arXiv subjects

Amrita Basak

Publications and source records attributed to Amrita Basak.

14 recordsLinked to original sources

arXiv2026

Multi-Label Phase Diagram Prediction in Complex Alloys via Physics-Informed Graph Attention Networks

Accurate phase equilibria are foundational to alloy design because they encode the underlying thermodynamics governing stability, transformations, and processing windows. However, while the CALculation of Phase Diagrams (CALPHAD) provides a rigorous thermodynamic framework, exploring multicomponent composition-temperature space remains computationally expensive and is typically limited to sparse section. To enable rapid phase mapping and alloy screening, we propose a physics-informed graph attention network (GAT) that learns element-aware representations and couples them with thermodynamic constraints for multi-label phase-set prediction in the Ag-Bi-Cu-Sn alloy system. Using about 25,000 equilibrium states generated with pycalphad, each composition-temperature point is represented as a four-node element graph with atomic fractions and elemental descriptors as node features. The model combines graph attention, global pooling, and a multilayer perceptron to predict nine relevant phases. To improve physical consistency, we incorporate thermodynamic constraints, applied as training penalties or as an inference-time projection. Across six binary and three ternary subsystems, the baseline model achieves a macro-F1 score of 0.951 and 93.98% exact-set match, while physics-informed decoding improves robustness and raises exact-set accuracy to about 96% on dense in-domain grids. The surrogate also generalizes to an unseen ternary section with 99.32% exact-set accuracy and to a quaternary section at 700 {\deg}C with 91.78% accuracy. These results demonstrate that attention-based graph learning coupled with thermodynamic constraint enforcement provides an effective and physically consistent surrogate for high-resolution phase mapping and extrapolative alloy screening.

cs.LG↗

arXiv2026

Robust Linear Quadratic Optimal Control of Cementitious Material Extrusion

Extrusion-based 3D printing of cementitious materials enables fabrication of complex structures, however it is highly sensitive to disturbances, material property variations, and process uncertainties that decrease flow stability and dimensional fidelity. To address these challenges, this study proposes a robust linear quadratic optimal control framework for regulating material extrusion in cementitious direct ink writing systems. The printer is modeled using two coupled subsystems: an actuation system representing nozzle flow dynamics and a printing system describing the printed strand flow on the build plate. A hybrid control architecture combining sliding mode control for disturbance rejection with linear quadratic optimal feedback for energy-efficient tracking is developed to ensure robustness and optimality. In simulation case studies, the control architecture guarantees acceptable convergence of nozzle and strand flow tracking errors under bounded disturbances.

eess.SY↗

arXiv2026

Real-Time Regulation of Direct Ink Writing Using Model Reference Adaptive Control

Direct Ink Writing (DIW) has gained attention for its potential to reduce printing time and material waste. However, maintaining precise geometry and consistent print quality remains challenging under dynamically varying operating conditions. This paper presents a control-focused approach using a model reference adaptive control (MRAC) strategy based on a reduced-order model (ROM) of extrusion-based 3D printing for a candidate cementitious material system. The proposed controller actively compensates for uncertainties and disturbances by adjusting process parameters in real time, with the objective of minimizing reference-tracking errors. Stability and convergence are rigorously verified via Lyapunov analysis, demonstrating that tracking errors asymptotically approach zero. Performance evaluation under realistic simulation scenarios confirms the effectiveness of the adaptive control framework in maintaining accurate and robust extrusion behavior.

eess.SY↗

arXiv2025

Enhanced geometry prediction in laser directed energy deposition using meta-learning

Accurate bead geometry prediction in laser-directed energy deposition (L-DED) is often hindered by the scarcity and heterogeneity of experimental datasets collected under different materials, machine configurations, and process parameters. To address this challenge, a cross-dataset knowledge transfer model based on meta-learning for predicting deposited track geometry in L-DED is proposed. Specifically, two gradient-based meta-learning algorithms, i.e., Model-Agnostic Meta-Learning (MAML) and Reptile, are investigated to enable rapid adaptation to new deposition conditions with limited data. The proposed framework is performed using multiple experimental datasets compiled from peer-reviewed literature and in-house experiments and evaluated across powder-fed, wire-fed, and hybrid wire-powder L-DED processes. Results show that both MAML and Reptile achieve accurate bead height predictions on unseen target tasks using as few as three to nine training examples, consistently outperforming conventional feedforward neural networks trained under comparable data constraints. Across multiple target tasks representing different printing conditions, the meta-learning models achieve strong generalization performance, with R-squared values reaching up to approximately 0.9 and mean absolute errors between 0.03-0.08 mm, demonstrating effective knowledge transfer across heterogeneous L-DED settings.

cs.LG↗

arXiv2025

Physics-Informed Dynamical Modeling of Extrusion-Based 3D Printing Processes

The trade-off between model fidelity and computational cost remains a central challenge in the computational modeling of extrusion-based 3D printing, particularly for real time optimization and control. Although high fidelity simulations have advanced considerably for offline analysis, dynamical modeling tailored for online, control-oriented applications is still significantly underdeveloped. In this study, we propose a reduced order dynamical flow model that captures the transient behavior of extrusion-based 3D printing. The model is grounded in physics-based principles derived from the Navier Stokes equations and further simplified through spatial averaging and input dependent parameterization. To assess its performance, the model is identified via a nonlinear least squares approach using Computational Fluid Dynamics (CFD) simulation data spanning a range of printing conditions and subsequently validated across multiple combinations of training and testing scenarios. The results demonstrate strong agreement with the CFD data within the nozzle, the nozzle substrate gap, and the deposited layer regions. Overall, the proposed reduced order model successfully captures the dominant flow dynamics of the process while maintaining a level of simplicity compatible with real time control and optimization.

physics.flu-dyn↗

arXiv2025

Real-Time Thermal State Estimation and Forecasting in Laser Powder Bed Fusion

Laser Powder Bed Fusion (L-PBF) is a widely adopted additive manufacturing process for fabricating complex metallic parts layer by layer. Effective thermal management is essential to ensure part quality and structural integrity, as thermal gradients and residual stresses can lead to defects such as warping and cracking. However, existing experimental or computational techniques lack the ability to forecast future temperature distributions in real time, an essential capability for proactive process control. This paper presents a real-time thermal state forecasting framework for L-PBF, based on a physics-informed reduced-order thermal model integrated with a Kalman filtering scheme. The proposed approach efficiently captures inter-layer heat transfer dynamics and enables accurate tracking and forecasting of spatial and temporal temperature evolution. Validation across multiple part geometries using measured data demonstrates that the method reliably estimates and forecasts peak temperatures and cooling trends. By enabling predictive thermal control, this framework offers a practical and computationally efficient solution for thermal management in L-PBF, paving the way toward closed-loop control in L-PBF.

eess.SY↗

arXiv2025

Multiscale Graph Neural Network for Turbulent Flow-Thermal Prediction Around a Complex-Shaped Pin-Fin

This study presents the development of a domain-responsive edge-aware multiscale Graph Neural Network for predicting steady, turbulent flow and thermal behavior in a two-dimensional channel containing arbitrarily shaped complex pin-fin geometries. The training dataset was constructed through an automated framework that integrated geometry generation, meshing, and flow-field solutions in ANSYS Fluent. The pin-fin geometry was parameterized using piecewise cubic splines, producing 1,000 diverse configurations through Latin Hypercube Sampling. Each simulation was converted into a graph structure, where nodes carried a feature vector containing spatial coordinates, a normalized streamwise position, one-hot boundary indicators, and a signed distance to the nearest boundary such as wall. This graph structure served as input to the newly developed Graph Neural Network, which was trained to predict temperature, velocity magnitude, and pressure at each node using data from ANSYS. The network predicted fields with outstanding accuracy, capturing boundary layers, recirculation, and the stagnation region upstream of the pin-fins while reducing wall time by 2-3 orders of magnitude. In conclusion, the novel graph neural network offered a fast and reliable surrogate for simulations in complex flow configurations.

physics.flu-dyn↗

arXiv2024

Elucidating microstructural influences on fatigue behavior for additively manufactured Hastelloy X using Bayesian-calibrated crystal plasticity model

Crystal plasticity (CP) modeling is a vital tool for predicting the mechanical behavior of materials, but its calibration involves numerous (>8) constitutive parameters, often requiring time-consuming trial-and-error methods. This paper proposes a robust calibration approach using Bayesian optimization (BO) to identify optimal CP model parameters under fatigue loading conditions. Utilizing cyclic data from additively manufactured Hastelloy X specimens at 500 degree-F, the BO framework, integrated with a Gaussian process surrogate model, significantly reduces the number of required simulations. A novel objective function is developed to match experimental stress-strain data across different strain amplitudes. Results demonstrate that effective CP model calibration is achieved within 75 iterations, with as few as 50 initial simulations. Sensitivity analysis reveals the influence of CP parameters at various loading points on the stress-strain curve. The results show that the stress-strain response is predominantly controlled by parameters related to yield, with increased influence from backstress parameters during compressive loading. In addition, the effect of introducing twins into the synthetic microstructure on fatigue behavior is studied, and a relationship between microstructural features and the fatigue indicator parameter is established. Results show that larger diameter grains, which exhibit a higher Schmid factor and an average misorientation of approximately 42 degrees +/- 1.67 degree, are identified as probable sites for failure. The proposed optimization framework can be applied to any material system or CP model, streamlining the calibration process and improving the predictive accuracy of such models.

cs.CE↗

arXiv2024

Temperature Distribution Prediction in Laser Powder Bed Fusion using Transferable and Scalable Graph Neural Networks

This study presents novel predictive models using Graph Neural Networks (GNNs) for simulating thermal dynamics in Laser Powder Bed Fusion (L-PBF) processes. By developing and validating Single-Laser GNN (SL-GNN) and Multi-Laser GNN (ML-GNN) surrogates, the research introduces a scalable data-driven approach that learns fundamental physics from small-scale Finite Element Analysis (FEA) simulations and applies them to larger domains. Achieving a Mean Absolute Percentage Error (MAPE) of 3.77% with the baseline SL-GNN model, GNNs effectively learn from high-resolution simulations and generalize well across larger geometries. The proposed models capture the complexity of the heat transfer process in L-PBF while significantly reducing computational costs. For example, a thermomechanical simulation for a 2 mm x 2 mm domain typically requires about 4 hours, whereas the SL-GNN model can predict thermal distributions almost instantly. Calibrating models to larger domains enhances predictive performance, with significant drops in MAPE for 3 mm x 3 mm and 4 mm x 4 mm domains, highlighting the scalability and efficiency of this approach. Additionally, models show a decreasing trend in Root Mean Square Error (RMSE) when tuned to larger domains, suggesting potential for becoming geometry-agnostic. The interaction of multiple lasers complicates heat transfer, necessitating larger model architectures and advanced feature engineering. Using hyperparameters from Gaussian process-based Bayesian optimization, the best ML-GNN model demonstrates a 46.4% improvement in MAPE over the baseline ML-GNN model. In summary, this approach enables more efficient and flexible predictive modeling in L-PBF additive manufacturing.

cs.LG↗

arXiv2024

Identifying fatigue crack initiation through analytical calculation of temporal compliance calibrated with Computed Tomography

Fatigue failure is ubiquitous in engineering applications. While the total fatigue life is critical to understanding a component's operational life, for safety, regulatory compliance, and predictive maintenance, the characterization of initiation life is important. Traditionally, initiation life is characterized by potential drop method, acoustic emission technique, and strain-based measurements. However, the primary challenge with these methods lies in the necessity of calibration for each new material system. The difficulties become even more aggravated for additively manufactured components, where fatigue properties are reported to vary widely in the open literature. In this work, an analytical methodology is utilized to evaluate the initiation life of two different materials such as AlSi10Mg and SS316L, fabricated via laser-powder bed fusion (L-PBF) technique. The processing parameters are selected such that AlSi10Mg behaves like a brittle material while SS316L shows ductile behavior. A custom fatigue testing apparatus is used inside Computed Tomography (CT) for evaluating fatigue initiation. The apparatus reports load-displacement data, which is post-processed using an analytical approach to calculate the evolution of material compliance. The results indicate that crack initiation during fatigue loading is marked by a noticeable change in compliance. The analytical technique shows a maximum difference of 4.8% in predicting initiation life compared to CT imaging. These findings suggest that compliance monitoring can effectively identify fatigue initiation in various materials.

cond-mat.mtrl-sci↗

arXiv2024

Surface roughness-informed fatigue life prediction of L-PBF Hastelloy X at elevated temperature

Additive manufacturing, especially laser powder bed fusion (L-PBF), is widely used for fabricating metal parts with intricate geometries. However, parts produced via L-PBF suffer from varied surface roughness which affects the dynamic or fatigue properties. Accurate prediction of fatigue properties as a function of surface roughness is a critical requirement for qualifying L-PBF parts. In this work, an analytical methodology is put forth to predict the fatigue life of L-PBF components having heterogeneous surface roughness. Thirty-six Hastelloy X specimens are printed using L-PBF followed by industry-standard heat treatment procedures. Half of these specimens are built with as-printed gauge sections and the other half is printed as cylinders from which fatigue specimens are extracted via machining. Specimens are printed in a vertical orientation and an orientation 30 degree from the vertical axis. The surface roughness of the specimens is measured using computed tomography and parameters such as the maximum valley depth are used to build an extreme value distribution. Fatigue testing is conducted at an isothermal condition of 500-degree F. It is observed that the rough specimens fail much earlier compared to the machined specimens due to the deep valleys present on the surfaces of the former ones. The valleys act as notches leading to high strain localization. Following this observation, a functional relationship is formulated analytically that considers surface valleys as notches and correlates the strain localization around those notches with fatigue life, using the Coffin-Manson-Basquin and Ramberg-Osgood equation. In conclusion, the proposed analytical model successfully predicts the fatigue life of L-PBF specimens at an elevated temperature undergoing different strain loadings.

physics.app-ph↗

arXiv2024

Multi-fidelity surrogate with heterogeneous input spaces for modeling melt pools in laser-directed energy deposition

Multi-fidelity (MF) modeling is a powerful statistical approach that can intelligently blend data from varied fidelity sources. This approach finds a compelling application in predicting melt pool geometry for laser-directed energy deposition (L-DED). One major challenge in using MF surrogates to merge a hierarchy of melt pool models is the variability in input spaces. To address this challenge, this paper introduces a novel approach for constructing an MF surrogate for predicting melt pool geometry by integrating models of varying complexity, that operate on heterogeneous input spaces. The first thermal model incorporates five input parameters i.e., laser power, scan velocity, powder flow rate, carrier gas flow rate, and nozzle height. In contrast, the second thermal model can only handle laser power and scan velocity. A mapping is established between the heterogeneous input spaces so that the five-dimensional space can be morphed into a pseudo two-dimensional space. Predictions are then blended using a Gaussian process-based co-kriging method. The resulting heterogeneous multi-fidelity Gaussian process (Het-MFGP) surrogate not only improves predictive accuracy but also offers computational efficiency by reducing evaluations required from the high-dimensional, high-fidelity thermal model. The results underscore the benefits of employing Het-MFGP for modeling melt pool behavior in L-DED. The framework successfully demonstrates how to leverage multimodal data and handle scenarios where certain input parameters may be difficult to model or measure.

cs.LG↗

arXiv2023

A Fully-Automated Framework Integrating Gaussian Process Regression and Bayesian Optimization to Design Pin-Fins

Pin fins are imperative in the cooling of turbine blades. The designs of pin fins, therefore, have seen significant research in the past. With the developments in metal additive manufacturing, novel design approaches toward complex geometries are now feasible. To that end, this article presents a Bayesian optimization approach for designing inline pins that can achieve low pressure loss. The pin-fin shape is defined using featurized (parametrized) piecewise cubic splines in 2D. The complexity of the shape is dependent on the number of splines used for the analysis. From a method development perspective, the study is performed using three splines. Owing to this piece-wise modeling, a unique pin fin design is defined using five features. After specifying the design, a computational fluid dynamics-based model is developed that computes the pressure drop during the flow. Bayesian optimization is carried out on a Gaussian processes-based surrogate to obtain an optimal combination of pin-fin features to minimize the pressure drop. The results show that the optimization tends to approach an aerodynamic design leading to low pressure drop corroborating with the existing knowledge. Furthermore, multiple iterations of optimizations are conducted with varying degree of input data. The results reveal that a convergence to similar optimal design is achieved with a minimum of just twenty five initial design-of-experiments data points for the surrogate. Sensitivity analysis shows that the distance between the rows of the pin fins is the most dominant feature influencing the pressure drop. In summary, the newly developed automated framework demonstrates remarkable capabilities in designing pin fins with superior performance characteristics.

physics.flu-dyn↗

arXiv2022

A Reinforcement Learning Approach for Process Parameter Optimization in Additive Manufacturing

Process optimization for metal additive manufacturing (AM) is crucial to ensure repeatability, control microstructure, and minimize defects. Despite efforts to address this via the traditional design of experiments and statistical process mapping, there is limited insight on an on-the-fly optimization framework that can be integrated into a metal AM system. Additionally, most of these methods, being data-intensive, cannot be supported by a metal AM alloy or system due to budget restrictions. To tackle this issue, the article introduces a Reinforcement Learning (RL) methodology transformed into an optimization problem in the realm of metal AM. An off-policy RL framework based on Q-learning is proposed to find optimal laser power ($P$) - scan velocity ($v$) combinations with the objective of maintaining steady-state melt pool depth. For this, an experimentally validated Eagar-Tsai formulation is used to emulate the Laser-Directed Energy Deposition environment, where the laser operates as the agent across the $P-v$ space such that it maximizes rewards for a melt pool depth closer to the optimum. The culmination of the training process yields a Q-table where the state ($P,v$) with the highest Q-value corresponds to the optimized process parameter. The resultant melt pool depths and the mapping of Q-values to the $P-v$ space show congruence with experimental observations. The framework, therefore, provides a model-free approach to learning without any prior.

cs.LG↗