arXiv subjects

Amna Irshad

Publications and source records attributed to Amna Irshad.

10 recordsLinked to original sources

arXiv2026

Movable Antenna Arrays with Imperfect Channel State Information in Rich Scattering Environments

The growing demand for high spectral efficiency in 6G and beyond has driven research into adaptive antenna architectures capable of exploiting the spatial structure of multipath propagation channels. Conventional base station arrays are deployed with fixed element positions and cannot adapt to the instantaneous spatial structure of the propagation channel. In contrast, movable antenna (MA) systems enable dynamic reconfiguration of antenna positions, allowing the array geometry to track the channel characteristics of the current user set. While prior MA studies have demonstrated significant gains under perfect or statistical channel state information (CSI) assumptions, the interplay between imperfect instantaneous CSI, antenna placement optimization, and precoder design has received limited attention. This paper addresses this gap by proposing a practical end-to-end framework encompassing uplink pilot transmission, MMSE channel estimation under a clustered multipath model, and downlink ZF precoding designed from estimated CSI. Antenna positions are optimized via particle swarm optimization under two objectives: sum-rate maximization and max-min fairness. Simulation results show that MA gains are most pronounced under sparse, near-LoS propagation and diminish as channel richness increases. Furthermore, we reveal a fundamental coupling between array geometry and precoder design: a fairness-oriented antenna geometry encodes spatial fairness information that is only recoverable when evaluated with a compatible power allocation strategy. A mismatched precoder can completely mask the geometric advantage, leading to misleading conclusions about the robustness of antenna placement to the choice of optimization objective. These findings provide practically relevant guidance for the design and evaluation of movable antenna systems under realistic operating conditions.

eess.SP↗

arXiv2026

Movable Antenna Optimization for Multi-User MIMO Systems in Realistic Ray-Traced Propagation Environments

To meet the growing data traffic demand in future wireless systems, novel transmission architectures capable of adapting to complex propagation environments are required. Movable antenna (MA) systems have recently emerged as a promising approach, enabling the physical repositioning of antenna elements to exploit spatial degrees of freedom. However, existing studies largely rely on idealized or simplistic channel models, leaving open the question of whether the performance gains of MA systems persist under realistic propagation conditions. This paper investigates the performance of downlink multi-user MIMO systems with movable antennas using deterministic ray-traced channel models. A simulation framework combining three-dimensional ray tracing and field-response channel modeling is developed, and antenna positions are optimized using particle swarm optimization and genetic algorithms. Simulation results reveal that while simplified distance-based channel models predict large performance disparities between competing array configurations, realistic ray-traced channels significantly compress these differences, indicating that propagation effects dominate over pure array geometry optimization. Nevertheless, movable antenna systems retain strong effectiveness over conventional fixed arrays across different user distributions, array sizes, and multipath conditions, even in geometry-constrained propagation environments.

eess.SP↗

arXiv2026

Performance Evaluation of Movable Antenna Arrays in Wideband Multi-User MIMO Systems

Future wireless networks are expected to support increasingly high data rates and user densities, motivating advanced multi-antenna architectures capable of adapting to dynamic propagation environments. Movable antenna (MA) arrays have recently emerged as an extension of massive MIMO, enabling physical repositioning of antenna elements to better exploit spatial diversity and mitigate inter-user interference. While prior studies report promising gains under idealized assumptions, their performance under realistic wideband multi-user operation remains insufficiently understood. This paper presents a comprehensive evaluation of MA-enabled systems in practical uplink and downlink scenarios. A wideband OFDM system model is developed, and novel closed-form sum-rate expressions are derived for both uplink and downlink under linear and nonlinear processing. Hardware impairments are incorporated via an EVM-based model, from which a distortion-aware UL/DL duality is established and the resulting high-SNR sum rate ceiling is analytically characterized. In addition, the interactions between antenna position optimization, receiver processing, and user loading are examined, and performance is evaluated under both time-division duplexing (TDD) and frequency-division duplexing (FDD). The results show that movable antennas can provide noticeable gains in low-impairment regimes with strong multi-user interference, but these benefits are highly scenario-dependent and diminish under hardware-impairment-limited conditions or in rich-scattering environments. These findings highlight the importance of carefully assessing deployment conditions when considering antenna mobility as an alternative to conventional fixed array configurations.

eess.SP↗

arXiv2026

From Antenna Abundance to Antenna Intelligence in 6G Gigantic MIMO Systems

Current cellular systems achieve high spectral efficiency through Massive MIMO, which leverages an abundance of antennas to create favorable propagation conditions for multiuser spatial multiplexing. Looking towards future networks, the extrapolation of this paradigm leads to systems with many hundreds of antennas per base station, raising concerns regarding hardware complexity, cost, and power consumption. This article suggests more intelligent array designs that reduce the need for excessive antenna numbers. We revisit classical uniform array design principles and explain how their uniform spatial sampling leads to unnecessary redundancies in practical deployment scenarios. By exploiting non-uniform sparse arrays with site-specific antenna placements -- based on either pre-optimized irregular arrays or real-time movable antennas -- we demonstrate how superior multiuser MIMO performance can be achieved with far fewer antennas. These principles are inspired by previous works on wireless localization. We explain and demonstrate numerically how these concepts can be adapted for communications to improve the average sum rate and similar metrics. The results suggest a paradigm shift for future antenna array design, where antenna intelligence replaces sheer antenna count. This opens new opportunities for efficient, adaptable, and sustainable Gigantic MIMO systems.

cs.IT↗

arXiv2025

Optimizing Movable Antennas in Wideband Multi-User MIMO With Hardware Impairments

Movable antennas represent an emerging field in telecommunication research and a potential approach to achieving higher data rates in multiple-input multiple-output (MIMO) communications when the total number of antennas is limited. Most solutions and analyses to date have been limited to \emph{narrowband} setups. This work complements the prior studies by quantifying the benefit of using movable antennas in \emph{wideband} MIMO communication systems. First, we derive a novel uplink wideband system model that also accounts for distortion from transceiver hardware impairments. We then formulate and solve an optimization task to maximize the average sum rate by adjusting the antenna positions using particle swarm optimization. Finally, the performance with movable antennas is compared with fixed uniform arrays and the derived theoretical upper bound. The numerical study concludes that the data rate improvement from movable antennas over other arrays heavily depends on the level of hardware impairments, the richness of the multi-path environments, and the number of subcarriers. The present study provides vital insights into the most suitable use cases for movable antennas in future wideband systems.

cs.IT↗

arXiv2025

Pre-Optimized Irregular Arrays versus Moveable Antennas in Multi-User MIMO Systems

Massive multiple-input multiple-output (MIMO) systems exploit the spatial diversity achieved with an array of many antennas to perform spatial multiplexing of many users. Similar performance can be achieved using fewer antennas if movable antenna (MA) elements are used instead. MA-enabled arrays can dynamically change the antenna locations, mechanically or electrically, to achieve maximum spatial diversity for the current propagation conditions. However, optimizing the antenna locations for each channel realization is computationally excessive, requires channel knowledge for all conceivable locations, and requires rapid antenna movements, thus making real-time implementation cumbersome. To overcome these challenges, we propose a pre-optimized irregular array (PIA) concept, where the antenna locations at the base station are optimized a priori for a given coverage area. The objective is to maximize the average sum rate and we take a particle swarm optimization approach to solve it. Simulation results show that PIA achieves performance comparable to MA-enabled arrays while outperforming traditional uniform arrays. Hence, PIA offers a fixed yet efficient array deployment approach without the complexities associated with MA-enabled arrays.

eess.SP↗

arXiv2024

Optimal Dual-Polarized Planar Arrays for Massive Capacity Over Point-to-Point MIMO Channels

Future wireless networks must provide ever higher data rates. The available bandwidth increases roughly linearly as we increase the carrier frequency, but the range shrinks drastically. This paper explores if we can instead reach massive capacities using spatial multiplexing over multiple-input multiple-output (MIMO) channels. In line-of-sight (LOS) scenarios, therank of the MIMO channel matrix depends on the polarization and antenna arrangement. We optimize the rank and condition number by identifying the optimal antenna spacing in dual-polarized planar antenna arrays with imperfect isolation. The result is sparely spaced antenna arrays that exploit radiative near-field properties. We further optimize the array geometry for minimum aperture length and aperture area, which leads to different configurations. Moreover, we prove analytically that for fixed-sized arrays, the MIMO rank grows quadratically with the carrier frequency in LOS scenarios, if the antennas are appropriately designed. Hence, MIMO technology contributes more to the capacity growth than the bandwidth. The numerical results show that massive data rates, far beyond 1 Tbps, can be reached both over fixed point-to-point links. It is also possible for a large base station to serve a practically-sized mobile device.

eess.SP↗

arXiv2023

Exploiting the Depth and Angular Domains for Massive Near-Field Spatial Multiplexing

In this article, we present our vision for how extremely large aperture arrays (ELAAs), equipped with hundreds or thousands of antennas, can play a major role in future 6G networks by enabling a remarkable increase in data rates through spatial multiplexing of a massive number of data streams to both a single user and many simultaneous users. Specifically, with the quantum leap in the array aperture size, the users will be in the so-called radiative near-field region of the array, where previously negligible physical phenomena dominate the propagation conditions and give the channel matrices more favorable properties. This article presents the foundational properties of communication in the radiative near-field region and then exemplifies how these properties enable two unprecedented spatial multiplexing schemes: depth-domain multiplexing of multiple users and angular multiplexing of data streams to a single user. We also highlight research challenges and open problems that require further investigation.

eess.SP↗

arXiv2023

Optimal Geometries of Dual-Polarized Arrays for Large Point-to-Point MIMO Channels

Traditional point-to-point line-of-sight channels have rank 1, irrespective of the number of antennas and array geometries, due to far-field propagation conditions. By contrast, recent papers in the holographic multiple-input multiple-output (MIMO) literature characterize the maximum channel rank that can be achieved between two continuous array apertures, which is much larger than 1 under near-field propagation conditions. In this paper, we maximize the channel capacity between two dual-polarized uniform rectangular arrays (URAs) with discrete antenna elements for a given propagation distance. In particular, we derive the antenna spacings that lead to an ideal MIMO channel where all singular values are as similar as possible. We utilize this analytic result to find the two array geometries that respectively minimize the aperture area and the aperture length.

cs.IT↗

arXiv2020

A Comprehensive Utility Function for Resource Allocation in Mobile Edge Computing

In mobile edge computing (MEC), one of the important challenges is how much resources of which mobile edge server (MES) should be allocated to which user equipment (UE). The existing resource allocation schemes only consider CPU as the requested resource and assume utility for MESs as either a random variable or dependent on the requested CPU only. This paper presents a novel comprehensive utility function for resource allocation in MEC. The utility function considers the heterogeneous nature of applications that a UE offloads to MES. The proposed utility function considers all important parameters, including CPU, RAM, hard disk space, required time, and distance, to calculate a more realistic utility value for MESs. Moreover, we improve upon some general algorithms, used for resource allocation in MEC and cloud computing, by considering our proposed utility function. We name the improved versions of these resource allocation schemes as comprehensive resource allocation schemes. The UE requests are modeled to represent the amount of resources requested by the UE as well as the time for which the UE has requested these resources. The utility function depends upon the UE requests and the distance between UEs and MES, and serves as a realistic means of comparison between different types of UE requests. Choosing (or selecting) an optimal MES with the optimal amount of resources to be allocated to each UE request is a challenging task. We show that MES resource allocation is sub-optimal if CPU is the only resource considered. By taking into account the other resources, i.e., RAM, disk space, request time, and distance in the utility function, we demonstrate improvement in the resource allocation algorithms in terms of service rate, utility, and MES energy consumption.

cs.NI↗