arXiv subjects

Amirali Arabmoheghi

Publications and source records attributed to Amirali Arabmoheghi.

6 recordsLinked to original sources

arXiv2026

On-Chip Frequency Noise Cancellation in Nanomechanical Resonators using Cavity Optomechanics

Understanding and minimizing the sources of frequency noise in nanomechanical resonators is crucial for many sensing applications. In this work, we report an ultracoherent perimeter-mode nanomechanical resonator co-integrated with an on-chip optical cavity. This device combines low thermomechanical force noise and low detector noise, allowing us to study its intrinsic frequency fluctuations in detail. We find that the fluctuations of two mechanical modes are strongly correlated. Moreover, we demonstrate the generation of a signal at the frequency difference between the two modes directly on chip via nonlinear optomechanical transduction. This `difference signal' has vastly reduced intrinsic frequency fluctuations and can be used for frequency tracking with high precision, as we establish in a proof-of-principle experiment.

physics.optics↗

arXiv2025

Noncontact friction in ultracoherent nanomechanical resonators near dielectric materials

Micro- and nanomechanical resonators are emerging as promising platforms for quantum technologies, precision sensors and fundamental science experiments. To utilize these devices for force sensing or quantum optomechanics, they must be brought in close proximity with other systems for functionalization or efficient readout. Improved understanding of the loss mechanisms in nanomechanical resonators, specifically the advent of dissipation dilution, has led to the development of resonators with unprecedented coherence properties. The mechanical quality factors of this new class of ultracoherent micro- and nanomechanical oscillators can now exceed 1 billion at room temperature, setting their force sensitivities below 1 $\mathrm{aN}/\sqrt{\mathrm{Hz}}$, surpassing those of the state-of-the-art atomic force microscopes (AFMs). Given this new regime of sensitivity, an intriguing question is whether the proximity of other materials hinders mechanical coherence. Here we show: it does. We report a novel dissipation mechanism that occurs in ultracoherent nanomechanical oscillators caused by the presence of nearby dielectrics. By studying the parameter scaling of the effect, we show that the mechanism is more severe for low-frequency mechanical modes and that it is due to dielectric loss within the materials caused by the motion of a resonator which carries static charges. Our observations are consistent with the noncontact friction (NCF) observed in AFMs. Our findings provide insights into limitations on the integration of ultracoherent nanomechanical resonators and highlight the adverse effects of charged defects in these systems.

cond-mat.mes-hall↗

arXiv2024

Motional sideband asymmetry of a solid-state mechanical resonator at room temperature

The motional sideband asymmetry of a mechanical oscillator interacting with a laser field can be observed when approaching the quantum ground state, where the zero-point energy of the mechanical oscillator becomes a sizable contribution to its motion. In the context of quantum optomechanics, it allows, in principle, calibration-free inference of the thermal equilibrium of a macroscopic mechanical resonator with its optical bath. At room temperature, this phenomenon has been observed in pioneering experiments using levitated nanoparticles. Measuring this effect with solid-state mechanical resonators has been compounded by thermal intermodulation noise, mirror frequency noise and low quantum cooperativity. Here, we sideband-cool a membrane-in-the-middle system close to the quantum ground state from room temperature, and observe motional sideband asymmetry in a dual-homodyne measurement. Sideband thermometry yields a minimum phonon occupancy of $\bar{n}_{eff}=9.5$. Our work provides insights into nonlinear optomechanical dynamics at room temperature and facilitates accessible optomechanical quantum technologies without the need for complex feedback control and cryogenic cooling.

quant-ph↗

arXiv2022

Hierarchical tensile structures with ultralow mechanical dissipation

Structural hierarchy is found in myriad biological systems and has improved man-made structures ranging from the Eiffel tower to optical cavities. Hierarchical metamaterials utilize structure at multiple size scales to realize new and highly desirable properties which can be strikingly different from those of the constituent materials. In mechanical resonators whose rigidity is provided by static tension, structural hierarchy can reduce the dissipation of the fundamental mode to ultralow levels due to an unconventional form of soft clamping. Here, we apply hierarchical design to silicon nitride nanomechanical resonators and realize binary tree-shaped resonators with quality factors as high as $10^9$ at 107 kHz frequency, reaching the parameter regime of levitated particles. The resonators' thermal-noise-limited force sensitivities reach $740\ \mathrm{zN/\sqrt{Hz}}$ at room temperature and $\mathrm{90\ zN/\sqrt{Hz}}$ at 6 K, surpassing state-of-the-art cantilevers currently used for force microscopy. We also find that the self-similar structure of binary tree resonators results in fractional spectral dimensions, which is characteristic of fractal geometries. Moreover, we show that the hierarchical design principles can be extended to 2D trampoline membranes, and we fabricate ultralow dissipation membranes suitable for interferometric position measurements in Fabry-Pérot cavities. Hierarchical nanomechanical resonators open new avenues in force sensing, signal transduction and quantum optomechanics, where low dissipation is paramount and operation with the fundamental mode is often advantageous.

cond-mat.mes-hall↗

arXiv2021

Nanomechanical resonators with ultra-high-$Q$ perimeter modes

Systems with low mechanical dissipation are extensively used in precision measurements such as gravitational wave detection, atomic force microscopy and quantum control of mechanical oscillators via opto- and electromechanics. The mechanical quality factor ($Q$) of these systems determines the thermomechanical force noise and the thermal decoherence rate of mechanical quantum states. While the dissipation rate is typically set by the bulk acoustic properties of the material, by exploiting dissipation dilution, mechanical $Q$ can be engineered through geometry and increased by many orders of magnitude. Recently, soft clamping in combination with strain engineering has enabled room temperature quality factors approaching one billion ($10^9$) in millimeter-scale resonators. Here we demonstrate a new approach to soft clamping which exploits vibrations in the perimeter of polygon-shaped resonators tethered at their vertices. In contrast to previous approaches, which rely on cascaded elements to achieve soft clamping, perimeter modes are soft clamped due to symmetry and the boundary conditions at the polygon vertices. Perimeter modes reach $Q$ of 3.6 billion at room temperature while spanning only two acoustic wavelengths -- a 4-fold improvement over the state-of-the-art mechanical $Q$ with 10-fold smaller devices. The small size of our devices makes them well-suited for near-field integration with microcavities for quantum optomechanical experiments. Moreover, their compactness allows the realization of phononic lattices. We demonstrate a one-dimensional Su-Schrieffer-Heeger chain of high-$Q$ perimeter modes coupled via nearest-neighbour interaction and characterize the localized edge modes.

physics.app-ph↗

arXiv2020

Thermal intermodulation noise in cavity-based measurements

Thermal frequency fluctuations in optical cavities limit the sensitivity of precision experiments ranging from gravitational wave observatories to optical atomic clocks. Conventional modeling of these noises assumes a linear response of the optical field to the fluctuations of cavity frequency. Fundamentally, however, this response is nonlinear. Here we show that nonlinearly transduced thermal fluctuations of cavity frequency can dominate the broadband noise in photodetection, even when the magnitude of fluctuations is much smaller than the cavity linewidth. We term this noise "thermal intermodulation noise" and show that for a resonant laser probe it manifests as intensity fluctuations. We report and characterize thermal intermodulation noise in an optomechanical cavity, where the frequency fluctuations are caused by mechanical Brownian motion, and find excellent agreement with our developed theoretical model. We demonstrate that the effect is particularly relevant to quantum optomechanics: using a phononic crystal $Si_3N_4$ membrane with a low mass, soft-clamped mechanical mode we are able to operate in the regime where measurement quantum backaction contributes as much force noise as the thermal environment does. However, in the presence of intermodulation noise, quantum signatures of measurement are not revealed in direct photodetectors. The reported noise mechanism, while studied for an optomechanical system, can exist in any optical cavity.

physics.optics↗