual resonance control strategy requires each spin to have a distinguishable frequency, imposing a maximum number of spins that can be individually driven before qubit crosstalk becomes unavoidable. Here we describe a complete strategy for controlling a large array of spins in quantum dots dressed by an on-resonance global field, namely a field that is constantly driving the spin qubits, to dynamically decouple from the effects of background magnetic field fluctuations. This approach -- previously implemented for the control of single electron spins bound to electrons in impurities -- is here harmonized with all other operations necessary for universal quantum computing with spins in quantum dots. We define the logical states as the dressed qubit states and discuss initialization and readout utilizing Pauli spin blockade, as well as single- and two-qubit control in the new basis. Finally, we critically analyze the limitations imposed by qubit variability and potential strategies to improve performance.

quant-ph↗