arXiv subjects

Amlan Datta

Publications and source records attributed to Amlan Datta.

11 recordsLinked to original sources

arXiv2026

Synthesis of Bulk Superconducting LiNbO$_2$ Crystals through CaH$_2$ Reduction

We have synthesized layered superconducting LiNbO$_2$ crystals through a bulk phase transformation from LiNbO$_3$ single crystals via CaH$_2$ reduction. As the Nb valence is reduced from 5+ to 3+, the material undergoes a structural transformation to the resulting product, LiNbO$_2$, which is accompanied by metallic behavior and a superconducting transition, Tc onset, as high as 14.4 K. Secondary ion mass spectroscopy (SIMS) and X-ray photoelectron spectroscopy (XPS) show that the resulting phase is hole-doped through de-lithiation during the reduction. Magnetization and AC susceptibility measurements from a tunnel diode resonator confirm the bulk nature of superconductivity with a superconducting volume fraction of approximately 77% and an upper critical field approaching 26 T. Our study demonstrates extreme hydride reduction as an effective method to induce phase transformations with non-topotactic pathways and can be used to synthesize bulk materials with exotic properties.

cond-mat.supr-con↗

arXiv2026

Magnetic flux distribution, quasiparticle spectroscopy, and quality factors in Nb films for superconducting qubits

Niobium is a practical material platform for superconducting microwave circuits; however, device-level performance can vary significantly depending on film growth and processing conditions. We compare three epitaxial Nb films grown on $c-$plane sapphire substrates under nominally identical conditions, except for the deposition temperature. To correlate internal quality factors, $Q_{\mathrm {i}}$, with material properties, we combine magneto-optical imaging of magnetic flux distribution with quasiparticle spectroscopy via measurements of the London penetration depth, $\lambda(T)$. In the low-$Q_{\mathrm i}$ film, there is a lesser ability to screen the magnetic field and an irregular temperature variation of $\lambda(T)$, implying the existence of localized in-gap states. High $Q_{\mathrm i}$ films show the opposite trend. We conclude that our measurements provide an efficient method for characterizing and optimizing superconducting films for quantum informatics applications.

cond-mat.supr-con↗

arXiv2026

Quasiparticle spectroscopy in tantalum films with different Ta/sapphire interfaces

One of the crucial aspects of current research in quantum information science is the identification and control of loss mechanisms in superconducting circuits. Although microwave measurements directly quantify device performance, additional techniques that probe quasiparticle excitations in superconducting films are needed to understand the microscopic mechanisms underlying dissipation and decoherence. Here, we present results from quasiparticle spectroscopy of Ta/sapphire films by measuring the Meissner-state magnetic susceptibility using a precision frequency-domain resonator specifically designed for thin films. We find direct evidence for additional low-energy excitations in samples with lower internal quality factors. These excitations are consistent with deep subgap states due to two-level systems, Yu-Shiba-Rusinov states near the gap edge, and perhaps other pair-breaking mechanisms. The developed non-destructive frequency-domain quasiparticle spectroscopy is a valuable addition to the quantum materials toolbox.

cond-mat.supr-con↗

arXiv2026

Magneto-optical study of Nb thin films for superconducting qubits

Among the recognized sources of decoherence in superconducting qubits, the spatial inhomogeneity of the superconducting state and the possible presence of magnetic-flux vortices remain comparatively underexplored. Niobium is commonly used as a structural material in transmon qubits that host Josephson junctions, and excess dissipation anywhere in the transmon can become a bottleneck that limits overall quantum performance. The metal/substrate interfacial layer may simultaneously host pair-breaking loss channels (e.g., two-level systems, TLS) and control thermal transport, thereby affecting dissipation and temperature stability. Here, we use quantitative magneto-optical imaging of the magnetic-flux distribution to characterize the homogeneity of the superconducting state and the critical current density, $j_{c}$, in niobium films fabricated under different sputtering conditions. The imaging reveals distinct flux-penetration regimes, ranging from a nearly ideal Bean critical state to strongly nonuniform thermo-magnetic dendritic avalanches. By fitting the measured magnetic-induction profiles, we extract $j_{c}$ and correlate it with film physical properties and with measured qubit internal quality factors. Our results indicate that the Nb/Si interlayer can be a significant contributor to decoherence and should be considered an important factor that must be optimized.

cond-mat.supr-con↗

arXiv2026

Effect of metal encapsulation on bulk superconducting properties of niobium thin films used in qubits

Niobium metal occupies nearly 100\% of the volume of a typical 2D transmon device. While the aluminum Josephson junction is of utmost importance, maintaining quantum coherence across the entire device means that pair-breaking in Nb leads, capacitive pads, and readout resonators can be a major source of decoherence. The established contributors are surface oxides and hydroxides, as well as absorbed hydrogen and oxygen. Metal encapsulation of freshly grown surfaces with non-oxidizing metals, preferably without breaking the vacuum, is a successful strategy to mitigate these issues. While the positive effects of encapsulation are undeniable, it is important to understand its impact on the macroscopic behavior of niobium films. We present a comprehensive study of the bulk superconducting properties of Nb thin films encapsulated with gold and palladium/gold, and compare them to those of bare Nb films. Magneto-optical imaging, magnetization, resistivity, and London and Campbell penetration depth measurements reveal significant differences in encapsulated samples. Both sputtered, and epitaxial Au-capped films exhibit the highest residual resistivity ratio and superconducting transition temperature, as well as the lowest upper critical field, London penetration depth, and critical current. These results are in good agreement with the microscopic theory of anisotropic normal and superconducting states of Nb. We conclude that pair-breaking in the bulk of niobium films, driven by disorder throughout the film rather than just at the surface, is a significant source of quantum decoherence in transmons. We also conclude that gold capping not only passivates the surface but also affects the properties of the entire film, significantly reducing the scattering rate due to defects likely induced by surface diffusion if the film is not protected immediately after fabrication.

cond-mat.supr-con↗

arXiv2025

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph↗

arXiv2024

Creep-enhanced vortex pinning revealed through nonmonotonic relaxation of the Campbell length

We study the effects of flux creep on the linear AC response of the vortex lattice in single crystals Ca$_3$Ir$_4$Sn$_{13}$ by measuring the Campbell penetration depth, $λ_{\rm \scriptscriptstyle C}(T,H,t)$. Thermal fluctuations release vortices from shallow pinning sites, only for them to become re-trapped by deeper potential wells, causing an initial increase of the effective Labusch parameter, which is proportional to the pinning well curvature. This effect cannot be detected in conventional magnetic relaxation measurements but is revealed by our observation of a nonmonotonic time evolution of $λ_{\rm \scriptscriptstyle C}(T,H,t)$, which directly probes the average curvature of the occupied pinning centers. The time evolution of $λ_{\rm \scriptscriptstyle C}(T,H,t)$ was measured at different temperatures in samples with different densities of pinning centers produced by electron irradiation. The curves can be collapsed together when plotted on a logarithmic time scale $t \to T\ln{(t/t_0)}$ confirming that the time evolution is driven by flux creep. The $λ_{\rm \scriptscriptstyle C}(T,H,t)$ is hysteretic with a noticeable nonmonotonic relaxation in the presence of a vortex density gradient (after zero-field cooling), but is monotonic after field cooling, where the vortex density is uniform. This result quantitatively corroborates the novel picture of vortex creep based on the strong pinning theory.

cond-mat.supr-con↗

arXiv2024

The nontrivial effects of annealing on superconducting properties of Nb single crystals

The effect of annealing on the superconducting properties of niobium single crystals cut from the same master boule was studied by local and global magnetic measurements, as well as scanning tunneling microscopy (STM). The formation of large hydride precipitates was observed in unannealed samples. The variation in structural and magnetic properties was studied after annealing under high vacuum at 800 C, 1400 C, and near the melting point of niobium (2477 C) for a few seconds. The initial samples had a high hydrogen content. Polarized optics and magneto-optical studies show that the formation of large niobium hydride precipitates is suppressed already by 800 C annealing. However, the overall superconducting properties in the annealed samples did not improve after annealing, and in fact, worsened. The superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. Parallel studies were conducted using STM, where the sample was annealed initially at 400 C, measured, annealed again at 1700 C, and measured again. These studies revealed a ``dirty'' superconducting gap with a significant spatial variation of tunneling conductance after annealing at 400 C. The clean gap was recovered after annealing at 1700 C. It is likely that these results are due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Overall, the results indicate that vacuum annealing at least up to 1400 C, while expected to remove a large amount of hydrogen, introduces additional nanosized defects, perhaps hydride precipitates, that act as efficient pair-breaking and pinning centers.

cond-mat.supr-con↗

arXiv2023

Anisotropic multiband superconductivity in 2M-WS$_{2}$ probed by controlled disorder

The intrinsically superconducting Dirac semimetal 2M-WS$_{2}$ is a promising candidate to realize proximity-induced topological superconductivity in its protected surface states. A precise characterization of the bulk superconducting state is essential for understanding the nature of surface superconductivity in the system. Here, we perform a detailed experimental study of the temperature and nonmagnetic disorder dependence of the London penetration depth $\lambda$, the upper critical field $H_{c2}$, and the superconducting transition temperature $T_c$ in 2M-WS$_{2}$. We observe a power-law dependence $\lambda(T) - \lambda(0) \propto T^{3}$ at temperatures below $0.35~T_c$, which is remarkably different from the expected exponential attenuation of a fully gapped isotropic $s$-wave superconductor. We then probe the effect of controlled nonmagnetic disorder induced by 2.5 MeV electron irradiation at various doses and find a significant $T_c$ suppression rate. Together with the observed increase of the slope $dH_{c2}/dT|_{T=T_c}$ with irradiation, our results reveal a strongly anisotropic $s^{++}$ multiband superconducting state that takes the same sign on different Fermi sheets. Our results have direct consequences for the expected proximity-induced superconductivity of the topological surface states.

cond-mat.supr-con↗

arXiv2023

Quasiparticle spectroscopy in technologically-relevant niobium using London penetration depth measurements

London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling, we correlate these different behaviors with known pair-breaking mechanisms and show that such measurements may help distinguish between different pair-breaking mechanisms, such as niobium hydrides and two-level systems (TLS). The conclusions also apply to SRF cavities when tracking the temperature-dependent quality factor and the resonant frequency.

cond-mat.supr-con↗

arXiv2022

Quasiparticle spectroscopy, transport, and magnetic properties of Nb films used in superconducting transmon qubits

Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circuits such as those used in quantum computers. The films show outstanding superconducting transition temperature of $T_{c}=9.35$ K and a fairly clean superconducting gap, along with superfluid density enhanced at intermediate temperatures. These observations are consistent with the recent theory of anisotropic strong-coupling superconductivity in Nb. However, the response to the magnetic field is complicated, exhibiting significantly irreversible behavior and insufficient heat conductance leading to thermo-magnetic instabilities. These may present an issue for further improvement of transmon quantum coherence. Possible mitigation strategies are discussed.

cond-mat.supr-con↗