arXiv subjects

Amir Khan

Publications and source records attributed to Amir Khan.

13 recordsLinked to original sources

arXiv2026

Terahertz Phase Inversion via Field-Free Spin-Orbit Torque Switching in an Antenna-Integrated Spintronic Heterostructure

We demonstrate microsecond-timescale electrical control of the terahertz (THz) emission phase in broadband field-free spintronic THz emitters, enabling megahertz-rate phase inversion while overcoming the kilohertz limitations of conventional mechanical and field-driven approaches. Our device integrates an H-dipole antenna with a spintronic heterostructure exhibiting uniaxial magnetic anisotropy, enabling deterministic spin-orbit torque induced in-plane magnetization switching without external magnetic fields. The corresponding THz phase inversion is directly observed in the time domain signal, by applying $1\,\mu \mathrm{s}$ electrical pulses on the bias striplines of the H-dipole. This field-free operation reduces system complexity while significantly extending modulation bandwidth. Our results establish electrically programmable spintronic THz emitters that could be used to develop a compact and scalable platform for integrated on-chip THz devices and ultrafast applications, including phase-sensitive spectroscopy and near-field imaging, where high-speed and precise control of THz waveforms is essential.

cond-mat.mtrl-sci↗

arXiv2026

Enhancing Construction Worker Safety in Extreme Heat: A Machine Learning Approach Utilizing Wearable Technology for Predictive Health Analytics

Construction workers are highly vulnerable to heat stress, yet tools that translate real-time physiological data into actionable safety intelligence remain scarce. This study addresses this gap by developing and evaluating deep learning models, specifically a baseline Long Short-Term Memory (LSTM) network and an attention-based LSTM, to predict heat stress among 19 workers in Saudi Arabia. Using Garmin Vivosmart 5 smartwatches to monitor metrics such as heart rate, HRV, and oxygen saturation, the attention-based model outperformed the baseline, achieving 95.40% testing accuracy and significantly reducing false positives and negatives. With precision, recall, and F1 scores of 0.982, this approach not only improves predictive performance but also offers interpretable results suitable for integration into IoT-enabled safety systems and BIM dashboards, advancing proactive, informatics-driven safety management in the construction industry.

cs.AI↗

arXiv2025

Synchronisation of a tidal binary by inward orbital migration. The case of Pluto and Charon

It is usually taken for granted that mutual synchronisation of a tidal two-body system is attained through tidal recession, assuming the reduced Hill sphere is not reached. However, synchronisation can be achieved also via tidal approach, provided the Roche limit is not crossed. For each of the two scenarios, we derive the condition under which the evolving synchronicity radius catches up with the tidally evolving orbit. We consider the two scenarios for the Pluto-Charon system and examine the impact-origin hypothesis of Charon's formation against capture. Based on geophysical evidence, we propose that capture appears more likely. Motivated by this conclusion, we investigate the capture scenario, wherein the orbital evolution of Charon starts at a larger distance than present and undergoes tidal descent, both analytically and numerically. We also consider the possibility that Pluto's initial prograde spin underwent a reversal by a tidally approaching retrograde Charon. Depending on the initial conditions, we observe temporary locking of Charon into higher spin-orbit resonances (3:2 to 7:2) during the first 0.5 Myr of the system's evolution. Owing to a greater initial separation between the partners, the power dissipated in each of them turns out to be much lower than in the case of tidal recession of bodies of the same internal structure. The greater initial separation also results in lower tidal stress, which may explain the absence of tidally generated fracture patterns.

astro-ph.EP↗

arXiv2025

Uniaxial Magnetic Anisotropy and Type-X/Y Current-Induced Magnetization Switching in Oblique-Angle-Deposited Ta/CoFeB/Pt and W/CoFeB/Pt Heterostructures

Planar current-induced magnetization switching (CIMS) driven by spin-orbit torque (SOT) requires an in-plane uniaxial magnetic anisotropy (UMA), which can be induced by oblique-angle sputter deposition of the heavy-metal underlayer in heavy-metal/ferromagnet heterostructures. To enhance the SOT efficiency, we employ trilayer heterostructures of (Ta or W)/CoFeB/Pt, where the CoFeB layer exhibits a UMA of 50 mT at 2 nm thickness of Ta or W. The magnetization reversal in Hall-bar devices is detected through unidirectional spin Hall magnetoresistance (USMR) for the type Y geometry (easy-axis transverse to current) and planar Hall measurements for the type X geometry (easy-axis parallel to current). Both configurations exhibit CIMS with sub-microsecond current pulses, reaching switching current densities as low as $2 \times 10^{11}$ A/m$^2$ for a W (4 nm)/CoFeB (1.4 nm)/Pt (2 nm) stack with a UMA of 146 mT. Macrospin simulations reproduce the type Y switching as coherent magnetization rotation, whereas the type X devices switch at much lower currents than predicted, indicating that nucleation and domain-wall propagation dominate reversal in this geometry. Our results show that combining oblique-angle deposition with easy-axis engineering enables deterministic, field-free switching, paving the way for future low-power spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Efficient Spintronic THz Emitters Without External Magnetic Field

We investigate the performance of state-of-the-art spintronic THz emitters (W or Ta)/CoFeB/Pt with non-magnetic underlayer deposited using oblique angle deposition. The THz emission amplitude in the presence or absence of an external magnetic field remains the same and remarkably stable over time. This stability is attributed to the enhanced uniaxial magnetic anisotropy in the ferromagnetic layer, achieved by oblique angle deposition of the underlying non-magnetic layer. Our findings could be used for the development of practical field-free emitters of linearly polarized THz radiation, potentially enabling novel applications in future THz technologies.

physics.app-ph↗

arXiv2024

Enhancing Thrust in Flapping Airfoils Through Wake Interactions with Oscillating Cylinder

Inspired by the natural motion of insects, fish, and other animals, flapping airfoils have gained significant importance due to their applications in fields such as ship propulsion, micro aerial vehicles, and autonomous underwater vehicles. Over the past two decades, extensive research has focused on understanding the dynamics of these airfoils, their thrust production capabilities, and methods to enhance this thrust in unsteady flows. This study investigates how the presence of a cylinder oscillating due to incoming flow affects the thrust performance of the flapping airfoil. The results indicate that the flapping airfoil generates increased thrust when placed in the wake of the oscillating cylinder compared to a scenario without the cylinder's wake. A direct relationship has been found between the strouhal number ($St$) of the flapping airfoil and its pitching amplitude, which significantly influences the airfoil's performance. This analysis highlights the potential for optimizing flapping airfoil efficiency through strategic selection of flapping parameters and the placement of an oscillating cylinder.

physics.flu-dyn↗

arXiv2024

OpenFMR: A low-cost open-source broadband ferromagnetic resonance spectrometer

We describe a broadband ferromagnetic resonance spectrometer for scientific and educational applications with a frequency range up to 30 GHz. It is built with low-cost components available off-the-shelf and utilizes 3D printed parts for sample holders and support structures, and requires little assembly. A PCB design for the grounded coplanar waveguide (GCPW) is presented and analysed. We further include a software suite for command-line or script driven data acqusition, a graphical user interface, and a graphical data analysis program. The capabilities of the system design are demonstrated with measurements on ferromagnetic thin films with a thickness of 1 nm. All designs and scripts are published under the GNU GPL v3.0 license.

cond-mat.mtrl-sci↗

arXiv2024

Composition, Structure and Origin of the Moon

Here we critically examine the geophysical and geochemical properties of the Moon in order to identify the extent to which dynamical scenarios satisfy these observations. New joint inversions of existing lunar geophysical data (mean mass, moment of inertia, and tidal response) assuming a laterally- and vertically homogeneous lunar mantle show that, in all cases, a core with a radius of 300$\pm$20 km ($\sim$0.8 to 1.5 % the mass of the Moon) is required. However, an Earth-like Mg# (0.89) in the lunar mantle results in core densities (7800$\pm$100 kg/m$^3$) consistent with that of Fe-Ni alloy, whereas FeO-rich compositions (Mg# = 0.80--0.84) require lower densities (6100$\pm$800 kg/m$^3$). Geochemically, we use new data on mare basalts to reassess the bulk composition of the Moon for 70 elements, and show that the lunar core likely formed near 5 GPa, 2100 K and $\sim$1 log unit below the iron-w\"ustite buffer. Moreover, the Moon is depleted relative to the Earth's mantle in elements with volatilities higher than that of Li, with this volatile loss likely having occurred at low temperatures (1400$\pm$100 K), consistent with mass-dependent stable isotope fractionation of moderately volatile elements (e.g., Zn, K, Rb). The identical nucleosynthetic (O, Cr, Ti) and radiogenic (W) isotope compositions of the lunar and terrestrial mantles, strongly suggest the two bodies were made from the same material, rather than from an Earth-like impactor. Rb-Sr in FANs and Lu-Hf and Pb-Pb zircon ages point Moon formation close to $\sim$4500 Ma. Taken together, there is no unambiguous geochemical or isotopic evidence for the role of an impactor in the formation of the Moon, implying perfect equilibration between the proto-Earth and Moon-forming material or alternative scenarios for its genesis.

astro-ph.EP↗

arXiv2022

Tidal insights into rocky and icy bodies: An introduction and overview

Solid body tides provide key information on the interior structure, evolution, and origin of the planetary bodies. Our Solar system harbours a very diverse population of planetary bodies, including those composed of rock, ice, gas, or a mixture of all. While a rich arsenal of geophysical methods has been developed over several years to infer knowledge about the interior of the Earth, the inventory of tools to investigate the interiors of other Solar-system bodies remains limited. With seismic data only available for the Earth, the Moon, and Mars, geodetic measurements, including the observation of the tidal response, have become especially valuable and therefore, has played an important role in understanding the interior and history of several Solar system bodies. To use tidal response measurements as a means to obtain constraints on the interior structure of planetary bodies, appropriate understanding of the viscoelastic reaction of the materials from which the planets are formed is needed. Here, we review the fundamental aspects of the tidal modeling and the information on the present-day interior properties and evolution of several planets and moons based on studying their tidal response. We begin with an outline of the theory of viscoelasticity and tidal response. Next, we proceed by discussing the information on the tidal response and the inferred structure of Mercury, Venus, Mars and its moons, the Moon, and the largest satellites of giant planets, obtained from the analysis of the data that has been provided by space missions. We also summarise the upcoming possibilities offered by the currently planned missions.

astro-ph.EP↗

arXiv2021

Hybrid Method for Simulation of a Fractional COVID-19 Model with Real Case Application

In this research, we provide a mathematical analysis for the novel coronavirus responsible for COVID-19, which continues to be a big source of threat for humanity. Our fractional-order analysis is carried out using a non-singular kernel type operator known as the Atangana--Baleanu--Caputo (ABC) derivative. We parametrize the model adopting available information of the disease from Pakistan in the period 9th April to 2nd June 2020. We obtain the required solution with the help of a hybrid method, which is a combination of the decomposition method and the Laplace transform. Furthermore, a sensitivity analysis is carried out to evaluate the parameters that are more sensitive to the basic reproduction number of the model. Our results are compared with the real data of Pakistan and numerical plots are presented at various fractional orders.

math.DS↗

arXiv2021

The Tidal-Thermal Evolution of the Pluto-Charon System

Existence of subsurface oceans on the satellites of the giant planets and Trans-Neptunian objects has been predicted for some time. Oceans on icy worlds exert a considerable influence on the dynamics of the ice-ocean system and, because of the astrobiological potential, represent an important objective for future missions. The Pluto-Charon system is representative of an icy moon orbiting a dwarf planet formed from the remnants of a giant impact. Evolution of icy moons is primarily controlled by the mode and efficiency of heat transfer through the outer ice shell, which is influenced by the presence of impurities, by tidal dissipation in the ice shell, and the radioactive element budget in the core. Previous studies on the evolution of the Pluto-Charon system considered either only the thermal or the tidal evolution, and in the cases where both were considered, the important effect of the presence of impurities in the liquid oceans was not addressed. We consider the joint tidal-thermal evolution of the system by combining a comprehensive tidal model that incorporates a viscoelastic tidal response with a parameterized convection model developed for icy worlds. This approach enables an extensive analysis of the conditions required for formation and maintenance of subsurface liquid oceans to the present. Our results show that because of fast circularization and synchronization of the orbits, tidal heating is only important during the early stages of evolution (<1 Myr). We test the sensitivity of our results to the initial orbital and thermal parameters. In all the cases, oceans on Pluto are always predicted to remain liquid to the present, ranging from 40 km to 150-km thick, whereas oceans on Charon have solidified. This is supported by New Horizons observations of extensional faults on Pluto and both extensional and compressional faults on Charon.

astro-ph.EP↗

arXiv2019

Fully Dense UNet for 2D Sparse Photoacoustic Tomography Artifact Removal

Photoacoustic imaging is an emerging imaging modality that is based upon the photoacoustic effect. In photoacoustic tomography (PAT), the induced acoustic pressure waves are measured by an array of detectors and used to reconstruct an image of the initial pressure distribution. A common challenge faced in PAT is that the measured acoustic waves can only be sparsely sampled. Reconstructing sparsely sampled data using standard methods results in severe artifacts that obscure information within the image. We propose a modified convolutional neural network (CNN) architecture termed Fully Dense UNet (FD-UNet) for removing artifacts from 2D PAT images reconstructed from sparse data and compare the proposed CNN with the standard UNet in terms of reconstructed image quality.

cs.CV↗

arXiv2015

Can we constrain interior structure of rocky exoplanets from mass and radius measurements?

We present an inversion method based on Bayesian analysis to constrain the interior structure of terrestrial exoplanets, in the form of chemical composition of the mantle and core size. Specifically, we identify what parts of the interior structure of terrestrial exoplanets can be determined from observations of mass, radius, and stellar elemental abundances. We perform a full probabilistic inverse analysis to formally account for observational and model uncertainties and obtain confidence regions of interior structure models. This enables us to characterize how model variability depends on data and associated uncertainties. We test our method on terrestrial solar system planets and find that our model predictions are consistent with independent estimates. Furthermore, we apply our method to synthetic exoplanets up to 10 Earth masses and up to 1.7 Earth radii as well as to exoplanet Kepler-36b. Importantly, the inversion strategy proposed here provides a framework for understanding the level of precision required to characterize the interior of exoplanets. Our main conclusions are: (1) observations of mass and radius are sufficient to constrain core size; (2) stellar elemental abundances (Fe, Si, Mg) are key constraints to reduce degeneracy in interior structure models and to constrain mantle composition; (3) the inherent degeneracy in determining interior structure from mass and radius observations does not only depend on measurement accuracies but also on the actual size and density of the exoplanet. We argue that precise observations of stellar elemental abundances are central in order to place constraints on planetary bulk composition and to reduce model degeneracy. [...]

astro-ph.EP↗