Searcharxiv⌕ Search

arXiv subjects

Amine Mezghani

Publications and source records attributed to Amine Mezghani.

At least 73 records · Page 4Linked to original sources

Blind Estimation of Sparse Broadband Massive MIMO Channels with Ideal and One-bit ADCs

We study the maximum likelihood problem for the blind estimation of massive mmWave MIMO channels while taking into account their underlying sparse structure, the temporal shifts across antennas in the broadband regime, and ultimately one-bit quantization at the receiver. The sparsity in the angular domain is exploited as a key property to enable the unambiguous blind separation between user's channels. The main advantage of this approach is the fact that the overhead due to pilot sequences can be dramatically reduced especially when operating at low SNR per antenna. In addition, as sparsity is the only assumption made about the channel, the proposed method is robust with respect to the statistical properties of the channel and data and allows the channel estimation and the separation of interfering users from adjacent base stations to be performed in rapidly time-varying scenarios. For the case of one-bit receivers, a blind channel estimation is proposed that relies on the Expectation Maximization (EM) algorithm. Additionally, performance limits are derived based on the clairvoyant Cramer Rao lower bound. Simulation results demonstrate that this maximum likelihood formulation yields superior estimation accuracy in the narrowband as well as the wideband regime with reasonable computational complexity and limited model assumptions.

cs.IT↗

Spectral shaping with low resolution signals

We aim at investigating the impact of low resolution digital-to-analog converters (DACs) at the transmitter and low resolution analog-to-digital converters (ADCs) at the receiver on the required bandwidth and the required signalto- noise ratio (SNR). In particular, we consider the extreme case of only 1-bit resolution (with oversampling), where we propose a single carrier system architecture for minimizing the spectral occupation and the required SNR of 1-bit signals. In addition, the receiver is optimized to take into account the effects of quantization at both ends. Through simulations, we show that despite of the coarse quantization, sufficient spectral confinement is still achievable.

cs.IT↗

Spatial Coding Based on Minimum BER in 1-Bit Massive MIMO Systems

We consider a downlink 1-bit quantized multiuser (MU) multiple-input-multiple-output (MIMO) system, where 1-bit digital-to-analog (DACs) and analog-to-digital converters (ADCs) are used at the transmitter and the receiver for economical and computational efficiency. We end up with a discrete memoryless channel with input and output vectors belonging to the QPSK constellation. In the context of massive (MIMO) systems the number of base station (BS) antennas is much larger than the number of receive antennas. This leads to high input cardinality of the channel. In this work we introduce a method to reduce the input set based on the mimimum bit-error-ratio (BER) criterion combined with a non-linear precoding technique. This method is denoted as spatial coding. Simulations show that this spatial coding improves the BER behavior significantly removing the error floor due to coarse quantization.

cs.IT↗

DFE/THP duality for FBMC with highly frequency selective channels

Filter bank based multicarrier with Offset-QAM systems (FBMC/OQAM) are strong candidates for the waveform of future 5-th generation (5G) wireless standards. These systems can achieve maximum spectral efficiency compared to other multicarrier schemes, particularly in highly frequency selective propagation conditions. In this case a multi-tap, fractionally spaced equalizer or precoder needs to be inserted in each subcarrier at the receiver or transmitter side to compensate inter-symbol interference (ISI) and inter-carrier interference (ICI). In this paper we propose a new Tomlinson-Harashima precoder (THP) design for FBMC/OQAM based on the mean squared error (MSE) duality from a minimum MSE (MMSE) designed decision feedback equalizer (DFE).

cs.IT↗

MMSE precoder for massive MIMO using 1-bit quantization

We propose a novel linear minimum-mean-squared-error (MMSE) precoder design for a downlink (DL) massive multiple-input-multiple-output (MIMO) scenario. For economical and computational efficiency reasons low resolution 1-bit digital-to-analog (DAC) and analog-to-digital (ADC) converters are used. This comes at the cost of performance gain that can be recovered by the large number of antennas deployed at the base station (BS) and an appropiate precoder design to mitigate the distortions due to the coarse quantization. The proposed precoder takes the quantization non-linearities into account and is split into a digital precoder and an analog precoder. We formulate the two-stage precoding problem such that the MSE of the users is minimized under the 1-bit constraint. In the simulations, we compare the new optimized precoding scheme with previously proposed linear precoders in terms of uncoded bit error ratio (BER).

cs.IT↗

Power- and Spectral Efficient Communication System Design Using 1-Bit Quantization

Improving the power efficiency and spectral efficiency of communication systems has been one of the major research goals over the recent years. However, there is a tradeoff in achieving both goals at the same time. In this work, we consider the joint optimization of the power amplifier and a pulse shaping filter over a single-input single-output (SISO) additive white Gaussian noise (AWGN) channel using 1-bit analog-todigital (ADC) and digital-to-analog (DAC) converters. The goal of the optimization is the selection of the optimal system parameters in order to maximize the desired figure-of-merit (FOM) which is the product of power efficiency and spectral efficiency. Simulation results give an insight in choosing the optimal parameters of the pulse shaping filter and power amplifier to maximize the desired FOM.

cs.IT↗

Minimum BER Precoding in 1-Bit Massive MIMO Systems

1-bit digital-to-analog (DACs) and analog-to-digital converters (ADCs) are gaining more interest in massive MIMO systems for economical and computational efficiency. We present a new precoding technique to mitigate the inter-user-interference (IUI) and the channel distortions in a 1-bit downlink MUMISO system with QPSK symbols. The transmit signal vector is optimized taking into account the 1-bit quantization. We develop a sort of mapping based on a look-up table (LUT) between the input signal and the transmit signal. The LUT is updated for each channel realization. Simulation results show a significant gain in terms of the uncoded bit-error-ratio (BER) compared to the existing linear precoding techniques.

cs.IT↗

Massive MIMO Downlink 1-Bit Precoding with Linear Programming for PSK Signaling

Quantized massive multiple-input-multiple-output (MIMO) systems are gaining more interest due to their power efficiency. We present a new precoding technique to mitigate the multi-user interference and the quantization distortions in a downlink multi-user (MU) multiple-input-single-output (MISO) system with 1-bit quantization at the transmitter. This work is restricted to PSK modulation schemes. The transmit signal vector is optimized for every desired received vector taking into account the 1-bit quantization. The optimization is based on maximizing the safety margin to the decision thresholds of the PSK modulation. Simulation results show a significant gain in terms of the uncoded bit-error-ratio (BER) compared to the existing linear precoding techniques.

cs.IT↗

Optimal Design of Energy and Spectral Efficiency Tradeoff in One-Bit Massive MIMO Systems

This paper considers a single-cell massive multiple-input multiple-output (MIMO) system equipped with a base station (BS) that uses one-bit quantization and investigates the energy efficiency (EE) and spectral efficiency (SE) trade-off. We first propose a new precoding scheme and downlink power allocation strategy that results in uplink-downlink SINR duality for one-bit MIMO systems. Taking into account the effect of the imperfect channel state information, we obtain approximate closed-form expressions for the uplink and downlink achievable rates under duality with maximum ratio combining/matched-filter and zero-forcing processing. We then focus on joint optimization of the competing SE and EE objectives over the number of users, pilot training duration and operating power, using the weighted product method to obtain the EE/SE Pareto boundary. Numerical results are presented to verify our analytical resultsand demonstrate the fundamental tradeoff between EE and SE for different parameter settings.

cs.IT↗

Multipair Massive MIMO Relaying Systems with One-Bit ADCs and DACs

This paper considers a multipair amplify-and-forward massive MIMO relaying system with one-bit ADCs and one-bit DACs at the relay. The channel state information is estimated via pilot training, and then utilized by the relay to perform simple maximum-ratio combining/maximum-ratio transmission processing. Leveraging on the Bussgang decomposition, an exact achievable rate is derived for the system with correlated quantization noise. Based on this, a closed-form asymptotic approximation for the achievable rate is presented, thereby enabling efficient evaluation of the impact of key parameters on the system performance. Furthermore, power scaling laws are characterized to study the potential energy efficiency associated with deploying massive one-bit antenna arrays at the relay. In addition, a power allocation strategy is designed to compensate for the rate degradation caused by the coarse quantization. Our results suggest that the quality of the channel estimates depends on the specific orthogonal pilot sequences that are used, contrary to unquantized systems where any set of orthogonal pilot sequences gives the same result. Moreover, the sum rate gap between the double-quantized relay system and an ideal non-quantized system is a moderate factor of $4/π^2$ in the low power regime.

cs.IT↗

Channel Estimation and Performance Analysis of One-Bit Massive MIMO Systems

This paper considers channel estimation and system performance for the uplink of a single-cell massive multiple-input multiple-output (MIMO) system. Each receive antenna of the base station (BS) is assumed to be equipped with a pair of one-bit analog-to-digital converters (ADCs) to quantize the real and imaginary part of the received signal. We first propose an approach for channel estimation that is applicable for both flat and frequency-selective fading, based on the Bussgang decomposition that reformulates the nonlinear quantizer as a linear functionwith identical first- and second-order statistics. The resulting channel estimator outperforms previously proposed approaches across all SNRs. We then derive closed-form expressions for the achievable rate in flat fading channels assuming low SNR and a large number of users for the maximal ratio and zero forcing receivers that takes channel estimation error due to both noise and one-bit quantization into account. The closed-form expressions in turn allow us to obtain insight into important system design issues such as optimal resource allocation, maximal sum spectral efficiency, overall energy efficiency, and number of antennas. Numerical results are presented to verify our analytical results and demonstrate the benefit of optimizing system performance accordingly.

cs.IT↗

Downlink Achievable Rate Analysis in Massive MIMO Systems with One-Bit DACs

In this letter, we investigate the downlink performance of massive multiple-input multiple-output (MIMO) systems where the base station is equipped with one-bit analogto-digital/digital-to-analog converters (ADC/DACs). Considering training-based transmission, we assume the base station (BS) employs the linear minimum mean-squared-error (LMMSE) channel estimator and treats the channel estimate as the true channel to precode the data symbols. We derive an expression for the downlink achievable rate for matched-filter (MF) precoding. A detailed analysis of the resulting power efficiency is pursued using our expression of the achievable rate. Numerical results are presented to verify our analysis. In particular it is shown that, compared with conventional massive MIMO systems, the performance loss in one-bit massive MIMO systems can be compensated for by deploying approximately 2.5 times more antennas at the BS.

cs.IT↗

Precoding under Instantaneous Per-Antenna Peak Power Constraint

We consider a multi-user (MU) multiple-input-single-output (MISO) downlink system with M single-antenna users and N transmit antennas with a nonlinear power amplifier (PA) at each antenna. Instead of emitting constant envelope (CE) signals from the antennas to have highly power efficient PAs, we relax the CE constraint and allow the transmit signals to have instantaneous power less than or equal to the available power at each PA. The PA power efficiency decreases but simulation results show that the same performance in terms of bit-error-ratio (BER) can be achieved with less transmitted power and less PA power consumption. We propose a linear and a nonlinear precoder design to mitigate the multi-user interference (MUI) under the constraint of a maximal instantaneous per-antenna peak power.

cs.IT↗

Blind Estimation of Sparse Multi-User Massive MIMO Channels

We provide a maximum likelihood formulation for the blind estimation of massive mmWave MIMO channels while taking into account their underlying sparse structure. The main advantage of this approach is the fact that the overhead due to pilot sequences can be reduced dramatically especially when operating at low SNR per antenna. Thereby, the sparsity in the angular domain is exploited as a key property to enable the unambiguous blind separation between user's channels. On the other hand, as only the sparsity is assumed, the proposed method is robust with respect to the statistical properties of the channel and data and allows the estimation in rapidly time-varying scenarios and eventually the separation of interfering users from adjacent base stations. Additionally, a performance limit is derived based on the clairvoyant Cramér Rao lower bound. Simulation results demonstrate that this maximum likelihood formulation yields superior estimation accuracy with reasonable computational complexity and limited model assumptions.

cs.IT↗

Chromatic Dispersion Compensation Using Filter Bank Based Complex-Valued All-Pass Filter

A long-haul transmission of 100 Gb/s without optical chromatic-dispersion (CD) compensation provides a range of benefits regarding cost effectiveness, power budget, and nonlinearity tolerance. The channel memory is largely dominated by CD in this case with an intersymbol-interference spread of more than 100 symbol durations. In this paper, we propose CD equalization technique based on nonmaximally decimated discrete Fourier transform (NMDFT) filter bank (FB) with non-trivial prototype filter and complex-valued infinite impulse response (IIR) all-pass filter per sub-band. The design of the sub-band IIR all-pass filter is based on minimizing the mean square error (MSE) in group delay and phase cost functions in an optimization framework. Necessary conditions are derived and incorporated in a multi-step and multi-band optimization framework to ensure the stability of the resulting IIR filter. It is shown that the complexity of the proposed method grows logarithmically with the channel memory, therefore, larger CD values can be tolerated with our approach.

cs.IT↗

How Much Training is Needed in One-Bit Massive MIMO Systems at Low SNR?

This paper considers training-based transmissions in massive multi-input multi-output (MIMO) systems with one-bit analog-to-digital converters (ADCs). We assume that each coherent transmission block consists of a pilot training stage and a data transmission stage. The base station (BS) first employs the linear minimum mean-square-error (LMMSE) method to estimate the channel and then uses the maximum-ratio combining (MRC) receiver to detect the data symbols. We first obtain an approximate closed-form expression for the uplink achievable rate in the low SNR region. Then based on the result, we investigate the optimal training length that maximizes the sum spectral efficiency for two cases: i) The training power and the data transmission power are both optimized; ii) The training power and the data transmission power are equal. Numerical results show that, in contrast to conventional massive MIMO systems, the optimal training length in one-bit massive MIMO systems is greater than the number of users and depends on various parameters such as the coherence interval and the average transmit power. Also, unlike conventional systems, it is observed that in terms of sum spectral efficiency, there is relatively little benefit to separately optimizing the training and data power.

cs.IT↗

Asymptotic Parameter Tracking Performance with Measurement Data of 1-bit Resolution

The problem of signal parameter estimation and tracking with measurement data of low resolution is considered. In comparison to an ideal receiver with infinite receive resolution, the performance loss of a simplistic receiver with 1-bit resolution is investigated. For the case where the measurement data is preprocessed by a symmetric hard-limiting device with 1-bit output, it is well-understood that the performance for low SNR channel parameter estimation degrades moderately by 2/pi (-1.96 dB). Here we show that the 1-bit quantization loss can be significantly smaller if information about the temporal evolution of the channel parameters is taken into account in the form of a state-space model. By the analysis of a Bayesian bound for the achievable tracking performance, we attain the result that the quantization loss in dB is in general smaller by a factor of two if the channel evolution is slow. For the low SNR regime, this is equivalent to a reduced loss of sqrt(2/pi) (-0.98 dB). By simulating non-linear filtering algorithms for a satellite-based ranging application (GPS) and a UWB channel estimation problem, both with low-complexity 1-bit analog-to-digital converter (ADC) at the receiver, we verify that the analytical characterization of the tracking error is accurate. This shows that the performance loss due to observations with low amplitude resolution can, in practice, be much less pronounced than indicated by classical results. Finally, we discuss the implication of the result for medium SNR applications like channel estimation in the context of mobile wireless communications.

cs.IT↗

Compensation of Amplifier Distortion for OFDM signals based on Iterative Hard Thresholding

The mitigation of nonlinear distortion caused by power amplifiers (PA) in Orthogonal Frequency Division Multiplexing (OFDM) systems is an essential issue to enable energy efficient operation. In this work we proposed a new algorithm for receiver-based clipping estimation in OFDM systems that combines the Iterative Hard Thresholding (IHT) method with a weighting corresponding to the estimated probability of clipping. Thereby a more general amplifier input-output characteristic is considered, which is assumed to be unknown at the receiver side. Further, we avoid the use of dedicated subcarriers and formulate the recovery problem solely on reliably detected sub-carriers. Through simulations, we show that the proposed technique achieves a better complexity-performance tradeoff compared to existing methods.

cs.IT↗