arXiv subjects

André Csillaghy

Publications and source records attributed to André Csillaghy.

9 recordsLinked to original sources

arXiv2026

First results from PADRE/MeDDEA: X-rays from a flare and its CME

The MeDDEA hard X-ray spectrometer onboard NASAs PADRE CubeSat operates four flight-spare detectors from the Solar Orbiter/STIX instrument. This paper aims to evaluate the accuracy of the MeDDEA calibration and to demonstrate that MeDDEA data are ready for scientific exploitation. Using the first joint observations between MeDDEA and STIX, we investigate faint HXR emission associated with an escaping CME relative to the emission from the full flare. The first large flare observed by MeDDEA is analyzed, and the MeDDEA spectrum is compared with simultaneous observations from Fermi/GBM and ASO-S/HXI. From the Solar Orbiter viewpoint, the flare is highly limb-occulted allowing STIX to isolate high coronal emission associated with the CME while MeDDEA observed the full flare. We combined spectral fitting with HXR/EUV imaging from STIX, HXI, and AIA to investigate the locations and energetics of the flare- and CME-associated HXR sources. The MeDDEA spectral observations are in agreement with FERMI/GBM and ASO-S/HXI within 10 percent in the energy range of 18-30 keV. The CME-associated photon flux observed by STIX in the nonthermal range is faint at about 1 percent of the flare photon flux. The energy content of the thermal component associated with the CME, on the other hand, is found to be of the same order of magnitude as the thermal energy of the flare loop, at least for a filling factor of unity. Imaging information from STIX in combination with AIA reveals that the emission measured by STIX is located within the associated CME. We report that MeDDEA provides scientifically reliable spectral observations and is ready for scientific use.

astro-ph.SR↗

arXiv2026

Electric Potential Patterns Forecasting in the Southern Hemisphere with Deep Learning Techniques

Space weather disturbances driven by the solar wind can degrade satellite navigation, disrupt radio communications, and threaten power infrastructure, making accurate forecasting of the high-latitude ionosphere's response a critical operational need. Existing approaches, empirical climatological models and physics-based magnetohydrodynamic simulations, either smooth out the ionosphere's time-dependent, non-linear response or are too computationally expensive for real-time use, while prior machine learning efforts have mostly targeted scalar indices rather than the full spatial structure of ionospheric convection. Here we train and compare three deep learning architectures, a probabilistic diffusion model conditioned on multi-variate solar wind and interplanetary magnetic field measurements at the L1 Lagrange point, an unconditioned diffusion ablation, and a deterministic U-Net baseline, to forecast Southern Hemisphere high-latitude electric potential maps derived from SuperDARN radar observations. Using five years (2020--2025) of SuperDARN data synchronised with DSCOVR L1 measurements, we evaluate the models under a single-pass regime, an extended autoregressive rollout of up to 350 frames, and an out-of-distribution case study on the intense March 2015 St.\ Patrick's Day storm, unseen during training. We find that the relative advantage of the deterministic and probabilistic approaches is not fixed: the deterministic model is competitive over short horizons and calm conditions, while the diffusion model's advantage grows and eventually dominates as the forecast horizon lengthens and the event becomes more dynamic, evidence that probabilistic, sample-based generative models are the more promising direction for operational, long-horizon space weather forecasting.

physics.space-ph↗

arXiv2026

Automated Solar Radio Burst Detection Using Deep Learning on Augmented e-Callisto Data

Solar radio bursts are signatures of energetic events associated with solar flares and coronal mass ejections and can interfere with terrestrial and space-based communication systems. Real-time automatic burst monitoring enables early warnings tens of minutes to hours before associated particles reach Earth and provides the basis for long-term statistical studies. The e-Callisto network is a worldwide system of solar radio spectrometers providing continuous observations, with its instruments collectively covering frequencies from approximately 20 MHz to 1 GHz. Burst detection and labeling currently rely largely on human experts, limiting scalability and real-time applicability due to hardware heterogeneity and low signal-to-noise ratios.

astro-ph.SR↗

arXiv2025

Karabo: A versatile SKA Observation Simulation Framework

Karabo is a versatile Python-based software framework simplifying research with radio astronomy data. It bundles existing software packages into a coherent whole to improve the ease of use of its components. Karabo includes useful abstractions, like strategies to scale and parallelize typical workloads or science-specific Python modules. The framework includes functionality to access datasets and mock observations to study the Square Kilometer Array (SKA) instruments and their expected accuracy. SKA will address problems in a wide range of fields of astronomy. We demonstrate the application of Karabo to some of the SKA science cases from HI intensity mapping, mock radio surveys, radio source detection, the epoch of re-ionisation and heliophysics. We discuss the capabilities and challenges of simulating large radio datasets in the context of SKA.

astro-ph.IM↗

arXiv2025

Enhancing Image Resolution of Solar Magnetograms: A Latent Diffusion Model Approach

The spatial properties of the solar magnetic field are crucial to decoding the physical processes in the solar interior and their interplanetary effects. However, observations from older instruments, such as the Michelson Doppler Imager (MDI), have limited spatial or temporal resolution, which hinders the ability to study small-scale solar features in detail. Super resolving these older datasets is essential for uniform analysis across different solar cycles, enabling better characterization of solar flares, active regions, and magnetic network dynamics. In this work, we introduce a novel diffusion model approach for Super-Resolution and we apply it to MDI magnetograms to match the higher-resolution capabilities of the Helioseismic and Magnetic Imager (HMI). By training a Latent Diffusion Model (LDM) with residuals on downscaled HMI data and fine-tuning it with paired MDI/HMI data, we can enhance the resolution of MDI observations from 2"/pixel to 0.5"/pixel. We evaluate the quality of the reconstructed images by means of classical metrics (e.g., PSNR, SSIM, FID and LPIPS) and we check if physical properties, such as the unsigned magnetic flux or the size of an active region, are preserved. We compare our model with different variations of LDM and Denoising Diffusion Probabilistic models (DDPMs), but also with two deterministic architectures already used in the past for performing the Super-Resolution task. Furthermore, we show with an analysis in the Fourier domain that the LDM with residuals can resolve features smaller than 2", and due to the probabilistic nature of the LDM, we can asses their reliability, in contrast with the deterministic models. Future studies aim to super-resolve the temporal scale of the solar MDI instrument so that we can also have a better overview of the dynamics of the old events.

astro-ph.SR↗

arXiv2024

A machine learning approach for computing solar flare locations in X-rays on-board Solar Orbiter/STIX

The Spectrometer/Telescope for Imaging X-rays (STIX) on-board the ESA Solar Orbiter mission retrieves the coordinates of solar flare locations by means of a specific sub-collimator, named the Coarse Flare Locator (CFL). When a solar flare occurs on the Sun, the emitted X-ray radiation casts the shadow of a peculiar "H-shaped" tungsten grid over the CFL X-ray detector. From measurements of the areas of the detector that are illuminated by the X-ray radiation, it is possible to retrieve the $(x,y)$ coordinates of the flare location on the solar disk. In this paper, we train a neural network on a dataset of real CFL observations to estimate the coordinates of solar flare locations. Further, we apply a post-training quantization technique specifically tailored to the adopted model architecture. This technique allows all computations to be in integer arithmetic at inference time, making the model compatible with the STIX computational requirements. We show that our model outperforms the currently adopted algorithm for estimating the flare locations from CFL data regarding prediction accuracy while requiring fewer parameters. We finally discuss possible future applications of the proposed model on-board STIX.

astro-ph.SR↗

arXiv2024

Magnetogram-to-Magnetogram: Generative Forecasting of Solar Evolution

Investigating the solar magnetic field is crucial to understand the physical processes in the solar interior as well as their effects on the interplanetary environment. We introduce a novel method to predict the evolution of the solar line-of-sight (LoS) magnetogram using image-to-image translation with Denoising Diffusion Probabilistic Models (DDPMs). Our approach combines "computer science metrics" for image quality and "physics metrics" for physical accuracy to evaluate model performance. The results indicate that DDPMs are effective in maintaining the structural integrity, the dynamic range of solar magnetic fields, the magnetic flux and other physical features such as the size of the active regions, surpassing traditional persistence models, also in flaring situation. We aim to use deep learning not only for visualisation but as an integrative and interactive tool for telescopes, enhancing our understanding of unexpected physical events like solar flares. Future studies will aim to integrate more diverse solar data to refine the accuracy and applicability of our generative model.

astro-ph.SR↗

arXiv2021

STIX X-ray microflare observations during the Solar Orbiter commissioning phase

The Spectrometer/Telescope for Imaging X-rays (STIX) is the HXR instrument onboard Solar Orbiter designed to observe solar flares over a broad range of flare sizes, between 4-150 keV. We report the first STIX observations of microflares recorded during the instrument commissioning phase in order to investigate the STIX performance at its detection limit. This first result paper focuses on the temporal and spectral evolution of STIX microflares occuring in the AR12765 in June 2020, and compares the STIX measurements with GOES/XRS, SDO/AIA, and Hinode/XRT. For the observed microflares of the GOES A and B class, the STIX peak time at lowest energies is located in the impulsive phase of the flares, well before the GOES peak time. Such a behavior can either be explained by the higher sensitivity of STIX to higher temperatures compared to GOES, or due to the existence of a nonthermal component reaching down to low energies. The interpretation is inconclusive due to limited counting statistics for all but the largest flare in our sample. For this largest flare, the low-energy peak time is clearly due to thermal emission, and the nonthermal component seen at higher energies occurs even earlier. This suggests that the classic thermal explanation might also be favored for the majority of the smaller flares. In combination with EUV and SXR observations, STIX corroborates earlier findings that an isothermal assumption is of limited validity. Future diagnostic efforts should focus on multi-wavelength studies to derive differential emission measure distributions over a wide range of temperatures to accurately describe the energetics of solar flares. Commissioning observations confirm that STIX is working as designed. As a rule of thumb, STIX detects flares as small as the GOES A class. For flares above the GOES B class, detailed spectral and imaging analyses can be performed.

astro-ph.SR↗

arXiv2013

CosmoHammer: Cosmological parameter estimation with the MCMC Hammer

We study the benefits and limits of parallelised Markov chain Monte Carlo (MCMC) sampling in cosmology. MCMC methods are widely used for the estimation of cosmological parameters from a given set of observations and are typically based on the Metropolis-Hastings algorithm. Some of the required calculations can however be computationally intensive, meaning that a single long chain can take several hours or days to calculate. In practice, this can be limiting, since the MCMC process needs to be performed many times to test the impact of possible systematics and to understand the robustness of the measurements being made. To achieve greater speed through parallelisation, MCMC algorithms need to have short auto-correlation times and minimal overheads caused by tuning and burn-in. The resulting scalability is hence influenced by two factors, the MCMC overheads and the parallelisation costs. In order to efficiently distribute the MCMC sampling over thousands of cores on modern cloud computing infrastructure, we developed a Python framework called CosmoHammer which embeds emcee, an implementation by Foreman-Mackey et al. (2012) of the affine invariant ensemble sampler by Goodman and Weare (2010). We test the performance of CosmoHammer for cosmological parameter estimation from cosmic microwave background data. While Metropolis-Hastings is dominated by overheads, CosmoHammer is able to accelerate the sampling process from a wall time of 30 hours on a dual core notebook to 16 minutes by scaling out to 2048 cores. Such short wall times for complex data sets opens possibilities for extensive model testing and control of systematics.

astro-ph.CO↗