arXiv subjects

Amr S. Helmy

Publications and source records attributed to Amr S. Helmy.

At least 37 records · Page 2Linked to original sources

arXiv2020

Non-classical Semiconductor Photon Sources Enhancing the Performance of Classical Target Detection Systems

We demonstrate and analyze how deploying non-classical intensity correlations obtained from a monolithic semiconductor quantum photon source can enhance classical target detection systems. This is demonstrated by examining the advantages offered by the utilization of the non-classical correlations in a correlation based target detection protocol. We experimentally demonstrate that under the same condition, the target contrast obtained from the protocol when non-classical correlations are utilized exhibits an improvement of up to 17.79dB over the best classical intensity correlation-based target detection protocol, under 29.69dB channel loss and excess noise 13.40dB stronger than the probe signal. We also assessed how the strong frequency correlations within the non-classical photon pairs can be used to further enhance this protocol.

physics.optics↗

arXiv2020

Target Detection aided by Quantum Temporal Correlations: Theoretical Analysis and Experimental Validation

The detection of objects in the presence of significant background noise is a problem of fundamental interest in sensing. In this work, we theoretically analyze a prototype target detection protocol, the quantum temporal correlation (QTC) detection protocol, which is implemented in this work utilizing spontaneous parametric down-converted photon-pair sources. The QTC detection protocol only requires time-resolved photon-counting detection, which is phase-insensitive and therefore suitable for optical target detection. As a comparison to the QTC detection protocol, we also consider a classical phase-insensitive target detection protocol based on intensity detection that is practical in the optical regime. We formulated the target detection problem as a total probe photon transmission estimation problem and obtain an analytical expression of the receiver operating characteristic (ROC) curves. We carry out experiments using a semiconductor waveguide source, which we developed and previously reported. The experimental results agree very well with the theoretical prediction. In particular, we find that in a high-level environment noise and loss, the QTC detection protocol can achieve performance comparable to that of the classical protocol (that is practical in the optical regime) but with $\simeq 57$ times lower detection time in terms of ROC curve metric. The performance of the QTC detection protocol experiment setup could be further improved with a higher transmission of the reference photon and better detector time uncertainty. Furthermore, the probe photons in the QTC detection protocol are completely indistinguishable from the background noise and therefore useful for covert ranging applications. Finally, our technological platform is highly scalable as well as tunable and thus amenable to large scale integration, which is necessary for practical applications.

physics.optics↗

arXiv2020

Enhancing LIDAR performance metrics using continuous-wave photon-pair sources

In order to enhance LIDAR performance metrics such as target detection sensitivity, noise resilience and ranging accuracy, we exploit the strong temporal correlation within the photon pairs generated in continuous-wave pumped semiconductor waveguides. The enhancement attained through the use of such non-classical sources is measured and compared to a corresponding target detection scheme based on simple photon-counting detection. The performances of both schemes are quantified by the estimation uncertainty and Fisher information of the probe photon transmission, which is a widely adopted sensing figure of merit. The target detection experiments are conducted with high probe channel loss ($\simeq 1-5\times10^{-5}$) and formidable environment noise up to 36 dB stronger than the detected probe power of $1.64\times 10^{-5}$ pW. The experimental result shows significant advantages offered by the enhanced scheme with up to 26.3 dB higher performance in terms of estimation uncertainty, which is equivalent to a reduction of target detection time by a factor of 430 or 146 (21.6 dB) times more resilience to noise. We also experimentally demonstrated ranging with these non-classical photon pairs generated with continuous-wave pump in the presence of strong noise and loss, achieving $\approx$5 cm distance resolution that is limited by the temporal resolution of the detectors.

physics.optics↗

arXiv2019

Ultra-high Purcell factor using long-range modes in asymmetric plasmonic waveguides

For integrated optical devices, realistic utilization of the superior wave-matter interaction offered by plasmonics is typically impeded by optical losses, which increase rapidly with mode volume reduction. Although coupled-mode plasmonic structures has demonstrated effective alleviation of the loss-confinement trade-off, stringent symmetry requirements must be enforced for such reduction to prevail. In this work, we report an asymmetric plasmonic waveguide that is not only capable of guiding subwavelength optical mode with long-range propagation, but is also unrestricted by structural, material, or modal symmetry. In these composite hybrid plasmonic waveguides (CHPWs), the versatility afforded by coupling dissimilar plasmonic structures, within the same waveguide, allow better fabrication tolerance and provide more degrees of design freedom to simultaneously optimize various device attributes. The CHPWs used to demonstrated the concept in this work, exhibit propagation loss and mode area of only 0.03 dB/μm and 0.002 μm^2 respectively, corresponding to the smallest combination amongst experimentally demonstrated long-range plasmonic structures to-date. Moreover, CHPW micro-rings were realized with record in/out coupling excitation efficiency (71%), extinction ratio (29 dB), as well as Purcell factor (1.5\times10^4).

physics.optics↗

arXiv2019

Optimized Preprocessing and Machine Learning for Quantitative Raman Spectroscopy in Biology

Raman spectroscopy's capability to provide meaningful composition predictions is heavily reliant on a pre-processing step to remove insignificant spectral variation. This is crucial in biofluid analysis. Widespread adoption of diagnostics using Raman requires a robust model which can withstand routine spectra discrepancies due to unavoidable variations such as age, diet, and medical background. A wealth of pre-processing methods are available, and it is often up to trial-and-error or user experience to select the method which gives the best results. This process can be incredibly time consuming and inconsistent for multiple operators. In this study we detail a method to analyze the statistical variability within a set of training spectra and determine suitability to form a robust model. This allows us to selectively qualify or exclude a pre-processing method, predetermine robustness, and simultaneously identify the number of components which will form the best predictive model. We demonstrate the ability of this technique to improve predictive models of two artificial biological fluids. Raman spectroscopy is ideal for noninvasive, nondestructive analysis. Routine health monitoring which maximizes comfort is increasingly crucial, particularly in epidemic-level diabetes diagnoses. High variability in spectra of biological samples can hinder Raman's adoption for these methods. Our technique allows the decision of optimal pre-treatment method to be determined for the operator; model performance is no longer a function of user experience. We foresee this statistical technique being an instrumental element to widening the adoption of Raman as a monitoring tool in a field of biofluid analysis.

eess.SP↗

arXiv2018

Dynamically Reconfigurable Sources for Arbitrary Gaussian States in Integrated Photonics Circuits

We present a modular design for integrated programmable multimode sources of arbitrary Gaussian states of light. The technique is based on current technologies, in particular recent demonstrations of on-chip photon manipulation and generation of highly squeezed vacuum states in semiconductors. While the design is generic and independent of the choice of integrated platform, we adopt recent experimental results on compound semiconductors as a demonstrative example. Such a device would be valuable as a source for many quantum protocols that range from imaging to communication and information processing.

quant-ph↗

arXiv2018

Nanoscale Plasmonic Slot Waveguides for Enhanced Raman Spectroscopy

We theoretically investigate several types of plasmonic slot waveguides for enhancing the measured signal in Raman spectroscopy, which is a consequence of electric field and Purcell factor enhancements, as well as an increase in light-matter interaction volume and the Raman signal collection efficiency. An intuitive methodology is presented for calculating the accumulated Raman enhancement factor of an ensemble of molecules in waveguide sensing, which exploits an analytical photon Green function expansion in terms of the waveguide normal modes, and we combine this with a quantum optics formalism of the molecule-waveguide interaction to model Raman scattering. We subsequently show how integrated plasmonic slot waveguides can attain significantly higher Raman enhancement factors: $\sim$5.3$\times$ compared to optofluidic fibers and $\sim$3.7$\times$ compared to planar integrated dielectric waveguides, with a device size and thus analyte volume of at least three-orders of magnitude less. We also provide a comprehensive comparison between the different types of plasmonic slot waveguides based on the important figures-of-merit, and determine the optimal approaches to maximize Raman enhancement.

physics.optics↗

arXiv2018

Performance Enhancement of Nanoscale ${\rm VO}_2$ Modulators Using Hybrid Plasmonics

Vanadium dioxide (${\rm VO}_2$) is a phase change material (PCM) that exhibits a large change in complex refractive index on the order of unity upon switching from its dielectric to its metallic phase. Although this property is key for the design of ultracompact optical modulators of only a few microns in footprint, the high absorption of ${\rm VO}_2$ leads to appreciable insertion loss (IL) that limits the modulator performance. In this paper, through theory and numerical modeling, we report on a new paradigm, which demonstrates how the use of a hybrid plasmonic waveguide to construct a ${\rm VO}_2$ based modulator can improve the performance by minimizing its IL while achieving high extinction ratio (ER) in comparison to a purely dielectric waveguide. The hybrid plasmonic waveguide that contains an additional metal layer with even higher loss than ${\rm VO}_2$ enables unique approaches to engineer the electric field (E-field) intensity distribution within the cross section of the modulator. The resulting figure-of-merit, FoM = ER/IL, is much higher than what is possible by simply incorporating ${\rm VO}_2$ into a silicon wire waveguide. A practical modulator design using this new approach, which also includes input and output couplers yields ER = 3.8 dB/μm and IL = 1.4 dB/μm (FoM = 2.7), with a 3-dB optical bandwidth >500 nm, in a device length = 2 μm, and cross-sectional dimensions = 200 nm $\times$ 450 nm. To the best of our knowledge, this is one of the smallest modulator designs proposed to date that also exhibits amongst the highest ER, FoM, and optical bandwidth, in comparison to existing designs. In addition to ${\rm VO}_2$, we investigate two other PCMs incorporated within the waveguide structure. The improvements obtained for ${\rm VO}_2$ modulators do not extend to other PCMs.

physics.app-ph↗

arXiv2018

Entanglement Enhancement in Multimode Integrated Circuits

The faithful distribution of entanglement in continuous variable systems is essential to many quantum information protocols. As such, entanglement distillation and enhancement schemes are a cornerstone of many applications. The photon subtraction scheme offers enhancement with a relatively simple setup and has been studied in various scenarios. Motivated by recent advances in integrated optics, particularly the ability to build stable multimode interferometers with squeezed input states, a multimodal extension to the enhancement via photon subtraction protocol is studied. States generated with multiple squeezed input states, rather than a single input source, are shown to be more sensitive to the enhancement protocol, leading to increased entanglement at the output. Numerical results show the gain in entanglement is not monotonic with the number of modes or the degree of squeezing in the additional modes. Consequently, the advantage due to having multiple squeezed inputs states can be maximized when the number of modes is still relatively small (e.g., $4$). The requirement for additional squeezing is within the current realm of implementation, making this scheme achievable with present technologies.

quant-ph↗

arXiv2017

Theory of hyperbolic stratified nanostructures for surface enhanced Raman scattering

We theoretically investigate the enhancement of surface enhanced Raman spectroscopy (SERS) using hyperbolic stratified nanostructures and compare to metal nanoresonators. The photon Green function of each nanostructure within its environment is first obtained from a semi-analytical modal theory, which is used in a quantum optics formalism of the molecule-nanostructure interaction to model the SERS spectrum. An intuitive methodology is presented for calculating the single molecule enhancement factor (SMEF), which is also able to predict known experimental SERS enhancement factors of an example gold nano-dimer. We elucidate the important figures-of-merit of the enhancement and explore these for different designs. We find that the use of hyperbolic stratified materials can enhance the photonic local density of states (LDOS) by close to 2 times in comparison to pure metal nanostructures, when both designed to work at the same operating wavelengths. However, the increased LDOS is accompanied by higher electric field concentration within the lossy hyperbolic material, which leads to increased quenching that serves to reduce the overall detected SERS enhancement in the far field. For nanoresonators with resonant localized surface plasmon wavelengths in the near-infrared, the SMEF for the hyperbolic stratified nanostructure is approximately an order of magnitude lower than the pure metal counterpart. Conversely, we show that by detecting the Raman signal using a near-field probe, hyperbolic materials can provide an improvement in SERS enhancement compared to using pure metal nanostructures when the probe is sufficiently close (<50 nm) to the Raman active molecule at the plasmonic hotspot.

physics.optics↗

arXiv2017

Highly Sensitive Wavelength-scale Amorphous Hybrid Plasmonic Detectors

Hybrid integration of plasmonics and Si photonics is a promising architecture for global microprocessor interconnects. To this end, practical plasmonic devices not only should provide athermal, broadband operation over wavelength-scale footprint, but also support non-intrusive integration with low-loss Si waveguides as well as CMOS back-end-of-line processes. Here, we demonstrate a hybrid plasmonic photodetector with a single active junction fabricated via back-end deposited amorphous materials coupled to Si nanowires with only 1.5dB loss. Utilizing internal photoemission, our detectors measured sensitivity of -35dBm in a 620nm by 5μm footprint at 7V bias. Moreover, responsivity up to 0.4mA/W and dark current down to 0.2nA were obtained. The high process tolerance is demonstrated between λ=1.2-1.8μm and up to 100°C. The results suggest the potential towards plasmonic-photonic optoelectronic integration on top of Si chips without costly process modifications.

physics.app-ph↗

arXiv2017

Efficient integrated graphene photonics in the visible and near-IR

Graphene photonics has emerged as a promising platform for providing desirable optical functionality. However, graphene's monolayer-scale thickness fundamentally restricts the available light matter interaction, posing a critical design challenge for integrated devices, particularly in wavelength regimes where graphene plasmonics is untenable. While several plasmonic designs have been proposed to enhance graphene light interaction in these regimes, they suffer from substantial insertion loss due to metal absorption. Here we report a non-resonant metamaterial-based waveguide platform to overcome the design bottleneck associated with graphene device. Such metamaterial structure enables low insertion loss even though metal is being utilized. By examining waveguide dispersion characteristics via closed-form analysis, it is demonstrated that the metamaterial approach can provide optimized optical field that overlaps with the graphene monolayer. This enables graphene-based integrated components with superior optical performance. Specifically, the metamaterial-assisted graphene modulator can provide 5-fold improvement in extinction ratio compared to Si nanowire, while reducing insertion loss by one order magnitude compared to plasmonic structures. Such a waveguide configuration thus allows one to maximize the optical potential that graphene holds in the telecom and visible regimes.

physics.optics↗

arXiv2017

Hyperbolic Metamaterial Nano-Resonators Make Poor Single Photon Sources

We study the optical properties of quantum dipole emitters coupled to hyperbolic metamaterial nano-resonators using a semi-analytical quasinormal mode approach. We show that coupling to metamaterial nano-resonators can lead to significant Purcell enhancements that are nearly an order of magnitude larger than those of plasmonic resonators with comparable geometry. However, the associated single photon output $β$-factors are extremely low (around 10$\%$), far smaller than those of comparable sized metallic resonators (70$\%$). Using a quasinormal mode expansion of the photon Green function, we describe how the low $β$-factors are due to increased Ohmic quenching arising from redshifted resonances, larger quality factors, and stronger confinement of light within the metal. In contrast to current wisdom, these results suggest that hyperbolic metamaterial nano-structures make poor choices for single photon sources.

cond-mat.mes-hall↗

arXiv2016

Dispersion-enabled quantum state control in integrated photonics

Integrated optics has brought unprecedented levels of stability and performance to quantum photonic circuits. However, integrated devices are not merely micron-scale equivalents of their bulk-optics counterparts. By exploiting the inherently dispersive characteristics of the integrated setting, such devices can play a remarkably more versatile role in quantum circuit architectures. We show this by examining the implications of linear dispersion in an ordinary directional coupler. Dispersion unlocks several novel capabilities for this device, including in-situ control over photon spectral and polarization entanglement, tunable photon time-ordering, and entanglement-sensitive two-photon coincidence generation. Also revealed is an ability to maintain perfect two-photon anti-coalescence while tuning the interference visibility, which has no equivalent in bulk-optics. The outcome of this work adds to a suite of state engineering and characterization tools that benefit from the advantages of integration. It also paves the way for re-evaluating the possibilities offered by dispersion in other on-chip devices.

physics.optics↗

arXiv2015

Polarization Engineering in Nano-Scale Waveguides Using Lossless Media

A device that achieves controllable rotation of the state of polarization by rotating the orientation of the eigenmodes of a waveguide by 45$^{\circ}$ is introduced and analyzed. The device can be implemented using lossless materials on a nanoscale and helps circumvent the inherent polarization dependence of photonic devices realized within the silicon on insulator platform. We propose and evaluate two novel polarization rotator-based schemes to achieve polarization engineering functions: (1) A multi-purpose device, with dimensions on the order of a few wavelengths which can function as a polarization splitter or an arbitrary linear polarization state generator. (2) An energy efficient optical modulator that utilizes eigenmode rotation and epsilon near zero (ENZ) effects to achieve high extinction ratio, polarization insensitive amplitude modulation without the need to sweep the device geometry to match the TE and TM mode attributes. By using indium tin oxide (ITO) as an example for a tunable material, the proposed modulator provides polarization insensitive operation and can be realized with a modulation bandwidth of 112 GHz, a length of 1800 nm an energy per bit of 7.5 $fJ$ and an optical bandwidth of 210 nm.

physics.optics↗

arXiv2015

Deterministic separation of arbitrary photon pair states in integrated quantum circuits

Entangled photon pairs generated within integrated devices must often be spatially separated for their subsequent manipulation in quantum circuits. Separation that is both deterministic and universal can in principle be achieved through anti-coalescent two-photon quantum interference. However, such interference-facilitated pair separation (IFPS) has not been extensively studied in the integrated setting, where the strong polarization and wavelength dependencies of integrated couplers -- as opposed to bulk-optics beamsplitters -- can have important implications for performance beyond the identical-photon regime. This paper provides a detailed review of IFPS and examines how these dependencies impact separation fidelity and interference visibility. Focus is given to IFPS mediated by an integrated directional coupler. The analysis applies equally to both on-chip and in-fiber implementations, and can be expanded to other coupler architectures such as multimode interferometers. When coupler dispersion is present, the separation performance can depend on photon bandwidth, spectral entanglement, and the linearity of the dispersion. Under appropriate conditions, reduction in the separation fidelity due to loss of non-classical interference can be perfectly compensated for by classical wavelength demultiplexing effects. This work informs the design as well as the performance assessment of circuits for achieving universal photon pair separation for states with tunable arbitrary properties.

quant-ph↗

arXiv2015

Multilayer black phosphorus as a versatile mid-infrared electro-optic material

We investigate the electro-optic properties of black phosphorus (BP) thin films for optical modulation in the mid-infrared frequencies. Our calculation indicates that an applied out-of-plane electric field may lead to red-, blue-, or bidirectional shift in BP's absorption edge. This is due to the interplay between the field-induced quantum-confined Franz-Keldysh effect and the Pauli-blocked Burstein-Moss shift. The relative contribution of the two electro-absorption mechanisms depends on doping range, operating wavelength, and BP film thickness. For proof-of concept, simple modulator configuration with BP overlaid over a silicon nanowire is studied. Simulation result shows that operating BP in the quantum-confined Franz-Keldysh regime can enable improved maximal attainable absorption as well as power efficiency compared to its graphene counterpart.

cond-mat.mes-hall↗

arXiv2015

Two Polarization Entangled Sources from the Same Semiconductor Chip

Generating nonclassical states of photons such as polarization entangled states on a monolithic chip is a crucial step towards practical applications of optical quantum information processing such as quantum computing and quantum key distribution. Here we demonstrate two polarization entangled photon sources in a single monolithic semiconductor waveguide. The first source is achieved through the concurrent utilization of two spontaneous parametric down-conversion (SPDC) processes, namely type-0 and type-I SPDC processes. The chip can also generate polarization entangled photons via the type-II SPDC process, enabling the generation of both co-polarized and cross-polarized entangled photons in the same device. In both cases, polarization entanglement is generated directly on the chip without the use of any off-chip compensation, interferometry or bandpass filtering. This enables direct, chip-based generation of both Bell states $(|H,H\rangle+|V,V\rangle)/\sqrt{2}$ and $(|H,V\rangle+|V,H\rangle)/\sqrt{2}$ simultaneously utilizing the same pump source. In addition, based on compound semiconductors, this chip can be directly integrated with it own pump laser. This technique ushers an era of self-contained, integrated, electrically pumped, room-temperature polarization entangled photon sources.

quant-ph↗