Searcharxiv⌕ Search

arXiv subjects

Anatoly Khina

Publications and source records attributed to Anatoly Khina.

26 records · Page 2Linked to original sources

Multi-Rate Control over AWGN Channels via Analog Joint Source-Channel Coding

We consider the problem of controlling an unstable plant over an additive white Gaussian noise (AWGN) channel with a transmit power constraint, where the signaling rate of communication is larger than the sampling rate (for generating observations and applying control inputs) of the underlying plant. Such a situation is quite common since sampling is done at a rate that captures the dynamics of the plant and which is often much lower than the rate that can be communicated. This setting offers the opportunity of improving the system performance by employing multiple channel uses to convey a single message (output plant observation or control input). Common ways of doing so are through either repeating the message, or by quantizing it to a number of bits and then transmitting a channel coded version of the bits whose length is commensurate with the number of channel uses per sampled message. We argue that such "separated source and channel coding" can be suboptimal and propose to perform joint source-channel coding. Since the block length is short we obviate the need to go to the digital domain altogether and instead consider analog joint source-channel coding. For the case where the communication signaling rate is twice the sampling rate, we employ the Archimedean bi-spiral-based Shannon-Kotel'nikov analog maps to show significant improvement in stability margins and linear-quadratic Gaussian (LQG) costs over simple schemes that employ repetition.

eess.SY↗

The MIMO Wiretap Channel Decomposed

The problem of sending a secret message over the Gaussian multiple-input multiple-output (MIMO) wiretap channel is studied. While the capacity of this channel is known, it is not clear how to construct optimal coding schemes that achieve this capacity. In this work, we use linear operations along with successive interference cancellation to attain effective parallel single-antenna wiretap channels. By using independent scalar Gaussian wiretap codebooks over the resulting parallel channels, the capacity of the MIMO wiretap channel is achieved. The derivation of the schemes is based upon joint triangularization of the channel matrices. We find that the same technique can be used to re-derive capacity expressions for the MIMO wiretap channel in a way that is simple and closely connected to a transmission scheme. This technique allows to extend the previously proven strong security for scalar Gaussian channels to the MIMO case. We further consider the problem of transmitting confidential messages over a two-user broadcast MIMO channel. For that problem, we find that derivation of both the capacity and a transmission scheme is a direct corollary of the proposed analysis for the MIMO wiretap channel.

cs.IT↗

Joint Unitary Triangularization for Gaussian Multi-User MIMO Networks

The problem of transmitting a common message to multiple users over the Gaussian multiple-input multiple-output broadcast channel is considered, where each user is equipped with an arbitrary number of antennas. A closed-loop scenario is assumed, for which a practical capacity-approaching scheme is developed. By applying judiciously chosen unitary operations at the transmit and receive nodes, the channel matrices are triangularized so that the resulting matrices have equal diagonals, up to a possible multiplicative scalar factor. This, along with the utilization of successive interference cancellation, reduces the coding and decoding tasks to those of coding and decoding over the single-antenna additive white Gaussian noise channel. Over the resulting effective channel, any off-the-shelf code may be used. For the two-user case, it was recently shown that such joint unitary triangularization is always possible. In this paper, it is shown that for more than two users, it is necessary to carry out the unitary linear processing jointly over multiple channel uses, i.e., space-time processing is employed. It is further shown that exact triangularization, where all resulting diagonals are equal, is still not always possible, and appropriate conditions for the existence of such are established for certain cases. When exact triangularization is not possible, an asymptotic construction is proposed, that achieves the desired property of equal diagonals up to edge effects that can be made arbitrarily small, at the price of processing a sufficiently large number of channel uses together.

cs.IT↗

(Almost) Practical Tree Codes

We consider the problem of stabilizing an unstable plant driven by bounded noise over a digital noisy communication link, a scenario at the heart of networked control. To stabilize such a plant, one needs real-time encoding and decoding with an error probability profile that decays exponentially with the decoding delay. The works of Schulman and Sahai over the past two decades have developed the notions of tree codes and anytime capacity, and provided the theoretical framework for studying such problems. Nonetheless, there has been little practical progress in this area due to the absence of explicit constructions of tree codes with efficient encoding and decoding algorithms. Recently, linear time-invariant tree codes were proposed to achieve the desired result under maximum-likelihood decoding. In this work, we take one more step towards practicality, by showing that these codes can be efficiently decoded using sequential decoding algorithms, up to some loss in performance (and with some practical complexity caveats). We supplement our theoretical results with numerical simulations that demonstrate the effectiveness of the decoder in a control system setting.

cs.IT↗

Layered Uplink Transmission in Clustered Cellular Networks

The demand for higher data rates and the scarce spectrum resources drive the adoption of collaborative communication techniques. In this work we shown that the existing cluster based collaborative schemes can be greatly improved in terms of both the achievable performance, and complexity, by allowing overlapping across clusters. Further improvement is achieved by incorporating scheduling to the decoding process. Different variants of the improved schemes are considered and are shown to achieve near optimum performance for practical signal-to-noise ratios for the one- and two-dimensional (hexagonal) Wyner-type models.

cs.IT↗

Space-Time MIMO Multicasting

Multicasting is the general method of conveying the same information to multiple users over a broadcast channel. In this work, the Gaussian MIMO broadcast channel is considered, with multiple users and any number of antennas at each node. A "closed loop" scenario is assumed, for which a practical capacity-achieving multicast scheme is constructed. In the proposed scheme, linear modulation is carried over time and space together, which allows to transform the problem into that of transmission over parallel scalar sub-channels, the gains of which are equal, except for a fraction of sub-channels that vanishes with the number of time slots used. Over these sub-channels, off-the-shelf fixed-rate AWGN codes can be used to approach capacity.

cs.IT↗

Modulation for MIMO Networks with Several Users

In a recent work, a capacity-achieving scheme for the common-message two-user MIMO broadcast channel, based on single-stream coding and decoding, was described. This was obtained via a novel joint unitary triangularization which is applied to the corresponding channel matrices. In this work, the triangularization is generalized, to any (finite) number of matrices, allowing multi-user applications. To that end, multiple channel uses are jointly treated, in a manner reminiscent of space-time coding. As opposed to the two-user case, in the general case there does not always exist a perfect (capacity-achieving) solution. However, a nearly optimal scheme (with vanishing loss in the limit of large blocks) always exists. Common-message broadcasting is but one example of communication networks with MIMO links which can be solved using an approach coined "Network Modulation"; the extension beyond two links carries over to these problems.

cs.IT↗

Joint Unitary Triangularization for MIMO Networks

This work considers communication networks where individual links can be described as MIMO channels. Unlike orthogonal modulation methods (such as the singular-value decomposition), we allow interference between sub-channels, which can be removed by the receivers via successive cancellation. The degrees of freedom earned by this relaxation are used for obtaining a basis which is simultaneously good for more than one link. Specifically, we derive necessary and sufficient conditions for shaping the ratio vector of sub-channel gains of two broadcast-channel receivers. We then apply this to two scenarios: First, in digital multicasting we present a practical capacity-achieving scheme which only uses scalar codes and linear processing. Then, we consider the joint source-channel problem of transmitting a Gaussian source over a two-user MIMO channel, where we show the existence of non-trivial cases, where the optimal distortion pair (which for high signal-to-noise ratios equals the optimal point-to-point distortions of the individual users) may be achieved by employing a hybrid digital-analog scheme over the induced equivalent channel. These scenarios demonstrate the advantage of choosing a modulation basis based upon multiple links in the network, thus we coin the approach "network modulation".

cs.IT↗