arXiv subjects

Anastasia Alexov

Publications and source records attributed to Anastasia Alexov.

10 recordsLinked to original sources

arXiv2026

Modeling of the diffuse background produced by the Vera C. Rubin Observatory M2 baffle scattered light

The Vera C. Rubin Observatory, with its unprecedented field of view and fast focal ratio, will survey the entire sky every 3.5 nights. This unique capacity requires dealing with off axis light that can produce stray light artefacts on the images. The secondary mirror (M2) baffle restricts the light that reaches the LSSTCam detector and it contributes to shaping the inner edge of the telescope optical pupil. This work studies the contribution to the background from the light scattered by the M2 baffle itself. The evanescence of this feature, together with the challenge of isolating it from the sky background, led to the necessity of performing in dome tests using a Collimated Beam Projector (CBP), normally used for calibration purposes. To complete the analysis, in addition to the in dome tests, an on sky observational campaign was conducted. This campaign employed both stellar targets and the Moon as illumination sources in order to determine the actual energy associated with the feature. The test data have been retro fitted thanks to the combination of ray tracing simulation, CBP and on sky data to infer the intensity and spatial distribution of the background scattered light within the different LSSTCam filters. We quantified the on sky impact of scattered light from the M2 baffle, both for light coming from bright and red stars and from the Moon. We also developed an approximate relation to transform the in dome measurements into predictions of on sky behavior. This transformation was achieved by comparing the illumination footprint produced by an off axis star with that generated by the CBP and by mapping the stellar Spectral Energy Distribution (SED) onto the CBP's set of discrete wavelengths. Finally, we extrapolated the scattered light behavior of the Moon to stellar sources, in order to build a compplete description of the M2 baffle contribution over the full range of magnitudes.

astro-ph.IM↗

arXiv2026

Investigation and Mitigation of a Prominent Off-Axis Stray Light Path in Rubin Observatory Commissioning

The "scratched tape" stray light feature is the most prominent and prevalent stray light artifact identified during the commissioning of the Vera C. Rubin Observatory. The scratched tape feature originates when light from large off-axis angles (~20 deg) passes between the mid-level and center-section light baffles, reflects off the primary mirror, and illuminates the LSST Camera focal plane. This scenario represented an unobstructed stray light path to the sky during Rubin commissioning due to delays in the integration of the dome slit light-wind screen. This document describes the identification, modeling, characterization, and mitigation of the scratched tape stray light artifact.

astro-ph.IM↗

arXiv2026

An overview of stray light findings and interpretation during on-sky commissioning of LSSTCam

Wide-field telescopes are intrinsically difficult to shield from unwanted stray and scattered light, while the search to identify sources of contaminating light is frequently a challenging task. The Vera C.~Rubin Observatory, which achieved its first photon with the LSST Camera (LSSTCam) on April 15, 2025, will initiate a revolutionary era for the study of dark matter, dark energy, the transient sky, the Solar System, and the Milky Way. LSSTCam will provide near seeing-limited images of the sky in six bands ($u,g,r,i,z,y$) over a $3.^\circ 5$-diameter field of view, and over the course of a decade, it will execute the Legacy Survey of Space and Time (LSST). This work provides an overview of the dedicated stray and scattered light test campaign that has been undertaken since the start of Rubin commissioning. In particular, we highlight the processes used to characterize, model, and mitigate stray light present in LSSTCam images. The Rubin commissioning team created a series of testing and analysis tools to track stray light artifacts from their initial discovery through reproduction with timely observations, simulation using ray tracing to identify opto-mechanical origins, and finally devising corrective actions. The complex stray light features encountered by Rubin provide a wealth of experience for the future wide-field and extremely wide-field observatories. This work covers the many stages of a long journey that started with conceiving an innovative and challenging optical design, followed by the engineering and system engineering efforts to build it, to finally delivering an optimized and revolutionary cutting-edge facility.

astro-ph.IM↗

arXiv2026

The Rubin Observatory Target-of-Opportunity System in the First Year of Operations

The NSF/DOE Vera C. Rubin Observatory is a discovery machine, with unprecedented survey speed, which can be used to identify exotic astrophysical transients. In its prime mission, the ten year Legacy Survey of Space and Time will use 3% of its total time for Target of Opportunity observations, which includes response to gravitational wave events, high energy neutrinos, potentially-hazardous asteroids, and other astrophysical phenomena. Target of Opportunity observations exist outside of the usual LSST operational mode, requiring special attention to maximize performance. We review the Rubin Target of Opportunity system during its first year of Rubin Observatory operations, the Targets of Opportunity pursued since LSST first light, and the overall efficiency of the system.

astro-ph.IM↗

arXiv2026

The Vera C. Rubin Observatory Data Preview 1

We present Rubin Data Preview 1 DP1, the first data from the NSF DOE Vera C Rubin Observatory, comprising raw and calibrated single epoch images, coadds, difference images, detection catalogs, and ancillary data products. DP1 is based on 1792 optical near infrared exposures acquired over 48 distinct nights by the Rubin Commissioning Camera LSSTComCam on the Simonyi Survey Telescope at the Summit Facility on Cerro Pachón Chile in late 2024. DP1 covers $\sim$15 deg$^2$ distributed across seven roughly equal-sized non-contiguous fields, each independently observed in six broad photometric bands $ugrizy$. The median FWHM of the point spread function across all bands is approximately 1.14 arcseconds, with the sharpest images reaching about 0.58 arcseconds. The 5$σ$ point source depths for coadded images in the deepest field the Extended Chandra Deep Field South are $u$ = 24.55, $g$ = 26.18, $r$ = 25.96, $i$ = 25.71, $z$ = 25.07, $y$ = 23.1. Other fields are no more than 2.2 magnitudes shallower in any band where they have nonzero coverage. DP1 contains approximately 2.3 million distinct astrophysical objects, of which 1.6 million are extended in at least one band in coadds and 431 solar system objects of which 93 are new discoveries. DP1 is approximately 3.5 TB in size and is available to Rubin data rights holders via the Rubin Science Platform a cloud based environment for the analysis of petascale astronomical data. While small compared to future LSST releases its high quality and diversity of data support a broad range of early science investigations ahead of full operations in 2026.

astro-ph.IM↗

arXiv2025

Enabling Early Transient Discovery in LSST via Difference Imaging with DECam

We present SLIDE, a pipeline that enables transient discovery in data from the Vera C. Rubin Observatory's Legacy Survey of Space and Time (LSST), using archival images from the Dark Energy Camera (DECam) as templates for difference imaging. We apply this pipeline to the recently released Data Preview 1 (DP1; the first public release of Rubin commissioning data) and search for transients in the resulting difference images. The image subtraction, photometry extraction, and transient detection are all performed on the Rubin Science Platform. We demonstrate that SLIDE effectively extracts clean photometry by circumventing poor or missing LSST templates. We identified 29 previously unreported transients, 12 of which would not have been detected based on the DP1 DiaObject catalog. SLIDE will be especially useful for transient analysis in the early years of LSST, when template coverage will be largely incomplete or when templates may be contaminated by transients present at the time of acquisition. We present multiband light curves for a sample of known transients, along with new transient candidates identified through our search. Finally, we discuss the prospects of applying this pipeline during the main LSST survey. Our pipeline is broadly applicable and will support studies of all transients with slowly evolving phases.

astro-ph.HE↗

arXiv2025

Variability-finding in Rubin Data Preview 1 with LSDB

The Vera C. Rubin Observatory recently released Data Preview 1 (DP1) in advance of the upcoming Legacy Survey of Space and Time (LSST), which will enable boundless discoveries in time-domain astronomy over the next ten years. DP1 provides an ideal sandbox for validating innovative data analysis approaches for the LSST mission, whose scale challenges established software infrastructure paradigms. This note presents a pair of such pipelines for variability-finding using powerful software infrastructure suited to LSST data, namely the HATS (Hierarchical Adaptive Tiling Scheme) format and the LSDB framework, developed by the LSST Interdisciplinary Network for Collaboration and Computing (LINCC) Frameworks team. This article presents a pair of variability-finding pipelines built on LSDB, the HATS catalog of DP1 data, and preliminary results of detected variable objects, two of which are novel discoveries.

astro-ph.IM↗

arXiv2015

Learning from FITS: Limitations in use in modern astronomical research

The Flexible Image Transport System (FITS) standard has been a great boon to astronomy, allowing observatories, scientists and the public to exchange astronomical information easily. The FITS standard, however, is showing its age. Developed in the late 1970s, the FITS authors made a number of implementation choices that, while common at the time, are now seen to limit its utility with modern data. The authors of the FITS standard could not anticipate the challenges which we are facing today in astronomical computing. Difficulties we now face include, but are not limited to, addressing the need to handle an expanded range of specialized data product types (data models), being more conducive to the networked exchange and storage of data, handling very large datasets, and capturing significantly more complex metadata and data relationships. There are members of the community today who find some or all of these limitations unworkable, and have decided to move ahead with storing data in other formats. If this fragmentation continues, we risk abandoning the advantages of broad interoperability, and ready archivability, that the FITS format provides for astronomy. In this paper we detail some selected important problems which exist within the FITS standard today. These problems may provide insight into deeper underlying issues which reside in the format and we provide a discussion of some lessons learned. It is not our intention here to prescribe specific remedies to these issues; rather, it is to call attention of the FITS and greater astronomical computing communities to these problems in the hope that it will spur action to address them.

astro-ph.IM↗

arXiv2010

LOFAR and HDF5: Toward a New Radio Data Standard

For decades now, scientific data volumes have experienced relentless, exponential growth. As a result, legacy astronomical data formats are straining under a burden not conceived when these formats were first introduced. With future astronomical projects ensuring this trend, ASTRON and the LOFAR project are exploring the use of the Hierarchical Data Format, version 5 (HDF5), for LOFAR radio data encapsulation. Most of LOFAR's standard data products will be stored using the HDF5 format. In addition, HDF5 analogues for traditional radio data structures such as visibility data and spectral image cubes are also being developed. The HDF5 libraries allow for the construction of distributed, entirely unbounded files. The nature of the HDF5 format further provides the ability to custom design a data encapsulation format, specifying hierarchies, content and attributes. The LOFAR project has designed several data formats that will accommodate and house all LOFAR data products, the primary styles and kinds of which are presented in this paper. With proper development and support, it is hoped that these data formats will be adopted by other astronomical projects as they, too, attempt to grapple with a future filled with mountains of data.

astro-ph.IM↗

arXiv2010

Early Pulsar Observations with LOFAR

This contribution to the proceedings of "A New Golden Age for Radio Astronomy" is simply intended to give some of the highlights from pulsar observations with LOFAR at the time of its official opening: June 12th, 2010. These observations illustrate that, though LOFAR is still under construction and astronomical commissioning, it is already starting to deliver on its promise to revolutionize radio astronomy in the low-frequency regime. These observations also demonstrate how LOFAR has many "next-generation" capabilities, such as wide-field multi-beaming, that will be vital to open a new Golden Age in radio astronomy through the Square Kilometer Array and its precursors.

astro-ph.IM↗