arXiv subjects

Amitesh Roy

Publications and source records attributed to Amitesh Roy.

11 recordsLinked to original sources

arXiv2026

Effects of fuel and soot concentrations on the inception and development of contrails

Fundamental questions related to the roles of fuel type, combustion parameters, and turbulence transport interactions in the inception and growth of contrails have remained intractable in remote sensing and in-flight measurements. Consequently, we developed a novel laboratory-scale facility for studying the inception, growth and persistence of contrails for aircraft-relevant conditions. The set of exhaust conditions, generated using an inverted co-flow soot generator at a set of global equivalence ratio for two fuels - ethylene and propane, is supplied to the contrail tunnel which then mixes with an ambient flow emulating long-haul aircraft cruise conditions (\SI{20.8}{kPa} and \SI{190}{K}). Detailed soot characterization using a scanning mobility particle sizer and transmission electron microscopy is coupled with measurements of instantaneous and averaged scattering intensities from the generated contrails. The experimental results are complemented by numerical simulations of the contrail tunnel using solutions of the Favre-averaged Navier-Stokes (FANS) equation and a two-equation model for handling particulate matter, including soot and ice. Results show the first experimental snapshots of a contrail cross section, highlighting the interaction of turbulent mixing and microphysical growth scales involved in ice nucleation across the shear layers. As expected, the average scattering intensities of contrails increase with soot number concentrations and water vapor content. Comparisons between ethylene and propane exhausts indicate that the scattering propensity of contrails is more sensitive to exhaust water vapor content than to soot concentrations. Finally, depolarization measurements are used to show asphericity in ice crystal habits. Thus, our study present a unique window into contrail formation, theoretical modeling and simulation.

physics.flu-dyn↗

arXiv2024

Emergence of order from chaos through a continuous phase transition in a turbulent reactive flow system

As the Reynolds number is increased, a laminar fluid flow becomes turbulent, and the range of time and length scales associated with the flow increases. Yet, in a turbulent reactive flow system, as we increase the Reynolds number, we observe the emergence of a single dominant time scale in the acoustic pressure fluctuations, as indicated by its loss of multifractality. Such emergence of order from chaos is intriguing and has hardly been studied. We perform experiments in a turbulent reactive flow system consisting of flame, acoustic, and hydrodynamic subsystems interacting nonlinearly. We study the evolution of short-time correlated dynamics between the acoustic field and the flame in the spatiotemporal domain of the system. The order parameter, defined as the fraction of the correlated dynamics, increases gradually from zero to one. We find that the susceptibility of the order parameter, correlation length, and correlation time diverge at a critical point between chaos and order. Our results show that the observed emergence of order from chaos is a continuous phase transition. Moreover, we provide experimental evidence that the critical exponents characterizing this transition fall in the universality class of directed percolation. Our study demonstrates how a real-world complex, non-equilibrium turbulent reactive flow system exhibits universal behavior near a critical point.

physics.flu-dyn↗

arXiv2023

Coupled thermoacoustic interactions in hydrogen enriched lean combustion

In this paper, we present a framework to study the synchronization of flow velocity with acoustic pressure and heat-release rate in technically-premixed swirl flames. The framework uses the extended proper orthogonal decomposition to identify regions of the velocity field where velocity and heat release fluctuations are highly correlated. We apply this framework to study coupled interactions associated with period-1 and period-2 type thermoacoustic instability in a technically-premixed, swirl stabilized gas turbine model combustor operated with hydrogen-enriched natural gas. We find the structures in flame surface and heat release rate that are correlated to the dominant coherent structures of the flow field using extended POD. We observe that the correlated structures in the flow velocity, flame surface and heat release rate fields share the same spatial regions during thermoacoustic instability with period-1 oscillations. In the case of period-2 oscillations, the structures from flame surface and heat release rate field are strongly correlated. However, these structures contribute less to the coherent structures of the flow field. Using the temporal coefficients of the dominant POD modes of the flow velocity field, we also observed 1:1 and 2:1 frequency locking behaviour among the time series of acoustic pressure, heat release rate and the temporal coefficients of the first two dominating POD modes of velocity field during the state of period-1 and period-2 oscillations, respectively. These frequency-locked states, which indicate the underlying phase-synchronization states, are then correlated with coherent structures in the flow velocity field.

physics.flu-dyn↗

arXiv2022

Mean-field synchronization model for open-loop, swirl controlled thermoacoustic system

Open-loop control is known to be an effective strategy for controlling self-excited thermoacoustic oscillations in turbulent combustors. In this study, we investigate the suppression of thermoacoustic instability in a lean premixed, laboratory-scale combustor using experiments and analysis. Starting with a self-excited thermoacoustic instability in the combustor, we find that a progressive increase in the swirler rotation rate transitions the system from thermoacoustic instability to the suppressed state through a state of intermittency. To model such transition while also quantifying the underlying synchronization characteristics, we extend the model of Dutta et al. [Phys. Rev. E 99, 032215 (2019)] by introducing a feedback between the ensemble of mean-field phase oscillators and the basis expansion of the acoustic pressure governing equation. The assumption that coupling strength among the oscillators is a linear combination of acoustic and swirler rotation frequency is justified \textit{a posteriori}. The link between the model and experimental results is quantitatively established by implementing an optimization algorithm for model parameter estimation. We show that the model replicates the bifurcation characteristics, time series, probability density function (PDF), and power spectral density (PSD) of the various dynamical states observed during the transition to the suppressed state, to excellent accuracy. Specifically, the model captures the change in the PDF of pressure and heat release rate fluctuations from a bimodal distribution during thermoacoustic instability to a unimodal distribution during suppression. Finally, we discuss the global and local flame dynamics and show that the model qualitatively captures various aspects of spatio-temporal synchronization that underlies the transition.

physics.flu-dyn↗

arXiv2022

Small-scale intermittency of premixed turbulent flames

Premixed turbulent flames, encountered in power generation and propulsion engines, are an archetype of a randomly advected, self-propagating surface. While such a flame is known to exhibit large-scale intermittent flapping, the possible intermittency of its small-scale fluctuations has been largely disregarded. Here, we experimentally reveal the inner intermittency of a premixed turbulent V-flame, while clearly distinguishing this small-scale feature from large-scale outer intermittency. From temporal measurements of the fluctuations of the flame, we find a frequency spectrum that has a power-law subrange with an exponent close to $-2$, which is shown to follow from Kolmogorov phenomenology. Crucially, however, the moments of the temporal increment of the flame position are found to scale anomalously, with exponents that saturate at higher-orders. This signature of small-scale inner intermittency is shown to originate from high-curvature, cusp-like structures on the flame surface, which have significance for modeling the heat release rate and other key properties of premixed turbulent flames.

physics.flu-dyn↗

arXiv2022

Mean-field synchronization model of turbulent thermoacoustic transitions

Thermoacoustic instabilities observed in turbulent combustion systems have disastrous consequences and are notoriously challenging to model, predict and control. Here, we introduce a mean-field model of thermoacoustic transitions, where the nonlinear flame response is modeled as the amplitude weighted response of an ensemble of phase oscillators constrained to collectively evolve at the rhythm of acoustic fluctuations. Starting from the acoustic wave equation coupled with the phase oscillators, we derive the evolution equations for the amplitude and phase and obtain the limit cycle solution. We show that the model captures abrupt and continuous transition to thermoacoustic instability observed in disparate combustors. We obtain quantitative insights into the model by estimating the model parameters from the experimental data using parameter optimisation. Importantly, our approach provides an explanation of spatiotemporal synchronization and pattern-formation underlying the transition to thermoacoustic instability while encapsulating the statistical properties of desynchronization, chimeras, and global phase synchronization. We further show using the model that continuous and abrupt transitions to limit cycle oscillations in turbulent combustors corresponds to synchronization transitions of \textit{second-order} and \textit{first-order}, respectively. The present formulation provides a highly interpretable model of thermoacoustic transitions: changes in empirical bifurcation parameters which lead to limit cycle oscillations amounts to an increase in the coupling strength of the phase oscillators, promoting global phase synchronization. The generality of the model in capturing different types of transitions and states of pattern-formation highlights the possibility of extending the present model to a broad range of fluid-dynamical phenomena beyond thermoacoustics.

physics.flu-dyn↗

arXiv2022

Abrupt transitions in turbulent thermoacoustic systems

Abrupt transitions to the state of thermoacoustic instability (TAI) in gas turbine combustors are a significant challenge plaguing the development of next-generation low-emission aircraft and power generation engines. In this paper, we present the observation of abrupt transition in three disparate turbulent thermoacoustic systems: an annular combustor, a swirl-stabilized combustor, and a preheated bluff-body stabilized combustor. Using a low-order stochastic thermoacoustic model, we show that the reported abrupt transitions occur when an initially stable, supercritical limit cycle becomes unstable, leading to a secondary bifurcation to a large amplitude limit cycle solution. The states of combustion noise and intermittency observed in these turbulent combustors are well captured by the additive stochastic noise in the model. Through amplitude reduction, we analyze the underlying potential functions affecting the stability of the observed dynamical states. Finally, we make use of the Fokker-Planck equation, educing the effect of stochastic fluctuations on subcritical and secondary bifurcation. We conclude that a high enough intensity of stochastic fluctuations which transforms a subcritical bifurcation into an intermittency-facilitated continuous transition may have little effect on the abrupt nature of secondary bifurcation. Our findings imply the high likelihood of abrupt transitions in turbulent combustors possessing higher-order nonlinearities where turbulence intensities are disproportionate to the large amplitude limit cycle solution.

physics.flu-dyn↗

arXiv2021

Dynamics of coupled thermoacoustic oscillators under asymmetric forcing: Experiments and theoretical modeling

Quenching of limit cycle oscillations (LCO), either through mutual coupling or external forcing, has attracted wide attention in several fields of science and engineering. However, the simultaneous utilization of these coupling schemes in quenching of LCO has rarely been studied despite its practical applicability. We study the dynamics of two thermoacoustic oscillators simultaneously subjected to mutual coupling and asymmetric external forcing through experiments and theoretical modeling. We investigate the forced response of both identical and non-identical thermoacoustic oscillators for two different amplitudes of LCO. Under mutual coupling alone, identical thermoacoustic oscillators display the occurrence of partial amplitude death and amplitude death, whereas under forcing alone, asynchronous quenching of LCO is observed at non-resonant conditions. When the oscillators are simultaneously subjected to mutual coupling and asymmetric forcing, we observe a larger parametric region of oscillation quenching than when the two mechanisms are utilized individually. This enhancement in the region of oscillation quenching is due to the complementary effect of amplitude death and asynchronous quenching. However, a forced response of coupled non-identical oscillators shows that the effect of forcing is insignificant on synchronization and quenching of oscillations in the oscillator which is not directly forced. Finally, we qualitatively capture the experimental results using a reduced-order theoretical model of two coupled Rijke tubes which are coupled through dissipative and time-delay coupling and asymmetrically forced. We believe that these findings offer fresh insights into the combined effects of mutual and forced synchronization in a system of coupled nonlinear oscillators.

physics.app-ph↗

arXiv2020

Critical region in the spatiotemporal dynamics of a turbulent thermoacoustic system and smart passive control

We develop a passive control strategy for suppressing thermoacoustic instability in a bluff-body stabilized premixed turbulent combustor. When the equivalence ratio is varied, there is a transition from combustion noise to thermoacoustic instability via intermittency in the combustor. We perform simultaneous acoustic pressure, 2D-PIV, and CH$^*$ chemiluminescence measurements to capture the pressure fluctuations, the velocity field, and the heat release rate (HRR) field during the transition. We measure the spatial distribution of the amplitude of turbulent velocity at the acoustic frequency, time-averaged vorticity, time-averaged HRR, and Rayleigh index and identify various regions of significance. We implement a passive control strategy by targeting these regions with a steady injection of secondary micro-jet of air to optimize the injection location and determine the critical region. Targeting the critical region with secondary air leads to greater than 20 dB suppression of the dominant thermoacoustic mode. We observe that the coherent structure forming from the shear layer following the dump plane gets suppressed, leading to an incoherent spatial distribution of HRR fluctuations. We find that the turbulent velocity amplitude correctly identifies the critical region for optimized passive control during thermoacoustic instability. In contrast, the Rayleigh index identifies the region of the most significant acoustic driving; however, it does not identify the region most sensitive to control. Finally, we extend our analysis by determining the spatial distribution of the Hurst exponent measured from the turbulent velocity field. We show that the Hurst exponent identifies the critical region during thermoacoustic instability and intermittency, unlike the other physical measures.

physics.flu-dyn↗

arXiv2020

Fractal dimension of premixed flames in multifractal turbulence

In turbulent premixed flames, the fractal dimension of flame iso-surface is argued to be $\mathbb{D}=7/3$ for Damköhler's large-scale limit $(Da>>1)$ and $\mathbb{D}=8/3$ for Damköhler's small-scale limit $(Da\sim\mathcal{O}(1))$ based on heuristic scaling arguments. However, such scaling arguments do not consider the effect of the multifractal nature of turbulent kinetic energy dissipation on the flame surface. In this paper, we account for the effects of multifractal dissipation on the fractal dimension of low $Da$ turbulent premixed flames. We derive two corrections to the upper-limit of fractal dimension -- $\mathbb{D}=8/3+3/4(1-D_{1/4})$ and $\mathbb{D}=8/3+2/3(3-D_{1/3})$ -- which correspond to the change in the scalar flux and the total area of flame interface due to fluctuations in the inner cut-off scale arising from the intermittent nature of turbulent dissipation, respectively. We further show that the second correction leads to an explicit dependence of the fractal dimension $(\mathbb{D})$ on the scaling exponent $(ξ)$ of the velocity structure function through the relation: $\mathbb{D}=11/3+ξ$. Thus, we explicitly quantify the effect of the multifractal nature of turbulence upon low $Da$ premixed combustion.

physics.flu-dyn↗

arXiv2020

Flame dynamics during intermittency and secondary bifurcation to longitudinal thermoacoustic instability in a swirl-stabilized annular combustor

In this experimental study on a laboratory-scale turbulent annular combustor with sixteen swirl-stabilized burners, we study the flame-flame and flame-acoustic interactions during different dynamical states associated with the longitudinal mode of the combustor. We simultaneously measure the acoustic pressure and CH* chemiluminescence emission of the flame using a high-speed camera. Upon increasing the equivalence ratio, the combustor undergoes the following sequence of transition: combustion noise (CN) to low amplitude longitudinal thermoacoustic instability (TAI) through the state of intermittency (INT), and from low amplitude to high amplitude longitudinal TAI through a secondary bifurcation. We report the first evidence of secondary bifurcation from low amplitude TAI to high amplitude TAI for a turbulent thermoacoustic system which allows us to test the flame response at two different amplitude of perturbation in a natural setting. We find a significant difference in the dynamics of the flame interactions during the periodic part of intermittency and low and high amplitude TAI. Specifically, during the periodic part of intermittency, the phase difference between the local heat release rate (HRR) measured from various burners show significant phase slips in time. During low amplitude TAI, there are fewer phase slips among the HRR response of the burners, which result in a state of weak synchronization among the flames. During high amplitude TAI, we find that the flames are in perfect synchrony amongst themselves and with the pressure fluctuations. We then quantify the degree of temporal and spatial synchronization between different flames, and flames and pressure fluctuations using the Kuramoto order parameter and the phase-locking value. We show that synchronization theory can be conveniently used to characterize and quantify flame-acoustic interactions in an annular combustor.

physics.flu-dyn↗