Searcharxiv⌕ Search

arXiv subjects

Anastasiia Zalogina

Publications and source records attributed to Anastasiia Zalogina.

10 recordsLinked to original sources

Twist-Reconfigurable van der Waals Moiré Photonic Crystals

Moiré photonics has emerged as a fascinating concept to design and in situ control of the optical bands. Moiré enabled light localisation arises from the relative twist between periodic layers, rather than from fixed, pre-fabricated cavity features. So far, however, the realisation of practical moiré photonic crystals in the visible range has been elusive, due to challenges in engineering nanoscale structures and twisting them dynamically post fabrication. Here, we realise a mechanically reconfigurable moiré photonic crystal, comprising from two patterned van der Waals crystals (tungsten di sulphide, WS$_2$) slabs separated by an optically active hexagonal boron nitride (hBN) spacer. We reconfigured the same pair of WS$_2$ slabs from a twist angle of 3.8° to 8.4° and reconstructed their three-dimensional dispersion using momentum-resolved reflectivity spectroscopy. Further, by reducing the twist angle between the slabs, we observe a denser manifold of folded and hybridised resonances that coincides with a 30-fold enhancement of emission from embedded colour centres. Our results open exciting opportunities for in-situ dispersion engineering and programmable light matter interactions employing van der Waals nanostructures.

physics.optics↗

Visible Integrated Photonics with Tantalum Pentoxide

Developing chip-scale photonic platforms for the visible spectrum is essential for translating next-generation optical technologies. Here, we demonstrate that tantalum pentoxide Ta2O5 on insulator is a highly promising material framework for these applications, supporting high-Q resonator architectures across the visible spectral range. Utilizing routine and scalable thin-film deposition and fabrication methodologies, we realize Ta2O5 waveguide and resonator layouts compatible with photonic integrated circuit (PIC) architectures. Through a comparison with numerical simulations, we characterise compact racetrack resonators, evaluating their performance in both the green and blue spectral regions. In addition, we fabricate large-scale ring resonators exhibiting record-high quality factors for Ta2O5 in the visible spectrum, exceeding 7.0 x 10^4. These results highlight the immense potential of this platform for visible photonic systems and establish a robust, straightforward baseline for future visible integrated optics.

physics.optics↗

Deterministic integration of quantum emitters and optical cavities in a van der Waals crystal

Single-photon emitters in hexagonal boron nitride (hBN) combine bright optical emission with optically addressable spin states, offering a promising platform for integrated quantum photonics. However, their stochastic creation and spectral variability have prevented deterministic integration with photonic cavities. Here we demonstrate a fabrication protocol that enables precise, deterministic coupling of pre-selected visible emitters to circular Bragg grating (CBG) cavities in hBN. By patterning etched alignment markers and performing prefabrication confocal mapping, we locate emitters with sub-micron accuracy and design cavity geometries matched to their zero-phonon line wavelengths. The resulting devices show enhanced emission and reliable spectral alignment between emitter and cavity mode. This work establishes a deterministic cavity-emitter integration scheme in a van der Waals material and provides a scalable route towards on-chip quantum photonic and spin-based platforms using hBN.

physics.optics↗

Sensing with Twisted Light: Precision Measurement of Fractional Azimuthal Index to Determine Refractive Index

Light beams possessing orbital angular momentum (OAM) have gained significant interest in areas such as optical manipulation, quantum entanglement, and super-resolved imaging. In itself, the OAM for a Laguerre-Gaussian beam is proportional to the azimuthal index of the light field, $l$. It is in fact continuous in nature and a non-trivial parameter to measure. The ability to determine $l$ precisely would broaden the use of such beams for new applications. In this study, we generate Laguerre-Gaussian beams of differing $l$ through mode conversion using microscopic spiral phase plates (SPPs). The exact value of $l$ imparted for a given incident wavelength is dependant upon the refractive index of the media within which the SPP is immersed. Here, we show an ultra-precise approach based on laser speckle to measure the azimuthal index of these generated beams to a precision of $2\,{\times}\,10^{-5}$. This is an improvement of three orders of magnitude over previous studies. In turn, this leverages an ultra-precise measurement of the refractive index of the medium surrounding the SPP, with a best measured precision of $6.4\,{\times}\,10^{-7}$\,refractive index units. This is confirmed to be at the shot-noise limit of the system. Our study interrogates samples of sucrose and haemoglobin, only 300\,pL in volume, within a microfluidic channel. This demonstration of an original form of microfluidic refractive index sensor, based on mode conversion to light fields with OAM, may be multiplexed to measure spatio-temporal variations and gradients within biological samples.

physics.optics↗

An Inverse Design Wavelength Demultiplexer for On-Chip Photoluminescence Sorting in TMDC Heterostructures

Emerging two-dimensional transition metal dichalcogenides (TMDCs) offer a promising platform for on-chip integrated photonics because of their unique optical and electronic properties. Their naturally passivated surfaces make them highly tolerant to lattice mismatch, enabling seamless heterogeneous integration by stacking different van der Waals materials, a crucial step in the development of advanced photonic devices. Here, we demonstrate the use of an inverse design wavelength demultiplexing waveguides for on-chip sorting and routing of distinct photoluminescence from the heterojunction formed by WS2 and WSe2 monolayers. The integrated nanophotonic chip splits and sorts excitonic emission into individual waveguides at room temperature. Our demonstration opens up new perspectives for integrating light sources in van der Waals materials with functional integrated photonics, offering a versatile platform for both fundamental research and practical applications.

physics.optics↗

A Van der Waals Moiré Bilayer Photonic Crystal Cavity

Enhancing light-matter interactions with photonic structures is critical in classical and quantum nanophotonics. Recently, Moiré twisted bilayer optical materials have been proposed as a promising means towards a tunable and controllable platform for nanophotonic devices, with proof of principle realisations in the near infrared spectral range. However, the realisation of Moiré photonic crystal (PhC) cavities has been challenging, due to a lack of advanced nanofabrication techniques and availability of standalone transparent membranes. Here, we leverage the properties of the van der Waals material hexagonal Boron Nitride to realize Moiré bilayer PhC cavities. We design and fabricate a range of devices with controllable twist angles, with flatband modes in the visible spectral range (~ 450 nm). Optical characterization confirms the presence of spatially periodic cavity modes originating from the engineered dispersion relation (flatband). Our findings present a major step towards harnessing a two-dimensional van der Waals material for the next-generation of on chip, twisted nanophotonic systems.

physics.optics↗

Double Etch Method for the Fabrication of Nanophotonic Devices from Van der Waals Materials

The integration of van der Waals (vdW) materials into photonic devices has laid out a foundation for many new quantum and optoelectronic applications. Despite tremendous progress in the nanofabrication of photonic building blocks from vdW crystals, there are still limitations, specifically with large-area devices and masking. Here, we focus on hexagonal boron nitride (hBN) as a vdW material and present a double etch method that overcomes problems associated with methods that employ metallic films and resist-based films for masking. Efficacy of the developed protocol is demonstrated by designing and fabricating a set of functional photonic components including waveguides, ring resonators and photonic crystal cavities. The functionality of the fabricated structures is demonstrated through optical characterization over several key spectral ranges. These include the near-infrared and blue ranges, where the hBN boron vacancy (VB-) spin defects and the coherent B center quantum emitters emit, respectively. The double etch method enables fabrication of high-quality factor optical cavities and constitutes a promising pathway toward on-chip integration of vdW materials.

physics.optics↗

High harmonic generation from a subwavelength dielectric resonator

Higher-order optical harmonics entered the realm of nanostructured solids being observed recently in optical gratings and metasurfaces with a subwavelength thickness. Structuring materials at the subwavelength scale allows for resonant enhancing of the efficiency of nonlinear processes and reducing the size of high-harmonic sources. Here we report the observation of up to a seventh harmonic generated from a single subwavelength resonator made of AlGaAs material. This process is enabled by careful engineering of the resonator geometry for supporting optical modes associated with a quasi-bound state in the continuum in the mid-infrared spectral range at around λ=3.7 μm pump wavelength. The resonator volume measures ~ 0.1 λ^3. The resonant modes are excited with an azimuthally polarized tightly focused beam. We evaluate the contributions of perturbative and non-perturbative nonlinearities to the harmonic generation process. Our work proves the possibility to miniaturize solid-state sources of high harmonics to the subwavelength volumes.

physics.optics↗

Enhanced five-photon photoluminescence in subwavelength AlGaAs resonators

Multiphoton processes of absorption photoluminescence have enabled a wide range of applications including three-dimensional microfabrication, data storage, and biological imaging. While the applications of two-photon and three-photon absorption and luminescence have matured considerably, higher-order photoluminescence processes remain more challenging to study due to their lower efficiency, particularly in subwavelength systems. Here we report the observation of it five-photon luminescence from a single subwavelength nanoantenna at room temperature enabled by the Mie resonances. We excite an AlGaAs resonator at around 3.6 um and observe photoluminescence at around 740 nm. We show that the interplay of the Mie multipolar modes at the subwavelength scale can enhance the efficiency of the five-photon luminescence by at least four orders of magnitude, being limited only by sensitivity of our detector. Our work paves the way towards applications of higher-order multiphoton processes at the subwavelength scales enabled by the physics of Mie resonances.

physics.optics↗

Control of NV center radiation in nanodiamonds by silicon nanoantennas

The development of nanophotonics systems for the manipulation of the luminescent properties of single quantum emitters is essential for quantum communication and computing. Dielectric nanosystems enable various opportunities for light control through inherent electric and magnetic resonances, however their full potential has not yet been discovered. Here, the emission properties of NV centers in nanodiamonds placed in the near-field zone of silicon nanoresonators are investigated. It is demonstrated experimentally that the spontaneous emission rate of single NV centers in 50 nm nanodiamonds can be modified by their coupling to spherical nanoantennas, reducing the mode of the lifetime distribution by approximately 2 times from 16 ns to 9 ns. It is also shown that the collected intensity of photoluminescence emission from the multiple NV centers in 150 nm nanodiamond coupled to a cylindrical nanoantenna is increased by more than 50% compared to the intensity from the same nanodiamond on a bare substrate

physics.optics↗