arXiv subjects

Amine Mezghani

Publications and source records attributed to Amine Mezghani.

At least 37 records · Page 2Linked to original sources

arXiv2024

Vector Approximate Message Passing With Arbitrary I.I.D. Noise Priors

Approximate message passing (AMP) algorithms are devised under the Gaussianity assumption of the measurement noise vector. In this work, we relax this assumption within the vector AMP (VAMP) framework to arbitrary independent and identically distributed (i.i.d.) noise priors. We do so by rederiving the linear minimum mean square error (LMMSE) to accommodate both the noise and signal estimations within the message passing steps of VAMP. Numerical results demonstrate how our proposed algorithm handles non-Gaussian noise models as compared to VAMP. This extension to general noise priors enables the use of AMP algorithms in a wider range of engineering applications where non-Gaussian noise models are more appropriate.

cs.IT↗

arXiv2024

Towards 6G MIMO: Massive Spatial Multiplexing, Dense Arrays, and Interplay Between Electromagnetics and Processing

The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO (UM-MIMO)" is not only about adding more antennas but will also uncover new propagation and hardware phenomena that can only be treated by jointly utilizing insights from the communication, electromagnetic (EM), and circuit theory areas. This article offers a comprehensive overview of the key benefits of the UM-MIMO technology and the associated challenges. It explores massive multiplexing facilitated by radiative near-field effects, characterizes the spatial degrees-of-freedom, and practical channel estimation schemes tailored for massive arrays. Moreover, we provide a tutorial on EM theory and circuit theory, and how it is used to obtain physically consistent antenna and channel models. Subsequently, the article describes different ways to implement massive and dense antenna arrays, and how to co-design antennas with signal processing. The main open research challenges are identified at the end.

cs.IT↗

arXiv2023

Channel Estimation in RIS-Enabled mmWave Wireless Systems: A Variational Inference Approach

Channel estimation in reconfigurable intelligent surfaces (RIS)-aided systems is crucial for optimal configuration of the RIS and various downstream tasks such as user localization. In RIS-aided systems, channel estimation involves estimating two channels for the user-RIS (UE-RIS) and RIS-base station (RIS-BS) links. In the literature, two approaches are proposed: (i) cascaded channel estimation where the two channels are collapsed into a single one and estimated using training signals at the BS, and (ii) separate channel estimation that estimates each channel separately either in a passive or semi-passive RIS setting. In this work, we study the separate channel estimation problem in a fully passive RIS-aided millimeter-wave (mmWave) single-user single-input multiple-output (SIMO) communication system. First, we adopt a variational-inference (VI) approach to jointly estimate the UE-RIS and RIS-BS instantaneous channel state information (I-CSI). In particular, auxiliary posterior distributions of the I-CSI are learned through the maximization of the evidence lower bound. However, estimating the I-CSI for both links in every coherence block results in a high signaling overhead to control the RIS in scenarios with highly mobile users. Thus, we extend our first approach to estimate the slow-varying statistical CSI of the UE-RIS link overcoming the highly variant I-CSI. Precisely, our second method estimates the I-CSI of RIS-BS channel and the UE-RIS channel covariance matrix (CCM) directly from the uplink training signals in a fully passive RIS-aided system. The simulation results demonstrate that using maximum a posteriori channel estimation using the auxiliary posteriors can provide a capacity that approaches the capacity with perfect CSI.

eess.SP↗

arXiv2023

Optimal Placement of Transmissive RIS in the Near Field for Capacity Maximization in THz Communications

This study centers on Line-of-Sight (LoS) MIMO communication enabled by a Transmissive Reconfigurable Intelligent Surface (RIS) operating in the Terahertz (THz) frequency bands. The study demonstrates that the introduction of RIS can render the curvature of the wavefront apparent over the transmit and receive arrays, even when they are positioned in the far field from each other. This phenomenon contributes to an enhancement in spatial multiplexing. Notably, simulation results underline that the optimal placement of the RIS in the near-field is not solely contingent on proximity to the transmitter (Tx) or receiver (Rx) but relies on the inter-antenna spacing of the Tx and Rx.

cs.IT↗

arXiv2023

Reconfigurable Intelligent Surfaces-Enabled Intra-Cell Pilot Reuse in Massive MIMO Systems

Channel state information (CSI) estimation is a critical issue in the design of modern massive multiple-input multiple-output (mMIMO) networks. With the increasing number of users, assigning orthogonal pilots to everyone incurs a large overhead that strongly penalizes the system's spectral efficiency (SE). It becomes thus necessary to reuse pilots, giving rise to pilot contamination, a vital performance bottleneck of mMIMO networks. Reusing pilots among the users of the same cell is a desirable operation condition from the perspective of reducing training overheads; however, the intra-cell pilot contamination might worsen due to the users' proximity. Reconfigurable intelligent surfaces (RISs), capable of smartly controlling the wireless channel, can be leveraged for intra-cell pilot reuse. In this paper, our main contribution is a RIS-aided approach for intra-cell pilot reuse and the corresponding channel estimation method. Relying upon the knowledge of only statistical CSI, we optimize the RIS phase shifts based on a manifold optimization framework and the RIS positioning based on a deterministic approach. The extensive numerical results highlight the remarkable performance improvements the proposed scheme achieves (for both uplink and downlink transmissions) compared to other alternatives.

cs.IT↗

arXiv2023

Age-Limited Capacity of Massive MIMO

We investigate the age-limited capacity of the Gaussian many channel with total $N$ users, out of which a random subset of $K_{a}$ users are active in any transmission period, and a large-scale antenna array at the base station (BS). In an uplink scenario where the transmission power is fixed among the users, we consider the setting in which both the number of users, $N$, and the number of antennas at the BS, $M$, are allowed to grow large at a fixed ratio $ζ= {M}/{N}$. Assuming perfect channel state information (CSI) at the receiver, we derive the achievability bound under maximal ratio combining. As the number of active users, $K_{a}$, increases, the achievable spectral efficiency is found to increase monotonically to a limit $\log_2\left(1+\frac{M}{K_{a}}\right)$. Further extensions of the analysis to the zero-forcing receiver as well as imperfect CSI are provided, demonstrating the channel estimation penalty in terms of the mean squared error in estimation. Using the age of information (AoI) metric, first coined by Kaul et al., as our measure of data timeliness or freshness, we investigate the trade-offs between the AoI and spectral efficiency in the context massive connectivity with large-scale receiving antenna arrays. As an extension of Liu and Yu, based on our large system analysis, we provide an accurate characterization of the asymptotic (finite system size) spectral efficiency as a function of the number of antennas and the number of users, the attempt probability, and the AoI. It is found that while the spectral efficiency can be made large, the penalty is an increase in the minimum AoI obtainable. The proposed achievability bound is further compared against recent massive MIMO-based massive unsourced random access (URA) schemes.

cs.IT↗

arXiv2023

From Multilayer Perceptron to GPT: A Reflection on Deep Learning Research for Wireless Physical Layer

Most research studies on deep learning (DL) applied to the physical layer of wireless communication do not put forward the critical role of the accuracy-generalization trade-off in developing and evaluating practical algorithms. To highlight the disadvantage of this common practice, we revisit a data decoding example from one of the first papers introducing DL-based end-to-end wireless communication systems to the research community and promoting the use of artificial intelligence (AI)/DL for the wireless physical layer. We then put forward two key trade-offs in designing DL models for communication, namely, accuracy versus generalization and compression versus latency. We discuss their relevance in the context of wireless communications use cases using emerging DL models including large language models (LLMs). Finally, we summarize our proposed evaluation guidelines to enhance the research impact of DL on wireless communications. These guidelines are an attempt to reconcile the empirical nature of DL research with the rigorous requirement metrics of wireless communications systems.

cs.IT↗

arXiv2023

Super-Wideband Massive MIMO

We present a unified model for connected antenna arrays with a large number of tightly integrated (i.e., coupled) antennas in a compact space within the context of massive multiple-input multiple-output (MIMO) communication. We refer to this system as tightly-coupled massive MIMO. From an information-theoretic perspective, scaling the design of tightly-coupled massive MIMO systems in terms of the number of antennas, the operational bandwidth, and form factor was not addressed in prior art. We investigate this open research problem using a physically consistent modeling approach for far-field (FF) MIMO communication based on multi-port circuit theory. In doing so, we turn mutual coupling (MC) from a foe to a friend of MIMO systems design, thereby challenging a basic percept in antenna systems engineering that promotes MC mitigation/compensation. We show that tight MC widens the operational bandwidth of antenna arrays thereby unleashing a missing MIMO gain that we coin "bandwidth gain". Furthermore, we derive analytically the asymptotically optimum spacing-to-antenna-size ratio by establishing a condition for tight coupling in the limit of large-size antenna arrays with quasi-continuous apertures. We also optimize the antenna array size while maximizing the achievable rate under fixed transmit power and inter-element spacing. Then, we study the impact of MC on the achievable rate of MIMO systems under line-of-sight (LoS) and Rayleigh fading channels. These results reveal new insights into the design of tightly-coupled massive antenna arrays as opposed to the widely-adopted "disconnected" designs that disregard MC by putting faith in the half-wavelength spacing rule.

cs.IT↗

arXiv2023

Channel Estimation for Multicarrier Systems with Tightly-Coupled Broadband Arrays

This paper develops a linear minimum mean-square error (LMMSE) channel estimator for single and multicarrier systems that takes advantage of the mutual coupling in antenna arrays. We model the mutual coupling through multiport networks and express the single-user multiple-input multiple-output (MIMO) communication channel in terms of the impedance and scattering parameters of the antenna arrays. We put forward a novel scattering description of the communication channel which requires only the scattering parameters of the arrays as well as the terminated far-field embedded antenna patterns. In multi-antenna single-carrier systems under frequency-flat channels, we show that neglecting the mutual coupling effects leads to inaccurate characterization of the channel and noise correlations. We also extend the analysis to frequency-selective multicarrier channels wherein we further demonstrate that the coupling between the antenna elements within each array increases the number of resolvable channel taps. Standard LMMSE estimators based on existing inaccurate channel models become sub-optimal when applied to the new physically consistent model. We hence develop a new LMMSE estimator that calibrates the coupling and optimally estimates the MIMO channel. It is shown that appropriately accounting for mutual coupling through the developed physically consistent model leads to remarkable performance improvements both in terms of channel estimation accuracy and achievable rate. We demonstrate those gains in a rich-scattering environment using a connected array of slot antennas both at the transmitter and receiver sides.

cs.IT↗

arXiv2023

Domain Generalization in Machine Learning Models for Wireless Communications: Concepts, State-of-the-Art, and Open Issues

Data-driven machine learning (ML) is promoted as one potential technology to be used in next-generations wireless systems. This led to a large body of research work that applies ML techniques to solve problems in different layers of the wireless transmission link. However, most of these applications rely on supervised learning which assumes that the source (training) and target (test) data are independent and identically distributed (i.i.d). This assumption is often violated in the real world due to domain or distribution shifts between the source and the target data. Thus, it is important to ensure that these algorithms generalize to out-of-distribution (OOD) data. In this context, domain generalization (DG) tackles the OOD-related issues by learning models on different and distinct source domains/datasets with generalization capabilities to unseen new domains without additional finetuning. Motivated by the importance of DG requirements for wireless applications, we present a comprehensive overview of the recent developments in DG and the different sources of domain shift. We also summarize the existing DG methods and review their applications in selected wireless communication problems, and conclude with insights and open questions.

cs.LG↗

arXiv2023

Physically Consistent Models for Intelligent Reflective Surface-assisted Communications under Mutual Coupling and Element Size Constraint

We investigate the benefits of mutual coupling effects between the passive elements of intelligent reconfigurable surfaces (IRSs) on maximizing the achievable rate of downlink Internet-of-Things (IoT) networks. In this paper, we present an electromagnetic (EM) coupling model for IRSs whose elements are connected minimum scattering antennas (i.e., dipoles). Using Chu's theory, we incorporate the finite antenna size constraint on each element of the IRS to obtain the IRS mutual impedance matrix. By maximizing the IRS phase shiters using the gradient ascent procedure, our numerical results show that mutual coupling is indeed crucial to avoid the achievable rate degradation when the spacing between IRS elements is down to a fraction of the wavelength.

cs.IT↗

arXiv2022

Continual Learning-Based MIMO Channel Estimation: A Benchmarking Study

With the proliferation of deep learning techniques for wireless communication, several works have adopted learning-based approaches to solve the channel estimation problem. While these methods are usually promoted for their computational efficiency at inference time, their use is restricted to specific stationary training settings in terms of communication system parameters, e.g., signal-to-noise ratio (SNR) and coherence time. Therefore, the performance of these learning-based solutions will degrade when the models are tested on different settings than the ones used for training. This motivates our work in which we investigate continual supervised learning (CL) to mitigate the shortcomings of the current approaches. In particular, we design a set of channel estimation tasks wherein we vary different parameters of the channel model. We focus on Gauss-Markov Rayleigh fading channel estimation to assess the impact of non-stationarity on performance in terms of the mean square error (MSE) criterion. We study a selection of state-of-the-art CL methods and we showcase empirically the importance of catastrophic forgetting in continuously evolving channel settings. Our results demonstrate that the CL algorithms can improve the interference performance in two channel estimation tasks governed by changes in the SNR level and coherence time.

cs.IT↗

arXiv2022

Multi-user Downlink Beamforming using Uplink Downlink Duality with CEQs for Frequency Selective Channels

High-resolution fully digital transceivers are infeasible at millimeter-wave (mmWave) due to their increased power consumption, cost, and hardware complexity. The use of low-resolution converters is one possible solution to realize fully digital architectures at mmWave. In this paper, we consider a setting in which a fully digital base station with constant envelope quantized (CEQ) digital-to-analog converters on each radio frequency chain communicates with multiple single antenna users with individual signal-to-quantization-plus-interference-plus-noise ratio (SQINR) constraints over frequency selective channels. We first establish uplink downlink duality for the system with CEQ hardware constraints and OFDM-based transmission considered in this paper. Based on the uplink downlink duality principle, we present a solution to the multi-user multi-carrier beamforming and power allocation problem that maximizes the minimum SQINR over all users and sub-carriers. We then present a per sub-carrier version of the originally proposed solution that decouples all sub-carriers of the OFDM waveform resulting in smaller sub-problems that can be solved in a parallel manner. Our numerical results based on 3GPP channel models generated from Quadriga demonstrate improvements in terms of ergodic sum rate and ergodic minimum rate over state-of-the-art linear solutions. We also show improved performance over non-linear solutions in terms of the coded bit error rate with the increased flexibility of assigning individual user SQINRs built into the proposed framework.

eess.SP↗

arXiv2022

Multi-user Downlink Beamforming using Uplink Downlink Duality with 1-bit Converters for Flat Fading Channels

The increased power consumption of high-resolution data converters at higher carrier frequencies and larger bandwidths is becoming a bottleneck for communication systems. In this paper, we consider a fully digital base station equipped with 1-bit analog-to-digital (in uplink) and digital-to-analog (in downlink) converters on each radio frequency chain. The base station communicates with multiple single antenna users with individual SINR constraints. We first establish the uplink downlink duality principle under 1-bit hardware constraints under an uncorrelated quantization noise assumption. We then present a linear solution to the multi-user downlink beamforming problem based on the uplink downlink duality principle. The proposed solution takes into account the hardware constraints and jointly optimizes the downlink beamformers and the power allocated to each user. Optimized dithering obtained by adding dummy users to the true system users ensures that the uncorrelated quantization noise assumption is true under realistic settings. Detailed simulations carried out using 3GPP channel models generated from Quadriga show that our proposed solution outperforms state of the art solutions in terms of the ergodic sum and minimum rate especially when the number of users is large. We also demonstrate that the proposed solution significantly reduces the performance gap from non-linear solutions in terms of the uncoded bit error rate at a fraction of the computational complexity.

eess.SP↗

arXiv2021

Achievable Rate of Near-Field Communications Based on Physically Consistent Models

This paper introduces a novel information-theoretic approach for studying the effects of mutual coupling (MC), between the transmit and receive antennas, on the overall performance of single-input-single-output (SISO) near-field communications. By incorporating the finite antenna size constraint using Chu's theory and under the assumption of canonical-minimum scattering, we derive the MC between two radiating volumes of fixed sizes. Expressions for the self and mutual impedances are obtained by the use of the reciprocity theorem. Based on a circuit-theoretic two-port model for SISO radio communication systems, we establish the achievable rate for a given pair of transmit and receive antenna sizes, thereby providing an upper bound on the system performance under physical size constraints. Through the lens of these findings, we shed new light on the influence of MC on the information-theoretic limits of near-field communications using compact antennas.

cs.IT↗

arXiv2021

Optimizing Binary Symptom Checkers via Approximate Message Passing

Symptom checkers have been widely adopted as an intelligent e-healthcare application during the ongoing pandemic crisis. Their performance have been limited by the fine-grained quality of the collected medical knowledge between symptom and diseases. While the binarization of the relationships between symptoms and diseases simplifies the data collection process, it also leads to non-convex optimization problems during the inference step. In this paper, we formulate the symptom checking problem as an underdertermined non-convex optimization problem, thereby justifying the use of the compressive sensing framework to solve it. We show that the generalized vector approximate message passing (G-VAMP) algorithm provides the best performance for binary symptom checkers.

cs.LG↗

arXiv2021

Minimum Symbol Error Probability Low-Resolution Precoding for MU-MIMO Systems With PSK Modulation

We propose an optimal low-resolution precoding technique that minimizes the symbol error probability of the users. Unlike existing approaches that rely on QPSK modulation, for the derivation of the minimum symbol error probability objective function the current approach allows for any PSK modulation order. Moreover, the proposed method solves the corresponding discrete optimization problem optimally via a sophisticated branch-and-bound method. Moreover, we propose different approaches based on the greedy search method to compute practical solutions. Numerical simulations confirm the superiority of the proposed minimum symbol error probability criteria in terms of symbol error rate when compared with the established MMDDT and MMSE approaches.

cs.IT↗

arXiv2021

Modulating Intelligent Surfaces for Multi-User MIMO Systems: Beamforming and Modulation Design

This paper introduces a novel approach of utilizing the reconfigurable intelligent surface (RIS) for joint data modulation and signal beamforming in a multi-user downlink cellular network by leveraging the idea of backscatter communication. We present a general framework in which the RIS, referred to as modulating intelligent surface (MIS) in this paper, is used to: i) beamform the signals for a set of users whose data modulation is already performed by the base station (BS), and at the same time, ii) embed the data of a different set of users by passively modulating the deliberately sent carrier signals from the BS to the RIS. To maximize each user's spectral efficiency, a joint non-convex optimization problem is formulated under the sum minimum mean-square error (MMSE) criterion. Alternating optimization is used to divide the original joint problem into two tasks of: i) separately optimizing the MIS phase-shifts for passive beamforming along with data embedding for the BS- and MIS-served users, respectively, and ii) jointly optimizing the active precoder and the receive scaling factor for the BS- and MIS-served users, respectively. While the solution to the latter joint problem is found in closed-form using traditional optimization techniques, the optimal phase-shifts at the MIS are obtained by deriving the appropriate optimization-oriented vector approximate message passing (OOVAMP) algorithm. Moreover, the original joint problem is solved under both ideal and practical constraints on the MIS phase shifts, namely, the unimodular constraint and assuming each MIS element to be terminated by a variable reactive load. The proposed MIS-assisted scheme is compared against state-of-the-art RIS-assisted wireless communication schemes and simulation results reveal that it brings substantial improvements in terms of system throughput while supporting a much higher number of users.

cs.IT↗