arXiv subjects

Anders Bjorholm Dahl

Publications and source records attributed to Anders Bjorholm Dahl.

28 records · Page 2Linked to original sources

arXiv2025

Disconnect to Connect: A Data Augmentation Method for Improving Topology Accuracy in Image Segmentation

Accurate segmentation of thin, tubular structures (e.g., blood vessels) is challenging for deep neural networks. These networks classify individual pixels, and even minor misclassifications can break the thin connections within these structures. Existing methods for improving topology accuracy, such as topology loss functions, rely on very precise, topologically-accurate training labels, which are difficult to obtain. This is because annotating images, especially 3D images, is extremely laborious and time-consuming. Low image resolution and contrast further complicates the annotation by causing tubular structures to appear disconnected. We present CoLeTra, a data augmentation strategy that integrates to the models the prior knowledge that structures that appear broken are actually connected. This is achieved by creating images with the appearance of disconnected structures while maintaining the original labels. Our extensive experiments, involving different architectures, loss functions, and datasets, demonstrate that CoLeTra leads to segmentations topologically more accurate while often improving the Dice coefficient and Hausdorff distance. CoLeTra's hyper-parameters are intuitive to tune, and our sensitivity analysis shows that CoLeTra is robust to changes in these hyper-parameters. We also release a dataset specifically suited for image segmentation methods with a focus on topology accuracy. CoLetra's code can be found at https://github.com/jmlipman/CoLeTra.

cs.CV↗

arXiv2025

A General Purpose Spectral Foundational Model for Both Proximal and Remote Sensing Spectral Imaging

Spectral imaging data acquired via multispectral and hyperspectral cameras can have hundreds of channels, where each channel records the reflectance at a specific wavelength and bandwidth. Time and resource constraints limit our ability to collect large spectral datasets, making it difficult to build and train predictive models from scratch. In the RGB domain, we can often alleviate some of the limitations of smaller datasets by using pretrained foundational models as a starting point. However, most existing foundation models are pretrained on large datasets of 3-channel RGB images, severely limiting their effectiveness when used with spectral imaging data. The few spectral foundation models that do exist usually have one of two limitations: (1) they are built and trained only on remote sensing data limiting their application in proximal spectral imaging, (2) they utilize the more widely available multispectral imaging datasets with less than 15 channels restricting their use with hundred-channel hyperspectral images. To alleviate these issues, we propose a large-scale foundational model and dataset built upon the masked autoencoder architecture that takes advantage of spectral channel encoding, spatial-spectral masking and ImageNet pretraining for an adaptable and robust model for downstream spectral imaging tasks.

cs.CV↗

arXiv2025

Feature-Centered First Order Structure Tensor Scale-Space in 2D and 3D

The structure tensor method is often used for 2D and 3D analysis of imaged structures, but its results are in many cases very dependent on the user's choice of method parameters. We simplify this parameter choice in first order structure tensor scale-space by directly connecting the width of the derivative filter to the size of image features. By introducing a ring-filter step, we substitute the Gaussian integration/smoothing with a method that more accurately shifts the derivative filter response from feature edges to their center. We further demonstrate how extracted structural measures can be used to correct known inaccuracies in the scale map, resulting in a reliable representation of the feature sizes both in 2D and 3D. Compared to the traditional first order structure tensor, or previous structure tensor scale-space approaches, our solution is much more accurate and can serve as an out-of-the-box method for extracting a wide range of structural parameters with minimal user input.

cs.CV↗

arXiv2024

BugNIST -- a Large Volumetric Dataset for Object Detection under Domain Shift

Domain shift significantly influences the performance of deep learning algorithms, particularly for object detection within volumetric 3D images. Annotated training data is essential for deep learning-based object detection. However, annotating densely packed objects is time-consuming and costly. Instead, we suggest training models on individually scanned objects, causing a domain shift between training and detection data. To address this challenge, we introduce the BugNIST dataset, comprising 9154 micro-CT volumes of 12 bug types and 388 volumes of tightly packed bug mixtures. This dataset is characterized by having objects with the same appearance in the source and target domains, which is uncommon for other benchmark datasets for domain shift. During training, individual bug volumes labeled by class are utilized, while testing employs mixtures with center point annotations and bug type labels. Together with the dataset, we provide a baseline detection analysis, with the aim of advancing the field of 3D object detection methods.

cs.CV↗

arXiv2023

SportsPose -- A Dynamic 3D sports pose dataset

Accurate 3D human pose estimation is essential for sports analytics, coaching, and injury prevention. However, existing datasets for monocular pose estimation do not adequately capture the challenging and dynamic nature of sports movements. In response, we introduce SportsPose, a large-scale 3D human pose dataset consisting of highly dynamic sports movements. With more than 176,000 3D poses from 24 different subjects performing 5 different sports activities, SportsPose provides a diverse and comprehensive set of 3D poses that reflect the complex and dynamic nature of sports movements. Contrary to other markerless datasets we have quantitatively evaluated the precision of SportsPose by comparing our poses with a commercial marker-based system and achieve a mean error of 34.5 mm across all evaluation sequences. This is comparable to the error reported on the commonly used 3DPW dataset. We further introduce a new metric, local movement, which describes the movement of the wrist and ankle joints in relation to the body. With this, we show that SportsPose contains more movement than the Human3.6M and 3DPW datasets in these extremum joints, indicating that our movements are more dynamic. The dataset with accompanying code can be downloaded from our website. We hope that SportsPose will allow researchers and practitioners to develop and evaluate more effective models for the analysis of sports performance and injury prevention. With its realistic and diverse dataset, SportsPose provides a valuable resource for advancing the state-of-the-art in pose estimation in sports.

cs.CV↗

arXiv2021

Sparse-View Spectral CT Reconstruction Using Deep Learning

Spectral computed tomography (CT) is an emerging technology capable of providing high chemical specificity, which is crucial for many applications such as detecting threats in luggage. This type of application requires both fast and high-quality image reconstruction and is often based on sparse-view (few) projections. The conventional filtered back projection (FBP) method is fast but it produces low-quality images dominated by noise and artifacts in sparse-view CT. Iterative methods with, e.g., total variation regularizers can circumvent that but they are computationally expensive, as the computational load proportionally increases with the number of spectral channels. Instead, we propose an approach for fast reconstruction of sparse-view spectral CT data using a U-Net convolutional neural network architecture with multi-channel input and output. The network is trained to output high-quality CT images from FBP input image reconstructions. Our method is fast at run-time and because the internal convolutions are shared between the channels, the computational load increases only at the first and last layers, making it an efficient approach to process spectral data with a large number of channels. We have validated our approach using real CT scans. Our results show qualitatively and quantitatively that our approach outperforms the state-of-the-art iterative methods. Furthermore, the results indicate that the network can exploit the coupling of the channels to enhance the overall quality and robustness.

eess.IV↗

arXiv2020

Content-based Propagation of User Markings for Interactive Segmentation of Patterned Images

Efficient and easy segmentation of images and volumes is of great practical importance. Segmentation problems that motivate our approach originate from microscopy imaging commonly used in materials science, medicine, and biology. We formulate image segmentation as a probabilistic pixel classification problem, and we apply segmentation as a step towards characterising image content. Our method allows the user to define structures of interest by interactively marking a subset of pixels. Thanks to the real-time feedback, the user can place new markings strategically, depending on the current outcome. The final pixel classification may be obtained from a very modest user input. An important ingredient of our method is a graph that encodes image content. This graph is built in an unsupervised manner during initialisation and is based on clustering of image features. Since we combine a limited amount of user-labelled data with the clustering information obtained from the unlabelled parts of the image, our method fits in the general framework of semi-supervised learning. We demonstrate how this can be a very efficient approach to segmentation through pixel classification.

cs.CV↗

arXiv2019

Guiding 3D U-nets with signed distance fields for creating 3D models from images

Morphological analysis of the left atrial appendage is an important tool to assess risk of ischemic stroke. Most deep learning approaches for 3D segmentation is guided by binary labelmaps, which results in voxelized segmentations unsuitable for morphological analysis. We propose to use signed distance fields to guide a deep network towards morphologically consistent 3D models. The proposed strategy is evaluated on a synthetic dataset of simple geometries, as well as a set of cardiac computed tomography images containing the left atrial appendage. The proposed method produces smooth surfaces with a closer resemblance to the true surface in terms of segmentation overlap and surface distance.

eess.IV↗

arXiv2018

Multi-Spectral Imaging via Computed Tomography (MUSIC) - Comparing Unsupervised Spectral Segmentations for Material Differentiation

Multi-spectral computed tomography is an emerging technology for the non-destructive identification of object materials and the study of their physical properties. Applications of this technology can be found in various scientific and industrial contexts, such as luggage scanning at airports. Material distinction and its identification is challenging, even with spectral x-ray information, due to acquisition noise, tomographic reconstruction artefacts and scanning setup application constraints. We present MUSIC - and open access multi-spectral CT dataset in 2D and 3D - to promote further research in the area of material identification. We demonstrate the value of this dataset on the image analysis challenge of object segmentation purely based on the spectral response of its composing materials. In this context, we compare the segmentation accuracy of fast adaptive mean shift (FAMS) and unconstrained graph cuts on both datasets. We further discuss the impact of reconstruction artefacts and segmentation controls on the achievable results. Dataset, related software packages and further documentation are made available to the imaging community in an open-access manner to promote further data-driven research on the subject

cs.CV↗

arXiv2018

Three Dimensional Polarimetric Neutron Tomography of Magnetic Fields

Through the use of Time-of-Flight Three Dimensional Polarimetric Neutron Tomography (ToF 3DPNT) we have for the first time successfully demonstrated a technique capable of measuring and reconstructing three dimensional magnetic field strengths and directions unobtrusively and non-destructively with the potential to probe the interior of bulk samples which is not amenable otherwise. Using a pioneering polarimetric set-up for ToF neutron instrumentation in combination with a newly developed tailored reconstruction algorithm, the magnetic field generated by a current carrying solenoid has been measured and reconstructed, thereby providing the proof-of-principle of a technique able to reveal hitherto unobtainable information on the magnetic fields in the bulk of materials and devices, due to a high degree of penetration into many materials, including metals, and the sensitivity of neutron polarisation to magnetic fields. The technique puts the potential of the ToF time structure of pulsed neutron sources to full use in order to optimise the recorded information quality and reduce measurement time.

physics.ins-det↗