arXiv subjects

Amir H. Safavi-Naeini

Publications and source records attributed to Amir H. Safavi-Naeini.

At least 37 records · Page 2Linked to original sources

arXiv2024

Vacuum Beam Guide for Large-Scale Quantum Networks

The vacuum beam guide (VBG) presents a completely different solution for quantum channels to overcome the limitations of existing fiber and satellite technologies for long-distance quantum communication. With an array of aligned lenses spaced kilometers apart, the VBG offers ultra-high transparency over a wide range of optical wavelengths. With realistic parameters, the VBG can outperform the best fiber by three orders of magnitude in terms of attenuation rate. Consequently, the VBG can enable long-range quantum communication over thousands of kilometers with quantum channel capacity beyond $10^{13}$ qubit/sec, orders of magnitude higher than the state-of-the-art quantum satellite communication rate. Remarkably, without relying on quantum repeaters, the VBG can provide a ground-based, low-loss, high-bandwidth quantum channel that enables novel distributed quantum information applications for computing, communication, and sensing.

quant-ph↗

arXiv2024

Quantum limits of superconducting-photonic links and their extension to mm-waves

Photonic addressing of superconducting circuits has been proposed to overcome wiring complexity and heat load challenges, but superconducting-photonic links suffer from an efficiency-noise trade-off that limits scalability. This trade-off arises because increasing power conversion efficiency requires reducing optical power, which makes the converted signal susceptible to shot noise. We analyze this trade-off and find the infidelity of qubit gates driven by photonic signals scales inversely with the number of photons used, and therefore the power efficiency of the converter. While methods like nonlinear detection or squeezed light could mitigate this effect, we consider generating higher frequency electrical signals, such as millimeter-waves (100 GHz), using laser light. At these higher frequencies, circuits have higher operating temperatures and cooling power budgets. We demonstrate an optically-driven cryogenic millimeter-wave source with a power efficiency of $10^{-4}$ that can generate ${1}~\mathrm{μW}$ of RF power at 80 GHz with 1500 thermal photons of added noise at 4 K. Using this source, we perform frequency-domain spectroscopy of superconducting NbTiN resonators at 80-90 GHz. Our results show a promising approach to alleviate the efficiency-noise constraints on optically-driven superconducting circuits while leveraging the benefits of photonic signal delivery. Further optimization of power efficiency and noise at high frequencies could make photonic control of superconducting qubits viable at temperatures exceeding 1 kelvin.

quant-ph↗

arXiv2024

A two-dimensional optomechanical crystal for quantum transduction

Integrated optomechanical systems are one of the leading platforms for manipulating, sensing, and distributing quantum information. The temperature increase due to residual optical absorption sets the ultimate limit on performance for these applications. In this work, we demonstrate a two-dimensional optomechanical crystal geometry, named \textbf{b-dagger}, that alleviates this problem through increased thermal anchoring to the surrounding material. Our mechanical mode operates at 7.4 GHz, well within the operation range of standard cryogenic microwave hardware and piezoelectric transducers. The enhanced thermalization combined with the large optomechanical coupling rates, $g_0/2π\approx 880~\mathrm{kHz}$, and high optical quality factors, $Q_\text{opt} = 2.4 \times 10^5$, enables the ground-state cooling of the acoustic mode to phononic occupancies as low as $n_\text{m} = 0.35$ from an initial temperature of 3 kelvin, as well as entering the optomechanical strong-coupling regime. Finally, we perform pulsed sideband asymmetry of our devices at a temperature below 10 millikelvin and demonstrate ground-state operation ($n_\text{m} < 0.45$) for repetition rates as high as 3 MHz. Our results extend the boundaries of optomechanical system capabilities and establish a robust foundation for the next generation of microwave-to-optical transducers with entanglement rates overcoming the decoherence rates of state-of-the-art superconducting qubits.

quant-ph↗

arXiv2023

Single-Mode Squeezed Light Generation and Tomography with an Integrated Optical Parametric Oscillator

Quantum optical technologies promise advances in sensing, computing, and communication. A key resource is squeezed light, where quantum noise is redistributed between optical quadratures. We introduce a monolithic, chip-scale platform that exploits the $χ^{(2)}$ nonlinearity of a thin-film lithium niobate (TFLN) resonator device to efficiently generate squeezed states of light. Our system integrates all essential components -- except for the laser and two detectors -- on a single chip with an area of one square centimeter, significantly reducing the size, operational complexity, and power consumption associated with conventional setups. Our work addresses challenges that have limited previous integrated nonlinear photonic implementations that rely on either $χ^{(3)}$ nonlinear resonators or on integrated waveguide $χ^{(2)}$ parametric amplifiers. Using the balanced homodyne measurement subsystem that we implemented on the same chip, we measure a squeezing of 0.55 dB and an anti-squeezing of 1.55 dB. We use 20 mW of input power to generate the parametric oscillator pump field by employing second harmonic generation on the same chip. Our work represents a substantial step toward compact and efficient quantum optical systems posed to leverage the rapid advances in integrated nonlinear and quantum photonics.

quant-ph↗

arXiv2023

Analysis of arbitrary superconducting quantum circuits accompanied by a Python package: SQcircuit

Superconducting quantum circuits are a promising hardware platform for realizing a fault-tolerant quantum computer. Accelerating progress in this field of research demands general approaches and computational tools to analyze and design more complex superconducting circuits. We develop a framework to systematically construct a superconducting quantum circuit's quantized Hamiltonian from its physical description. As is often the case with quantum descriptions of multicoordinate systems, the complexity rises rapidly with the number of variables. Therefore, we introduce a set of coordinate transformations with which we can find bases to diagonalize the Hamiltonian efficiently. Furthermore, we broaden our framework's scope to calculate the circuit's key properties required for optimizing and discovering novel qubits. We implement the methods described in this work in an open-source Python package SQcircuit. In this manuscript, we introduce the reader to the SQcircuit environment and functionality. We show through a series of examples how to analyze a number of interesting quantum circuits and obtain features such as the spectrum, coherence times, transition matrix elements, coupling operators, and the phase coordinate representation of eigenfunctions.

quant-ph↗

arXiv2023

Arbitrary electro-optic bandwidth and frequency control in lithium niobate optical resonators

In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over resonator frequency and bandwidth on two different devices. We observe up to $\sim50\times$ tuning in the bandwidth over $\sim50$ V with linear frequency control of $\sim230$ MHz/V. We also develop a closed-form model predicting the tuning behavior of the device. This paves the way for rapid phase and amplitude control over light transmitted through our device.

physics.optics↗

arXiv2023

Mid-infrared spectroscopy with a broadly tunable thin-film lithium niobate optical parametric oscillator

Mid-infrared spectroscopy, an important and widespread technique for sensing molecules, has encountered barriers stemming from sources either limited in tuning range or excessively bulky for practical field use. We present a compact, efficient, and broadly tunable optical parametric oscillator (OPO) device surmounting these challenges. Leveraging a dispersion-engineered singly-resonant OPO implemented in thin-film lithium niobate-on-sapphire, we achieve broad and controlled tuning over an octave, from 1.5 to 3.3 microns by combining laser and temperature tuning. The device generates > 25 mW of mid-infrared light at 3.2 microns, offering a power conversion efficiency of 15% (45% quantum efficiency). We demonstrate the tuning and performance of the device by successfully measuring the spectra of methane and ammonia, verifying our approach's relevance for gas sensing. Our device signifies an important advance in nonlinear photonics miniaturization and brings practical field applications of high-speed and broadband mid-infrared spectroscopy closer to reality.

physics.optics↗

arXiv2023

Integrated frequency-modulated optical parametric oscillator

Optical frequency combs have revolutionized precision measurement, time-keeping, and molecular spectroscopy. A substantial effort has developed around "microcombs": integrating comb-generating technologies into compact, reliable photonic platforms. Current approaches for generating these microcombs involve either the electro-optic (EO) or Kerr mechanisms. Despite rapid progress, maintaining high efficiency and wide bandwidth remains challenging. Here, we introduce a new class of microcomb -- an integrated optical frequency comb generator that combines electro-optics and parametric amplification to yield a frequency-modulated optical parametric oscillator (FM-OPO). In stark contrast to EO and Kerr combs, the FM-OPO microcomb does not form pulses but maintains operational simplicity and highly efficient pump power utilization with an output resembling a frequency-modulated laser. We outline the working principles of FM-OPO and demonstrate them by fabricating the complete optical system in thin-film lithium niobate (LNOI). We measure pump to comb internal conversion efficiency exceeding 93% (34% out-coupled) over a nearly flat-top spectral distribution spanning approximately 1,000 modes (approximately 6 THz). Compared to an EO comb, the cavity dispersion rather than loss determines the FM-OPO bandwidth, enabling broadband combs with a smaller RF modulation power. The FM-OPO microcomb, with its robust operational dynamics, high efficiency, and large bandwidth, contributes a new approach to the field of microcombs and promises to herald an era of miniaturized precision measurement, and spectroscopy tools to accelerate advancements in metrology, spectroscopy, telecommunications, sensing, and computing.

physics.optics↗

arXiv2023

Efficient Photonic Integration of Diamond Color Centers and Thin-Film Lithium Niobate

On-chip photonic quantum circuits with integrated quantum memories have the potential to radically progress hardware for quantum information processing. In particular, negatively charged group-IV color centers in diamond are promising candidates for quantum memories, as they combine long storage times with excellent optical emission properties and an optically-addressable spin state. However, as a material, diamond lacks many functionalities needed to realize scalable quantum systems. Thin-film lithium niobate (TFLN), in contrast, offers a number of useful photonic nonlinearities, including the electro-optic effect, piezoelectricity, and capabilities for periodically-poled quasi-phase matching. Here, we present highly efficient heterogeneous integration of diamond nanobeams containing negatively charged silicon-vacancy (SiV) centers with TFLN waveguides. We observe greater than 90\% transmission efficiency between the diamond nanobeam and TFLN waveguide on average across multiple measurements. By comparing saturation signal levels between confocal and integrated collection, we determine a $10$-fold increase in photon counts channeled into TFLN waveguides versus that into out-of-plane collection channels. Our results constitute a key step for creating scalable integrated quantum photonic circuits that leverage the advantages of both diamond and TFLN materials.

physics.optics↗

arXiv2023

Surface Modification and Coherence in Lithium Niobate SAW Resonators

Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, x-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.

quant-ph↗

arXiv2023

Strong dispersive coupling between a mechanical resonator and a fluxonium superconducting qubit

We demonstrate strong dispersive coupling between a fluxonium superconducting qubit and a 690 megahertz mechanical oscillator, extending the reach of circuit quantum acousto-dynamics (cQAD) experiments into a new range of frequencies. We have engineered a qubit-phonon coupling rate of $g\approx2π\times14~\text{MHz}$, and achieved a dispersive interaction that exceeds the decoherence rates of both systems while the qubit and mechanics are highly nonresonant ($Δ/g\gtrsim10$). Leveraging this strong coupling, we perform phonon number-resolved measurements of the mechanical resonator and investigate its dissipation and dephasing properties. Our results demonstrate the potential for fluxonium-based hybrid quantum systems, and a path for developing new quantum sensing and information processing schemes with phonons at frequencies below 700 MHz to significantly expand the toolbox of cQAD.

quant-ph↗

arXiv2023

Flexible Integration of Gigahertz Nanomechanical Resonators with a Superconducting Microwave Resonator using a Bonded Flip-Chip Method

We demonstrate strong coupling of gigahertz-frequency nanomechanical resonators to a frequency-tunable superconducting microwave resonator via a galvanically bonded flip-chip method. By tuning the microwave resonator with an external magnetic field, we observe a series of hybridized microwave-mechanical modes and report coupling strengths of $\sim {15}~\text{MHz}$ at cryogenic temperatures. The demonstrated multi-chip approach provides flexible rapid characterization and simplified fabrication, and could potentially enable coupling between a variety of quantum systems. Our work represents a step towards a plug-and-play architecture for building more complex hybrid quantum systems.

quant-ph↗

arXiv2023

Quantum control and noise protection of a Floquet $0-π$ qubit

Time-periodic systems allow engineering new effective Hamiltonians from limited physical interactions. For example, the inverted position of the Kapitza pendulum emerges as a stable equilibrium with rapid drive of its pivot point. In this work, we propose the $\textit{Kapitzonium}$: a Floquet qubit that is the superconducting circuit analog of a mechanical Kapitza pendulum. Under periodic driving, the emerging qubit states are exponentially protected against bit and phase flips caused by dissipation, which is the primary source of decoherence of current qubits. However, we find that dissipation causes leakage out of the Floquet qubit subspace. We engineer a passive cooling scheme to stabilize the qubit subspace, which is crucial for high fidelity quantum control under dissipation. Furthermore, we introduce a hardware-efficient fluorescence-based method for qubit measurement and discuss the experimental implementation of the Floquet qubit. The proposed Kapitzonium is one of the simplest Floquet qubits that can be realized with current technology -- and it already has many intriguing features and capabilities. Our work provides the first steps to develop more complex Floquet quantum systems from the ground up to realize large-scale protected engineered dynamics.

quant-ph↗

arXiv2023

Studying phonon coherence with a quantum sensor

In the field of quantum technology, nanomechanical oscillators offer a host of useful properties given their compact size, long lifetimes, and ability to detect force and motion. Their integration with superconducting quantum circuits shows promise for hardware-efficient computation architectures and error-correction protocols based on superpositions of mechanical coherent states. One limitation of this approach is decoherence processes affecting the mechanical oscillator. Of particular interest are two-level system (TLS) defects in the resonator host material, which have been widely studied in the classical domain, primarily via measurements of the material loss tangent. In this manuscript, we use a superconducting qubit as a quantum sensor to perform phonon number-resolved measurements on a phononic crystal cavity. This enables a high-resolution study of mechanical dissipation and dephasing in coherent states of variable size (mean phonon number $\navg\simeq1-10$). We observe nonexponential energy decay and a state size-dependent reduction of the dephasing rate, which we attribute to interactions with TLS. Using a numerical model, we reproduce the energy decay signatures (and to a lesser extent, the dephasing signatures) via mechanical emission into a small ensemble ($N=5$) of saturable and rapidly dephasing TLS. Our findings comprise a detailed examination of TLS-induced phonon decoherence in the quantum regime.

quant-ph↗

arXiv2022

Integrated Quantum Optical Phase Sensor

The quantum noise of light fundamentally limits optical phase sensors. A semiclassical picture attributes this noise to the random arrival time of photons from a coherent light source such as a laser. An engineered source of squeezed states suppresses this noise and allows sensitivity beyond the standard quantum limit (SQL) for phase detection. Advanced gravitational wave detectors like LIGO have already incorporated such sources, and nascent efforts in realizing quantum biological measurements have provided glimpses into new capabilities emerging in quantum measurement. We need ways to engineer and use quantum light within deployable quantum sensors that operate outside the confines of a lab environment. Here we present a photonic integrated circuit fabricated in thin-film lithium niobate that provides a path to meet these requirements. We use the second-order nonlinearity to produce a squeezed state at the same frequency as the pump light and realize circuit control and sensing with electro-optics. Using a 26.2 milliwatts of optical power, we measure (2.7 $\pm$ 0.2 )$\%$ squeezing and apply it to increase the signal-to-noise ratio of phase measurement. We anticipate that on-chip photonic systems like this, which operate with low power and integrate all of the needed functionality on a single die, will open new opportunities for quantum optical sensing.

quant-ph↗

arXiv2022

Optically heralded microwave photons

A quantum network that distributes and processes entanglement would enable powerful new computers and sensors. Optical photons with a frequency of a few hundred terahertz are perhaps the only way to distribute quantum information over long distances. Superconducting qubits on the other hand, which are one of the most promising approaches for realizing large-scale quantum machines, operate naturally on microwave photons that have roughly $40,000$ times less energy. To network these quantum machines across appreciable distances, we must bridge this frequency gap and learn how to generate entanglement across widely disparate parts of the electromagnetic spectrum. Here we implement and demonstrate a transducer device that can generate entanglement between optical and microwave photons, and use it to show that by detecting an optical photon we add a single photon to the microwave field. We achieve this by using a gigahertz nanomechanical resonance as an intermediary, and efficiently coupling it to optical and microwave channels through strong optomechanical and piezoelectric interactions. We show continuous operation of the transducer with $5\%$ frequency conversion efficiency, and pulsed microwave photon generation at a heralding rate of $15$ hertz. Optical absorption in the device generates thermal noise of less than two microwave photons. Joint measurements on optical photons from a pair of transducers would realize entanglement generation between distant microwave-frequency quantum nodes. Improvements of the system efficiency and device performance, necessary to realize a high rate of entanglement generation in such networks are within reach.

quant-ph↗

arXiv2022

Platform-agnostic waveguide integration of high-speed photodetectors with evaporated tellurium thin films

Many attractive photonics platforms still lack integrated photodetectors due to inherent material incompatibilities and lack of process scalability, preventing their widespread deployment. Here we address the problem of scalably integrating photodetectors in a photonic platform-independent manner. Using a thermal evaporation and deposition technique developed for nanoelectronics, we show that tellurium (Te), a quasi-2D semi-conductive element, can be evaporated at low temperature directly onto photonic chips to form air-stable, high-responsivity, high-speed, ultrawide-band photodetectors. We demonstrate detection at visible, telecom, and mid-infrared wavelengths, a bandwidth of more than 40 GHz, and platform-independent scalable integration with photonic structures in silicon, silicon nitride and lithium niobate.

physics.optics↗

arXiv2022

Ultra-broadband mid-infrared generation in dispersion-engineered thin-film lithium niobate

Thin-film lithium niobate (TFLN) is an emerging platform for compact, low-power nonlinear-optical devices, and has been used extensively for near-infrared frequency conversion. Recent work has extended these devices to mid-infrared wavelengths, where broadly tunable sources may be used for chemical sensing. To this end, we demonstrate efficient and broadband difference frequency generation between a fixed 1-micron pump and a tunable telecom source in uniformly-poled TFLN-on-sapphire by harnessing the dispersion-engineering available in tightly-confining waveguides. We show a simultaneous 1-2 order-of-magnitude improvement in conversion efficiency and ~5-fold enhancement of operating bandwidth for mid-infrared generation when compared to conventional lithium niobate waveguides. We also examine the effects of mid-infrared loss from surface-adsorbed water on the performance of these devices.

physics.optics↗