arXiv subjects

Ana C. Murillo

Publications and source records attributed to Ana C. Murillo.

At least 19 recordsLinked to original sources

arXiv2026

Comparative Assessment of Deep Learning Architectures for Underwater Subsurface Kelp Forest Segmentation with The Kelp-o-Tron

Submerged kelp forests are vital coastal ecosystems that support marine biodiversity and ecosystem dynamics, yet accurate underwater kelp segmentation remains challenging due to optical degradation, illumination variability, turbidity, overlapping vegetation, and complex benthic backgrounds. We systematically evaluated three deep learning semantic segmentation frameworks, ResNet34-U-Net, ResNet50-DeepLabV3, and a hybrid ResNet50-ASPP-Transformer architecture, for kelp detection using high-resolution underwater RGB imagery collected from northeastern U.S. coastal waters. A dataset of 3,395 SSeg assisted annotated image-mask pairs was developed for model training and validation, while geographically independent sites were used for quantitative and qualitative evaluation. All models used consistent preprocessing, augmentation, and evaluation protocols. On independent test data, ResNet50-DeepLabV3 achieved the highest Dice (0.7120) and Intersection over Union (IoU; 0.6267), followed by ResNet34 U Net (Dice 0.6868; IoU 0.5978). The hybrid ASPP Transformer achieved the highest pixel accuracy (0.8528) but lower Dice (0.6437) and IoU (0.5746). External qualitative evaluation further showed that DeepLabV3 produced more consistent segmentation across varying environmental conditions, image qualities, and benthic habitats. Overall, ResNet50-DeepLabV3, termed Kelp-O-Tron, provided the best balance of segmentation accuracy, robustness, and generalization. The dataset, annotation workflow, and comparative evaluation provide resources for advancing automated underwater habitat mapping and ecological monitoring.

cs.CV↗

arXiv2026

Leveraging existing sparse point annotations for benthic imagery dense segmentation

The health of marine ecosystems is a critical indicator of global environmental change, yet the physical constraints of underwater observation and the intrinsic challenges of processing marine imagery severely limit the scalability of systematic monitoring. While recent visual foundation models such as the Segment Anything Model (SAM) series show great promise, they still struggle with the fine-grained recognition required in these complex scenarios and still require expert supervision. Our work addresses this gap by bridging state-of-the-art foundation models with existing sparse supervision. Because historical benthic surveys are typically annotated with only a few sparse expert points per image, we utilize these legacy point-labels as visual prompts for SAM2. Our primary contribution is a novel mechanism to automatically identify which of these points are suitable, and which are actively harmful, when used for propagation. By filtering out unreliable points, we extract high-quality pseudo-ground-truth masks capable of training more accurate, fine-grained semantic segmentation models. We demonstrate the effectiveness of our approach on public benthic data and introduce a new, challenging benchmark featuring real-world sparse expert annotations, paving the way for scalable ecological analysis.

cs.CV↗

arXiv2026

SSeg: Active Sparse Point-Label Augmentation for Semantic Segmentation

Semantic segmentation is essential for automating remote sensing analysis in fields like ecology. However, fine-grained analysis of complex aerial or underwater imagery remains an open challenge, even for state-of-the-art models. Progress is frequently hindered by the high cost of obtaining the dense, expert-annotated labels required for model supervision. While sparse point-labels are easier to obtain, they introduce challenges regarding which points to annotate and how to propagate the sparse information. We present SSeg, a novel framework that addresses both issues. SSeg first employs an active sampling strategy to guide annotators, maximizing the value of their point labels. Then, it propagates these sparse labels with a hybrid approach leveraging both the best of SAM2 and superpixel-based methods. Experiments on two diverse monitoring datasets demonstrate SSeg's benefits over state-of-the-art approaches. Our main contribution is a simple but effective interactive annotation tool integrating our algorithms. It enables ecology researchers to leverage foundation models and computer vision to efficiently generate high-quality segmentation masks to process their data.

cs.CV↗

arXiv2026

SuperPoint-E: local features for 3D reconstruction via tracking adaptation in endoscopy

In this work, we focus on boosting the feature extraction to improve the performance of Structure-from-Motion (SfM) in endoscopy videos. We present SuperPoint-E, a new local feature extraction method that, using our proposed Tracking Adaptation supervision strategy, significantly improves the quality of feature detection and description in endoscopy. Extensive experimentation on real endoscopy recordings studies our approach's most suitable configuration and evaluates SuperPoint-E feature quality. The comparison with other baselines also shows that our 3D reconstructions are denser and cover more and longer video segments because our detector fires more densely and our features are more likely to survive (i.e. higher detection precision). In addition, our descriptor is more discriminative, making the guided matching step almost redundant. The presented approach brings significant improvements in the 3D reconstructions obtained, via SfM on endoscopy videos, compared to the original SuperPoint and the gold standard SfM COLMAP pipeline.

cs.CV↗

arXiv2026

FALCONEye: Finding Answers and Localizing Content in ONE-hour-long videos with multi-modal LLMs

Finding information in hour-long videos is a challenging task even for top-performing Vision Language Models (VLMs), as encoding visual content quickly exceeds available context windows. To tackle this challenge, we present FALCONEye, a novel video agent based on a training-free, model-agnostic meta-architecture composed of a VLM and a Large Language Model (LLM). FALCONEye answers open-ended questions using an exploration-based search algorithm guided by calibrated confidence from the VLM's answers. We also introduce the FALCON-Bench benchmark, extending Question Answering problem to Video Answer Search-requiring models to return both the answer and its supporting temporal window for open-ended questions in hour-long videos. With just a 7B VLM and a lightweight LLM, FALCONEye outscores all open-source 7B VLMs and comparable agents in FALCON-Bench. It further demonstrates its generalization capability in MLVU benchmark with shorter videos and different tasks, surpassing GPT-4o on single-detail tasks while slashing inference cost by roughly an order of magnitude.

cs.CV↗

arXiv2025

Online Topological Localization for Navigation Assistance in Bronchoscopy

Video bronchoscopy is a fundamental procedure in respiratory medicine, where medical experts navigate through the bronchial tree of a patient to diagnose or operate the patient. Surgeons need to determine the position of the scope as they go through the airway until they reach the area of interest. This task is very challenging for practitioners due to the complex bronchial tree structure and varying doctor experience and training. Navigation assistance to locate the bronchoscope during the procedure can improve its outcome. Currently used techniques for navigational guidance commonly rely on previous CT scans of the patient to obtain a 3D model of the airway, followed by tracking of the scope with additional sensors or image registration. These methods obtain accurate locations but imply additional setup, scans and training. Accurate metric localization is not always required, and a topological localization with regard to a generic airway model can often suffice to assist the surgeon with navigation. We present an image-based bronchoscopy topological localization pipeline to provide navigation assistance during the procedure, with no need of patient CT scan. Our approach is trained only on phantom data, eliminating the high cost of real data labeling, and presents good generalization capabilities. The results obtained surpass existing methods, particularly on real data test sequences.

cs.CV↗

arXiv2025

Sim2Real in endoscopy segmentation with a novel structure aware image translation

Automatic segmentation of anatomical landmarks in endoscopic images can provide assistance to doctors and surgeons for diagnosis, treatments or medical training. However, obtaining the annotations required to train commonly used supervised learning methods is a tedious and difficult task, in particular for real images. While ground truth annotations are easier to obtain for synthetic data, models trained on such data often do not generalize well to real data. Generative approaches can add realistic texture to it, but face difficulties to maintain the structure of the original scene. The main contribution in this work is a novel image translation model that adds realistic texture to simulated endoscopic images while keeping the key scene layout information. Our approach produces realistic images in different endoscopy scenarios. We demonstrate these images can effectively be used to successfully train a model for a challenging end task without any real labeled data. In particular, we demonstrate our approach for the task of fold segmentation in colonoscopy images. Folds are key anatomical landmarks that can occlude parts of the colon mucosa and possible polyps. Our approach generates realistic images maintaining the shape and location of the original folds, after the image-style-translation, better than existing methods. We run experiments both on a novel simulated dataset for fold segmentation, and real data from the EndoMapper (EM) dataset. All our new generated data and new EM metadata is being released to facilitate further research, as no public benchmark is currently available for the task of fold segmentation.

cs.CV↗

arXiv2025

Gen-Swarms: Adapting Deep Generative Models to Swarms of Drones

Gen-Swarms is an innovative method that leverages and combines the capabilities of deep generative models with reactive navigation algorithms to automate the creation of drone shows. Advancements in deep generative models, particularly diffusion models, have demonstrated remarkable effectiveness in generating high-quality 2D images. Building on this success, various works have extended diffusion models to 3D point cloud generation. In contrast, alternative generative models such as flow matching have been proposed, offering a simple and intuitive transition from noise to meaningful outputs. However, the application of flow matching models to 3D point cloud generation remains largely unexplored. Gen-Swarms adapts these models to automatically generate drone shows. Existing 3D point cloud generative models create point trajectories which are impractical for drone swarms. In contrast, our method not only generates accurate 3D shapes but also guides the swarm motion, producing smooth trajectories and accounting for potential collisions through a reactive navigation algorithm incorporated into the sampling process. For example, when given a text category like Airplane, Gen-Swarms can rapidly and continuously generate numerous variations of 3D airplane shapes. Our experiments demonstrate that this approach is particularly well-suited for drone shows, providing feasible trajectories, creating representative final shapes, and significantly enhancing the overall performance of drone show generation.

cs.RO↗

arXiv2024

CARLOR @ Ego4D Step Grounding Challenge: Bayesian temporal-order priors for test time refinement

The goal of the Step Grounding task is to locate temporal boundaries of activities based on natural language descriptions. This technical report introduces a Bayesian-VSLNet to address the challenge of identifying such temporal segments in lengthy, untrimmed egocentric videos. Our model significantly improves upon traditional models by incorporating a novel Bayesian temporal-order prior during inference, enhancing the accuracy of moment predictions. This prior adjusts for cyclic and repetitive actions within videos. Our evaluations demonstrate superior performance over existing methods, achieving state-of-the-art results on the Ego4D Goal-Step dataset with a 35.18 Recall Top-1 at 0.3 IoU and 20.48 Recall Top-1 at 0.5 IoU on the test set.

cs.CV↗

arXiv2024

EventSleep: Sleep Activity Recognition with Event Cameras

Event cameras are a promising technology for activity recognition in dark environments due to their unique properties. However, real event camera datasets under low-lighting conditions are still scarce, which also limits the number of approaches to solve these kind of problems, hindering the potential of this technology in many applications. We present EventSleep, a new dataset and methodology to address this gap and study the suitability of event cameras for a very relevant medical application: sleep monitoring for sleep disorders analysis. The dataset contains synchronized event and infrared recordings emulating common movements that happen during the sleep, resulting in a new challenging and unique dataset for activity recognition in dark environments. Our novel pipeline is able to achieve high accuracy under these challenging conditions and incorporates a Bayesian approach (Laplace ensembles) to increase the robustness in the predictions, which is fundamental for medical applications. Our work is the first application of Bayesian neural networks for event cameras, the first use of Laplace ensembles in a realistic problem, and also demonstrates for the first time the potential of event cameras in a new application domain: to enhance current sleep evaluation procedures. Our activity recognition results highlight the potential of event cameras under dark conditions, and its capacity and robustness for sleep activity recognition, and open problems as the adaptation of event data pre-processing techniques to dark environments.

cs.CV↗

arXiv2024

Active Exploration in Bayesian Model-based Reinforcement Learning for Robot Manipulation

Efficiently tackling multiple tasks within complex environment, such as those found in robot manipulation, remains an ongoing challenge in robotics and an opportunity for data-driven solutions, such as reinforcement learning (RL). Model-based RL, by building a dynamic model of the robot, enables data reuse and transfer learning between tasks with the same robot and similar environment. Furthermore, data gathering in robotics is expensive and we must rely on data efficient approaches such as model-based RL, where policy learning is mostly conducted on cheaper simulations based on the learned model. Therefore, the quality of the model is fundamental for the performance of the posterior tasks. In this work, we focus on improving the quality of the model and maintaining the data efficiency by performing active learning of the dynamic model during a preliminary exploration phase based on maximize information gathering. We employ Bayesian neural network models to represent, in a probabilistic way, both the belief and information encoded in the dynamic model during exploration. With our presented strategies we manage to actively estimate the novelty of each transition, using this as the exploration reward. In this work, we compare several Bayesian inference methods for neural networks, some of which have never been used in a robotics context, and evaluate them in a realistic robot manipulation setup. Our experiments show the advantages of our Bayesian model-based RL approach, with similar quality in the results than relevant alternatives with much lower requirements regarding robot execution steps. Unlike related previous studies that focused the validation solely on toy problems, our research takes a step towards more realistic setups, tackling robotic arm end-tasks.

cs.RO↗

arXiv2024

SpectralWaste Dataset: Multimodal Data for Waste Sorting Automation

The increase in non-biodegradable waste is a worldwide concern. Recycling facilities play a crucial role, but their automation is hindered by the complex characteristics of waste recycling lines like clutter or object deformation. In addition, the lack of publicly available labeled data for these environments makes developing robust perception systems challenging. Our work explores the benefits of multimodal perception for object segmentation in real waste management scenarios. First, we present SpectralWaste, the first dataset collected from an operational plastic waste sorting facility that provides synchronized hyperspectral and conventional RGB images. This dataset contains labels for several categories of objects that commonly appear in sorting plants and need to be detected and separated from the main trash flow for several reasons, such as security in the management line or reuse. Additionally, we propose a pipeline employing different object segmentation architectures and evaluate the alternatives on our dataset, conducting an extensive analysis for both multimodal and unimodal alternatives. Our evaluation pays special attention to efficiency and suitability for real-time processing and demonstrates how HSI can bring a boost to RGB-only perception in these realistic industrial settings without much computational overhead.

cs.CV↗

arXiv2024

CLIPSwarm: Generating Drone Shows from Text Prompts with Vision-Language Models

This paper introduces CLIPSwarm, a new algorithm designed to automate the modeling of swarm drone formations based on natural language. The algorithm begins by enriching a provided word, to compose a text prompt that serves as input to an iterative approach to find the formation that best matches the provided word. The algorithm iteratively refines formations of robots to align with the textual description, employing different steps for "exploration" and "exploitation". Our framework is currently evaluated on simple formation targets, limited to contour shapes. A formation is visually represented through alpha-shape contours and the most representative color is automatically found for the input word. To measure the similarity between the description and the visual representation of the formation, we use CLIP [1], encoding text and images into vectors and assessing their similarity. Subsequently, the algorithm rearranges the formation to visually represent the word more effectively, within the given constraints of available drones. Control actions are then assigned to the drones, ensuring robotic behavior and collision-free movement. Experimental results demonstrate the system's efficacy in accurately modeling robot formations from natural language descriptions. The algorithm's versatility is showcased through the execution of drone shows in photorealistic simulation with varying shapes. We refer the reader to the supplementary video for a visual reference of the results.

cs.RO↗

arXiv2024

CineMPC: A Fully Autonomous Drone Cinematography System Incorporating Zoom, Focus, Pose, and Scene Composition

We present CineMPC, a complete cinematographic system that autonomously controls a drone to film multiple targets recording user-specified aesthetic objectives. Existing solutions in autonomous cinematography control only the camera extrinsics, namely its position, and orientation. In contrast, CineMPC is the first solution that includes the camera intrinsic parameters in the control loop, which are essential tools for controlling cinematographic effects like focus, depth-of-field, and zoom. The system estimates the relative poses between the targets and the camera from an RGB-D image and optimizes a trajectory for the extrinsic and intrinsic camera parameters to film the artistic and technical requirements specified by the user. The drone and the camera are controlled in a nonlinear Model Predicted Control (MPC) loop by re-optimizing the trajectory at each time step in response to current conditions in the scene. The perception system of CineMPC can track the targets' position and orientation despite the camera effects. Experiments in a photorealistic simulation and with a real platform demonstrate the capabilities of the system to achieve a full array of cinematographic effects that are not possible without the control of the intrinsics of the camera. Code for CineMPC is implemented following a modular architecture in ROS and released to the community.

cs.RO↗

arXiv2023

CLIPSwarm: Converting text into formations of robots

We present CLIPSwarm, an algorithm to generate robot swarm formations from natural language descriptions. CLIPSwarm receives an input text and finds the position of the robots to form a shape that corresponds to the given text. To do so, we implement a variation of the Montecarlo particle filter to obtain a matching formation iteratively. In every iteration, we generate a set of new formations and evaluate their Clip Similarity with the given text, selecting the best formations according to this metric. This metric is obtained using Clip, [1], an existing foundation model trained to encode images and texts into vectors within a common latent space. The comparison between these vectors determines how likely the given text describes the shapes. Our initial proof of concept shows the potential of this solution to generate robot swarm formations just from natural language descriptions and demonstrates a novel application of foundation models, such as CLIP, in the field of multi-robot systems. In this first approach, we create formations using a Convex-Hull approach. Next steps include more robust and generic representation and optimization steps in the process of obtaining a suitable swarm formation.

cs.RO↗

arXiv2023

CineTransfer: Controlling a Robot to Imitate Cinematographic Style from a Single Example

This work presents CineTransfer, an algorithmic framework that drives a robot to record a video sequence that mimics the cinematographic style of an input video. We propose features that abstract the aesthetic style of the input video, so the robot can transfer this style to a scene with visual details that are significantly different from the input video. The framework builds upon CineMPC, a tool that allows users to control cinematographic features, like subjects' position on the image and the depth of field, by manipulating the intrinsics and extrinsics of a cinematographic camera. However, CineMPC requires a human expert to specify the desired style of the shot (composition, camera motion, zoom, focus, etc). CineTransfer bridges this gap, aiming a fully autonomous cinematographic platform. The user chooses a single input video as a style guide. CineTransfer extracts and optimizes two important style features, the composition of the subject in the image and the scene depth of field, and provides instructions for CineMPC to control the robot to record an output sequence that matches these features as closely as possible. In contrast with other style transfer methods, our approach is a lightweight and portable framework which does not require deep network training or extensive datasets. Experiments with real and simulated videos demonstrate the system's ability to analyze and transfer style between recordings, and are available in the supplementary video.

cs.RO↗

arXiv2023

Event Transformer+. A multi-purpose solution for efficient event data processing

Event cameras record sparse illumination changes with high temporal resolution and high dynamic range. Thanks to their sparse recording and low consumption, they are increasingly used in applications such as AR/VR and autonomous driving. Current topperforming methods often ignore specific event-data properties, leading to the development of generic but computationally expensive algorithms, while event-aware methods do not perform as well. We propose Event Transformer+, that improves our seminal work EvT with a refined patch-based event representation and a more robust backbone to achieve more accurate results, while still benefiting from event-data sparsity to increase its efficiency. Additionally, we show how our system can work with different data modalities and propose specific output heads, for event-stream classification (i.e. action recognition) and per-pixel predictions (dense depth estimation). Evaluation results show better performance to the state-of-the-art while requiring minimal computation resources, both on GPU and CPU.

cs.CV↗

arXiv2023

A Framework for Fast Prototyping of Photo-realistic Environments with Multiple Pedestrians

Robotic applications involving people often require advanced perception systems to better understand complex real-world scenarios. To address this challenge, photo-realistic and physics simulators are gaining popularity as a means of generating accurate data labeling and designing scenarios for evaluating generalization capabilities, e.g., lighting changes, camera movements or different weather conditions. We develop a photo-realistic framework built on Unreal Engine and AirSim to generate easily scenarios with pedestrians and mobile robots. The framework is capable to generate random and customized trajectories for each person and provides up to 50 ready-to-use people models along with an API for their metadata retrieval. We demonstrate the usefulness of the proposed framework with a use case of multi-target tracking, a popular problem in real pedestrian scenarios. The notable feature variability in the obtained perception data is presented and evaluated.

cs.RO↗