arXiv subjects

Amirreza Khodadadian

Publications and source records attributed to Amirreza Khodadadian.

13 recordsLinked to original sources

arXiv2023

Analysis of a fully discretized FDM-FEM scheme for solving thermo-elastic-damage coupled nonlinear PDE systems

In this paper, we consider a nonlinear PDE system governed by a parabolic heat equation coupled in a nonlinear way with a hyperbolic momentum equation describing the behavior of a displacement field coupled with a nonlinear elliptic equation based on an internal damage variable. We present a numerical scheme based on a low-order Galerkin finite element method (FEM) for the space discretization of the time-dependent nonlinear PDE system and an implicit finite difference method (FDM) to discretize in the direction of the time variable. Moreover, we present a priori estimates for the exact and discrete solutions for the pointwise-in-time $L^2$-norm. Based on the a priori estimates, we rigorously prove the convergence of the solutions of the fully discretized system to the exact solutions. Denoting the properties of the internal parameters, we find the order of convergence concerning the discretization parameters.

math.NA↗

arXiv2023

Hierarchical LU preconditioning for the time-harmonic Maxwell equations

The time-harmonic Maxwell equations are used to study the effect of electric and magnetic fields on each other. Although the linear systems resulting from solving this system using FEMs are sparse, direct solvers cannot reach the linear complexity. In fact, due to the indefinite system matrix, iterative solvers suffer from slow convergence. In this work, we study the effect of using the inverse of $\CH$-matrix approximations of the Galerkin matrices arising from Nédélec's edge FEM discretization to solve the linear system directly. We also investigate the impact of applying an $\mathcal{H}-LU$ factorization as a preconditioner and we study the number of iterations to solve the linear system using iterative solvers.

math.NA↗

arXiv2023

Global-Local Forward Models within Bayesian Inversion for Large Strain Fracturing in Porous Media

In this work, Bayesian inversion with global-local forwards models is used to identify the parameters based on hydraulic fractures in porous media. It is well-known that using Bayesian inversion to identify material parameters is computationally expensive. Although each sampling may take more than one hour, thousands of samples are required to capture the target density. Thus, instead of using fine-scale high-fidelity simulations, we use a non-intrusive global-local (GL) approach for the forward model. We further extend prior work to a large deformation setting based on the Neo-Hookean strain energy function. The resulting framework is described in detail and substantiated with some numerical tests.

math.NA↗

arXiv2022

Probabilistic failure mechanisms via Monte Carlo simulations of complex microstructures

A probabilistic approach to phase-field brittle and ductile fracture with random material and geometric properties is proposed within this work. In the macroscopic failure mechanics, materials properties and exactness of spatial quantities (of different phases in the geometrical domain) are assumed to be homogeneous and deterministic. This is unlike the lower-scale with strong fluctuation in the material and geometrical properties. Such a response is approximated through some uncertainty in the model problem. The presented contribution is devoted to providing a mathematical framework for modeling uncertainty through stochastic analysis of a microstructure undergoing brittle/ductile failure. Hereby, the proposed model employs various representative volume elements with random distribution of stiff-inclusions and voids within the composite structure. We develop an allocating strategy to allocate the heterogeneities and generate the corresponding meshes in two- and three-dimensional cases. Then the Monte Carlo finite element technique is employed for solving the stochastic PDE-based model and approximate the expectation and the variance of the solution field of brittle/ductile failure by evaluating a large number of samples. For the prediction of failure mechanisms, we rely on the phase-field approach which is a widely adopted framework for modeling and computing the fracture phenomena in solids. Incremental perturbed minimization principles for a class of gradient-type dissipative materials are used to derive the perturbed governing equations. This analysis enables us to study the highly heterogeneous microstructure and monitor the uncertainty in failure mechanics. Several numerical examples are given to examine the efficiency of the proposed method.

math.NA↗

arXiv2021

Bayesian inversion for unified ductile phase-field fracture

The prediction of crack initiation and propagation in ductile failure processes are challenging tasks for the design and fabrication of metallic materials and structures on a large scale. Numerical aspects of ductile failure dictate a sub-optimal calibration of plasticity- and fracture-related parameters for a large number of material properties. These parameters enter the system of partial differential equations as a forward model. In this work, we develop a step-wise Bayesian inversion framework for ductile fracture to provide accurate knowledge regarding the effective mechanical parameters. To this end, synthetic and experimental observations are used to estimate the posterior density of the unknowns. To model the ductile failure behavior of solid materials, we rely on the phase-field approach to fracture, for which we present a unified formulation that allows recovering different models on a variational basis. In the variational framework, incremental minimization principles for a class of gradient-type dissipative materials are used to derive the governing equations. The overall formulation is revisited and extended to the case of anisotropic ductile fracture. Three different models are subsequently recovered by certain choices of parameters and constitutive functions, which are later assessed through Bayesian inversion techniques. To estimate the posterior density function of ductile material parameters, three common Markov chain Monte Carlo (MCMC) techniques are employed: (i) the Metropolis-Hastings algorithm, (ii) delayed-rejection adaptive Metropolis, and (iii) ensemble Kalman filter combined with MCMC. To examine the computational efficiency of the MCMC methods, we employ the R-convergence tool.

math.NA↗

arXiv2020

Bayesian Inversion for Anisotropic Hydraulic Phase-Field Fracture

In this work, a Bayesian inversion framework for hydraulic phase-field transversely isotropic and orthotropy anisotropic fracture is proposed. Therein, three primary fields are pressure, displacements, and phase-field while direction-dependent responses are enforced (via penalty-like parameters). A new crack driving state function is introduced by avoiding the compressible part of anisotropic energy to be degraded. For the Bayesian inversion, we employ the delayed rejection adaptive Metropolis (DRAM) algorithm to identify the parameters. We adjust the algorithm to estimate parameters according to a hydraulic fracture observation, i.e., the maximum pressure. The focus is on uncertainties arising from different variables, including elasticity modulus, Biot's coefficient, Biot's modulus, dynamic fluid viscosity, and Griffith's energy release rate in the case of the isotropic hydraulic fracture while in the anisotropic setting, we identify additional penalty-like parameters. Several numerical examples are employed to substantiate our algorithmic developments.

cs.CE↗

arXiv2020

Frequency dependence of dielectrophoresis fabrication of single-walled carbon nanotube field-effect transistor

In this paper, we present a new theoretical model for the dielectrophoresis (DEP) process of the single-walled carbon nanotubes (SWCNT). We obtain a different frequency interval for the alignment of wide energy gap semiconductor SWCNTs which shows a considerable difference with the prevalent model. For this, we study two specific models namely, the spherical model and the ellipsoid model to estimate the frequency interval. Then, we perform the DEP process and use the obtained frequencies (of spherical and ellipsoid models) for the alignment of the SWCNTs. Our empirical results declare the theoretical prediction, i.e., a crucial step toward the realization of carbon nanotube field-effect transistor (CNT-FET) with the DEP process based on the ellipsoid model.

physics.app-ph↗

arXiv2020

A Bayesian estimation method for variational phase-field fracture problems

In this work, we propose a parameter estimation framework for fracture propagation problems. The fracture problem is described by a phase-field method. Parameter estimation is realized with a Bayesian framework. Here, the focus is on uncertainties arising in the solid material parameters and the critical energy release rate. A reference value (obtained on a sufficiently small mesh) as the replacement of measurement will be chosen, and their posterior distribution is obtained. Due to time- and mesh dependency of the problem, the computational costs can be high. Using Bayesian inversion, we solve the problem on a relatively coarse mesh and fit the parameters. The obtained load-displacement curve that is usually the target function is matched with the reference values. Finally, our algorithmic approach is substantiated with several numerical examples.

math.NA↗

arXiv2020

An adaptive multilevel Monte Carlo algorithm for the stochastic drift-diffusion-Poisson system

We present an adaptive multilevel Monte Carlo algorithm for solving the stochastic drift-diffusion-Poisson system with non-zero recombination rate. The a-posteriori error is estimated to enable goal-oriented adaptive mesh refinement for the spatial dimensions, while the a-priori error is estimated to guarantee \red{linear} convergence of the $H^1$ error. In the adaptive mesh refinement, efficient estimation of the error indicator gives rise to better error control. For the stochastic dimensions, we use the multilevel Monte Carlo method to solve this system of stochastic partial differential equations. Finally, the advantage of the technique developed here compared to uniform mesh refinement is discussed using a realistic numerical example.

math.NA↗

arXiv2019

Bayesian inversion for nanowire field-effect sensors

Nanowire field-effect sensors have recently been developed for label-free detection of biomolecules. In this work, we introduce a computational technique based on Bayesian estimation to determine the physical parameters of the sensor and, more importantly, the properties of the analyte molecules. To that end, we first propose a PDE based model to simulate the device charge transport and electrochemical behavior. Then, the adaptive Metropolis algorithm with delayed rejection (DRAM) is applied to estimate the posterior distribution of unknown parameters, namely molecule charge density, molecule density, doping concentration, and electron and hole mobilities. We determine the device and molecules properties simultaneously, and we also calculate the molecule density as the only parameter after having determined the device parameters. This approach makes it possible not only to determine unknown parameters, but it also shows how well each parameter can be determined by yielding the probability density function (pdf).

math.NA↗

arXiv2019

Analysis of a Legendre spectral element method (LSEM) for the two-dimensional system of a nonlinear stochastic advection-reaction-diffusion models

In this work, we develop a Legendre spectral element method (LSEM) for solving the stochastic nonlinear system of advection-reaction-diffusion models. The used basis functions are based on a class of Legendre functions such that their mass and diffuse matrices are tridiagonal and diagonal, respectively. The temporal variable is discretized by a Crank--Nicolson finite difference formulation. In the stochastic direction, we also employ a random variable $W$ based on the $Q-$Wiener process. We inspect the rate of convergence and the unconditional stability for the achieved semi-discrete formulation. Then, the Legendre spectral element technique is used to obtain a full-discrete scheme. The error estimation of the proposed numerical scheme is substantiated based upon the energy method. The numerical results confirm the theoretical analysis.

math.NA↗

arXiv2019

Generalized moving least squares and moving kriging least squares approximations for solving the transport equation on the sphere

In this work, we apply two meshless methods for the numerical solution of the time-dependent transport equation defined on the sphere in spherical coordinates. The first technique, which was introduced by Mirzaei (BIT Numerical Mathematics, 54 (4) 1041-1063, 2017) in Cartesian coordinates is a generalized moving least squares approximation, and the second one, which is developed here, is moving kriging least squares interpolation on the sphere. These methods do not depend on the background mesh or triangulation, and they can be implemented on the transport equation in spherical coordinates easily using different distribution points. Furthermore, the time variable is approximated by a second-order backward differential formula. The obtained fully discrete scheme is solved via the biconjugate gradient stabilized algorithm with zero-fill incomplete lower-upper (ILU) preconditioner at each time step. Three well-known test problems namely solid body rotation, vortex roll-up, and deformational flow are solved to demonstrate our developments.

math.NA↗

arXiv2016

The optimal multilevel Monte-Carlo approximation of the stochastic drift-diffusion-Poisson system

Existence and local-uniqueness theorems for weak solutions of a system consisting of the drift-diffusion-Poisson equations and the Poisson-Boltzmann equation, all with stochastic coefficients, are presented. For the numerical approximation of the expected value of the solution of the system, we develop a multi-level Monte-Carlo (MLMC) finite-element method (FEM) and we analyze its rate of convergence and its computational complexity. This allows to find the optimal choice of discretization parameters. Finally, numerical results show the efficiency of the method. Applications are, among others, noise and fluctuations in nanoscale transistors, in field-effect bio- and gas sensors, and in nanopores.

math.AP↗