arXiv subjects

Ana M. Sanchez

Publications and source records attributed to Ana M. Sanchez.

17 recordsLinked to original sources

arXiv2026

Interplay between Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations in phase-pure GaAs/InAs core/shell nanowires of different lengths

In GaAs/InAs core/shell nanowires, comprising a tubular conducting shell, interference phenomena observed under an axial field and originating from closed-loop states encircling the insulating core, provide an ideal platform for superconducting quantum devices that utilize effects such as Aharonov--Bohm or Altshuler--Aronov--Spivak-type conductance oscillations. Both effects are different in nature with respect to phase rigidity because of interference of non-time-reversed or time-reversed paths, respectively. Since their occurrence is largely governed by averaging effects, which depend on sample dimensions and the transport regime, we present a systematic study of flux-periodic oscillations of phase-pure zinc-blende GaAs/InAs core/shell nanowires as a function of gate voltage for samples with different contact separation lengths. Our analysis shows that with increasing contact separation length, averaging effects result in gradual reduction of $h/e$-periodic Aharonov--Bohm-type oscillations, while the $h/2e$-periodic Altshuler--Aronov--Spivak oscillations and its $h/4e$-periodic higher harmonics are enhanced. The additional phase rigidity seen in the $h/3e$-periodic oscillations is attributed to phase rigidity propagating from the neighbouring lower harmonics. Our tight-binding transport simulations on nanowires of different lengths which contain only a few scattering centers confirm the experimental observations regarding the different harmonics and their phase rigidity. Together, our experimental and simulation findings indicate quasi-ballistic transport with persistent Aharonov--Bohm-, and phase-rigid Altshuler--Aronov--Spivak-type oscillations despite few scattering centers.

cond-mat.mes-hall↗

arXiv2026

Predictive drift compensation of multi-frame STEM via live scan modification

Scanning transmission electron microscopy (STEM) is widely used tool for materials characterisation. However, being a scanned technique, STEM is susceptible to sample, stage or beam drift, manifesting as distortions within images or movement in the field-of-view during multi-frame imaging. Often this is corrected post-acquisition using image registration of multiple frames, but drift reduces the usable area common to all frames. Here we present a method to mitigate sample drift by analysing past frames to predict the sampling-grid points for the immediately future frame. We present this correction across two time-scales and two lengthscales. By offsetting the scan-grid framewise we remove long-range drift, and offsetting pixelwise we minimise intra-image warping. Examples are presented for both atomic-resolution imaging and lower-magnification in-situ video capture. The framework is general to raster, serpentine, interlaced and other scan patterns, as well as sequential or scan-rotation series STEM.

physics.ins-det↗

arXiv2025

Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations in the quasi-ballistic regime in phase-pure GaAs/InAs core/shell nanowires

The realization of various qubit systems based on high-quality hybrid superconducting quantum devices, is often achieved using semiconductor nanowires. For such hybrid devices, a good coupling between the superconductor and the conducting states in the semiconductor wire is crucial. GaAs/InAs core/shell nanowires with an insulating core, and a conductive InAs shell fulfill this requirement, since the electronic states are strongly confined near the surface. However, maintaining a good crystal quality in the conducting shell is a challenge for this type of nanowire. In this work, we present phase-pure zincblende GaAs/InAs core/shell nanowires and analyze their low-temperature magnetotransport properties. We observe pronounced magnetic flux quantum periodic oscillations, which can be attributed to a combination of Aharonov-Bohm and Altshuler-Aronov-Spivak oscillations. From the gate and temperature dependence of the conductance oscillations, as well as from supporting theoretical transport calculations, we conclude that the conducting states in the shell are in the quasi-ballistic transport regime, with few scattering centers, but nevertheless leading to an Altshuler-Aronov-Spivak correction that dominates at small magnetic field strengths. Our results demonstrate that phase-pure zincblende GaAs/InAs core/shell nanowires represent a very promising alternative semiconductor nanowire-based platform for hybrid quantum devices.

cond-mat.mes-hall↗

arXiv2024

Flux-periodic supercurrent oscillations in an Aharonov-Bohm-type nanowire Josephson junction

Phase winding effects in hollow semiconductor nanowires with superconducting shells have been proposed as a route to engineer topological superconducting states. We investigate GaAs/InAs core/shell nanowires with half-shells of epitaxial aluminium as a potential platform for such devices, where the thin InAs shell confines the electron wave function around the GaAs core. With normal contacts we observed pronounced $h/e$ flux periodic oscillations in the magnetoconductance, indicating the presence of a tubular conductive channel in the InAs shell. Conversely, the switching current in Josephson junctions oscillates with approximately half that period, i.e. $h/2e$, indicating transport via Andreev transport processes in the junction enclosing threading magnetic flux. On these structures, we systematically studied the gate-, field-, and temperature-dependent evolution of the supercurrent. Results indicate that Andreev transport processes can occur about the wire circumference indicating full proximitization of the InAs shell from the half-shell superconducting contacts.

cond-mat.mes-hall↗

arXiv2024

Teranga Go!: Carpooling Collaborative Consumption Community with multi-criteria hesitant fuzzy linguistic term set opinions to build confidence and trust

Classic Delphi and Fuzzy Delphi methods are used to test content validity of a data collection tools such as questionnaires. Fuzzy Delphi takes the opinion issued by judges from a linguistic perspective reducing ambiguity in opinions by using fuzzy numbers. We propose an extension named 2-Tuple Fuzzy Linguistic Delphi method to deal with scenarios in which judges show different expertise degrees by using fuzzy multigranular semantics of the linguistic terms and to obtain intermediate and final results expressed by 2-tuple linguistic values. The key idea of our proposal is to validate the full questionnaire by means of the evaluation of its parts, defining the validity of each item as a Decision Making problem. Taking the opinion of experts, we measure the degree of consensus, the degree of consistency, and the linguistic score of each item, in order to detect those items that affect, positively or negatively, the quality of the instrument. Considering the real need to evaluate a b-learning educational experience with a consensual questionnaire, we present a Decision Making model for questionnaire validation that solve it. Additionally, we contribute to this consensus reaching problem by developing an online tool under GPL v3 license. The software visualizes the collective valuations for each iteration and assists to determine which parts of the questionnaire should be modified to reach a consensual solution.

cs.CY↗

arXiv2022

Bi Incorporation and segregation in the MBE-grown GaAs-(Ga,Al)As-Ga(As,Bi) core-shell nanowires

Incorporation of Bi into GaAs-(Ga,Al)As-Ga(As,Bi) core-shell nanowires grown by molecular beam epitaxy is studied with transmission electron microscopy. Nanowires are grown on GaAs(111)B substrates with Au-droplet assisted mode. Bi-doped shells are grown at low temperature (300 °C) with a close to stoichiometric Ga/As flux ratio. At low Bi fluxes, the Ga(As,Bi) shells are smooth, with Bi completely incorporated into the shells. Higher Bi fluxes (Bi/As flux ratio ~ 4%) led to partial segregation of Bi as droplets on the nanowires sidewalls, preferentially located at the nanowire segments with wurtzite structure. We demonstrate that such Bi droplets on the sidewalls act as catalysts for the growth of branches perpendicular to the GaAs trunks. Due to the tunability between zinc-blende and wurtzite polytypes by changing the nanowire growth conditions, this effect enables fabrication of branched nanowire architectures with branches generated from selected (wurtzite) nanowire segments.

cond-mat.mtrl-sci↗

arXiv2021

Te-doped selective-area grown InAs nanowires for superconducting hybrid devices

Semiconductor nanowires have emerged as versatile components in superconducting hybrid devices for Majorana physics and quantum computing. The transport properties of nanowires can be tuned either by field-effect or doping. We investigated a series of InAs nanowires which conductivity has been modified by n-type doping using tellurium. In addition to electron microscopy studies, the wires were also examined with atomic probe tomography to obtain information about the local incorporation of Te atoms. It was found that the Te atoms mainly accumulate in the core of the nanowire and at the corners of the {110} side facets. The efficiency of n-type doping was also confirmed by transport measurements. As a demonstrator hybrid device, a Josephson junction was fabricated using a nanowire as a weak link. The corresponding measurements showed a clear increase of the critical current with increase of the dopant concentration.

cond-mat.mes-hall↗

arXiv2021

Thermally-driven formation of Ge quantum dots on self-catalysed thin GaAs nanowires

Embedding quantum dots (QDs) on nanowire (NW) sidewalls allows the integration of multi-layers of QDs into the active region of radial p-i-n junctions to greatly enhance light emission/absorption. However, the surface curvature makes the growth much more challenging compared with growths on thin-films, particularly on NWs with small diameters (Ø <100 nm). Moreover, the {110} sidewall facets of self-catalyzed NWs favor two-dimensional growth (2D), with the realization of three-dimensional (3D) Stranski-Krastanow growth becoming extremely challenging. Here, we demonstrate thermally-driven formation of Ge dots on the {110} sidewalls facets of thin self-catalyzed NWs without using any surfactant or surface treatment. The 2D-3D transition of the pseudomorphic Ge layer grown on GaAs NWs is driven by energy minimization under high-temperature annealing. This method opens a new avenue to integrate QDs on NWs without any restriction on NW diameter or elastic strain, which can allow the formation of QDs in a wider range of materials systems where the growth of islands by traditional mechanisms is not possible, with benefits for novel NWQD-based optoelectronic devices.

cond-mat.mes-hall↗

arXiv2021

Defect-Free Axially-Stacked GaAs/GaAsP Nanowire Quantum Dots with Strong Carrier Confinement

Axially-stacked quantum dots (QDs) in nanowires (NWs) have important applications in fabricating nanoscale quantum devices and lasers. Although their performances are very sensitive to crystal quality and structures, there is relatively little study on defect-free growth with Au-free mode and structure optimisation for achiving high performances. Here, we report a detailed study of the first self-catalyzed defect-free axially-stacked deep NWQDs. High structural quality is maintained when 50 GaAs QDs are placed in a single GaAsP NW. The QDs have very sharp interfaces (1.8~3.6 nm) and can be closely stacked with very similar structural properties. They exhibit the deepest carrier confinement (~90 meV) and largest exciton-biexciton splitting (~11 meV) among non-nitride III-V NWQDs, and can maintain good optical properties after being stored in ambient atmosphere for over 6 months due to excellent stability. Our study sets a solid foundation to build high-performance axially-stacked NWQD devices that are compatible with CMOS technologies.

physics.app-ph↗

arXiv2020

Robust Protection of III-V Nanowires in Water Splitting by a Thin Compact TiO$_2$ Layer

Narrow-bandgap III-V semiconductor nanowires (NWs) with a suitable band structure and strong light-trapping ability are ideal for high-efficiency low-cost solar water-splitting systems. However, due to their nanoscale dimension, they suffer more severe corrosion by the electrolyte solution than the thin-film counterparts. Thus, short-term durability is the major obstacle for using these NWs for practical water splitting applications. Here, we demonstrated for the first time that a thin layer (~7 nm thick) of compact TiO$_2$ deposited by atomic layer deposition can provide robust protection to III-V NWs. The protected GaAs NWs maintain 91.4% of its photoluminescence intensity after 14 months of storage in ambient atmosphere, which suggests the TiO$_2$ layer is pinhole-free. Working as a photocathode for water splitting, they exhibited a 45% larger photocurrent density compared with un-protected counterparts and a high Faraday efficiency of 91%, and can also maintain a record-long highly-stable performance among narrow-bandgap III-V NW photoelectrodes; after 67 hours photoelectrochemical stability test reaction in strong acid electrolyte solution (pH = 1), they show no apparent indication of corrosion, which is in stark contrast to the un-protected NWs that are fully failed after 35-hours. These findings provide an effective way to enhance both stability and performance of III-V NW based photoelectrodes, which are highly important for practical applications in solar-energy-based water splitting systems.

cond-mat.mes-hall↗

arXiv2020

Fully in-situ InAs nanowire Josephson junctions by selective-area growth and shadow evaporation

Josephson junctions based on InAs semiconducting nanowires and Nb superconducting electrodes are fabricated in-situ by a special shadow evaporation scheme for the superconductor electrode. Compared to other metallic superconductors such as Al, Nb has the advantage of a larger superconducting gap which allows operation at higher temperatures and magnetic fields. Our junctions are fabricated by shadow evaporation of Nb on pairs of InAs nanowires grown selectively on two adjacent tilted Si (111) facets and crossing each other at a small distance. The upper wire relative to the deposition source acts as a shadow mask determining the gap of the superconducting electrodes on the lower nanowire. Electron microscopy measurements show that the fully in-situ fabrication method gives a clean InAs/Nb interface. A clear Josephson supercurrent is observed in the current-voltage characteristics, which can be controlled by a bottom gate. The excess current of 0.68 indicates a high junction transparency. Under microwave radiation, pronounced integer Shapiro steps are observed suggesting a sinusoidal current-phase relation. Owing to the large critical field of Nb, the Josephson supercurrent can be maintained to magnetic fields exceeding 1 T. Our results show that in-situ prepared Nb/InAs nanowire contacts are very interesting candidates for superconducting quantum circuits requiring large magnetic fields.

cond-mat.supr-con↗

arXiv2020

Atomic and electronic structure of two-dimensional Mo(1-x)WxS2 alloys

Alloying enables engineering of the electronic structure of semiconductors for optoelectronic applications. Due to their similar lattice parameters, the two-dimensional semiconducting transition metal dichalcogenides of the MoWSeS group (MX2 where M= Mo or W and X=S or Se) can be grown as high-quality materials with low defect concentrations. Here we investigate the atomic and electronic structure of Mo(1-x)WxS2 alloys using a combination of high-resolution experimental techniques and simulations. Analysis of the Mo and W atomic positions in these alloys, grown by chemical vapour transport, shows that they are randomly distributed, consistent with Monte Carlo simulations that use interaction energies determined from first-principles calculations. Electronic structure parameters are directly determined from angle resolved photoemission spectroscopy measurements. These show that the spin-orbit splitting at the valence band edge increases linearly with W content from MoS2 to WS2, in agreement with linear-scaling density functional theory (LS-DFT) predictions. The spin-orbit splitting at the conduction band edge is predicted to reduce to zero at intermediate compositions. Despite this, polarisation-resolved photoluminescence spectra on monolayer Mo0.5W0.5S2 show significant circular dichroism, indicating that spin-valley locking is retained. These results demonstrate that alloying is an important tool for controlling the electronic structure of MX2 for spintronic and valleytronic applications.

cond-mat.mes-hall↗

arXiv2020

Hard-gap spectroscopy in a self-defined mesoscopic InAs/Al nanowire Josephson junction

Superconductor/semiconductor-nanowire hybrid structures can serve as versatile building blocks to realize Majorana circuits or superconducting qubits based on quantized levels such as Andreev qubits. For all these applications it is essential that the superconductor-semiconductor interface is as clean as possible. Furthermore, the shape and dimensions of the superconducting electrodes needs to be precisely controlled. We fabricated self-defined InAs/Al core/shell nanowire junctions by a fully in-situ approach, which meet all these criteria. Transmission electron microscopy measurements confirm the sharp and clean interface between the nanowire and the in-situ deposited Al electrodes which were formed by means of shadow evaporation. Furthermore, we report on tunnel spectroscopy, gate and magnetic field-dependent transport measurements. The achievable short junction lengths,the observed hard-gap and the magnetic field robustness make this new hybrid structure very attractive for applications which rely on a precise control of the number of sub-gap states, like Andreev qubits or topological systems.

cond-mat.mes-hall↗

arXiv2018

High-Responsivity Photodetection by Self-Catalyzed Phase-Pure P-GaAs Nanowire

Defects are detrimental for optoelectronics devices, such as stacking faults can form carrier-transportation barriers, and foreign impurities (Au) with deep-energy levels can form carrier traps and non-radiative recombination centers. Here, we first developed self-catalyzed p-type GaAs nanowires (NWs) with pure zinc blende (ZB) structure, and then fabricated photodetector made by these NWs. Due to absence of stacking faults and suppression of large amount of defects with deep energy levels, the photodetector exhibits room-temperature high photo responsivity of 1.45 x 105 A W^-1 and excellent specific detectivity (D*) up to 1.48 x 10^14 Jones for low-intensity light signal of wavelength 632.8 nm, which outperforms previously reported NW-based photodetectors. These results demonstrate that these self-catalyzed pure-ZB GaAs NWs to be promising candidates for optoelectronics applications.

cond-mat.mes-hall↗

arXiv2015

Artefacts in geometric phase analysis of compound materials

The geometric phase analysis (GPA) algorithm is known as a robust and straightforward technique that can be used to measure lattice strains in high resolution transmission electron microscope (TEM) images. It is also attractive for analysis of aberration-corrected scanning TEM (ac-STEM) images that resolve every atom column, since it uses Fourier transforms and does not require real-space peak detection and assignment to appropriate sublattices. Here it is demonstrated that in ac-STEM images of compound materials (i.e. with more than one atom per unit cell) an additional phase is present in the Fourier transform. If the structure changes from one area to another in the image (e.g. across an interface), the change in this additional phase will appear as a strain in conventional GPA, even if there is no lattice strain. Strategies to avoid this pitfall are outlined.

cond-mat.mtrl-sci↗

arXiv2014

Lateral heterojunctions within monolayer semiconductors

Heterojunctions between three-dimensional (3D) semiconductors with different bandgaps are the basis of modern light-emitting diodes, diode lasers, and high-speed transistors. Creating analogous heterojunctions between different two-dimensional (2D) semiconductors would enable band engineering within the 2D plane and open up new realms in materials science, device physics and engineering. Here we demonstrate that seamless high-quality in-plane heterojunctions can be grown between the 2D monolayer semiconductors MoSe2 and WSe2. The junctions, grown by lateral hetero-epitaxy using physical vapor transport, are visible in an optical microscope and show enhanced photoluminescence. Atomically resolved transmission electron microscopy reveals that their structure is an undistorted honeycomb lattice in which substitution of one transition metal by another occurs across the interface. The growth of such lateral junctions will allow new device functionalities, such as in-plane transistors and diodes, to be integrated within a single atomically thin layer.

cond-mat.mes-hall↗

arXiv2012

III-V quantum light source and cavity-QED on Silicon

Non-classical light sources offer a myriad of possibilities in fundamental science and applications including quantum cryptography and quantum lithography. Single photons can encode quantum information and multi-qubit gates in silica waveguide circuits have been used to demonstrate linear optical quantum computing. Scale-up requires miniaturisation of the waveguide circuit and multiple photon sources. Silicon photonics, driven by the incentive of optical interconnects, is a highly promising platform for the passive components, but integrated light sources are limited by silicon's indirect band-gap. III-V semiconductor quantum-dots, on the other hand, are proven quantum emitters. Here we demonstrate single-photon emission from quantum-dots coupled to photonic crystal nanocavities fabricated from III-V material grown directly on silicon substrates. The high quality of the III-V material and photonic structures is emphasized by observation of the strong-coupling regime. This work opens-up the advantages of silicon photonics to the integration and scale-up of solid-state quantum optical systems.

cond-mat.mes-hall↗