arXiv subjects

Amit Saha

Publications and source records attributed to Amit Saha.

31 records · Page 2Linked to original sources

arXiv2022

$i$-QER: An Intelligent Approach towards Quantum Error Reduction

Quantum computing has become a promising computing approach because of its capability to solve certain problems, exponentially faster than classical computers. A $n$-qubit quantum system is capable of providing $2^{n}$ computational space to a quantum algorithm. However, quantum computers are prone to errors. Quantum circuits that can reliably run on today's Noisy Intermediate-Scale Quantum (NISQ) devices are not only limited by their qubit counts but also by their noisy gate operations. In this paper, we have introduced $i$-QER, a scalable machine learning-based approach to evaluate errors in a quantum circuit and helps to reduce these without using any additional quantum resources. The $i$-QER predicts possible errors in a given quantum circuit using supervised learning models. If the predicted error is above a pre-specified threshold, it cuts the large quantum circuit into two smaller sub-circuits using an error-influenced fragmentation strategy for the first time to the best of our knowledge. The proposed fragmentation process is iterated until the predicted error reaches below the threshold for each sub-circuit. The sub-circuits are then executed on a quantum device. Classical reconstruction of the outputs obtained from the sub-circuits can generate the output of the complete circuit. Thus, $i$-QER also provides classical control over a scalable hybrid computing approach, which is a combination of quantum and classical computers. The $i$-QER tool is available at https://github.com/SaikatBasu90/i-QER.

quant-ph↗

arXiv2021

Qurzon: A Prototype for a Divide and Conquer Based Quantum Compiler

When working with algorithms on quantum devices, quantum memory becomes a crucial bottleneck due to low qubit count in NISQ-era devices. In this context, the concept of `divide and compute', wherein a quantum circuit is broken into several subcircuits and executed separately, while stitching the results of the circuits via classical post-processing, becomes a viable option, especially in NISQ-era devices. This paper introduces \textbf{Qurzon}, a proposed novel quantum compiler that incorporates the marriage of techniques of divide and compute with the state-of-the-art algorithms of optimal qubit placement for executing on real quantum devices. A scheduling algorithm is also introduced within the compiler that can explore the power of distributed quantum computing while paving the way for quantum parallelism for large algorithms. Several benchmark circuits have been executed using the compiler, thereby demonstrating the power of the divide and compute when working with real NISQ-era quantum devices.

quant-ph↗

arXiv2021

Circuit Design for $k$-coloring Problem and Its Implementation on Near-term Quantum Devices

Nowadays in Quantum Computing, the implementation of quantum algorithm has created a stir since Noisy Intermediate-Scale Quantum (NISQ) devices are out in the market. Researchers are mostly interested in solving NP-complete problems with the help of quantum algorithms for its speed-up. As per the work on computational complexity by Karp \cite{karp}, if any of the NP-complete problem can be solved then any other NP-complete problem can be reduced to that problem in polynomial time. In this Paper, $k$-coloring problem (NP-complete problem) has been considered to solve using Grover's search. A comparator-based approach has been used to implement $k$-coloring problem which enables the reduction of the qubit cost compared to the state-of-the-art. An end-to-end automated framework has been proposed to implement the $k$-coloring problem for any unweighted and undirected graph on any available Noisy Intermediate-Scale Quantum (NISQ) devices, which helps in generalizing our approach.

cs.ET↗

arXiv2021

Circuit Design for Clique Problem and Its Implementation on Quantum Computer

Finding cliques in a graph has several applications for its pattern matching ability. $k$-clique problem, a special case of clique problem, determines whether an arbitrary graph contains a clique of size $k$, has already been addressed in quantum domain. A variant of $k$-clique problem that lists all cliques of size $k$, has also popular modern-day applications. Albeit, the implementation of such variant of $k$-clique problem in quantum setting still remains untouched. In this paper, apart from theoretical solution of such $k$-clique problem, practical quantum gate-based implementation has been addressed using Grover's algorithm. This approach is further extended to design circuit for the maximum clique problem in classical-quantum hybrid architecture. The algorithm automatically generates the circuit for any given undirected and unweighted graph and any given $k$, which makes our approach generalized in nature. The proposed approach of solving $k$-clique problem has exhibited a reduction of qubit cost and circuit depth as compared to the state-of-the-art approach, for a small $k$ with respect to a large graph. A framework that can map the automated generated circuit for clique problem to quantum devices is also proposed. An analysis of the experimental results is demonstrated using IBM's Qiskit.

cs.DS↗

arXiv2021

Faster Search of Clustered Marked States with Lackadaisical Quantum Walks

The nature of discrete-time quantum walk in the presence of multiple marked states has been studied by Nahimovs and Rivosh. They introduced an exceptional configuration of clustered marked states $i.e.,$ if the marked states are arranged in a $\sqrt{k} \times \sqrt{k}$ cluster within a $\sqrt{N} \times \sqrt{N}$ grid, where $k=n^{2}$ and $n$ an odd integer. They showed that finding a single marked state among the multiple ones using quantum walk with AKR (Ambainis, Kempe and Rivosh) coin requires $Ω(\sqrt{N} - \sqrt{k})$ time. Furthermore, Nahimov and Rivosh also showed that the Grover's coin can find the same configuration of marked state both faster and with higher probability compared to that with the AKR coin. In this article, we show that using lackadaisical quantum walk, a variant of a three-state discrete-time quantum walk on a line, the success probability of finding all the clustered marked states of this exceptional configuration is nearly 1 with smaller run-time. We also show that the weights of the self-loop suggested for multiple marked states in the state-of-the-art works are not optimal for this exceptional configuration of clustered mark states. We propose a range of weights of the self-loop from which only one can give the desired result for this configuration.

quant-ph↗

arXiv2021

Moving Quantum States without SWAP via Intermediate Higher Dimensional Qudits

Quantum algorithms can be realized in the form of a quantum circuit. To map quantum circuit for specific quantum algorithm to quantum hardware, qubit mapping is an imperative technique based on the qubit topology. Due to the neighbourhood constraint of qubit topology, the implementation of quantum algorithm rightly, is essential for moving information around in a quantum computer. Swapping of qubits using SWAP gate moves the quantum state between two qubits and solves the neighbourhood constraint of qubit topology. Though, one needs to decompose the SWAP gate into three CNOT gates to implement SWAP gate efficiently, but unwillingly quantum cost with respect to gate count and depth increases. In this paper, a new formalism of moving quantum states without using SWAP operation is introduced for the first time to the best of our knowledge. Moving quantum states through qubits have been attained with the adoption of temporary intermediate qudit states. This introduction of intermediate qudit states has exhibited a three times reduction in quantum cost with respect to gate count and approximately two times reduction in respect to circuit depth compared to the state-of-the-art approach of SWAP gate insertion. Further, the proposed approach is generalized to any dimensional quantum system.

quant-ph↗

arXiv2021

Circuit Design for $k$-coloring Problem and Its Implementation in Any Dimensional Quantum System

With the evolution of quantum computing, researchers now-a-days tend to incline to find solutions to NP-complete problems by using quantum algorithms in order to gain asymptotic advantage. In this paper, we solve $k$-coloring problem (NP-complete problem) using Grover's algorithm in any dimensional quantum system or any $d$-ary quantum system for the first time to the best of our knowledge, where $d \ge 2$. A newly proposed comparator-based approach helps to generalize the implementation of the $k$-coloring problem in any dimensional quantum system. Till date, $k$-coloring problem has been implemented only in binary and ternary quantum system, hence, we abide to $d=2$ or $d=3$, that is for binary and ternary quantum system for comparing our proposed work with the state-of-the-art techniques. This proposed approach makes the reduction of the qubit cost possible, compared to the state-of-the-art binary quantum systems. Further, with the help of newly proposed ternary comparator, a substantial reduction in quantum gate count for the ternary oracle circuit of the $k$-coloring problem than the previous approaches has been obtained. An end-to-end automated framework has been put forward for implementing the $k$-coloring problem for any undirected and unweighted graph on any available Near-term quantum devices or Noisy Intermediate-Scale Quantum (NISQ) devices or multi-valued quantum simulator, which helps in generalizing our approach.

cs.ET↗

arXiv2020

One-Dimensional Lazy Quantum walk in Ternary System

Quantum walks play an important role for developing quantum algorithms and quantum simulations. Here we present one dimensional three-state quantum walk(lazy quantum walk) and show its equivalence for circuit realization in ternary quantum logic for the first of its kind. Using an appropriate logical mapping of the position space on which a walker evolves onto the multi-qutrit states, we present efficient quantum circuits considering the nearest neighbour position space for the implementation of lazy quantum walks in one-dimensional position space in ternary quantum system. We also address scalability in terms of $n$-qutrit ternary system with example circuits for a three qutrit state space.

quant-ph↗

arXiv2020

Improving the Performance of Deep Learning for Wireless Localization

Indoor localization systems are most commonly based on Received Signal Strength Indicator (RSSI) measurements of either WiFi or Bluetooth-Low-Energy (BLE) beacons. In such systems, the two most common techniques are trilateration and fingerprinting, with the latter providing higher accuracy. In the fingerprinting technique, Deep Learning (DL) algorithms are often used to predict the location of the receiver based on the RSSI measurements of multiple beacons received at the receiver. In this paper, we address two practical issues with applying Deep Learning to wireless localization -- transfer of solution from one wireless environment to another \emph{and} small size of labelled data set. First, we apply automatic hyperparameter optimization to a deep neural network (DNN) system for indoor wireless localization, which makes the system easy to port to new wireless environments. Second, we show how to augment a typically small labelled data set using the unlabelled data set. We observed improved performance in DL by applying the two techniques. Additionally, all relevant code has been made freely available.

cs.NI↗

arXiv2018

Search of clustered marked states with lackadaisical quantum walks

Nature of quantum walk in presence of multiple marked state has been studied by Nahimovs and Rivosh \cite{10.1007/978-3-662-49192-8_31}. They have shown that if the marked states are arranged in a $\sqrt{k} \times \sqrt{k}$ cluster in a $\sqrt{N} \times \sqrt{N}$ grid, then to find a single marked state among the multiple ones, quantum walk requires $Ω(\sqrt{N} - \sqrt{k})$ time. In this paper, we show that using lackadaisical quantum walk with the weight of the self-loop as $\frac{4}{N(k + \lfloor{\frac{\sqrt{k}}{2}}\rfloor)}$, where $k$ is odd, the probability of finding a marked state increases by $\sim 0.2$. Furthermore, we show that instead of applying the quantum walk $\mathcal{O}(k)$ times to find all the marked states, classical search in the vicinity of the marked state found after the first implementation of the quantum walk can find all the marked states in $\mathcal{O}(\sqrt{k})$ time on average.

quant-ph↗

arXiv2018

Tiered Object Storage using Persistent Memory

Most data intensive applications often access only a few fields of the objects they are operating on. Since NVM provides fast, byte-addressable access to durable memory, it is possible to access various fields of an object stored in NVM directly without incurring any serialization and deserialization cost. This paper proposes a novel tiered object storage model that modifies a data structure such that only a chosen subset of fields of the data structure are stored in NVM, while the remaining fields are stored in a cheaper (and a traditional) storage layer such as HDDs/SSDs. We introduce a novel linear-programming based optimization framework for deciding the field placement. Our proof of concept demonstrates that a tiered object storage model improves the execution time of standard operations by up to 50\% by avoiding the cost of serialization/deserialization and by reducing the memory footprint of operations.

cs.DC↗

arXiv2018

On Using Non-Volatile Memory in Apache Lucene

Apache Lucene is a widely popular information retrieval library used to provide search functionality in an extremely wide variety of applications. Naturally, it has to efficiently index and search large number of documents. With non-volatile memory in DIMM form factor (NVDIMM), software now has access to durable, byte-addressable memory with write latency within an order of magnitude of DRAM write latency. In this preliminary article, we present the first reported work on the impact of using NVDIMM on the performance of committing, searching, and near-real time searching in Apache Lucene. We show modest improvements by using NVM but, our empirical study suggests that bigger impact requires redesigning Lucene to access NVM as byte-addressable memory using loads and stores, instead of accessing NVM via the file system.

cs.IR↗

arXiv2012

Recognizing Bangla Grammar using Predictive Parser

We describe a Context Free Grammar (CFG) for Bangla language and hence we propose a Bangla parser based on the grammar. Our approach is very much general to apply in Bangla Sentences and the method is well accepted for parsing a language of a grammar. The proposed parser is a predictive parser and we construct the parse table for recognizing Bangla grammar. Using the parse table we recognize syntactical mistakes of Bangla sentences when there is no entry for a terminal in the parse table. If a natural language can be successfully parsed then grammar checking from this language becomes possible. The proposed scheme is based on Top down parsing method and we have avoided the left recursion of the CFG using the idea of left factoring.

cs.CL↗