arXiv subjects

Amirhassan Shams-Ansari

Publications and source records attributed to Amirhassan Shams-Ansari.

34 records · Page 2Linked to original sources

arXiv2021

Electrically-pumped high-power laser transmitter integrated on thin-film lithium niobate

Integrated thin-film lithium niobate (TFLN) photonics has emerged as a promising platform for realization of high-performance chip-scale optical systems. Of particular importance are TFLN electro-optic modulators featuring high-linearity, low driving voltage and lowpropagation loss. However, fully integrated system requires integration of high power, low noise, and narrow linewidth lasers on TFLN chip. Here we achieve this goal, and demonstrate integrated high-power lasers on TFLN platform with up to 60 mW of optical power in the waveguides. We use this platform to realize a highpower transmitter consisting an electrically-pumped laser integrated with a 50 GHz modulator.

physics.app-ph↗

arXiv2021

Gigahertz free-space electro-optic modulators based on Mie resonances

Electro-optic modulators from non-linear $χ^{(2)}$ materials are essential for sensing, metrology and telecommunications because they link the optical domain with the microwave domain. At present, most geometries are suited for fiber applications. In contrast, architectures that modulate directly free-space light at gigahertz (GHz) speeds have remained very challenging, despite their dire need for active free-space optics, in diffractive computing or for optoelectronic feedback to free-space emitters. They are typically bulky or suffer from much reduced interaction lengths. Here, we employ an ultrathin array of sub-wavelength Mie resonators that support quasi bound states in the continuum (BIC) as a key mechanism to demonstrate electro-optic modulation of free-space light with high efficiency at GHz speeds. Our geometry relies on hybrid silicon-organic nanostructures that feature low loss ($Q = $ 550 at $λ_{res} = 1594$ nm) while being integrated with GHz-compatible coplanar waveguides. We maximize the electro-optic effect by using high-performance electro-optic molecules (whose electro-optic tensor we engineer in-device to exploit $r_{33} = 100$ pm/V) and by nanoscale optimization of the optical modes. We demonstrate both DC tuning and high speed modulation up to 5~GHz ($f_{EO,-3 dB} =3$ GHz) and shift the resonant frequency of the quasi-BIC by $Δλ_{res}=$11 nm, surpassing its linewidth. We contrast the properties of quasi-BIC modulators by studying also guided mode resonances that we tune by $Δλ_{res}=$20 nm. Our approach showcases the potential for ultrathin GHz-speed free-space electro-optic modulators.

physics.optics↗

arXiv2021

Integrated photonics on thin-film lithium niobate

Lithium niobate (LN), an outstanding and versatile material, has influenced our daily life for decades: from enabling high-speed optical communications that form the backbone of the Internet to realizing radio-frequency filtering used in our cell phones. This half-century-old material is currently embracing a revolution in thin-film LN integrated photonics. The success of manufacturing wafer-scale, high-quality, thin films of LN on insulator (LNOI), accompanied with breakthroughs in nanofabrication techniques, have made high-performance integrated nanophotonic components possible. With rapid development in the past few years, some of these thin-film LN devices, such as optical modulators and nonlinear wavelength converters, have already outperformed their legacy counterparts realized in bulk LN crystals. Furthermore, the nanophotonic integration enabled ultra-low-loss resonators in LN, which unlocked many novel applications such as optical frequency combs and quantum transducers. In this Review, we cover -- from basic principles to the state of the art -- the diverse aspects of integrated thin-film LN photonics, including the materials, basic passive components, and various active devices based on electro-optics, all-optical nonlinearities, and acousto-optics. We also identify challenges that this platform is currently facing and point out future opportunities. The field of integrated LNOI photonics is advancing rapidly and poised to make critical impacts on a broad range of applications in communication, signal processing, and quantum information.

physics.optics↗

arXiv2020

Reconfigurable electro-optic frequency shifter

Here we demonstrate an on-chip electro-optic frequency shifter that is precisely controlled using only a single-tone microwave signal. This is accomplished by engineering the density of states of, and coupling between, optical modes in ultra-low loss electro-optic waveguides and resonators realized in lithium niobate nanophotonics. Our device provides frequency shifts as high as 28 GHz with measured shift efficiencies of ~99% and insertion loss of <0.5 dB. Importantly, the device can be reconfigured as a tunable frequency-domain beam splitter, in which the splitting ratio and splitting frequency are controlled by microwave power and frequency, respectively. Using the device, we also demonstrate (non-blocking) frequency routing through an efficient exchange of information between two distinct frequency channels, i.e. swap operation. Finally, we show that our scheme can be scaled to achieve cascaded frequency shifts beyond 100 GHz. Our device could become an essential building-block for future high-speed and large-scale classical information processors as well as emerging frequency-domain photonic quantum computers.

physics.optics↗

arXiv2020

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, leveraging the low optical loss and strong EO coupling in this platform. We demonstrate a transduction efficiency of up to $2.7\times10^{-5}$, and a pump-power normalized efficiency of $1.9\times10^{-6}/\mathrm{μW}$. The transduction efficiency can be improved by further reducing the microwave resonator's piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.

quant-ph↗

arXiv2020

An integrated lithium-niobate electro-optic platform for spectrally tailored dual-comb spectroscopy

A high-resolution broad-spectral-bandwidth spectrometer on a chip would create new opportunities for gas-phase molecular fingerprinting, especially in environmental sensing. A resolution high enough to observe transitions at atmospheric pressure and the simultaneous sensitive detection of multiple atoms or molecules are the key challenges. Here, an electro-optic microring-based dual-comb interferometer, fabricated on a low-loss lithium-niobate-on-insulator nanophotonic platform, demonstrates significant progress towards such an achievement. Spectra spanning 1.6 THz (53 cm-1) at a resolution of 10 GHz (0.33 cm-1) are obtained in a single measurement without requiring frequency scanning or moving parts. The frequency agility of the system enables spectrally-tailored multiplexed sensing, which allows for interrogation of non-adjacent spectral regions, here separated by 6.6 THz (220 cm-1), without compromising the signal-to-noise ratio.

physics.app-ph↗

arXiv2019

High-dimensional frequency crystals and quantum walks in electro-optic microcombs

Synthetic optical structures have enabled studies of various physical processes and discoveries of new phenomena in a controllable manner. Past realizations, using for example coupled optical waveguides, were however limited in size and dimensionality. Here we theoretically propose and experimentally demonstrate optical frequency crystals of arbitrary dimensions, formed by hundreds of coupled spectral modes within an on-chip electro-optic frequency comb. We show a direct link between the measured optical transmission spectrum and the density-of-state of frequency crystals, validated by measurements of one-, two-, three- and four-dimensional crystals with no restrictions to further expand the dimensionality. We measure signatures of quantum random walks and Bloch oscillations in the frequency domain of light in one- and two-dimensional synthetic lattices. Our work employs a quantum description of phase modulation11 to describe resonant electro-optic frequency combs, and shows that they enable the study of exotic crystal properties, topologies and quantum dynamics, while providing a versatile platform to manipulate quantum information in the optical frequency domain.

physics.optics↗

arXiv2019

Microwave-to-optical conversion using lithium niobate thin-film acoustic resonators

We demonstrate conversion of up to 4.5 GHz-frequency microwaves to 1500 nm-wavelength light using optomechanical interactions on suspended thin-film lithium niobate. Our method utilizes an interdigital transducer that drives a free-standing 100 $μ$m-long thin-film acoustic resonator to modulate light travelling in a Mach-Zehnder interferometer or racetrack cavity. Owing to the strong microwave-to-acoustic coupling offered by the transducer in conjunction with the strong photoelastic, piezoelectric, and electro-optic effects of lithium niobate, we achieve a half-wave voltage of $V_π$ = 4.6 V and $V_π$ = 0.77 V for the Mach-Zehnder interferometer and racetrack resonator, respectively. The acousto-optic racetrack cavity exhibits an optomechancial single-photon coupling strength of 1.1 kHz. Our integrated nanophotonic platform coherently leverages the compelling properties of lithium niobate to achieve microwave-to-optical transduction. To highlight the versatility of our system, we also demonstrate a lossless microwave photonic link, which refers to a 0 dB microwave power transmission over an optical channel.

physics.app-ph↗

arXiv2019

Supercontinuum generation in angle-etched diamond waveguides

We experimentally demonstrate on-chip supercontinuum generation in the visible region in angle etched diamond waveguides. We measure an output spectrum spanning 670 nm to 920 nm in a 5mm long waveguide using 100 fs pulses with 187 pJ of incident pulse energy. Our fabrication technique, combined with diamonds broad transparency window, offers a potential route toward broadband supercontinuum generation in the UV domain.

physics.optics↗

arXiv2019

Phononic band structure engineering for high-Q gigahertz surface acoustic wave resonators on lithium niobate

Phonons at gigahertz frequencies interact with electrons, photons, and atomic systems in solids, and therefore have extensive applications in signal processing, sensing, and quantum technologies. Surface acoustic wave (SAW) resonators that confine surface phonons can play a crucial role in such integrated phononic systems due to small mode size, low dissipation, and efficient electrical transduction. To date, it has been challenging to achieve high quality (Q) factor and small phonon mode size for SAW resonators at gigahertz frequencies. Here, we present a methodology to design compact high-Q SAW resonators on lithium niobate operating at gigahertz frequencies. We experimentally verify out designs and demonstrate Q factors in excess of $2\times10^4$ at room temperature ($6\times10^4$ at 4 Kelvin) and mode area as low as $1.87 λ^2$. This is achieved by phononic band structure engineering, which provides high confinement with low mechanical loss. The frequency-Q products (fQ) of our SAW resonators are greater than $10^{13}$. These high-fQ and small mode size SAW resonators could enable applications in quantum phononics and integrated hybrid systems with phonons, photons, and solid-state qubits.

cond-mat.mes-hall↗

arXiv2019

Ultra-low loss integrated visible photonics using thin-film lithium niobate

Integrated photonics is a powerful platform that can improve the performance and stability of optical systems, while providing low-cost, small-footprint and scalable alternatives to implementations based on free-space optics. While great progress has been made on the development of low-loss integrated photonics platforms at telecom wavelengths, visible wavelength range has received less attention. Yet, many applications utilize visible or near-visible light, including those in optical imaging, optogenetics, and quantum science and technology. Here we demonstrate an ultra-low loss integrated visible photonics platform based on thin film lithium niobate on insulator. Our waveguides feature ultra-low propagation loss of 6 dB/m, while our microring resonators have an intrinsic quality factor of 11 million, both measured at 637 nm wavelength. Additionally, we demonstrate an on-chip visible intensity modulator with an electro-optic bandwidth of 10 GHz, limited by the detector used. The ultra-low loss devices demonstrated in this work, together with the strong second- and third-order nonlinearities in lithium niobate, open up new opportunities for creating novel passive, and active devices for frequency metrology and quantum information processing in the visible spectrum range.

physics.app-ph↗

arXiv2019

Low-loss fiber-to-chip interface for lithium niobate photonic integrated circuits

Integrated lithium niobate (LN) photonic circuits have recently emerged as a promising candidate for advanced photonic functions such as high-speed modulation, nonlinear frequency conversion and frequency comb generation. For practical applications, optical interfaces that feature low fiber-to-chip coupling losses are essential. So far, the fiber-to-chip loss (commonly > 10 dB) dominates the total insertion losses of typical LN photonic integrated circuits, where on-chip propagation losses can be as low as 0.03 - 0.1 dB/cm. Here we experimentally demonstrate a low-loss mode size converter for coupling between a standard lensed fiber and sub-micrometer LN rib waveguides. The coupler consists of two inverse tapers that convert the small optical mode of a rib waveguide into a symmetric guided mode of a LN nanowire, featuring a larger mode area matched to that of a tapered optical fiber. The measured fiber-to-chip coupling loss is lower than 1.7 dB/facet with high fabrication tolerance and repeatability. Our results open door for practical integrated LN photonic circuits efficiently interfaced with optical fibers.

physics.app-ph↗

arXiv2018

Electronically Programmable Photonic Molecule

Physical systems with discrete energy levels are ubiquitous in nature and are fundamental building blocks of quantum technology. Realizing controllable artifcial atom- and molecule-like systems for light would allow for coherent and dynamic control of the frequency, amplitude and phase of photons. In this work, we demonstrate a photonic molecule with two distinct energy-levels and control it by external microwave excitation. We show signature two-level dynamics including microwave induced photonic Autler-Townes splitting, Stark shift, Rabi oscillation and Ramsey interference. Leveraging the coherent control of optical energy, we show on-demand photon storage and retrieval in optical microresonators by reconfguring the photonic molecule into a bright-dark mode pair. These results of dynamic control of light in a programmable and scalable electro-optic platform open doors to applications in microwave photonic signal processing, quantum photonics in the frequency domain, optical computing concepts and simulations of complex physical systems.

physics.optics↗

arXiv2018

Broadband electro-optic frequency comb generation in an integrated microring resonator

Optical frequency combs consist of equally spaced discrete optical frequency components and are essential tools for optical communications and for precision metrology, timing and spectroscopy. To date, wide-spanning combs are most often generated by mode-locked lasers or dispersion-engineered resonators with third-order Kerr nonlinearity. An alternative comb generation method uses electro-optic (EO) phase modulation in a resonator with strong second-order nonlinearity, resulting in combs with excellent stability and controllability. Previous EO combs, however, have been limited to narrow widths by a weak EO interaction strength and a lack of dispersion engineering in free-space systems. In this work, we overcome these limitations by realizing an integrated EO comb generator in a thin-film lithium niobate photonic platform that features a large electro-optic response, ultra-low optical loss and highly co-localized microwave and optical felds, while enabling dispersion engineering. Our measured EO frequency comb spans more than the entire telecommunications L-band (over 900 comb lines spaced at ~ 10 GHz), and we show that future dispersion engineering can enable octave-spanning combs. Furthermore, we demonstrate the high tolerance of our comb generator to modulation frequency detuning, with frequency spacing finely controllable over seven orders of magnitude (10 Hz to 100 MHz), and utilize this feature to generate dual frequency combs in a single resonator. Our results show that integrated EO comb generators, capable of generating wide and stable comb spectra, are a powerful complement to integrated Kerr combs, enabling applications ranging from spectroscopy to optical communications.

physics.optics↗

arXiv2017

An integrated diamond Raman laser pumped in the near-visible

Using a high-Q diamond microresonator (Q > 300,000) interfaced with high-power-handling directly-written doped-glass waveguides, we demonstrate a Raman laser in an integrated platform pumped in the near-visible. Both TM-to-TE and TE-to-TE lasing is observed, with a Raman lasing threshold as low as 20 mW and Stokes power of over 1 mW at 120 mW pump power. Stokes emission is tuned over a 150 nm (60 THz) bandwidth around 875 nm wavelength, corresponding to 17.5% of the center frequency.

physics.optics↗

arXiv2017

Monolithic Ultrahigh-Q Lithium Niobate Microring Resonator

We demonstrate an ultralow loss monolithic integrated lithium niobate photonic platform consisting of dry-etched subwavelength waveguides. We show microring resonators with a quality factor of 10$^7$ and waveguides with propagation loss as low as 2.7 dB/m.

physics.optics↗