SearcharxivSearch

arXiv subjects

Amin Ebrahimi

Publications and source records attributed to Amin Ebrahimi.

17 recordsLinked to original sources

Hybrid Quantum-Classical Selective State Space Artificial Intelligence

Hybrid Quantum Classical (HQC) algorithms constitute one of the most effective paradigms for exploiting the computational advantages of quantum systems in large-scale numerical tasks. By operating in high-dimensional Hilbert spaces, quantum circuits enable exponential speed-ups and provide access to richer representations of cost landscapes compared to purely classical methods. These capabilities are particularly relevant for machine learning, where state-of-the-art models especially in Natural Language Processing (NLP) suffer from prohibitive time complexity due to massive matrix multiplications and high-dimensional optimization. In this manuscript, we propose a Hybrid Quantum Classical selection mechanism for the Mamba architecture, designed specifically for temporal sequence classification problems. Our approach leverages Variational Quantum Circuits (VQCs) as quantum gating modules that both enhance feature extraction and improve suppression of irrelevant information. This integration directly addresses the computational bottlenecks of deep learning architectures by exploiting quantum resources for more efficient representation learning. We analyze how introducing quantum subroutines into large language models (LLMs) impacts their generalization capability, expressivity, and parameter efficiency. The results highlight the potential of quantum-enhanced gating mechanisms as a path toward scalable, resource-efficient NLP models, in a limited simulation step. Within the first four epochs on a reshaped MNIST dataset with input format (batch, 784, d_model), our hybrid model achieved 24.6% accuracy while using one quantum layer and achieve higher expressivity, compared to 21.6% obtained by a purely classical selection mechanism. we state No founding

quant-ph

Improving Computational Efficiency in DSMC Simulations of Vacuum Gas Dynamics with a Fixed Number of Particles per Cell

The present study addresses the challenge of enhancing computational efficiency without compromising accuracy in numerical simulations of vacuum gas dynamics using the direct simulation Monte Carlo (DSMC) method. A technique termed "fixed particle per cell (FPPC)" was employed, which enforces a fixed number of simulator particles across all computational cells. The proposed technique eliminates the need for real-time adjustment of particle weights during simulation, reducing calculation time. Using the SPARTA solver, simulations of rarefied gas flow in a micromixer and rarefied supersonic airflow around a cylinder were conducted to validate the proposed technique. Results demonstrate that applying the FPPC technique effectively reduces computational costs while yielding results comparable to conventional DSMC implementations. Additionally, the application of local grid refinement coupled with the FPPC technique was investigated. The results show that integrating local grid refinement with the FPPC technique enables accurate prediction of flow behaviour in regions with significant gradients. These findings highlight the efficacy of the proposed technique in improving the accuracy and efficiency of numerical simulations of complex vacuum gas dynamics at a reduced computational cost.

physics.flu-dyn

Revealing the effects of laser beam shaping on melt pool behaviour in conduction-mode laser melting

Laser beam shaping offers remarkable possibilities to control and optimise process stability and tailor material properties and structure in laser-based welding and additive manufacturing. However, little is known about the influence of laser beam shaping on the complex melt-pool behaviour, solidified melt-track bead profile and microstructural grain morphology in laser material processing. A simulation-based approach is utilised in the present work to study the effects of laser beam intensity profile and angle of incidence on the melt-pool behaviour in conduction-mode laser melting of stainless steel 316L plates. The present high-fidelity physics-based computational model accounts for crucial physical phenomena in laser material processing such as complex laser-matter interaction, solidification and melting, heat and fluid flow dynamics, and free-surface oscillations. Experiments were carried out using different laser beam shapes and the validity of the numerical predictions is demonstrated. The results indicate that for identical processing parameters, reshaping the laser beam leads to notable changes in the thermal and fluid flow fields in the melt pool, affecting the melt-track bead profile and solidification microstructure. The columnar-to-equiaxed transition is discussed for different laser-intensity profiles.

cond-mat.mtrl-sci

Computational Study of Rarefied Gas Flow and Heat Transfer in Lid-driven Cylindrical Cavities

The gas flow characteristics in lid-driven cavities are influenced by several factors, such as cavity geometry, gas properties, and boundary conditions. In this study, the physics of heat and gas flow in cylindrical lid-driven cavities with various cross-sections, including fully or partially rounded edges, is investigated through numerical simulations using the direct simulation Monte Carlo (DSMC) and the discrete unified gas kinetic scheme (DUGKS) methods. The thermal and fluid flow fields are systematically studied for both constant and oscillatory lid velocities, for various degrees of gas rarefaction ranging from the slip to the free-molecular regimes. The impact of expansion cooling and viscous dissipation on the thermal and flow fields, as well as the occurrence of counter-gradient heat transfer (also known as anti-Fourier heat transfer) under non-equilibrium conditions, are explained based on the results obtained from numerical simulations. Furthermore, the influence of the incomplete tangential accommodation coefficient on the thermal and fluid flow fields is discussed. A comparison is made between the thermal and fluid flow fields predicted in cylindrical cavities and those in square-shaped cavities. The present work contributes to the advancement of micro/nano-electromechanical systems (MEMS/NEMS) by providing valuable insights into rarefied gas flow and heat transfer in lid-driven cavities.

physics.flu-dyn

The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates

The absorptivity of a material is a major uncertainty in numerical simulations of laser welding and additive manufacturing, and its value is often calibrated through trial-and-error exercises. This adversely affects the capability of numerical simulations when predicting the process behaviour and can eventually hinder the exploitation of fully digitised manufacturing processes, which is a goal of "industry 4.0". In the present work, an enhanced absorption model that takes into account the effects of laser characteristics, incident angle, surface temperature, and material composition is utilised to predict internal heat and fluid flow in laser melting of stainless steel 316L. Employing such an absorption model is physically more realistic than assuming a constant absorptivity and can reduce the costs associated with calibrating an appropriate value. High-fidelity three-dimensional numerical simulations were performed using both variable and constant absorptivity models and the predictions compared with experimental data. The results of the present work unravel the crucial effect of absorptivity on the physics of internal flow in laser material processing. The difference between melt-pool shapes obtained using fibre and CO$_2$ laser sources is explained, and factors affecting the local energy absorption are discussed.

physics.flu-dyn

The Effect of Groove Shape on Molten Metal Flow Behaviour in Gas Metal Arc Welding

One of the challenges for development, qualification and optimisation of arc welding processes lies in characterising the complex melt-pool behaviour which exhibits highly non-linear responses to variations of process parameters. The present work presents a simulation-based approach to describe the melt-pool behaviour in root-pass gas metal arc welding (GMAW). Three-dimensional numerical simulations have been performed using an enhanced physics-based computational model to unravel the effect of groove shape on complex unsteady heat and fluid flow in GMAW. The influence of surface deformations on power-density distribution and the forces applied to the molten material was taken into account. Utilising this model, the complex heat and fluid flow in melt pools were visualised and described for different groove shapes. Additionally, experiments were performed to validate the numerical predictions and the robustness of the present computational model is demonstrated. The model can be used to explore physical effects of governing fluid flow and melt-pool stability during gas metal arc root welding.

cond-mat.mtrl-sci

Pressure-driven Nitrogen Flow in Divergent Microchannels with Isothermal Walls

Gas flow and heat transfer in confined geometries at micro and nano scales differ considerably from those at macro-scales, mainly due to nonequilibrium effects such as velocity slip and temperature jump. The nonequilibrium effects enhance with a decrease in the characteristic length-scale of the fluid flow or the gas density, leading to the failure of the standard Navier-Stokes-Fourier (NSF) equations in predicting thermal and fluid flow fields. The direct simulation Monte-Carlo (DSMC) method is employed in the present work to investigate pressure-driven nitrogen flow in divergent microchannels with various divergence angles and isothermal walls. The thermal fields obtained from numerical simulations are analysed for different inlet-to-outlet pressure ratios (1.5 $\leq Π\leq$ 2.5), tangential momentum accommodation coefficients and Knudsen numbers (0.05 $\leq \mathrm{Kn} \leq$ 12.5), covering slip to free-molecular rarefaction regimes. The thermal field in the microchannel is predicted, heat-lines are visualised, and the physics of heat transfer in the microchannel is discussed. Due to the rarefaction effects, the direction of heat flow is largely opposite to that of the mass flow. However, the interplay between thermal and pressure gradients, which are affected by geometrical configurations of the microchannel and applied boundary conditions, determines the net heat flow direction. Additionally, the occurrence of thermal separation and cold-to-hot heat transfer (also known as anti-Fourier heat transfer) in divergent microchannels is explained.

physics.flu-dyn

The Effects of Process Parameters on Melt-pool Oscillatory Behaviour in Gas Tungsten Arc Welding

Internal flow behaviour and melt-pool surface oscillations during arc welding are complex and not yet fully understood. In the present work, high-fidelity numerical simulations are employed to describe the effects of welding position, sulphur concentration (60-300 ppm) and travel speed (1.25-5 mm/s) on molten metal flow dynamics in fully-penetrated melt-pools. A wavelet transform is implemented to obtain time-resolved frequency spectra of the oscillation signals, which overcomes the shortcomings of the Fourier transform in rendering time resolution of the frequency spectra. Comparing the results of the present numerical calculations with available analytical and experimental datasets, the robustness of the proposed approach in predicting melt-pool oscillations is demonstrated. The results reveal that changes in the surface morphology of the pool resulting from a change in welding position alter the spatial distribution of arc forces and power-density applied to the molten material, and in turn affect flow patterns in the pool. Under similar welding conditions, changing the sulphur concentration affects the Marangoni flow pattern, and increasing the travel speed decreases the size of the pool and increases the offset between top and bottom melt-pool surfaces, affecting the flow structures (vortex formation) on the surface. Variations in the internal flow pattern affect the evolution of melt-pool shape and its surface oscillations.

physics.flu-dyn

Numerical Study of Molten Metal Melt Pool Behaviour during Conduction-mode Laser Spot Melting

Molten metal melt pools are characterised by highly non-linear responses, which are very sensitive to imposed boundary conditions. Temporal and spatial variations in the energy flux distribution are often neglected in numerical simulations of melt pool behaviour. Additionally, thermo-physical properties of materials are commonly changed to achieve agreement between predicted melt-pool shape and experimental post-solidification macrograph. Focusing on laser spot melting in conduction mode, we investigated the influence of dynamically adjusted energy flux distribution and changing thermo-physical material properties on melt pool oscillatory behaviour using both deformable and non-deformable assumptions for the gas-metal interface. Our results demonstrate that adjusting the absorbed energy flux affects the oscillatory fluid flow behaviour in the melt pool and consequently the predicted melt-pool shape and size. We also show that changing the thermophysical material properties artificially or using a non-deformable surface assumption lead to significant differences in melt pool oscillatory behaviour compared to the cases in which these assumptions are not made.

physics.flu-dyn

The influence of surface deformation on thermocapillary flow instabilities in low Prandtl melting pools with surfactants

Heat and fluid flow in low Prandtl number melting pools during laser processing of materials are sensitive to the prescribed boundary conditions, and the responses are highly nonlinear. Previous studies have shown that fluid flow in melt pools with surfactants can be unstable at high Marangoni numbers. In numerical simulations of molten metal flow in melt pools, surface deformations and its influence on the energy absorbed by the material are often neglected. However, this simplifying assumption may reduce the level of accuracy of numerical predictions with surface deformations. In the present study, we carry out three-dimensional numerical simulations to realise the effects of surface deformations on thermocapillary flow instabilities in laser melting of a metallic alloy with surfactants. Our computational model is based on the finite-volume method and utilises the volume-of-fluid (VOF) method for gas-metal interface tracking. Additionally, we employ a dynamically adjusted heat source model and discuss its influence on numerical predictions of the melt pool behaviour. Our results demonstrate that including free surface deformations in numerical simulations enhances the predicted flow instabilities and, thus, the predicted solid-liquid interface morphologies.

physics.flu-dyn

Sensitivity of Numerical Predictions to the Permeability Coefficient in Simulations of Melting and Solidification Using the Enthalpy-Porosity Method

The high degree of uncertainty and conflicting literature data on the value of the permeability coefficient (also known as the mushy zone constant), which aims to dampen fluid velocities in the mushy zone and suppress them in solid regions, is a critical drawback when using the fixed-grid enthalpy-porosity technique for modelling non-isothermal phase-change processes. In the present study, the sensitivity of numerical predictions to the value of this coefficient was scrutinised. Using finite-volume based numerical simulations of isothermal and non-isothermal melting and solidification problems, the causes of increased sensitivity were identified. It was found that depending on the mushy-zone thickness and the velocity field, the solid-liquid interface morphology and the rate of phase-change are sensitive to the permeability coefficient. It is demonstrated that numerical predictions of an isothermal phase-change problem are independent of the permeability coefficient for sufficiently fine meshes. It is also shown that sensitivity to the choice of permeability coefficient can be assessed by means of an appropriately defined Péclet number.

physics.flu-dyn

Numerical study of liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators

The liquid flow and conjugated heat transfer performance of single-phase laminar flow in rectangular microchannels equipped with longitudinal vortex generators (LVGs) are numerically investigated. Deionized-water with temperature-dependent thermo-physical properties is employed to conduct the simulations. Three-dimensional simulations are performed using an open-source flow solver based on finite volume approach and SIMPLEC algorithm. Five different configurations of the microchannel with different angles of attack of the LVGs are considered. Simulation results are compared with available experimental data and a deviation below 10% is achieved. The results show that there is a 2-25% increase in the Nusselt number for microchannels with LVGs, while the friction factor increased by 4-30%, for Reynolds number ranged from 100 to 1100. Except one at Re=100, the overall performance of the all configurations of microchannels with LVGs is higher than one.

physics.flu-dyn

Numerical study of flow patterns and heat transfer in mini twisted oval tubes

Flow patterns and heat transfer inside mini twisted oval tubes (TOTs) heated by constant-temperature walls are numerically investigated. Different configurations of tubes are simulated using water as the working fluid with temperature-dependent thermo-physical properties at Reynolds numbers ranging between 500 and 1100. After validating the numerical method with the published correlations and available experimental results, the performance of TOTs is compared to a smooth circular tube. The overall performance of TOTs is evaluated by investigating the thermal-hydraulic performance and the results are analyzed in terms of the field synergy principle and entropy generation. Enhanced heat transfer performance for TOTs is observed at the expense of a higher pressure drop. Additionally, the secondary flow generated by the tube-wall twist is concluded to play a critical role in the augmentation of convective heat transfer, and consequently, better heat transfer performance. It is also observed that the improvement of synergy between velocity and temperature gradient and lower irreversibility cause heat transfer enhancement for TOTs.

physics.flu-dyn

An investigation on thermo-hydraulic performance of a flat-plate channel with pyramidal protrusions

In this study, a flat-plate channel configured with pyramidal protrusions are numerically analysed for the first time. Simulations of laminar single-phase fluid flow and heat transfer characteristics are developed using a finite-volume approach under steady-state condition. Pure water is selected as the coolant and its thermo-physical properties are modelled using a set of temperature-dependent functions. Different configurations of the channel, including a plain channel and a channel with nature-inspired protruded surfaces, are studied here for Reynolds numbers ranging from 135 to 1430. The effects of the protrusion shape, size and arrangement on the hydrothermal performance of a flat-plate channel are studied in details. The temperature of the upper and lower surfaces of the channel is kept constant during the simulations. It is observed that utilizing these configurations can boost the heat transfer up to 277.9% and amplify the pressure loss up to 179.4% with a respect to the plain channel. It is found that the overall efficiency of the channels with pyramidal protrusions is improved by 12.0-169.4% compared to the plain channel for the conditions studied here. Furthermore, the thermodynamic performance of the channel is investigated in terms of entropy generation and it is found that equipping the channels with pyramidal protrusions leads to lower irreversibility in the system.

physics.flu-dyn

Laminar convective heat transfer of shear-thinning liquids in rectangular channels with longitudinal vortex generators

Heat and fluid flow in a rectangular channel heat sink equipped with longitudinal vortex generators have been numerically investigated in the range of Reynolds numbers between 25 and 200. Aqueous solutions of carboxymethyl cellulose (CMC) with different concentrations (200-2000 ppm), which are shear-thinning non-Newtonian liquids, have been utilised as working fluid. Three-dimensional simulations have been performed on a plain channel and a channel with five pairs of vortex generators. The channels have a hydraulic diameter of 8 mm and are heated by constant wall temperature. The vortex generators have been mounted at different angles of attack and locations inside the channel. The shear-thinning liquid flow in rectangular channels with longitudinal vortex generators are described and the mechanisms of heat transfer enhancement are discussed. The results demonstrate a heat transfer enhancement of 39-188% using CMC aqueous solutions in rectangular channels with LVGs with respect to a Newtonian liquid flow (i.e. water). Additionally, it is shown that equipping rectangular channels with LVGs results in an enhancement of 24-135% in heat transfer performance vis-à-vis plain channel. However, this heat transfer enhancement is associated with larger pressure losses. For the range of parameters studied in this paper, increasing the CMC concentration, the angle of attack of vortex generators and their lateral distances leads to an increase in heat transfer performance. Additionally, heat transfer performance of rectangular channels with longitudinal vortex generators enhances with increasing the Reynolds number in the laminar flow regime.

physics.flu-dyn

Flow and Thermal Fields Investigation in Divergent Micro/Nano Channels

The present work is related to the study of the nitrogen gas flow through diverging micro and nano-channels. The direct simulation Monte-Carlo (DSMC) method has been used to study the flow. The Simplified Bernoulli Trials (SBT) collision scheme has been employed to reduce the computational costs and required amounts of the computer resources. The effects of various divergence angles on flow and thermal fields have been studied for different Knudsen numbers in late-slip and early-transition regimes. The inlet-to-outlet pressure ratio has been set to 2.5 for micro and nano-channels with a uniform constant wall temperature. By analyzing the numerical results no flow separation has been found due to slip at the wall which is different than flow behavior in continuum regime. The results indicate that the viscous component has a relatively large contribution to the overall pressure drop and flow behavior. It observed that for low divergence angles the effects of pressure forces dominate the effects of shear stress and divergence angle and cause the flow to accelerate along the channel while by increasing the divergence angle and therefore the effects of flow expansion, the flow decelerates along the channel. The mass flow rate through channel increases by increasing the divergence angle. Cold-to-hot heat transfer has been observed in diverging micro and nano-channels. In order to investigate the thermal behavior in diverging micro and nano-channels, the results have been compared to weakly non-linear constitutive laws derived from Boltzmann's equation.

physics.flu-dyn

DSMC investigation of rarefied gas flow through diverging micro- and nanochannels

Direct simulation Monte Carlo (DSMC) method with simplified Bernoulli-trials (SBT) collision scheme has been used to study the rarefied pressure-driven nitrogen flow through diverging microchannels. The fluid behaviours flowing between two plates with different divergence angles ranging between 0$^{\circ}$ to 17$^{\circ}$ are described at different pressure ratios (1.5${\le}{\prod}{\le}$2.5) and Knudsen numbers (0.03${\le}$Kn${\le}$12.7). The primary flow field properties, including pressure, velocity, and temperature, are presented for divergent microchannels and are compared with those of a microchannel with a uniform cross-section. The variations of the flow field properties in divergent microchannels, which are influenced by the area change, the channel pressure ratio and the rarefication are discussed. The results show no flow separation in divergent microchannels for all the range of simulation parameters studied in the present work. It has been found that a divergent channel can carry higher amounts of mass in comparison with an equivalent straight channel geometry. A correlation between the mass flow rate through microchannels, the divergence angle, the pressure ratio, and the Knudsen number has been suggested. The present numerical findings prove the occurrence of Knudsen minimum phenomenon in micro- and Nano- channels with non-uniform cross-sections.

physics.flu-dyn