Searcharxiv⌕ Search

arXiv subjects

Ana S. Moita

Publications and source records attributed to Ana S. Moita.

3 recordsLinked to original sources

DefocusTrackerAI -- A Generalized Framework for the Automatic Detection of Defocused Particle Images

The present work introduces DefocusTrackerAI, a generalized deep-learning framework for the automatic detection and position estimation of defocused particle images from any kind of optical configuration without compromising uncertainty and recall, intended as a follow-up of the open-source project DefocusTracker. We selected the deep neural network architecture from the direct comparison of two well-known object detection models, Faster R-CNN and YOLOv9, trained on a diverse and feature-rich synthetic image set containing astigmatic and non-astigmatic defocused particle images of varying diameters. The model evaluation on synthetic data showed that, first, YOLOv9 outperforms Faster R-CNN, achieving higher recall and lower uncertainty, particularly at high particle image densities; and second, that YOLOv9 provides enhanced spatial resolution, with uncertainty values between 0.1 and 0.4 pixels for particle image densities N_s up to 0.5, outperforming state-of-the-art algorithms. We demonstrated that our models are able to detect astigmatic and non-astigmatic defocused particle images in multiple optical setups with varying lighting conditions. In addition, we successfully applied our models on real DPT experiments, including fluorescence and shadowgraph data, showing that they can be used beyond conventional DPT applications, including the tracking of sprays and droplets. A pre-trained, ready-to-use version of DefocusTrackerAI based on YOLOv9 is available at https://gitlab.com/goncalo.coutinho/defocustrackerAI-main/-/tree/7e0f11f649ebad50e20dca5b9545f26ca303ebe0 and can be used for automatic detection of defocused particle images of any kind with high accuracy. In combination with a suitable calibration approach for the depth position, it can be used as an effective first step for three-dimensional defocusing particle tracking.

cs.CV↗

Tetralin + fullerene C60 solutions for thermal management of flat-plate photovoltaic/thermal collector

A new composite heat transfer fluid consisting of tetralin and fullerene has been proposed for photovoltaic thermal hybrid solar harvesting. It features a unique absorption spectrum that is capable of sharply cutting off solar energy irradiated in the range of wavelength from 300 to 650 nm, making it a perfect candidate for simultaneous harvesting of both photovoltaic and thermal components of solar energy. The proposed composite revealed outstanding stability and facile synthesize root, which are the two main obstacles for applicability of nanofluids. It was shown experimentally that the additives of fullerene to tetralin do not alter significantly it's thermophysical properties apart from viscosity that increases moderately. Besides, tetralin/fullerene solutions show similar thermohydraulics performance to that of pure tetralin in laminar flow regime or insignificantly lower in transient and turbulent flow regimes. A new figure of merit was proposed to analyze the thermohydraulics performance that consider not only exergy losses due to the kinetic energy dissipation, but also exergy losses associated with a finite temperature difference in the heat exchanger. As a result, the proposed figure of merit indicates the decrease of the heat transfer performance of tetralin/fullerene solutions that directly proportional to fullerene concentration. The performed simulation suggests that the total energy efficiency of flat-plate photovoltaic/thermal solar collector goes up to 60.4 % estimated according regulation (EU) No. 811/2013. Finally, life cycle analysis revealed further improvement root in view of environmental impact.

physics.flu-dyn↗

Experimental and numerical characterization of single-phase pressure drop and heat transfer enhancement in helical corrugated tubes

The internal flow in corrugated tubes of different helical pitch, covering from the laminar to turbulent regime, was studied in order to characterize the three-dimensional flow and the influence of corrugation geometry on pressure drop and convective heat transfer. With water as working fluid and an imposed wall heat flux, ranging from around 4 to 33 kW/m2, a numerical model was developed with a CFD commercial software, where k-omega SST was used to model turbulence. Experimental tests were performed covering Reynolds numbers in the range from around 300 up to 5000, which allowed to identify the transition region and validate the numerical model. The results show that due to the swirl induced by the corrugation, the critical Reynolds number for the start of transition to turbulent flow is reduced. The thermal performance factor, which quantifies the heat transfer enhancement at the expense of pressure drop, was used to compare the corrugated tubes against the reference case of smooth tube. Based on this, all investigated corrugated geometries performed better than the smooth tube, except for low Reynolds numbers (Re<500) in the laminar regime. Overall, the corrugated tube with the lowest pitch showed a clearly better performance for the intermediate range of Reynolds numbers (1000<Re<2300), being an optimal choice for a wider range of operating conditions in the transitional and turbulent flow regimes.

physics.flu-dyn↗