arXiv subjects

Anat Siddharth

Publications and source records attributed to Anat Siddharth.

17 recordsLinked to original sources

arXiv2025

Narrow-linewidth, piezoelectrically tunable photonic integrated blue laser

Frequency-agile lasers operating in the ultraviolet-to-blue spectral range (360-480 nm) are critical enablers for a wide range of technologies, including free-space and underwater optical communications, optical atomic clocks, and Rydberg-atom-based quantum computing platforms. Integrated photonic lasers offer a compelling platform for these applications by combining low-noise performance with fast frequency tuning in a compact, robust form factor through monolithic integration. However, realizing such lasers in the blue spectral range remains challenging due to limitations in current semiconductor materials and photonic integration techniques. Here, we report the first demonstration of a photonic integrated blue laser at around 461 nm, which simultaneously achieves frequency agility and low phase noise. This implementation is based on the hybrid integration of a gallium nitride-based laser diode, which is self-injection locked to a high-Q microresonator fabricated on a low-loss silicon nitride photonic platform with 0.4 dB/cm propagation loss. The laser exhibits a sub-30 kHz linewidth and delivers over 1 mW of optical output power. In addition, aluminum nitride piezoelectric actuators are monolithically integrated onto the photonic circuitry to enable high-speed modulation of the refractive index, and thus tuning the laser frequency. This enables mode-hop-free laser linear frequency chirps with excursions up to 900 MHz at repetition rates up to 1 MHz, with tuning nonlinearity below 2%. We showcase the potential applications of this integrated laser in underwater communication and coherent aerosol sensing experiments.

physics.optics↗

arXiv2024

Monolithic piezoelectrically tunable hybrid integrated laser with sub-fiber laser coherence

Ultra-low noise lasers are essential tools in a wide variety of applications, including data communication, light detection and ranging (LiDAR), quantum computing and sensing, and optical metrology. Recent advances in integrated photonics, specifically the development of ultra-low loss silicon nitride (Si$_3$N$_4$) platform, have allowed attaining performance that exceeds conventional legacy laser systems, including the phase noise of fiber lasers. This platform can moreover be combined with monolithic integration of piezoelectrical materials, enabling frequency agile low noise lasers. However, this approach has to date not surpassed the trade-off between ultra-low frequency noise and frequency agility. Here we overcome this challenge and demonstrate a fully integrated laser based on the Si$_3$N$_4$ platform with frequency noise lower than that of a fiber laser, while maintaining the capability for high-speed modulation of the laser frequency. The laser achieves an output power of 30 mW with an integrated linewidth of 4.3 kHz and an intrinsic linewidth of 3 Hz, demonstrating phase noise performance that is on par with or lower than commercial fiber lasers. Frequency agility is accomplished via a monolithically integrated piezoelectric aluminum nitride (AlN) micro-electro-mechanical system (MEMS) actuator, which enables a flat frequency actuation bandwidth extending up to 400 kHz. This combination of ultra-low noise and frequency agility is a useful feature enabling tight laser locking for frequency metrology, fiber sensing, and coherent sensing applications. Our results demonstrate the ability of 'next generation' integrated photonic circuits (beyond silicon) to exceed the performance of legacy laser systems in terms of coherence and frequency actuation.

physics.optics↗

arXiv2024

Ultrafast tunable photonic integrated Pockels extended-DBR laser

Frequency-agile lasers that can simultaneously feature low noise characteristics as well as fast mode hop-free frequency tuning are keystone components for applications ranging from frequency modulated continuous wave (FMCW) LiDAR, to coherent optical communication and gas sensing. The hybrid integration of III-V gain media with low-loss photonic integrated circuits (PICs) has recently enabled integrated lasers with faster tuning and lower phase noise than the best legacy systems, including fiber lasers. In addition, lithium niobate on insulator (LNOI) PICs have enabled to exploit the Pockels effect to demonstrate self-injection locked hybrid lasers with tuning rates reaching peta-hertz per second. However, Pockels-tunable laser archetypes relying on high-Q optical microresonators have thus far only achieved limited output powers, are difficult to operate and stabilize due to the dynamics of self-injection locking, and require many analog control parameters. Here, we overcome this challenge by leveraging an extended distributed Bragg reflector (E-DBR) architecture to demonstrate a simple and turn-key operable frequency-agile Pockels laser that can be controlled with single analog operation and modulation inputs. Our laser supports a continuous mode hop-free tuning range of over 10 GHz with good linearity and flat actuation bandwidth up to 10 MHz, while achieving over 15 mW in-fiber output power at 1545 nm and kHz-level intrinsic linewidth, a combination unmet by legacy bulk lasers. This hybrid laser design combines an inexpensive reflective semiconductor optical amplifier (RSOA) with an electro-optic DBR PIC manufactured at wafer-scale on a LNOI platform. We showcase the performance and flexibility of this laser in proof-of-concept coherent optical ranging (FMCW LiDAR) demonstration, achieving a 4 cm distance resolution and in a hydrogen cyanide spectroscopy experiment.

physics.optics↗

arXiv2024

Piezoelectric actuation for integrated photonics

Recent decades have seen significant advancements in integrated photonics, driven by improvements in nanofabrication technology. This field has developed from integrated semiconductor lasers and low-loss waveguides to optical modulators, enabling the creation of sophisticated optical systems on a chip scale capable of performing complex functions like optical sensing, signal processing, and metrology. The tight confinement of optical modes in photonic waveguides further enhances the optical nonlinearity, leading to a variety of nonlinear optical phenomena such as optical frequency combs, second-harmonic generation, and supercontinuum generation. Active tuning of photonic circuits is crucial not only for offsetting variations caused by fabrication in large-scale integration, but also serves as a fundamental component in programmable photonic circuits. Piezoelectric actuation in photonic devices offers a low-power, high-speed solution and is essential in the design of future photonic circuits due to its compatibility with materials like Si and Si3N4, which do not exhibit electro-optic effects. Here, we provide a detailed review of the latest developments in piezoelectric tuning and modulation, by examining various piezoelectric materials, actuator designs tailored to specific applications, and the capabilities and limitations of current technologies. Additionally, we explore the extensive applications enabled by piezoelectric actuators, including tunable lasers, frequency combs, quantum transducers, and optical isolators. These innovative ways of managing photon propagation and frequency on-chip are expected to be highly sought after in the future advancements of advanced photonic chips for both classical and quantum optical information processing and computing.

physics.optics↗

arXiv2024

Hydrogen-free low-temperature silica for next generation integrated photonics

The advances in novel low-loss "on insulator" integrated photonics platforms beyond silicon, such as thin-film LiNbO3, LiTaO3, GaP and BaTiO3 have demonstrated major potential across a wide range of applications, due to their unique electro-optical or nonlinear optical properties. This has heralded novel devices, ranging from low-voltage and high-speed modulators to parametric amplifiers. For such photonic integrated circuits, a low-loss SiO2 cladding layer is a key element, serving as a passivation layer for the waveguides and enabling efficient fiber-to-chip coupling. However, numerous novel ferroelectric or III-V "on insulator" platforms have low tolerances for process temperature. This prohibits using high-temperature anneals to remove hydrogen, a common impurity that is inherent to ordinary chemical vapor deposited SiO2 and causes significant optical loss in the near infrared. Here, we satisfy the dichotomy of a low-loss wafer scale manufactured SiO2 cladding and low processing temperature. Inspired by the manufacturing of optical fibers, we introduce a hydrogen-free, low-loss SiO2 cladding that is deposited at low temperatures (300 degrees Celsius) by using SiCl4 and O2 as precursors in inductively coupled plasma-enhanced chemical vapor deposition (ICPCVD). By replacing hydrogenous silicon precursors (e.g. SiH4) with SiCl4, the deposited film is inherently free from residual hydrogen. The process temperature is compatible with the "on insulator" platforms and CMOS electronic integrated circuits. We demonstrate a wide low-loss window that covers all telecommunication bands from 1260 nm to 1625 nm. We achieve a < 2.5 dB/m waveguide loss at 1550 nm, comparable with 1200 degree Celsius annealed films. Our SiCl4 process provides a key future cladding for all recently emerged "on-insulator" photonics platforms, that is low cost, scalable in manufacturing, and directly foundry compatible.

physics.optics↗

arXiv2023

Bidirectional microwave-optical transduction based on integration of high-overtone bulk acoustic resonators and photonic circuits

Coherent interconversion between microwave and optical frequencies can serve as both classical and quantum interfaces for computing, communication, and sensing. Here, we present a compact microwave-optical transducer based on monolithic integration of piezoelectric actuators atop silicon nitride photonic circuits. Such an actuator directly couples microwave signals to a high-overtone bulk acoustic resonator defined by the suspended silica cladding of the optical waveguide core, which leads to enhanced electromechanical and optomechanical couplings. At room temperature, this triply resonant piezo-optomechanical transducer achieves an off-chip photon number conversion efficiency of -48 dB over a bandwidth of 25 MHz at an input pump power of 21 dBm. The approach is scalable in manufacturing and, unlike existing electro-optic transducers, does not rely on superconducting resonators. As the transduction process is bidirectional, we further demonstrate synthesis of microwave pulses from a purely optical input. Combined with the capability of leveraging multiple acoustic modes for transduction, the present platform offers prospects for building frequency-multiplexed qubit interconnects and for microwave photonics at large.

quant-ph↗

arXiv2023

Hertz-linewidth and frequency-agile photonic integrated extended-DBR lasers

Recent advances in the development of ultra-low loss silicon nitride (Si3N4)-based photonic integrated circuits have allowed integrated lasers to achieve a coherence exceeding those of fiber lasers and enabled unprecedentedly fast (Megahertz bandwidth) tuning using monolithically integrated piezoelectrical actuators. While this marks the first time that fiber laser coherence is achieved using photonic integrated circuits, in conjunction with frequency agility that exceeds those of legacy bulk lasers, the approach is presently compounded by the high cost of manufacturing DFB, as required for self-injection locking, as well as the precise control over the laser current and temperature to sustain a low noise locked operation. Reflective semiconductor optical amplifiers (RSOA) provide a cost-effective alternative solution but have not yet achieved similar performance in coherence or frequency agility, as required for frequency modulated continuous wave (FMCW) LiDAR, laser locking in frequency metrology or wavelength modulation spectroscopy for gas sensing. Here, we overcome this challenge and demonstrate an RSOA-based and frequency agile integrated laser tuned with high speed, good linearity, high optical output power, and turn-key operability while maintaining a small footprint. This is achieved using a tunable extended distributed Bragg reflector (E-DBR) in an ultra-low loss 200 nm thin Si3N4 platform with monolithically integrated piezoelectric actuators. We co-integrate the DBR with a compact ultra-low loss spiral resonator to further reduce the intrinsic optical linewidth of the laser to the Hertz level -- on par with the noise of a fiber laser -- via self-injection locking.

physics.optics↗

arXiv2023

Frequency agile photonic integrated external cavity laser

Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution.

physics.optics↗

arXiv2023

An Integrated Photon-Pair Source with Monolithic Piezoelectric Frequency Tunability

This work demonstrates the capabilities of an entangled photon-pair source at telecom wavelengths, based on a photonic integrated Si$_3$N$_4$ microresonator with monolithically integrated piezoelectric frequency tuning. Previously, frequency tuning of photon-pairs generated by microresonators has only been demonstrated using thermal control, however these have limited actuation bandwidth, and are not compatible with cryogenic environments. Here, the frequency-tunable photon-pair generation capabilities of a Si$_3$N$_4$ microresonator with a monolithically integrated aluminium nitride layer are shown. Fast-frequency locking of the microresonator to an external laser is demonstrated, with a resulting locking bandwidth orders of magnitude larger than reported previously using thermal locking. These abilities will have direct application in future schemes which interface such sources with quantum memories based on e.g. trapped-ion or rare-earth ion schemes.

quant-ph↗

arXiv2022

A heterogeneously integrated lithium niobate-on-silicon nitride photonic platform

The availability of thin-film lithium niobate on insulator (LNOI) and advances in processing have led to the emergence of fully integrated LiNbO3 electro-optic devices, including low-voltage, high-speed modulators, electro-optic frequency combs, and microwave-optical transducers. Yet to date, LiNbO3 photonic integrated circuits (PICs) have mostly been fabricated using non-standard etching techniques that lack the reproducibility routinely achieved in silicon photonics. Widespread future application of thin-film LiNbO3 requires a reliable and scalable solution using standard processing and precise lithographic control. Here we demonstrate a heterogeneously integrated LiNbO3 photonic platform that overcomes the abovementioned challenges by employing wafer-scale bonding of thin-film LiNbO3 to planarized low-loss silicon nitride (Si3N4) photonic integrated circuits, a mature foundry-grade integrated photonic platform. The resulting devices combine the substantial Pockels effect of LiNbO3 with the scalability, high-yield, and complexity of the underlying Si3N4 PICs. Importantly, the platform maintains the low propagation loss (<0.1 dB/cm) and efficient fiber-to-chip coupling (<2.5 dB per facet) of the Si3N4 waveguides. We find that ten transitions between a mode confined in the Si3N4 PIC and the hybrid LiNbO$_3$ mode produce less than 0.8 dB additional loss, corresponding to a loss per transition not exceeding 0.1 dB. These nearly lossless adiabatic transitions thus link the low-loss passive Si3N4 photonic structures with electro-optic components. We demonstrate high-Q microresonators, optical splitters, electrically tunable photonic dimers, electro-optic frequency combs, and carrier-envelope phase detection of a femtosecond laser on the same platform, thus providing a reliable and foundry-ready solution to low-loss and complex LiNbO3 integrated photonic circuits.

physics.optics↗

arXiv2022

Ultrafast tunable lasers using lithium niobate integrated photonics

Recent advances in the processing of thin-film LNOI have enabled low-loss photonic integrated circuits, modulators with improved half-wave voltage, electro-optic frequency combs and novel on-chip electro-optic devices, with applications ranging from 5G telecommunication and microwave photonics to microwave-to-optical quantum interfaces. Lithium niobate integrated photonic circuits could equally be the basis of integrated narrow-linewidth frequency-agile lasers. Pioneering work on polished lithium niobate crystal resonators has led to the development of electrically tunable narrow-linewidth lasers. Here we report low-noise frequency-agile lasers based on lithium niobate integrated photonics and demonstrate their use for coherent laser ranging. This is achieved through heterogeneous integration of ultra-low-loss silicon nitride photonic circuits with thin-film lithium niobate via direct wafer bonding. This platform features low propagation loss of 8.5 dB/m enabling narrow-linewidth lasing (intrinsic linewidth of 3 kHz) by self-injection locking to a III-V semiconductor laser diode. The hybrid mode of the resonator allows electro-optical laser frequency tuning at a speed of 12 PHz/s with high linearity, low hysteresis and while retaining narrow linewidth. Using this hybrid integrated laser, we perform a proof-of-concept FMCW LiDAR ranging experiment, with a resolution of 15 cm. By fully leveraging the high electro-optic coefficient of lithium niobate, with further improvements in photonic integrated circuits design, these devices can operate with CMOS-compatible voltages, or achieve mm-scale distance resolution. Endowing low loss silicon nitride integrated photonics with lithium niobate, gives a platform with wide transparency window, that can be used to realize ultrafast tunable lasers from the visible to the mid-infrared, with applications from OCT and LiDAR to environmental sensing.

physics.optics↗

arXiv2022

Tightly confining lithium niobate photonic integrated circuits and lasers

Photonic integrated circuits are indispensible for data transmission within modern datacenters and pervade into multiple application spheres traditionally limited for bulk optics, such as LiDAR and biosensing. Of particular interest are ferroelectrics such as Lithium Niobate, which exhibit a large electro-optical Pockels effect enabling ultrafast and efficient modulation, but are difficult to process via dry etching . For this reason, etching tightly confining waveguides - routinely achieved in silicon or silicon nitride - has not been possible. Diamond-like carbon (DLC) was discovered in the 1950s and is a material that exhibits an amorphous phase, excellent hardness, and the ability to be deposited in nano-metric thin films. It has excellent thermal, mechanical, and electrical properties, making it an ideal protective coating. Here we demonstrate that DLC is also a superior material for the manufacturing of next-generation photonic integrated circuits based on ferroelectrics, specifically Lithium Niobate on insulator (LNOI). Using DLC as a hard mask, we demonstrate the fabrication of deeply etched, tightly confining, low loss photonic integrated circuits with losses as low as 5.6 dB/m. In contrast to widely employed ridge waveguides, this approach benefits from a more than 1 order of magnitude higher area integration density while maintaining efficient electro-optical modulation, low loss, and offering a route for efficient optical fiber interfaces. As a proof of concept, we demonstrate a frequency agile hybrid integrated III-V Lithium Niobate based laser with kHz linewidth and tuning rate of 0.7 Peta-Hertz per second with excellent linearity and CMOS-compatible driving voltage. Our approach can herald a new generation of tightly confining ferroelectric photonic integrated circuits.

physics.optics↗

arXiv2022

Near ultraviolet photonic integrated lasers based on silicon nitride

Low phase noise lasers based on the combination of III-V semiconductors and silicon photonics are well established in the near-infrared spectral regime. Recent advances in the development of low-loss silicon nitride-based photonic integrated resonators have allowed to outperform bulk external diode and fiber lasers in both phase noise and frequency agility in the 1550 nm-telecommunication window. Here, we demonstrate for the first time a hybrid integrated laser composed of a gallium nitride (GaN) based laser diode and a silicon nitride photonic chip-based microresonator operating at record low wavelengths as low as 410 nm in the near-ultraviolet wavelength region suitable for addressing atomic transitions of atoms and ions used in atomic clocks, quantum computing, or for underwater LiDAR. Using self-injection locking to a high Q (0.4 $\times$ 10$^6$) photonic integrated microresonator we observe a phase noise reduction of the Fabry-Pérot laser at 461 nm by a factor greater than 100$\times$, limited by the device quality factor and back-reflection.

physics.optics↗

arXiv2021

Ultralow-noise frequency-agile photonic integrated lasers

Low-noise lasers are of central importance in a wide variety of applications, including high spectral-efficiency coherent communication protocols, distributed fibre sensing, and long distance coherent LiDAR. In addition to low phase noise, frequency agility, that is, the ability to achieve high-bandwidth actuation of the laser frequency, is imperative for triangular chirping in frequency-modulated continuous-wave (FMCW) based ranging or any optical phase locking as routinely used in metrology. While integrated silicon-based lasers have experienced major advances and are now employed on a commercial scale in data centers, integrated lasers with sub-100 Hz-level intrinsic linewidth are based on optical feedback from photonic circuits that lack frequency agility. Here, we demonstrate a wafer-scale-manufacturing-compatible hybrid photonic integrated laser that exhibits ultralow intrinsic linewidth of 25 Hz while offering unsurpassed megahertz actuation bandwidth, with a tuning range larger than 1 GHz. Our approach uses ultralow-loss (1 dB/m) Si$_3$N$_4$ photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise. By utilizing difference drive and apodization of the photonic chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm.

physics.optics↗

arXiv2021

Coherent terahertz-to-microwave link using electro-optic-modulated Turing rolls

Arising from modulation instability, Turing rolls in optical Kerr microresonators have been used in the generation of optical frequency combs and the synthesis of microwave and terahertz frequencies. In this work, by applying electro-optic modulation on terahertz-frequency Turing rolls, we implement electro-optic frequency division with a microcomb to synthesize variable low-noise microwave signals. We also actively stabilize the terahertz oscillations to a microwave reference via intracavity power modulation, obtaining fractional frequency instabilities that are better than those of the free-running situation by up to six orders of magnitude. This study not only highlights the extraordinary spectral purity of Turing roll oscillations but also opens the way for bidirectional terahertz-to-microwave links with hybrid optical frequency comb techniques.

physics.optics↗

arXiv2021

Magnetic-Free Silicon Nitride Integrated Optical Isolator

Integrated photonics has enabled signal synthesis, modulation and conversion using photonic integrated circuits (PIC). Many materials have been developed, among which silicon nitride (Si$_3$N$_4$) has emerged as a leading platform particularly for nonlinear photonics. Low-loss Si$_3$N$_4$ PIC has been widely used for frequency comb generation, narrow-linewidth lasers, microwave photonics, photonic computing networks, and even surface-electrode ion traps. Yet, among all demonstrated functionalities for Si$_3$N$_4$ integrated photonics, optical non-reciprocal devices, such as isolators and circulators, have not been achieved. Conventionally, they are realized based on Faraday effect of magneto-optic materials under external magnetic field. However, it has been challenging to integrate magneto-optic materials that are not CMOS-compatible and that require bulky external magnet. Here, we demonstrate a magnetic-free optical isolator based on aluminum nitride (AlN) piezoelectric modulators monolithically integrated on ultralow-loss Si$_3$N$_4$ PIC. The transmission reciprocity is broken by spatio-temporal modulation of a Si$_3$N$_4$ microring resonator with three AlN bulk acoustic wave resonators that are driven with a rotational phase. This design creates an effective rotating acoustic wave that allows indirect interband transition in only one direction among a pair of strongly coupled optical modes. Maximum of 10 dB isolation is achieved under 100 mW RF power applied to each actuator, with minimum insertion loss of 0.1 dB. The isolation remains constant over nearly 30 dB dynamic range of optical input power, showing excellent optical linearity. Our integrated, linear, magnetic-free, electrically driven optical isolator could become key building blocks for integrated lasers, chip-scale LiDAR engines, as well as optical interfaces for superconducting circuits.

physics.optics↗

arXiv2015

Tunneling dynamics of correlated bosons in a double well potential

The quantum dynamics of a few bosons in a double well potential is studied using a Bose Hubbard model. We consider both signs for the on-site interparticle interaction and also investigated the situations where they are large and small. Interesting distinctive features are noted for the tunneling oscillations of these bosons corresponding to the above scenarios. Further, the sensitivity of the particle dynamics to the initial conditions has been studied. It is found that corresponding to an odd number of particles, such as three (or five), an initial condition of having unequal number of particles in the wells has interesting consequences, which is most discernible when the population difference between the wells is unity.

cond-mat.quant-gas↗