SearcharxivSearch

arXiv subjects

Amartya Chakrabortty

Publications and source records attributed to Amartya Chakrabortty.

8 recordsLinked to original sources

Navier-Stokes-Cahn-Hilliard system in a $3$D perforated domain with free slip and source term: Existence and homogenization

We study a time-dependent Navier--Stokes--Cahn--Hilliard system for a binary incompressible mixture in a periodically perforated domain $Ω_p^\varepsilon\subset\mathbb{R}^3$. The obstacles have diameter of order $\varepsilon^α$, with $α>3$, and mutual distance of order $\varepsilon$. Hence $\varepsilon^α/\varepsilon^3\to0$, which corresponds to the subcritical dilute regime. The model includes a periodically oscillating viscosity tensor, a nonconservative source term in the Cahn--Hilliard equation, no-slip conditions on the outer boundary, and free-slip conditions on the obstacle surfaces. The capillary coefficient $λ^\varepsilon>0$ depends on $\varepsilon$. For every fixed $\varepsilon>0$, we prove existence of a weak solution and derive estimates uniform in $\varepsilon$ with explicit $λ^\varepsilon$-scaling. Assuming $λ^\varepsilon\toλ\in[0,\infty)$, we derive the homogenized system on the whole domain. The subcritical obstacles leave no additional resistance term, and the cell problems are posed on the full periodic cell. The scalar correctors vanish, so the scalar diffusion operators remain unchanged, while the oscillating viscosity gives a time-dependent effective viscosity tensor. If $λ=0$, the limit decouples into an effective unsteady Stokes system and a Cahn--Hilliard system with source. If $λ>0$, the limit retains the Navier--Stokes--Cahn--Hilliard coupling, with convection, phase transport, and capillary forcing weighted by $\sqrtλ$. We also prove convergence of the time-integrated normalized microscopic energy to the corresponding macroscopic energy.

math.AP

Multiscale Analysis of a Landau--de Gennes Model for Nematic thin-film composites

We study the simultaneous limits of homogenisation $(\varepsilon\to0)$ and dimension reduction $(h\to0)$ for thin heterogeneous nematic liquid crystal films in the Landau--de Gennes $Q$-tensor framework. The elastic energy density is governed by a tensor $\mathbf{A}(x'/\varepsilon,x_3/h)$ that is periodic in the in-plane fast variable and measurable in the normalised thickness variable. Surface anchoring on the top and bottom faces is modelled by a weak anchoring energy of strength $h^γ$, $γ\geq0$, in a general set-valued framework covering the principal classical anchoring geometries. The simultaneous limit reveals two principal features. First, the anchoring scaling yields a hierarchy of effective behaviours depending on $γ$: a hard constraint $\mathcal{Q}\in H^1(ω;\mathscr{A})$ for $0\leqγ<1$, a finite surface density contribution for $γ=1$, and vanishing anchoring for $γ>1$. For $0\leq γ<1$ with uniaxial anchoring, the homogenised energy reduces on the constrained class to anisotropic Oseen--Frank and Ericksen energies. Second, the effective elastic response depends on the scale ratio $ρ=\lim h/\varepsilon\in[0,\infty]$: each regime has a distinct corrector structure and yields a two-dimensional LdG energy with homogenised tensor $\mathbf{A}^{\mathrm{hom}}_ρ$, characterised by a regime-dependent cell problem. To the best of our knowledge, this is the first rigorous treatment of the simultaneous homogenisation and dimension reduction limit for the Landau--de Gennes energy, and the first in which the anchoring strength enters as a scaling parameter, producing a hierarchy of qualitatively distinct effective models.

math.AP

Quantitative Homogenization of a Cahn--Hilliard System with Source Term in Periodically Perforated Domains

We study qualitative and quantitative homogenization for a Cahn--Hilliard system with a nonconservative source term in a periodically perforated domain. Using the periodic unfolding method, we derive uniform energy estimates and prove convergence to a homogenized Cahn--Hilliard system whose effective diffusion tensor is characterized by scalar Neumann cell problems on the pore cell. For the quantitative analysis, we construct first-order corrector approximations by means of a scale-splitting operator, so that the cell correctors are only required to belong to $H^1_{\mathrm{per}}(Y_p)$. Under $H^2$-regularity of the homogenized solution and well-prepared initial data, we obtain an order $\varepsilon^{1/2}$ corrector estimate: the corrected order-parameter error is controlled in $L^2(0,T;H^1(Ω_p^\varepsilon))$, while the uncorrected order parameter is controlled in $L^2(0,T;L^2(Ω_p^\varepsilon))$. This improves the rate $\varepsilon^{1/4}$ previously established for fourth-order phase-field equations in perforated media, and matches the natural rate for second-order elliptic problems in perforated domains. The rate reflects the boundary layer caused by incomplete cells near $\partialΩ$ and improves to order $\varepsilon$ on the flat torus $\mathbb{T}^d$.

math.AP

Homogenization of an optimal control problem for nonlocal semilinear elasticity with soft inclusions

This paper investigates the asymptotic analysis of an optimal control problem (OCP) posed on a high-contrast elastic medium with soft periodic inclusions, governed by a semilinear elasticity system with a nonlocal term. The domain consists of a connected matrix phase and a soft inclusion phase. The model depends on two independent small parameters: the periodicity $\varepsilon>0$ and the contrast $δ>0$, and the distributed control acts only in the inclusion region. We consider an $L^2$-tracking cost on the displacement and analyze the limit as $(\varepsilon,δ)\to(0,0)$ in the regime \[ \lim_{(\varepsilon,δ)\to(0,0)}\fracδ{\varepsilon}=κ\in(0,+\infty]. \] First, we derive the homogenized (limit) state system associated with this scaling. We then formulate the limit OCP and prove that the limit of the microscopic optimal controls is an optimal control for the limit problem, using a $Γ$-convergence approach.

math.AP

Homogenization of a thin linear elastic plate reinforced with a periodic mosaic of small rigid plates

In the framework of linearized elasticity, we study thin elastic composite plates with thickness $δ$. The plates contain small, rigid rectangular plates distributed periodically along $\varepsilon$. Between two neighboring rigid plates is an elastic beam with thickness $δ< \varepsilon/3 < 1$. Through a simultaneous process of homogenization and dimension reduction, we obtain the limit model. Our analysis yields Korn-type inequalities adapted to the rigid-elastic geometry of the structure and provides a precise characterization of the limit deformation and displacement fields. In the $2$D limit problem, the bending is the sum of two functions, each depending on only one variable. This is due to the fact that the mixed derivatives of the outer-plane displacement vanish. Finally, the limiting 2D problem is two decoupled plates or strips, each one with just three degrees of freedom: shear along the strip axis, the cross-contraction (-extension), and the cross-bending. The corresponding correctors are defined in the same way in the periodicity cell. In the linearized setting, all the correctors are decomposed.

math.AP

Homogenization, dimension reduction and linearization of thin elastic plate

This paper investigates the homogenization, dimension reduction, and linearization of a composite plate subjected to external loading within the framework of non-linear elasticity problem. The total elastic energy of the problem is of order $\sim h^2\varepsilon^{2a+3}$, where $a\geq1$. The paper is divided into two parts: The first part presents the simultaneous homogenization, dimension reduction and linearization ($(\varepsilon,h)\to(0,0)$) of a composite plate without any coupling assumption of $\varepsilon$ and $h$. The second part consists of the rigorous derivation of linearized elasticity as a limit of non-linear elasticity with small deformation and external loading conditions. The results obtained demonstrate that the limit energy remains unchanged when the first linearization ($h\to 0$) is performed, followed by simultaneous homogenization dimension reduction ($\varepsilon\to0$) and when both limits approach zero simultaneously, i.e. $(\varepsilon,h)\to (0,0)$. The exact form of the limit energy(s) is obtained through the decomposition of plate deformations and plate displacements. By using the $Γ$-convergence technique, the existence of a unique solution for the limit linearized homogenized energy problem is demonstrated. These results are then extended to certain periodic perforated plates.

math.AP

Mathematical modelling and homogenization of thin fiber-reinforced hydrogels

This work considers simultaneous homogenization dimension reduction of a poroelastic model for thin fiber-reinforced hydrogels. The analysed medium is defined as a two-component system consisting of a continuous fiber framework with hydrogel inclusions arranged periodically throughout. The fibers are assumed to operate under quasi-stationary linear elasticity, whereas the hydrogel's hydromechanical behavior is represented using Biot's linear poroelasticity model. The asymptotic limit of the coupled system is established when the periodicity and thickness parameters are of the same order and tend to zero simultaneously, utilizing the re-scaling unfolding operator. It is demonstrated that the limit displacement exhibits Kirchhoff-Love-type behavior using the decomposition of plate displacements. Towards the end, a unique solution for the macroscopic problem has been demonstrated.

math.AP

Dimension reduction and homogenization of composite plate with matrix pre-strain

This paper focuses on the simultaneous homogenization and dimension reduction of periodic composite plates within the framework of non-linear elasticity. The composite plate in its reference (undeformed) configuration consists of a periodic perforated plate made of stiff material with holes filled by soft matrix material. The structure is clamped on a cylindrical part. Two cases of asymptotic analysis are considered: one without pre-strain and the other with matrix pre-strain. In both cases, the total elastic energy is in the von-Kármán (vK) regime ($\varepsilon^5$). A new splitting of the displacements is introduced to analyze the asymptotic behavior. The displacements are decomposed using the Kirchhoff-Love (KL) plate displacement decomposition. The use of a re-scaling unfolding operator allows for deriving the asymptotic behavior of the Green St. Venant's strain tensor in terms of displacements. The limit homogenized energy is shown to be of vK type with linear elastic cell problems, established using the $Γ$-convergence. Additionally, it is shown that for isotropic homogenized material, our limit vK plate is orthotropic. The derived results have practical applications in the design and analysis of composite structures.

math.AP